advertisement
▼
Scroll to page 2
of 24
7 ZOJIRUSHE VE HYBRID WATER BOILER 8: WARMER OPERATING INSTRUCTIONS CV-DYC40 IMPORTANT SAFEGUARDS..............ee.....eeeeeeeeeeeeeeeeos 2 SPECIFICATIONS... eee 5 PARTS NAMES AND FUNCTIONS.................—————————. 6 BOIL MODE... eee eee 8 DISPENSE HOT WATER.......oo ieee 10 DISPOSE WATER... eee 10 AUTOMATIC SHUT-OFF FUNCTIÓN...............———————.. 11 REBOIL MODE...... coor eee eee 11 208°F KEEP WARM MODE..................emecrecnecererceens 12 175°F KEEP WARM MODE................e.eeececeneceereeness 12 VACUUM INSULATION KEEP WARM MODE........... 13 CORDLESS DISPENSING... 14 ® INSTALL BATTERIES... eee 15 HOW TO CHANGE THE INFORMATION SOUND......16 CAFE DRIP DISPENSING MODE... 16 ENERGY-SAVING TIMER FUNCTION....................... 16 CLEANING AND MAINTENANCE....................——..———... 18 9 HOW TO REPLACE THE INNER LID GASKET.....18 HOW TO PERFORM CITRIC ACID CLEANING........ 19 REPLACEMENT PARTS... 19 Q&A ON PRODUCT USE........co oie 20 TROUBLESHOOTING GUIDE................—__eee.... eee... 20 ZOJIRUSHI CORPORATION IMPORTANT SAFEGUARDS BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED WHEN USING ELECTRICAL APPLIANCES, INCLUDING THE FOLLOWING: 1. 2. 8. 9 10. 11. 12. 13. 14. 15. Read all instructions thoroughly. Avoid touching hot surfaces and do not close or clog the steam vent opening under any circumstances. The handles and knobs are provided for your safety and protection. . To safeguard against fire, electric shock and possible injury, keep the power cord, plugs and the appliance away from water or other liquids. . Close supervision is recommended when any appliance is used by or near children. . Unplug from outlet when not in use and before cleaning. Allow the appliance to cool before adding or removing parts, and before cleaning the appliance. . Do not use or operate any appliance with a damaged cord or plug. If the appliance malfunctions or has been damaged in any manner, unplug the appliance and return it to the nearest authorized service facility or delaer for examination, repair or adjustment. . The use of accessories or attachments not recommended by the appliance manufacturer may result in fire, electric shock or other injury to persons. Do not use outdoors. . Keep the power cord away from hot surfaces and do not let the cord hang over the edge of tables or counters. Do not place on or near a heated surface such as a gas or electric stove, or in a heated oven. Always use extreme caution when moving an appliance containing hot liquids. The plug to the appliance should be attached first before plugging the cord into a wall outlet. Do not use the appliance for other than intended or specified purposes. To protect against electrical hazard, unplug the cord before cleaning. Scalding may occur if the lid is removed during boiling cycles. NOTE: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug was designed to fit into a polarized outlet in only one direction. If the plug does not fit fully into the outlet, do not attempt to force it or modify it in any way. Simply reverse the plug and insert. If it still does not fit, contact a qualified electrician. SAVE THESE INSTRUCTIONS THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY. A. B. C. A short detachable power-supply cord has been provided for your safety. To reduce risks from entanglement or tripping, a longer cord is not recommended. Extension cords should only be used if care is exercised. If using an extension cord: (1) the marked electrical rating of the detachable power-supply cord or extension cord should be at least as high as the electrical rating of the appliance; (2) if the appliance is of the grounded type, the extension cord should have a ground-type 3-pronged plug; and (3) the longer cord should not drape over the countertop or tabletop where it can be pulled on by children or tripped over. Before use These WARNINGS and CAUTIONS are intended to protect you and others from personal injury and household damage. To ensure safe operation, please follow carefully. Do not modify the product. Only a repair technician may disassemble or repair this unit. e Attempting to do so may cause fire, electric shock or injury. Make any repair inquiries to Zojirushi Customer Service. Do not immerse the product in water or splash it with water, and do not put it on a wet surface such as a sink. Doing so may cause short circuit or electric shock. Do not plug or unplug the Power Cord if your hands are wet. Doing so may cause electric shock or injury. Do not touch the Steam Vent or bring your hands or face near the Steam Vent. e Doing so may cause burns or scalding. Take special precautions with children and infants. Do not cover the Steam Vent with anything such as a dishcloth. Hot water may