Silvertone 1484
Manuals and User Guides for Silvertone 1484. We found 1 manuals for free downloads Owner's manual
Below you will find brief information for 1484. This manual provides comprehensive operating instructions, service data, and a repair parts list for your musical instrument amplifier. It details how to set up and use its two channels, including adjustments for volume, tone, and built-in effects like tremolo and reverberation. Additionally, it offers guidance on essential care, maintenance, and troubleshooting, such as replacing tubes and understanding fuse functions, to ensure optimal performance and longevity of your amplifier.
Key Features
Nesting cabinet design for convenient storage and transportation
Separate speaker cabinet allowing placement up to 25 feet away
Two independent input channels for versatile instrument connection
Channel Two equipped with adjustable Reverberation and Tremolo effects
Standby switch for quick warm-up between uses
Ground switch to minimize line hum
Accessible protective safety fuse on the back panel
Designed for 105-125 volt, 60 cycle A.C. power supply
Includes a dual foot switch for effect control
Vacuum tube amplifier design
Frequently Answers and Questions
How should the amplifier be placed to prevent damage?
Always slide the amplifier out from the speaker cabinet before turning it on to prevent severe damage from lack of ventilation. It can be placed within reach of controls, or on top of the speaker cabinet, which can be located up to 25 feet away.
What power supply is required for this amplifier?
This amplifier is designed for operation from a 105-125 volt, 60 cycle A.C. power supply. Never connect it to a power supply with a different voltage or frequency.
What is the purpose of the Standby switch?
The Standby switch allows the amplifier to remain warmed up during intermission periods, making it ready to operate immediately when needed without waiting for it to heat up again.
Why might loud noises occur when using the Reverberation feature?
The reverb unit contains microphone elements that are sensitive to vibration. Accidentally bumping the amplifier while reverb is in use may cause loud noises, which are harmless but can be startling.
What type of fuse should be used for replacement?
If the protective safety fuse blows out, it should be replaced only with a 2 ampere type 3 AG fuse after disconnecting the amplifier from the power supply.
How can I minimize line hum?
The ground switch is provided specifically for minimizing line hum, which helps to reduce unwanted electrical noise.
advertisement