280 Инструкции

Siqura HSD820

Инструкции и руководства для Siqura HSD820. Мы нашли 1 инструкции доступные для бесплатного скачивания Quick start Guide

Below you will find brief information for high-speed 1080p PTZ dome camera HSD820 HSD820. The Siqura HSD820 series is a high-speed 1080p PTZ dome camera that can be used for a variety of security applications. The camera includes a variety of features, including a wide-angle lens, a built-in microphone, and an SD card slot for recording video.

Ключевые особенности

high-speed 1080p PTZ dome camera
wide-angle lens
built-in microphone
SD card slot for recording video
network connector
alarm I/O
analogue video out
adjustable switch settings
secure mounting
wall mount installation

Страниц: 2 Siqura HSD820 Quick start Guide

Бренд: Siqura Категория: Security cameras Размер: 666 KB

Языки: English

Открыть мануал

Часто задаваемые вопросы

How do I prepare the HSD820 for installation?

Remove the outdoor tube adaptor, rotate to remove the protective cover, make note of the IP address, remove the PE cloth and take off the lens cap, apply lubricant to the optical cover's waterproof boot, loosen the screw head alignment pins, attach the optical cover.

How do I install the HSD820 with a wall mount?

Make a hole in the wall or metal access plate for the cables and secure the supplied cable gland in the wall. Ensure that the weather resistant gasket is correctly attached to the mount. Thread the cables through the wall mount and screw it onto the wall. Attach the waterproof boot to the wall mount. Thread the cables through the outdoor tube adaptor and fix it to the wall mount with the supplied screws and washers. Clip the safety wire to the dome camera. Block the cable entry hole with the supplied sponge. Connect the cables to the dome camera. Attach the dome to the outdoor tube adaptor and fasten them together with the supplied screws.

How do I log onto the camera?

Make an IP connection between the camera and the PC, type the IP address of the camera in the address bar of your web browser, enter the default user name (Admin) and password (1234), when prompted about an ActiveX control installation, right-click the information bar, and then click Install ActiveX control.