Touchpoint Door Contact

Manuals and User Guides for Touchpoint Door Contact. We found 1 manuals for free downloads instruction manual

Below you will find brief information for alarm control panel 9454, remote keypad 9425, digital communicator 8440, external sounder SAB, external sounder SCB, door contact, PIR detector, extension speaker 9040. The 9454 Alarm Control Panel is a fully programmable 5 zone control panel designed to meet the requirement of both domestic and small commercial installations. The control panel also incorporates separate circuit connections for the Exit/Entry, Panic Alarm and individual zone Anti-tamper circuits. The system may be set with the detection fitted to zone 1, 2, 3, 4 & 5 either On or Off., these circuits can be 'Omitted'. The user and engineer can perform system programming and operation from strategic locations within the premises. The keypads can be located at any convenient position for the user, providing they are within the protected area.

Key Features

  • Fully programmable 5 zone control panel
  • Separate circuit connections for Exit/Entry, Panic Alarm
  • Individual zone Anti-tamper circuits
  • Remote Keypads for system operation and programming
  • Supports up to two Remote Keypads
  • Auto-re-arm feature
  • Abort facility
  • Keypad PA operation

Pages: 33 Touchpoint Door Contact instruction manual

Brand: Touchpoint Category: Door intercom systems Size: 176 KB

Languages: English

Open manual

Frequently Answers and Questions

How do I program the system?
Refer to section 13 of the instruction manual for detailed programming instructions.
What is the default engineer code?
The factory default engineer code is '0' followed by 'ENTER' then '7890'.
How do I connect the external sounder?
Refer to section 9 of the instruction manual for wiring diagrams and instructions.

advertisement