Tenma 72-8400

Manuals and User Guides for Tenma 72-8400. We found 1 manuals for free downloads Operating manual

Below you will find brief information for multimeter 72-8400. The 72-8400 is a multimeter with a 3999 count, 3 3/4 digit device, which adopts digital control techniques with oscilloscope and multimeter functions all in one. It has a bandwidth of 8MHz and a real-time sample rate of 40MS/s. This makes it ideal for measuring AC/DC engine, transducer, circuit, control, UPS, and industrial equipment.

Key Features

  • 3999 count, 3 3/4 digit multimeter

  • Includes oscilloscope and multimeter functions

  • Bandwidth of 8MHz

  • Real-time sample rate of 40MS/s

  • Measure AC/DC engine, transducer, circuit, control, UPS, and industrial equipment

Pages: 54 Tenma 72-8400 Operating manual

Brand: Tenma Category: Measuring, testing & control Size: 1 MB

Languages: English

Open manual

Frequently Answers and Questions

What are the key features of the 72-8400 multimeter?

The 72-8400 has a 3999 count, 3 3/4 digit display, includes both oscilloscope and multimeter functions, has a bandwidth of 8MHz, and a real-time sample rate of 40MS/s. It is ideal for measuring AC/DC engine, transducer, circuit, control, UPS, and industrial equipment.

What is the maximum voltage that can be measured with the 72-8400?

The maximum voltage that can be measured with the 72-8400 is 1000V DC or AC, but it is important to note that this is the maximum voltage that the device can withstand. It is best to check the specific voltage ratings of the device and the circuit being tested to avoid any damage or injury.

How do I replace the fuses on the 72-8400 multimeter?

To replace the fuses, remove the battery compartment, then remove the case bottom screws and separate the case bottom from the top. Remove the fuse by gently prying one end loose and then take it out of the bracket. Install ONLY replacement fuses with the identical type and specification as follows and make sure the fuse is fixed firmly in the bracket: Fuse 1: F0.5AH/250V, ø5 x 20mm Fuse 2: F10AH/250V, ø5 x 20mm

advertisement