Gigabyte GA-H97-GAMING 3 (REV. 1.0)
Manuals and User Guides for Gigabyte GA-H97-GAMING 3 (REV. 1.0). We found 1 manuals for free downloads User's manual
Below you will find brief information for H97-Gaming 3 Motherboard. This motherboard supports Intel Core i7/i5/i3 processors, DDR3 memory modules, integrated graphics with D-Sub, DVI-D, HDMI, and DisplayPort outputs. It features Qualcomm Atheros Killer E2201 LAN chip, M.2 and SATA Express connectors, multiple USB 3.0/2.0 ports, and supports 2-Way AMD CrossFire technology for enhanced graphics performance.
Key Features
Supports Intel Core i7/i5/i3 processors
Dual channel DDR3 memory architecture
Qualcomm Atheros Killer E2201 LAN chip
M.2 and SATA Express connectors
Supports 2-Way AMD CrossFire technology
High Definition Audio with Sound Blaster X-Fi MB3 support
Pages: 80 Gigabyte GA-H97-GAMING 3 (REV. 1.0) User's manual
Brand: Gigabyte Category: Motherboards Size: 30 MB
Languages: English
Open manualFrequently Answers and Questions
What types of processors are supported by this motherboard?
This motherboard supports Intel® Core™ i7, Intel® Core™ i5, Intel® Core™ i3, Intel® Pentium®, and Intel® Celeron® processors in the LGA1150 package.
How much memory can I install on this motherboard?
This motherboard supports up to 32 GB of system memory using 4 x DDR3 DIMM sockets.
What graphics outputs are available on the back panel?
The back panel features D-Sub, DVI-D, HDMI, and DisplayPort outputs for integrated graphics.
What audio codec is used on this motherboard?
The motherboard uses the Realtek® ALC1150 codec with support for Sound Blaster X-Fi MB3 and High Definition Audio.
What RAID configurations are supported?
The Intel® Chipset supports RAID 0, RAID 1, RAID 5, and RAID 10.
What type of LAN chip does this motherboard utilize?
This motherboard utilizes the Qualcomm® Atheros Killer E2201 LAN chip (10/100/1000 Mbit).
Questions & Answers
A A A
Where can an HDD or SSD be installed on the GA-H97-Gaming 3 motherboard?
An HDD or SSD can be installed in the following locations:
- SATA 6Gb/s connectors: There are 6 SATA 6Gb/s connectors available for SATA devices. These connectors support RAID 0, RAID 1, RAID 5, and RAID 10 configurations.
- M.2 connector: An M.2 SSD can be installed in this connector. Note that M.2, SATA Express, and SATA3 4/5 connectors can only be used one at a time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is installed.
- SATA Express connector: This connector supports a single SATA Express device. Note that M.2, SATA Express, and SATA3 4/5 connectors can only be used one at a time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is installed.
What are the limitations when using the M.2 connector?
When using the M.2 connector, be aware that M.2, SATA Express, and SATA3 4/5 connectors cannot be used simultaneously. Specifically, the SATA3 4/5 connectors will be unavailable when an M.2 SSD is installed.
How to install an M.2 SSD?
To install an M.2 SSD, first unfasten the screw and nut from the motherboard. Screw the nut into the appropriate mounting hole. Slide the M.2 SSD into the connector at an angle, then press it down and secure it with the screw, ensuring it matches the diagram.
advertisement