Tenda Router
Manuales y guías de usuario para Tenda Router. Encontramos 9 manuales para descargas gratuitas User manual, User Guide
Below you will find brief information for router. The router supports static IP assignments, DHCP client list, network security settings, bandwidth control, advanced applications like DDNS, Port Forwarding, and more. It also has tools for managing time and date, upgrading firmware, backing up and restoring configurations, and resetting to factory default settings. This device will help you to connect your network devices and share resources with others.
Características clave
Static IP assignment
DHCP client list
Network security settings
Bandwidth control
DDNS
Port Forwarding
DMZ Host
UPnP
Firmware upgrade
Backup and restore configurations
páginas: 53 Tenda Router User manual
Marca: Tenda Categoría: Routers Tamaño: 2 MB
Idiomas: English
Abrir manualOtros manuales y documentos
Frequently Answers and Questions
I cannot access the device's management interface. What should I do?
Make sure the power LED on the device's front panel is on and the SYS LED blinks normally. Make sure all cables are correctly connected and the corresponding LAN LED on the device is on. Verify that your PC's TCP/IP settings are configured correctly. If you select the "Use the following IP address" option, set your PC's IP address to any IP address between 192.168.2.2~192.168.2.254. Or you can select the "Obtain an IP address automatically" option. Delete your browser cache and cookies or use a new browser. Make sure you enter 192.168.2.1 in the address bar. Open your browser and click Tools -> Internet Options -> Connections -> LAN Settings, uncheck the Use a proxy server for your LAN option. Press the WPS/RST button for about 10 seconds to restore your device to factory default settings. Then log to your device again.
I changed the login password and unfortunately forget it. What should I do?
Press the WPS/RST button for over 7 seconds to restore your device to factory default settings.
My computer shows an IP address conflict error after having connected to the device. What should I do?
Make sure there are no other DHCP servers on your LAN or other DHCP servers are disabled. Make sure the device's LAN IP is not used by other devices on your LAN. The device's default LAN IP address is 192.168.2.1. Make sure the statically assigned IP addresses to the PCs on LAN are not used by others PCs.
I have problems connecting to Internet/Secure websites do not open or displays only part of a web page. What should I do?
This problem mainly happens to users who use the PPPoE or Dynamic IP Internet connection type. You need to change the MTU size. Try changing the MTU to 1450 or 1400. If this does not help, gradually reduce the MTU from the maximum value until the problem disappears.
Anuncio