Snap-On MIG220
Manuals and User Guides for Snap-On MIG220. We found 1 manuals for free downloads Owner's manual
The Snap-On MIG220 is a versatile welding power source designed for light to medium metal fabrication. It combines a wire feed unit, MIG torch, and accessory package to provide efficient and reliable welding on steel and aluminum up to 5/16” thick. The unit offers various features like adjustable voltage and wire speed control for greater flexibility and control.
Key Features
- Combination power source/wire feeder
- Adjustable voltage control
- Adjustable wire speed control
- MIG torch included
- Gas regulator/flowmeter
- Duty Cycle: 60% @ 180 Amps, 20% @ 220 Amps
- Multi-process welding capabilities
Pages: 24 Snap-On MIG220 Owner's manual
Brand: Snap-On Category: Welding System Size: 1 MB
Languages: English
Table of contents
Open manualFrequently Answers and Questions
What types of wire can I use with the MIG220?
The MIG220 can use mild steel, stainless steel, aluminum, bronze, flux cored, and flux cored-gasless wires. The recommended wire for steel is ER70S-6.
What shielding gases are recommended for welding different materials?
For steel, use CO2 or Argon/CO2 mix (75% Argon/25% CO2 recommended). For aluminum and bronze, use Argon. For stainless steel, use 98% Argon/2% Oxygen. For flux cored, use CO2 or Argon/CO2 mix.
What is the duty cycle of the MIG220 and how does it affect welding?
The MIG220 has a duty cycle of 60% at 180 Amps and 20% at 220 Amps. This means it can operate at its rated amperage for 6 minutes out of 10 minutes before needing to cool down.
advertisement