326 Manuals

xpr BIOC3

Manuals and User Guides for xpr BIOC3. We found 9 manuals for free downloads User's manual, Owner's manual

Below you will find brief information for biometric reader BIOC3, desktop reader BIOE, converter CNV100, converter CNV200, converter CNV300. The BIOC3 is a Wiegand biometric reader for indoors access control applications. It offers storage up to 9500 fingerprints and programmable Wiegand Output (8 to 128 bits). Configuration of the readers and fingerprint enrollment is done through PC Software. The desktop reader BIOE is only compatible to Biometric readers with capacitive sensor, not with the ones with thermal sensor. The converters are for connecting the Biometric readers to third party controllers.

Key Features

Up to 9500 fingerprints storage
Programmable Wiegand Output (8 to 128 bits)
Configuration through PC Software
RS485 communication between readers
Connection to third party controllers through converters
Tamper switch output for alarm system
Capacitive fingerprint sensor
USB desktop reader BIOE for fingerprint enrollment
BIOMANAGER software for fingerprint management

Pages: 20 xpr BIOC3 User's manual

Brand: xpr Category: Power plug adapters Size: 2 MB

Languages: English

Open manual

Frequently Answers and Questions

How many fingerprints can the BIOC3 store?

The BIOC3 can store up to 9500 fingerprints.

How do I configure the BIOC3?

The BIOC3 is configured through PC Software. You can use the PROS CS software or BIOMANAGER software depending on your setup.

What type of fingerprint sensor does the BIOC3 use?

The BIOC3 uses a capacitive fingerprint sensor.

Can I enroll fingerprints using a desktop reader?

Yes, you can enroll fingerprints using the BIOE desktop reader. Make sure that the BIOE is compatible with your BIOC3 (capacitive sensor).

What is the purpose of the converters?

The converters are used to connect the BIOC3 to third party access controllers. They allow communication between the BIOC3 and your access control system.