Tektronix ADA400A
Manuals and User Guides for Tektronix ADA400A. We found 5 manuals for free downloads instruction manual, User manual, Reference guide
Below you will find brief information for Differential Preamplifier ADA400A. This manual details the ADA400A's features, including selectable gains (X100, X10, X1, X0.1), high common-mode rejection, and a bandwidth exceeding 1 MHz. Learn how to connect it to an oscilloscope, adjust settings, and troubleshoot issues. It's designed for measuring low-amplitude voltages and signals lacking a ground reference, ideal for transducers and sensitive devices.
Key Features
Selectable gains (X0.1, X1, X10, X100)
High common-mode rejection (≥100,000:1)
Bandwidth >1 MHz with selectable limits
High input impedance (1 MΩ, selectable infinite)
Adjustable differential offset
TEKPROBE interface
Pages: 76 Tektronix ADA400A instruction manual
Brand: Tektronix Category: Industrial & lab equipment Size: 2 MB
Languages: English
Open manualOther manuals and documents
Frequently Answers and Questions
How do I connect the ADA400A to my oscilloscope?
If your oscilloscope has a TEKPROBE interface, connect the ADA400A's output directly. For oscilloscopes without this interface, use the 1103 TEKPROBE Power Supply.
What input impedance should I use?
The ADA400A has a 1 MΩ input impedance. For high impedance sources, select the 'infinite Ω' setting (requires internal jumper adjustment).
How do I adjust for DC offset?
Set input coupling to GND, then switch offset controls ON. Use the COARSE and FINE controls to center the oscilloscope display.
What are the input voltage limitations?
Do not exceed 40V (DC + peak AC) between any input and ground, or 80V (DC + peak AC) differentially.
advertisement