Sokkia SET Total Station
Manuals and User Guides for Sokkia SET Total Station. We found 14 manuals for free downloads User manual, Owner's manual
Sokkia SET Total Station is an advanced surveying instrument designed for accurate and efficient data collection. With its user-friendly interface and comprehensive features, this device is ideal for a wide range of applications, including construction, surveying, and mapping. The Sokkia SET Total Station boasts exceptional accuracy, measuring angles with a resolution of up to 1" and distances with an accuracy of 2mm + 2ppm. It also features a built-in tilt sensor that automatically compensates for zenith angle, ensuring precise measurements even on uneven terrain. Sokkia SET Total Station comes equipped with various measurement modes, including angle measurement, distance measurement, stake-out, and remote elevation measurement. Additionally, it can calculate coordinates, horizontal distance between two points, and height differences. The device also includes a self-diagnostic function that alerts users to any potential errors, ensuring reliable operation. With its rugged construction and waterproof design, the Sokkia SET Total Station is built to withstand the demands of challenging outdoor environments. It is powered by a rechargeable battery that provides up to 16 hours of continuous operation.
Key Features
Measures angles with a resolution of up to 1" and distances with an accuracy of 2mm + 2ppm
Built-in tilt sensor automatically compensates for zenith angle
Multiple measurement modes, including angle measurement, distance measurement, stake-out, and remote elevation measurement
Calculates coordinates, horizontal distance between two points, and height differences
Self-diagnostic function alerts users to any potential errors
Rugged construction and waterproof design for use in challenging outdoor environments
Rechargeable battery provides up to 16 hours of continuous operation
Pages: 178 Sokkia SET Total Station User manual
Brand: Sokkia Category: Measuring, testing & control Size: 7 MB
Languages: English
Table of contents
Open manualOther manuals and documents
Frequently Answers and Questions
What is the angle resolution of the Sokkia SET Total Station?
The angle resolution can be set to either 1" (0.2 mgon) or 5" (1 mgon).
How does the Sokkia SET Total Station compensate for zenith angle?
The Sokkia SET Total Station has a built-in tilt sensor that automatically measures and compensates for the zenith angle.
What types of measurement modes does the Sokkia SET Total Station offer?
The Sokkia SET Total Station offers a variety of measurement modes, including angle measurement, distance measurement, stake-out, and remote elevation measurement.
Can the Sokkia SET Total Station calculate coordinates?
Yes, the Sokkia SET Total Station can calculate N- and E-coordinates.
How long does the battery of the Sokkia SET Total Station last?
The rechargeable battery of the Sokkia SET Total Station provides up to 16 hours of continuous operation.
Questions & Answers
A A A
How can the SET device be restored to factory settings?
There are two methods depending on what needs restoring. 1. Restoring Set Items to Initial Settings (without clearing data): Power OFF, then press and hold the {+ / -} key and the {ON} key simultaneously until "Checking... Default set" is displayed. 2. Initializing Data and Restoring Set Items (deletes all data): Power OFF, then press and hold the {+ / -} key, the {6} key, the {F4} key, and the {ON} key simultaneously until "Checking.... File clear" is displayed.
How to disable the tilt sensor on the device?
To disable the tilt sensor, navigate to the 'Configuration Mode', select 'Obs.condition', and then change the 'Tilt crn. (tilt correction)' setting to 'No'.
F F O
How to perform a 3x resection?
The provided operator's manual does not contain a section specifically detailing a "3x resection" procedure. It describes resection measurement in Section 12. To perform a resection, follow the steps outlined in Section 12 and adapt the instructions accordingly for the number of points used.
Y Y N
How to determine the distance between two points without moving the instrument?
To determine the distance between two points without moving the instrument, use the Missing Line Measurement function. First, sight the reflecting prism on the starting position (P1). In the 1st page of EDM mode, select the desired distance type (Sdist, Hdist, or Vdist), press the key to start the measurement, then press STOP. Next, sight the reflecting prism on the target station. Navigate to the 3rd page of the mode and press MLM to start the missing line measurement. Finally, press STOP to display the slope distance, horizontal distance, and height difference between the points.
X X L
What are Face Left and Face Right positions on a total station?
Face Left (Face 1) is the normal measurement position. Face Right (Face 2) is achieved by rotating the instrument 180 degrees and transitting (flipping) the telescope. Using both positions helps eliminate vertical index errors and verify the adjustment of the reticle and telescope alignment.
F F N
What is the procedure for setting-out measurement using the coordinate method?
To perform coordinate setting-out measurement, initiate S-O mode, input instrument station data, set the backsight azimuth angle, select S-O data until
What is the function of the [READ] button on the device?
The [READ] button is used to recall registered coordinate data, allowing users to select known points or coordinates saved in the current JOB or Coordinate Search JOB for use in various setup and measurement functions.
What data does the [REC] button record?
The [REC] button records data into the current JOB, including measurement data (distance, angle, coordinates), instrument station data (coordinates, height), backsight data (azimuth, coordinates), and notes.
advertisement