spill out, resulting in scalds. It may also cause deformation or discoloration of the Upper Lid or breakdown of the product. Do not allow children to use the product unsupervised. Keep it out of the reach of infants. * Children are at risk of burns, electric shock or injury. Do not fill over the Maximum Water Level Line. e Overfilling may cause hot water to spill out, resulting in scalds. Always remove the Upper Lid before disposing hot water. * The Upper Lid may fall off and cause hot water to splash, resulting in scalds. Do not tilt or shake the product or carry in your arms. Do not move it or drain hot water by holding the Upper Lid. * Doing so may result in scalding by hot water spilling out from the Spout or Steam Vent, even if the Automatic Dispense Lock is on. Always use the handle when carrying. Do not tilt the product or tip it over. e Hot water may spill from the Spout or Steam Vent, even if the Automatic Dispense Lock is on. Do not slam the Upper Lid when closing. e Hot water may dispense or spill out, resulting in scalds. Do not use the product if the Power Plug or Power Cord is damaged or if the Power Plug is loosely inserted into the electrical outlet. * Doing so may cause electric shock, short circuit or fire. Close the Upper Lid securely. * Hot water may spill out when the product is overturned, resulting in scalds. Do not remove the Upper Lid while boiling. Do not damage the Power Cord. Do not bend, pull, twist, fold, or attempt to modify the Power Cord. Do not place it on or near high temperature surfaces or appliances, under heavy items or between objects. * A damaged Power Cord can cause fire or electric shock. Do not use the product as a cooler or place ice inside of it. e Doing so may cause condensation, resulting in electric shock or breakdown of the product. Do not allow the prongs of the Appliance Plug to become soiled with dust or come into contact with any metal objects. * Doing so may cause electric shock, short circuit or fire. Do not allow infants or children to put the Appliance Plug in their mouth. * Doing so may cause electric shock or injury. Take special precautions with children and infants. Insert the Power Plug completely and securely into the electrical outlet. e À loosely inserted Power Plug may cause electric shock, short circuit, smoke or fire. Use only an electrical outlet rated at 15 amperes minimum, and do not plug other devices into the same outlet. * Plugging other devices into the same outlet may cause the electrical outlet to overheat, resulting in fire. If the blades or surface of the Power Plug become soiled, wipe them clean. e À dirty Power Plug may cause fire. Do not use a power source other than 120V AC. e Use of any other power supply voltage may cause fire or electric shock. Do not boil anything other than water. e Attempting to boil, cook, or heat up the following items may cause bubbling or boiling over, which may cause scalding. Doing so may also cause clogging of the water route, corrosion of the Inner Container, or peeling of the Nonstick Coating. * Milk, sake, soup, charcoal, tea bags or tea leaves. * Instant food. * Food and sauce pouches or foods in plastic bags. This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product. ®The illustrations used in this Operating Instructions may vary from the actual product you have purchased. IMPORTANT SAFEGUARDS (cont) * The Body is deformed or unusually hot. check-ups and/or repairs. Stop using immediately if you notice any of the following symptoms indicating a malfunction or breakdown. * Continued use of the product may cause smoke, fire, electric shocks or injury. The Power Plug or Power Cord has become very hot. The Power Cord is damaged or the electricity turns on and off when touched. - Smoke is arising from the product or there is a burning smell. * Some part of the product is cracked, loose or unstable. * The product emits steam for at least 10 minutes continuously and does not turn to Keep Warm mode. If any of the above occurs, unplug the product immediately and return to the store where you purchased it for CAUTIONS Always use caution when opening the Upper Lid and avoid skin contact with steam. e Loose water or steam may escape upon opening the Upper Lid and cause scalds. Do not touch hot surfaces during or for a short period of time after use. * Touching hot surfaces may cause burns. Be especially careful with metal parts such as the Inner Lid and the Inner Container. Please allow the product to cool down before cleaning. e Touching hot surfaces may cause burns. Do not use the product near walls or furniture. * Steam or heat may damage, discolor or deform walls or furniture. Do not swivel or move the product while dispensing water. * Hot water may splash out, resulting in