Vasco Authentication Server

This device helps to manage and configure SNMP functionality. It acts as an SNMP manager and allows you to browse the MIBs, perform SNMP get, walk, and bulkwalk requests on a group of OIDs, and act as an SNMP trap daemon. It also helps to obtain information from the MIB and receive SNMP traps.

You can install SNMPb on a separate machine. You need to create an SNMPv3 USM profile, create an agent profile, load the required MIBs, and set the binding trap port to 162.

You can activate this features through the IAS configuration utility by enabling the system monitoring and performance monitoring checkboxes.

To poll for this information, navigate to the OID of your choice in SNMPb, right-click and select Get, Get Bulk as indicated in the screenshot below.

In SNMPb, create an USM profile matching the settings specified in the IAS monitoring target. You can find the instructions in the SNMBb installation and configuration section of the document.

Create a monitoring filter using the IDENTIKEY Authentication Server Configuration utility and assign the SNMP trap target to it. Then perform an action that triggers the rule to generate a trap.