WinSystems PPM-GIGABIT-G

WinSystems PPM-GIGABIT-G is a high-performance PC/104-Plus compliant Gigabit Ethernet module that provides flexible, high-performance Ethernet networking capability. It supports 10, 100, and 1000 Mbps full- and half-duplex operation with automatic switching between speeds. The module utilizes the Intel 82541ER Gigabit Ethernet PCI Controller and offers many features like IEEE 802.3ab Auto-Negotiation support, IEEE 802.3x-compliant flow control support, jumbo frames support, adaptive equalization, and more. It has an onboard RJ-45 connector for Ethernet network connection and LEDs for visual indication of link status, network activity, and network speed. The PPM-GIGABIT-G is designed to support either 5V or 3.3V PC/104-Plus signaling and can be installed in any slot position on a PC/104-Plus stack. It comes with an EEPROM programmed with configuration information and emulates the popular Intel Pro/1000 PCI board for driver compatibility. The module operates from -40° to +85°C and has dimensions of 3.6" x 3.8" (90mm x 96mm). It requires a single +5V power input and consumes typically TBD mA. For more information, refer to the WinSystems PPM-GIGABIT-G manual, which provides detailed instructions on installation, configuration, and operation.