scalds. Do not place or use the product on unstable * Doing so may cause fire. Do not attempt to dispense hot water while it is boiling. * Hot water can spurt out, resulting in scalds. surfaces or on surfaces that are vulnerable to heat. Do not use other Power Cords than the one provided. Do not use the Power Cord for other appliances. Do not use the Power Cord for overseas models. * Doing so may cause malfunction or fire. Unplug the Power Plug from the outlet when the product is not in use. e Leaving the Power Plug in an outlet may cause the insulation to become damaged, resulting in electric shock, short circuit or fire, or result in injuries or scalds. Do not touch the Lid Lock when carrying the product. * Doing so may cause the Upper Lid to open, resulting in injuries or scalds. Always unplug the product by holding the Power Plug, not by pulling the Power Cord. o Pulling the Power Cord to unplug the product may cause electric shock, short circuit or fire. Replace the Inner Lid Gasket if it becomes discolored white. * Hot water may spill out when the product is tilted or tipped over accidentally, and may cause scalding. If the Power Cord is damaged, it must be replaced by an appropriate cord or assembly made available by the manufacturer or its service agent. IMPORTANT Do not operate the product when it is empty. * Doing so may burn or damage the product. Avoid rough handling, dropping or bumping the product. * Doing so may cause damage or cease operation of the product. Avoid letting steam make contact with cabinets and walls when using near or under a kitchen shelf. ® Doing so may cause discoloration or deformation. Do not use the product near a heat source or on top of induction heating cookers. * Doing so may cause fire, breakdown or damage of the product. Do not allow hot water to come into contact with the Control Panel or the Water Level Gauge. * Doing so may cause breakdown of the product. Allow the product to dry completely when storing the product in an area where it may freeze for a long period of time. e If water left inside freeze, it may cause breakdown or malfunction. Do not drag the product over any surface while attempting to move. e Doing so may cause damage to surfaces such as countertops. Avoid using the product near a radio, TV, computer, etc. e The product may cause interference with certain electronics. Do not use the product where its steam may come into contact with other electrical appliances. * The steam may cause fire, malfunction, discoloration or deformation to other electrical appliances. SPECIFICATIONS Capacity 135 oz. (4.0 liters) Rating AC 120V 60Hz Electric Consumption 840W Average Power | 208°F (98°C) Approx. 20W during Ken 195°F (90°C) Approx. 17W Warm 175°F (80°C) Approx. 14W Length of the Power Cord 2' 11" (0.9m) External (approx. inches) 8-% (W) x 11 (D) x 13-'% (H) Dimensions (approx. cm) 22 (W) x 28 (D) x 35 (H) \ Weight (including the Power Cord) Approx. 7 Ibs. (3.2 kg) J e The average Keep Warm electric power consumption is for one hour, provided that the Inner Container is full and the room temperature is approximately 73°F (23°C). e The height refers to the product when the handle is down. @®In high altitudes or severely cold areas, the product may not perform as specified. Avoid using the product in such areas or in other extreme conditions. PARTS NAMES AND FUNCTIONS The light sound you Lid Lock may hear when opening and closing the Upper Lid is normal. (see pg.21) Steam Vent eExercise care during the boiling process as steam emitting from the Steam Vent is very hot. Inner Lid Gasket A eHot water may leak from the i gap between the Upper Lid Inner Lid and the Body when ited i the Inner Lid Gasket becomes old Water Removal Area and turns white. This may eDrain water here. result in scalds. Maximum Water Level Line a ate Hinge Control Panel Inner Container Spout (Nonstick Coating) ®Hot water dispenses from here. Handle Water Level Gauge REFILL Line > ©Fil| water above the line. N be. B С Receptacle attery ase ®Appliance Plug inserts here. Install two AA dry-cell batteries for cordless dispensing. (see pg.15) eBatteries are not included. Filter i Swivel Base eFor care and use instructions, see pg.18 eDo not let the Power Cord wrap around the Main Body when turning. Twist Tie ePlease remove the twist tie holding the Power Cord before use. Power Cord 4 eDo not use the Power Cord bundied up. Doing so may cause S the Power Cord to become excessively hot, resulting in malfunction. Power Plug Appliance Plug CONTROL PANEL CAFE DRIP light ® Press buttons down firmly. UNLOCK light DISPENSE button Press to dispense hot water. (see pg.10) The raised dot ( e) in the center of the DISPENSE button is provided for those with visual impairment. UNLOCK button This button