Visioneer OneTouch 5600

You need an IBM PC (or 100-percent compatible) Pentium or equivalent, Microsoft Windows 98, Windows 2000, or Windows Me, one available USB port on your computer, 32 MB or more of available RAM, 70 MB of free hard disk space, a VGA or SVGA monitor (recommended settings for your monitor are as many colors as possible—High Color (16-bit), True Color (24-bit or 32-bit). Set the resolution to at least 800 by 600 pixels), and a CD-ROM drive.

Insert the CD into your CD-ROM drive. The CD automatically starts. If the CD does not automatically start, make sure the CD drive’s door is completely shut. If the CD still doesn’t start, double-click the Windows icon that shows the drives on your computer. (Usually, the icon is named My Computer.) Double-click the icon for your CD-ROM drive to see the list of files on the CD. Double-click the file named START32.EXE. The CD starts. When the CD window appears, click the PaperPort Deluxe button and follow the instructions on the screen to install the scanner software on your computer.

If the scanner icon on the Windows taskbar has a red “X” through it, the scanner is not properly connected. Check for one of these possible problems: Is a cable loose or not plugged in securely? Inspect all cable connections. Make sure all the cables are plugged in securely Is the scanner’s power light on? Turn on the scanner’s power. If the light still doesn’t come on, plug the power adapter into another electrical outlet. Is the scanner’s locking tab in the locked position? Slide the locking tab to the unlocked position. If you tried to scan with the scanner locked, you must restart your computer after unlocking the scanner. Did you restart the computer after installing the software? If you didn’t restart the computer, it may not have loaded all of the software files. Try restarting your computer.