Weishaupt WRSol 2.0

Manuals and User Guides for Weishaupt WRSol 2.0. We found 3 manuals for free downloads Manual, Operation manual, Installation commissioning notice

Below you will find brief information for WRSol 2.0. This solar controller allows for easy control of your solar system, offering features like temperature setpoint defaults for DHW, frost protection, and calorifier, along with easy resets to factory settings. It can be used as a differential controller for solar DHW storage tanks, calorifier storage tanks, return temperature maintenance, swimming pools, solid fuel systems, and storage tank cascade configurations. With its multi-function output, you can reset faults, initiate burner interlocks, or request exchanger releases.

Key Features

  • Easy interrogation of solar system information.

  • Temperature setpoint defaults for various functions.

  • Easy reset to previously set values or factory settings.

  • Speed controlled solar and/or solid fuel boiler pump.

  • Recording possible with WRSol recording software.

  • Can be used as differential controller

Pages: 98 Weishaupt WRSol 2.0 Manual

Brand: Weishaupt Category: Measuring, testing & control Size: 1 MB

Languages: English

Open manual

Other manuals and documents

84 Pages

Operation manual

Languages: German

48 Pages

Installation commissioning notice

Languages: French

Frequently Answers and Questions

What does the Weishaupt solar controller WRSol 2.0 do?

If programmed correctly, the controller, in conjunction with the relevant hydraulic switching, will ensure that the solar energy available is used correctly and that the need for additional heat exchangers is largely avoided.

What should I observe when using the WRSol 2.0?

Do not switch off the controller, as this can damage the solar system, especially if it's filled with water, due to the loss of frost protection. Only shut down the controller during service or repair work.

What is the potential free Multi-funct. Output (MFA) used for?

With the potential free contact (MFA output terminals 5 and 6) a fault can be reset, and a burner interlock (exchanger interlock) or a request (exchanger release) can be initiated.

advertisement