xpr BIOPAD-M

Manuali e guide per l'utente per xpr BIOPAD-M. Abbiamo trovato 12 manuali per download gratuiti User's manual, Owner's manual, User manual

Below you will find brief information for Biometric Keypad Reader BIOPAD-M, USB Desktop Reader BIOE, Converter CNV100, Converter CNV200, Converter CNV300. The BIOPAD-M is a Wiegand biometric keypad for access control applications with backlit keys and programmable Wiegand output. It offers storage up to 9500 fingerprints, programmable Wiegand Output (8 to 128 bits) and selectable PIN Code length. The tamper switch output can trigger the alarm system, if an attempt is made to open or remove the unit from the wall. The BIOE is only compatible to Biometric readers with capacitive sensor, not with the ones with thermal sensor. The CNV100, CNV200, CNV300 are converters for connecting Biometric readers to third party controllers.

Caratteristiche principali

  • Fingerprint capacity up to 9500 fingerprints
  • Programmable Wiegand output
  • Selectable PIN Code length
  • Tamper switch output
  • Backlit keys
  • USB Desktop Reader BIOE
  • Converter CNV100
  • Converter CNV200
  • Converter CNV300

pagine: 24 xpr BIOPAD-M User's manual

Marca: xpr Categoria: Power plug adapters Dimensione: 9 MB

Lingue: English

Apri manuale

Altri manuali e documenti

20 pagine

Owner's manual

Lingue: English

20 pagine

Owner's manual

Lingue: English

24 pagine

User manual

Lingue: Italian

20 pagine

Owner's manual

Lingue: German

20 pagine

Owner's manual

Lingue: German

20 pagine

Owner's manual

Lingue: Italian

20 pagine

Owner's manual

Lingue: Dutch

20 pagine

Owner's manual

Lingue: Italian

20 pagine

Owner's manual

Lingue: Dutch

20 pagine

Owner's manual

Lingue: Spanish

20 pagine

Owner's manual

Lingue: Spanish

Risposte e domande frequenti

What is the maximum number of fingerprints the BIOPAD-M can store?
The BIOPAD-M can store up to 9500 fingerprints.
Can I change the length of the PIN Code used on the BIOPAD-M?
Yes, you can change the PIN Code length. You can set it from 1 to 8 digits.
What is the purpose of the tamper switch output on the BIOPAD-M?
The tamper switch output can trigger the alarm system, if an attempt is made to open or remove the unit from the wall.
How do I connect the BIOPAD-M to a third party controller?
You can connect the BIOPAD-M to a third party controller using the CNV100, CNV200 or CNV300 converters.

annuncio pubblicitario