Universal Tool UT4425A-4

Manuals and User Guides for Universal Tool UT4425A-4. We found 1 manuals for free downloads User manual

Below you will find brief information for angle cut-off tool UT4425A-4. This tool is designed to operate on 90 PSIG. It features a safety lock-off mechanism and can be used for grinding and deburring. The tool is equipped with a 3/8" spindle that accepts ANSI approved grinding stones, and it has a free speed of 13,500 RPM.

Key Features

  • Safety lock-off mechanism
  • 3/8" spindle
  • Free speed of 13,500 RPM
  • Designed for 90 PSIG
  • Accepts ANSI approved grinding stones

Pages: 8 Universal Tool UT4425A-4 User manual

Brand: Universal Tool Category: Power tools Size: 1 MB

Languages: English

Open manual

Frequently Answers and Questions

How do I install a grinding wheel or cut-off wheel?
Disconnect the tool from the air supply. Remove the flange nut using a 17 MM wrench and an 11 MM wrench. Mount the grinding wheel on the spindle and replace the flange nut, tightening it with the wrenches.
What is the recommended air pressure for this angle grinder?
The recommended air pressure is 90 PSIG.
What type of lubrication is recommended for this tool?
Air tool oil or any other high-grade turbine oil containing a moisture absorbent, rust inhibitors, metal wetting agents, and an EP (extreme pressure) additive.

advertisement