Trane 018N
Manuals and User Guides for Trane 018N. We found 1 manuals for free downloads installation Guide
Below you will find brief information for Wiring Diagram 018N, Wiring Diagram 019N, Wiring Diagram 024N, Wiring Diagram 025N, Wiring Diagram 030N, Wiring Diagram 036N, Wiring Diagram 042N, Wiring Diagram 048N, Wiring Diagram 049N, Wiring Diagram 060N. This document provides a wiring diagram for compressor units, including instructions for installing an Easy Start component. It specifies the correct wiring connections between the compressor, contactor, and run capacitor. It also emphasizes the removal of existing start components and the use of properly rated connectors.
Key Features
600VAC rated connectors
Easy Start installation instructions
Compressor wiring diagram
Run capacitor connection guide
Start component removal instruction
Pages: 2 Trane 018N installation Guide
Brand: Trane Category: Electrical equipment & supplies Size: 1 MB
Languages: English
Open manualFrequently Answers and Questions
What rating should all connectors used have?
All connectors used must be 600VAC rated.
What needs to be removed before installing Easy Start?
All start component connections and wires need to be removed.
Where does the Easy Start Black wire connect?
The Easy Start Black wire connects to the compressor common (C) on the contactor behind the screwhead.
Where does the Easy Start Orange wire connect?
The Easy Start Orange wire connects to the run-capacitor Herm (H) position.
Where does the Easy Start Brown wire connect?
The Easy Start Brown wire is spliced to the removed compressor run (R) wire.
Where does the Easy Start White wire connect?
The Easy Start White wire connects to the contactor behind the screwhead where the previous run (R) wire was connected.
advertisement