Twin Tec Twin Scan II Plus

Manuals and User Guides for Twin Tec Twin Scan II Plus. We found 1 manuals for free downloads User Instructions

Below you will find brief information for Twin Tuner 16100, Twin Tuner 16104, Twin Tuner 18014, Twin Tuner II and Twin Scan II Plus. This document describes the installation process, initial setup, and basic and advanced tuning of these devices. You can use these devices to adjust your fuel injection to match the requirements of performance parts, including camshafts, free flowing exhausts, and low restriction air filters.

Key Features

  • Easy installation
  • Provides fuel adjustments
  • Compatible with various models
  • Advanced tuning with PC software
  • Works with optional USB interface
  • Precise fuel corrections
  • Independent adjustments for front and rear cylinders
  • Data logging and analysis capabilities
  • User-friendly interface with LED display
  • Compact and moisture-proof design

Pages: 12 Twin Tec Twin Scan II Plus User Instructions

Brand: Twin Tec Category: Motor vehicle electronics Size: 383 KB

Languages: English

Open manual

Frequently Answers and Questions

How do I install the Twin Tuner?
The installation process involves disconnecting the battery, locating the ECM, removing five wires from the ECM connector, inserting new wires from the Twin Tuner into the ECM connector, and connecting a ground wire. Refer to the instructions in the document for detailed steps.
What are the different operating modes of the Twin Tuner?
The Twin Tuner offers both basic and advanced modes. In basic mode, fuel trim adjustments are made through the switch settings on the unit. In advanced mode, you can utilize the optional USB interface and PC Link Tuner software to make more precise adjustments using 3D tables.
What is the purpose of the acceleration enrichment feature?
Acceleration enrichment provides additional fuel during acceleration to improve throttle response and prevent lean conditions. The Twin Tuner allows you to adjust the acceleration enrichment level to fine-tune the engine performance.
Can I use the Twin Tuner with motorcycles that have oxygen sensors?
Yes, the Twin Tuner is compatible with motorcycles equipped with oxygen sensors. However, the ECM might control the air/fuel ratio in closed loop during idle and part throttle cruise. In such cases, the Twin Tuner can be used to make adjustments at wide open throttle.
How do I determine the proper initial settings for the Twin Tuner?
The recommended initial settings for the Twin Tuner depend on the motorcycle model and modifications. Refer to the Appendix in the document for detailed tables and guidance on initial setup.
What is the purpose of the PC Link Tuner software?
PC Link Tuner software allows you to download and upload data from the Twin Tuner, edit 3D tables, and view real-time engine data. This software provides a more advanced level of tuning for the Twin Tuner.
How do I troubleshoot decel popping?
Decel popping can be resolved by modifying fuel values at closed throttle above the idle RPM range. This requires the use of the USB interface and PC Link Tuner software. Refer to the Twin Tuner Tech FAQ on Daytona Twin Tec's website for more detailed instructions.

advertisement