- manualzz.com
- sports & recreation
- camping, tourism & outdoor
- above ground pools
- above ground pool accessories
Aquacal SW112
Manuals and User Guides for Aquacal SW112. We found 5 manuals for free downloads Installation manual, Manual, Quick start Guide
Pages: 60 Aquacal SW112 Installation manual
Brand: Aquacal Category: Above ground pool accessories Size: 813 KB
Languages: English
Table of contents
- 5 WELCOME TO THE TEAM
- 6 HEAT PUMP OPTIONS
- 7 HOW A HEAT PUMP WORKS
- 8 SAFETY INFORMATION
- 10 QUICK START & STOP
- 12 HEATER CONTROLS
- 12 Control Panel Layout
- 12 Buttons, Lights, and Display
- 13 Operational & Programming Codes
- 14 Owner-Level Programming (complete)
- 18 MAINTENANCE AND GENERAL OPERATION
- 18 General Maintenance
- 18 Safety During Cleaning Operations
- 19 Maintaining Proper Water Flow
- 19 Controlling Water Chemistry
- 20 Controlling Irrigation and Storm Water Run Off
- 20 Maintaining Clearances Around Heater
- 21 Heating Tips
- 21 Heating in Cooler Weather
- 21 Pool/Spa Blankets
- 21 Pool & Spa Combination Heating
- 21 Spa Set-Back Option
- 22 Calculating Initial Heating Time
- 23 Seasonal Use & Shut Down
- 23 (Use) During the Swim Season
- 23 Freeze Protection and Winterizing Requirements
- 24 Winterizing Procedure
- 25 AquaCal Preventive Maintenance Program
- 26 TROUBLESHOOTING (No Op, No heat, Water from Unit)
- 27 Troubleshooting Flowcharts
- 30 INSTALLER-SPECIFIC INFORMATION (Installation & Set Up)
- 31 Installer-Specific Table of Contents
- 58 CONTACTING THE FACTORY
- 33 GENERAL SAFETY INFORMATION
- 33 DATA PLATE NOMENCLATURE
- 34 HEATER SPECIFICATIONS
- 34 Physical Characteristics (dimensional drawings)
- 39 INSTALLATION INSTRUCTIONS
- 39 Placement of Heater
- 39 Indoor Installations
- 39 Outdoor Installations
- 39 Required Clearances
- 40 Irrigation, Rain Runoff, and Landscape Factors
- 40 Equipment Mounting Pad Requirements
- 40 Anchoring heater to Pad
- 41 Plumbing Requirements
- 41 Overview
- 41 Approved Parts and Materials
- 41 In-Line Chlorinators (use and placement of)
- 41 Maintaining Ability to Winterize
- 41 Maximum Operating Pressure
- 41 Minimum-Maximum Water Flow Rates
- 42 In-Floor Cleaning Systems (special considerations)
- 42 Plumbing Schematics (layout drawings)
- 44 Electrical Requirements
- 44 General Requirements
- 44 Code-Specific Requirements
- 44 Connecting External Controllers
- 45 Sizing the Electrical Service
- 45 Ground Fault Protection (not recommended)
- 46 CONTROLS CONFIGURATION & ADJUSTMENTS
- 46 Level-2 (dealer-service) Programming
- 46 1. Entering Service Menu
- 47 2. Time Delay
- 47 3. Configuring for External Controllers
- 47 4. Water Sensor Calibration
- 48 5. Defrost Sensor Calibration
- 49 6. Spa Dead Band Differential (and adjustment)
- 49 7. Pool Dead Band Differential (and adjustment)
- 50 8. Changing Service Lock Code & “Back Door” Entry
- 51 Level-2 Set Up & Calibration Codes
- 51 Factory Default Settings
- 52 Troubleshooting Using Displayed Codes
- 53 Mode Jumper and Positioning
- 55 Defrost Systems (described and explained)
- 56 Water Flow Pressure Switch Adjustment
- 58 CONTACTING THE FACTORY
Other manuals and documents
advertisement