must be pressed to dispense hot water. (see pg.10) Press this button again for Café Drip Dispensing mode. (see pg.16) BOIL light —— ВУ — E a, DISPENSE 59 UNLOCK REBOIL button Q <ORDLESS see pg) TN TEMP) 65 (0806 (ey ENERGY-SAVING see pg. - Also used when SET/ 11754 = o TIMER button performing Citric Acid Cleaning (to initiate — Use when setting the cleaning, press this button — A Energy-Saving Timer function. for more than 3 seconds). (see pg.16) (see pg.19) > . SAT Display TEMP SET button LCD display shows the water temperature Sets the Keep Warm temperature. and Timer settings. (see pg.12) KEEP WARM light How to Open/Close the Upper Lid To Open @ Press the indented area of the Lid Lock with thumb. @ Pull the Lid Lock up with fingers to open the Upper Lid. To Close Depress the Upper Lid until it clicks shut. Indented Area of the Lid Lock Lid Lock NOTE: Illustration is for reference only. Actual display will not show all functions simultaneously during use. How to Detach/Attach the Upper Lid ToDetach @ Open the Upper Lid to about a 45-degree angle. @ Press the Upper Lid Detach button. © Full the Upper Lid forward and up at an angle. To Attach Push the Upper Lid back into place at the same angle. 7 и” About 45 *. degrees Upper Lid Detach button BOIL MODE 1 Open the Upper Lid and fill the Inner Container with water using a pitcher or other container. To monitor the amount of Maximum Water water you are filling, look at Level Line = the thickness of the stripes on —— : the Water Level Gauge. ( AMAX ) 7 Container directly When the Inner or place the product Container is empty. on a wet surface | @Do not fill the Inner Water Present Water such as a sink. — Level — = Level (Exposing the Gauge heating element mm) directly to water may cause malfunction.) The stripes on the Water Level Gauge appear thicker when water is added. It automatically starts the boiling process while performing the Steam-Reduce function. Close the Upper Lid securely. The BOIL light turns on and the Display T f shows the water temperature. operation while Below 170°F: Display shows the water boiling and to prevent temperature in 10°F increments. scalds if the product Above 175°F: Display shows [175] - [180] Is overturned. > [185] > [190] > [195] — [200] > [205] > [212]. ==> VACUUM INSULATION STEAM-REDUCE FUNCTION (activates when boiling): This feature automatically lowers the eDo not allow the power just before boiling to reduce the ronas of the amount of steam emitting from the Be sure to insert the Appliance Plug to Steam Vent. (Water temperature will be Power Cord securely. get soiled with dust | | about 212°F when boiling.) shock, short circuit, smoke or with metal objects during winter when the room temperature fire. such as pins. is colder or the amount of water is lower. shock, he may cause electric | or come into contact @Steam may become more noticeable E Temperature Conversion Guide The first time mo" | Fahrenheit (°F) | Celsius (°C) 212 100 208 98 195 90 175 80 73 23 @Avoid splashing water on the Body or Control Panel. (May cause malfunction.) @Do not fill over the Maximum Water Level Line. (Hot water may overflow from the Steam Vent.) @Do not fill the Inner Container with hot water. (The Automatic Shut-Off function may be activated.) (see pg.11) @Do not fill the Inner Container with any liquid other than water. @Do not use water additives such as charcoal for water purification or mineral additives. (Small particles may get clogged inside of the product.) When boiling has completed, a melody sounds and it automatically switches to 195°F Keep Warm mode. you use the product you may notice the smell of plastic. This is normal and will gradually fade @At your initial use or when using the product after a long period of storage: Attach the Filter, fill the Inner Container with water to the MAX line and boil as directed. Once it reaches a boil, dispense about 34 oz. (1 liter) of water and dispose the remaining water. Fill with fresh water. @When using mineral or alkaline iodized water: When mineral or alkaline iodized water is used, a floating residue may develop or a milky white substance may form on the surface of the Inner Container. This is due to the ingredients in the water and is harmless to your health. Frequent cleaning is recommended. How to change the Information Sound from a melody to a beep. (see pg.16) X Turns S— Turns off | (sou) y Time required to boil water: Approx. 35 minutes Ж1 Includes approx. 