1. manualzz.com
  2. computers & electronics
  3. networking

Toshiba FDP2 F-PE

Manuals and User Guides for Toshiba FDP2 F-PE. We found 1 manuals for free downloads Installation and operating instructions

Below you will find brief information for air conditioner interface FDP2 F-PE. The FDP2-F is a monitoring and control interface for the Toshiba Digital Inverter, SHRM and SMMS range of air-conditioners. It detects all indoor and outdoor faults occurring in TCC-NET compatible Toshiba air-conditioners and reports them by closing relay contacts R1-R2. The FDP2-F can be connected to form large groups of units controlled from a single remote controller. Pairs of FDPs can operate duty/standby control with 24 hour alternating duty, and changeover on fault. Control can be achieved through potentiometer and volt-free contact inputs as well as via BMS integration.

Key Features

  • Fault reporting
  • Group control
  • Duty/Standby operation
  • Hardwired control
  • Custom control
  • Preset operation

Toshiba FDP2 F-PE Installation and operating instructions

Brand: Toshiba Category: Networking Size: 313 KB

Languages: English

Open manual

Frequently Answers and Questions

What is FDP2?
The FDP2-F is a monitoring and control interface for the Toshiba Digital Inverter, SHRM and SMMS range of air-conditioners.
What are the functions of FDP2-F?
The FDP2-F interface detects all indoor and outdoor faults occurring in TCC-NET compatible Toshiba air-conditioners and reports them by closing relay contacts R1-R2. It also allows for group control, duty/standby operation, hardwired control, custom control and preset operation.
How many units can FDP2-F control?
The FDP2-F can detect faults for up to 8 units and can be used to form large groups of units controlled from a single remote controller.
How does FDP2-F connect to the air conditioner?
The FDP2-F is connected to the TCC-NET network with or without a standard remote controller and detects any faults that can be displayed on the controller.
What are the different modes of operation for FDP2-F?
The FDP2-F has a number of standard configurations that can be set using switches SW1 to SW7. Factory configuration is configured with all switches OFF. In this mode the FDP2 operates as a standard fault monitoring device. Additional preset modes are available using SW1 and SW2 to operate the system in preset Heat, Cool and Auto modes.

advertisement