Tektronix 547
Manuals and User Guides for Tektronix 547. We found 1 manuals for free downloads instruction manual
The Tektronix 547 Oscilloscope is a versatile instrument designed for use with Tektronix 1-Series plug-in units. It offers a range of features, including dual time-base generators for viewing single or multiple signals, calibrated sweep rates, sweep magnification, and delayed sweep operation for precise time measurements.
Key Features
Dual time-base generators
Calibrated sweep rates
Sweep magnification
Delayed sweep operation
Trigger source selection
Trigger coupling selection
External single sweep reset
Amplitude calibrator
5 mA current loop
Pages: 183 Tektronix 547 instruction manual
Brand: Tektronix Category: Power conditioning Size: 31 MB
Languages: English
Open manualFrequently Answers and Questions
What is the purpose of the DELAY-TIME MULTIPLIER control?
The DELAY-TIME MULTIPLIER control is used in conjunction with the TIME/CM or DELAY TIME control of the Main Time Base (B) to vary sweep delay from 0.15 to 10.15 times the rate indicated by the Main Time Base (B) TIME/CM or DELAY TIME switch.
How do I select the trigger source for the oscilloscope?
You can select the trigger source using the SOURCE switch. Options include internal normal, internal plug-in, external, and line.
What is the difference between the AUTO STABILITY and TRIG positions on the MODE switch?
The AUTO STABILITY mode allows for normal triggering on signals with repetition rates above 20 cps. In the TRIG position, the time base only triggers when a triggering signal is present, resulting in no trace when the signal is removed.
What is the purpose of the SWEEP MAGNIFIER switch?
The SWEEP MAGNIFIER switch expands the sweep from the center of the graticule at any setting of the TIME/CM switch by the amount indicated (2X, 5X, or 10X).
advertisement