Tragant M3 ATX

Manuals and User Guides for Tragant M3 ATX. We found 1 manuals for free downloads installation Guide

Below you will find brief information for M3 ATX. This intelligent ATX power supply is designed to provide a reliable and stable power source for your vehicle-based computer. It works with a wide range of motherboards, including VIA mini-ITX, Pentium-M/Celeron, and full power Pentium systems. The unit includes features such as undervoltage and overvoltage protection, a deep discharge shutdown threshold, and an anti-thump control for use with amplifiers. The M3 ATX can be configured with different shutdown delay settings to optimize battery life.

Key Features

  • 6-24V input voltage range
  • Intelligent ATX power supply
  • Under-voltage and over-voltage protection
  • Deep discharge shutdown threshold
  • Anti-thump control for amplifier use
  • Configurable shutdown delay settings
  • Works with various motherboards
  • Power sequencer functionality
  • 5VSB power rail management
  • Efficient power conversion

Pages: 5 Tragant M3 ATX installation Guide

Brand: Tragant Category: Uninterruptible power supplies (UPSs) Size: 242 KB

Languages: English

Open manual

Frequently Answers and Questions

How does the M3 ATX protect against deep battery discharge?
The M3 ATX monitors battery levels and has a deep discharge shutdown threshold of 11.2V. If the battery voltage drops below this threshold for more than a minute, the M3 ATX will shut down to prevent further battery drain.
What is the purpose of the anti-thump control?
The anti-thump control prevents a loud pop from your car amplifier when the PC starts. Connect the white wire from the M3 ATX cable harness to your amplifier's remote control pin to activate this feature.
Can I use the cigarette lighter socket as a power source?
It's not recommended to use the cigarette lighter socket as a power source because the contacts may not be able to deliver sufficient current to your PC. Use a dedicated power source with proper wiring and connectors.
What is the recommended setting for the M3 ATX's shutdown delay?
The recommended setting is P1, which shuts down the motherboard 5 seconds after ignition is turned off and waits another minute before shutting down the 5VSB rail to conserve battery.
How do I reset the M3 ATX to factory defaults?
To reset the M3 ATX to factory defaults, power off the unit, connect a jumper as shown in the manual, power back up, and wait for the LED to flash rapidly.

advertisement