Thermo T 20 P
Manuals and User Guides for Thermo T 20 P. We found 1 manuals for free downloads Operating instructions
The T 6 P, T 12 P, and T 20 P Drying Ovens are designed for laboratory use. They can be used for various applications such as drying, ageing, analysis, fusing, burning in, oxidizing, reducing, preheating, and hot-air sterilization. The ovens are equipped with a programmed controller and can be set to operate at temperatures between room temperature + approx. 10°C and 250 °C. The ovens are also designed for continuous use and feature an independent overtemperature protection device, which means they do not require constant supervision.
Key Features
Programmed controller
Temperature range: 10°C - 250°C
Continuous use
Independent overtemperature protection
Hot-air sterilization
Various applications (drying, ageing, analysis, etc.)
Pages: 35 Thermo T 20 P Operating instructions
Brand: Thermo Category: Electrical equipment & supplies Size: 204 KB
Languages: English
Open manualFrequently Answers and Questions
How do I set the operating temperature?
To set the operating temperature, press the "set" key until the temperature flashes. Then use the "+" and "-" keys to adjust the temperature. Once the desired temperature is reached, press the "set" key to save it.
What is the purpose of the overtemperature protection device?
The overtemperature protection device is an independent safety feature that shuts down the oven's heating system if the temperature exceeds a preset value. This helps to prevent damage to the oven and its surrounding environment.
How do I use the time-switch function?
To use the time-switch function, press the "set" key until the time flashes. Then use the "+" and "-" keys to adjust the time. Once the desired time is reached, press the "set" key to save it.
Questions & Answers
A A A
Where can I find the electrical schematic for the T6P oven?
The electrical schematic for the T6P oven is available as an approved spare part or accessory. You can locate the order numbers for the circuit diagrams in the 'Approved spare parts / accessories' section of the manual. For 1/PE AC, 230 V/208V, the order number is 50 041 987. For 1/PE AC, 120 V, the order number is 50 040 640.
What is the recommended relative humidity for operating the device?
The recommended relative humidity for operation is between 60 and 70%, avoiding condensation. The maximum relative humidity is 80% for temperatures up to 31°C, decreasing linearly to 50% relative humidity at 40°C.
advertisement