2203 Manuals

Wolf Cooktop

Manuals and User Guides for Wolf Cooktop. We found 3 manuals for free downloads Installation instructions, Owner's manual, Manual

Below you will find brief information for downdraft DD30I, downdraft DD36I, downdraft DD30R, downdraft DD36R. These downdrafts are designed to be used to exhaust airborne contaminate when cooking with a variety of gas or electric cooktops. They can be mounted in an island, peninsula, or conventional wall location. They require a 120 VAC, 60 Hz circuit and a 3-1/4” x 10” or 3-1/4” x 14” ductwork depending on what model you purchase.

Key Features

exhaust airborne contaminate
island, peninsula, or conventional wall location
120 VAC, 60 Hz circuit
3-1/4” x 10” or 3-1/4” x 14” ductwork

Wolf Downdraft DD30I, DD36I, DD30R, DD36R Installation Instructions

Pages: 12 Wolf Cooktop Installation instructions

Brand: Wolf Category: Electrical equipment & supplies Size: 478 KB

Languages: English

Open manual

Frequently Answers and Questions

Where can I find the model and serial numbers for my downdraft?

The model and serial numbers are listed on the rating plate, located above the airbox on the front side of the unit.

What size countertop opening do I need for my downdraft?

Refer to the cooktop installation instructions for dimensions of cooktop, countertop cut-out, and cabinet requirements. The DD30I and DD30R will fit in most 30" wide cabinets and the DD36I and DD36R will fit in most 36" wide cabinets. However, it is recommended that oversized cabinets be used for easier installation.

What type of ductwork is recommended for my downdraft?

The downdraft blower system is designed for use with 3-1/4” x 10” (DD30I or DD36I) or 3-1/4” x 14” ductwork (DD30R or DD36R) and each can be transitioned to 8" or 10" round. Three different discharge directions are available with side-to-side adjustment for accurate alignment of ductwork. Your Wolf downdraft system is most efficient when used with 10" round ductwork.