16518 Manuals

Yamaha MOTIF ES

Manuals and User Guides for Yamaha MOTIF ES. We found 13 manuals for free downloads Setup Guide, User Guide, User manual, Owner's manual, Manual

Below you will find brief information for Musical Equipment Motif ES, mLAN Card mLAN16E, Software Logic. This guide will help you connect and configure your Motif ES with the mLAN16E card and use it as a direct MIDI/AUDIO interface with Logic Software. You can set up your Motif ES as a control surface for Logic and can use the Motif ES as a 16 output/8 input firewire audio interface.

Key Features

Motif ES with mLAN16E card for direct MIDI/AUDIO interface
mLAN network for music simplifies cabling
16 audio outputs and 8 audio inputs over a single cable
Word Clock synchronization for multiple digital devices
MIDI communication via 4 ports
Motif ES as a control surface for Logic
mLAN Auto Connector for connection setup
Core Audio and Core MIDI services for integration with Mac
Assignable outputs and mLAN Monitor Switch for advanced routing
System Effects and Dual Insertion Effects for audio processing

Pages: 12 Yamaha MOTIF ES Setup Guide

Brand: Yamaha Category: Musical Equipment Size: 1 MB

Languages: English

Open manual

Frequently Answers and Questions

How do I connect my Motif ES to my computer using mLAN?

Connect the mLAN16e firewire port on your Motif ES to the firewire port on your Apple computer. Then, set MIDI IN/OUT to "mLAN" on your Motif ES and start the "mLAN Auto Connector" software. Select "Devices/Motif ES/Properties" and configure the settings as needed. Finally, select "mLAN Auto Connect" and set your sample rate.

What is the role of the mLAN Monitor Switch on the Motif ES?

The mLAN Monitor Switch allows you to choose between hearing the signal being routed to your digital audio workstation (mLAN Monitor Switch ON) or the signal after the send to the recorder (mLAN Monitor Switch OFF). This helps you hear what is being sent to your record track and what is being monitored in your speakers.

How can I use my Motif ES as a control surface for Logic?

Set the Motif ES to "Logic" under UTILITY/[F4]CTLASN[SF4]REMOTE, set remote to "Logic" on Port 4, and press the [STORE] button. Logic should automatically find the Motif ES and identify it as an available control surface.