221 Manuals

Tru-Test Unigizer Solar System

Manuals and User Guides for Tru-Test Unigizer Solar System. We found 1 manuals for free downloads Installation manual

Below you will find brief information for Solar System Unigizer Solar System, Solar Kit Solar Kit. This manual provides instructions for installing the Tru-Test Unigizer Solar System and the Solar Kit. The system includes a solar panel, energizer, battery, and mounting bracket. The kit includes a solar panel and mounting bracket. The Unigizer Solar System is designed for use with electric fences and is ideal for areas where there is minimal access to mains power. The Solar Kit is ideal for use with electric fences and can be used to supplement a mains powered energizer. Both systems are easy to install and operate.

Key Features

Easy to install (around 15 minutes)
Automatic operation
Maximum power point tracking technology
Over-current and reverse battery protection
Designed for use with electric fences
Ideal for areas with minimal access to mains power

Unigizer Solar System, Solar Kit Installation Manual

Pages: 5 Tru-Test Unigizer Solar System Installation manual

Brand: Tru-Test Category: Electrical equipment & supplies Size: 678 KB

Languages: English

Open manual

Frequently Answers and Questions

What are the components included in the Unigizer Solar System?

The Unigizer Solar System includes a Unigizer mains/battery energizer, a solar panel and mounting bracket, an accessories and spares bag (mounting screws, spare fuses etc), a compass, an inclinometer (angle finder), a battery, and a battery box.

What are the components included in the Solar Kit?

The Solar Kit includes a 20, 30 or 40 W solar panel and mounting bracket, an accessories and spares bag (mounting screws, spare fuses etc), a compass, an inclinometer (angle finder), a battery, and a battery box.

What tools do I need to install the Unigizer Solar System or Solar Kit?

You will need a small hammer, a 13 mm spanner, a 10 mm spanner or 10 mm nut driver, and a marker pen.

How do I set the solar panel tilt angle?

The ideal tilt angle will vary depending on the location of the installation site. The table opposite shows the latitude and tilt angle for the main centres. Place the inclinometer (angle finder) on the face of the solar panel as shown. Using the table opposite, note the main centre closest to your location and tilt the solar panel to the appropriate angle. Use the 13 mm spanner to lightly tighten the tilt angle setting nut. Double-check the angle setting and then firmly tighten the setting nut. Check that the solar panel cannot move at all. If there is any movement then readjust and tighten.

What is the charging control of the solar panel?

In good sunlight, the solar panel will "boost" charge the battery. If the battery voltage rises to 14.5 V, the battery is fully charged and the charging module will reduce the charge voltage to a maintenance "float" voltage of 13.5 V. If the battery voltage drops down below 13.2 V, the "boost" cycle will restart.

What happens if the battery is connected in reverse?

In the rare situation that the 12 V battery is connected in reverse, the safety protection fuse on the charging module will blow to prevent damage. This 2 A glass fuse must be replaced before the Solar System can be used.