4 minutes to Dechlorinate. (At a room temperature of 73°F with the Inner Container filled to the Maximum Water Level Line with water temperature at 73°F.) How to set the Keep Warm Mode: 208°F Keep Warm Mode. (see pg.12) 175°F Keep Warm Mode. (see pg.12) Vacuum Insulation (Non-Electric) Keep Warm Mode. (see pg.13) qd @Add water when the water level is low during the Keep Warm mode. (The product automatically begins heating the water.) If the water level is still not high enough, it will not automatically switch to Boil. In this case, press the REBOIL button to manually start the process. (see pg.11) When the water temperature drops to about 195°F, "195" appears on the LCD display. VACUUM INSULATION Length of time until the water temperature reaches about 195°F: Approx. 1 hour 50 minutes ePlease follow the instructions below to reduce the risk of scalding: * Do not cover the Steam Vent with a cloth. 195°F KEEP WARM MODE: You can reduce electricity consumption by : about 51% “during 195°F Keep Warm mode : compared with 208°F Keep Warm mode. : 2 The energy savings has been calculated under the conditions of using the product 24 hours a day, 365 * Be careful of steam coming out from the Steam Vent. * Do not open the Upper Lid while the days a year, refilling water twice a BOIL light is on. day, reboiling twice a day, then . ; Won deducting the electricity for boiling & р ont dispense hot water while it is reboiling twice per day. оно. DISPENSE HOT WATER OMC (oo TEC Turns off ©) (нос DO SLOW 10 seconds after dispensing, the UNLOCK light turns off and the Automatic Dispense Lock is activated. The UNLOCK light turns on and hot water can be Do not swivel the product dispensed. while dispensing water. Automatic Dispense Lock eWhen the UNLOCK light is off @Initially upon boiling or if it has been A safety function to prevent hot water a while after dispensing, the water may not be very hot. Please discard from dispensing if the DISPENSE water cannot be dispensed. spensi button is accidentally pressed. <a> the first cup (of the hot water). @Even if no water is dispensed, the @Do not attempt to dispense hot Automatic Dispense Lock will be @Do not unlock and press the water while boiling. activated after about 10 seconds. DISPENSE button if the Inner ®Water may not dispense smoothly eBe careful as the Body heats up during the Boil and Keep Warm modes. DISPOSE WATER product after dispensing. Hot water may drip from the | Spout, causing scalds. 7 Unplug the Power Cord Hold the product with both hands and dispose water where indicated and detach the Upper Lid. "EMPTY FROM HERE" on the wall of the Inner Container. Hold the Handle securely. When disposing hot water: | ®Take precaution with the hot water and steam. You may scald yourself. ®Take precaution as hot water may drip from the q Spout, causing scalds. | Water Removal Area EMPTY FROM HERE 7 Automatic Shut-Off function VACUUM INSULATION Beeps will sound, the lights will turn on and "HH" will appear on the Display. Short beep X 10 times ®Be careful not to repeat the boiling process without filling the Inner Container with water, as the Nonstick Coating may discolor \_ and peel. dus @Do not plug or unplug the Power Plug or Appliance Plug with wet hands. (Doing so may cause short circuit or electric shock.) @Do not dispose hot water with the Upper Lid in place. (The Upper Lid may come off, spilling hot water and causing scalds.) @Do not allow water to splash on the Control Panel, Hinge, Handle, Receptacle or Battery Case. (Could cause scalding or breakdown.) ePlease do not lose the Filter while disposing water. ePlease make sure the Battery Case does not fall out. eDispose the water at least once a day. (Leaving water in the Inner Container can accumulate scale.) The Automatic Shut-Off function activates to shut down power to the heater in order to prevent damage from overheating. The Display will show "HH" to alert you that the Automatic Shut-Off has been activated. The following conditions may cause activation: eWhen plugged in without filling the Inner Container with water. eWhen the water level is lower than the REFILL Line and boiling has been attempted. eWhen the Inner Container is empty or the Upper Lid is left open for adding water. eWhen pouring in hot water immediately after plugging in the unit. Unplug the product. Allow the Inner CUE) Container to cool. Fill the Inner Container with water and plug back in. J This function is used when reboiling water in the Keep Warm mode. ~ Reboil mode ~ Press the button. The BOIL light turns on when the boiling process begins. Time required to REBOIL Beep finish reboiling (At a room temperature of 73°F (23°C) O with the Inner Container filled to the Maximum Water Level Line.) 208°F Keep Warm mode Approx. 3~4 minutes + 195°F Keep Warm | ; mode When the Reboil process is completed, the product switches to Keep Warm Approx. 6~7 minutes mode. e The Steam-Reduce function may not activate when reboiling. D @Do not attempt to dispense hot water while reboiling. eMake sure the water level EWater may not dispense is above the REFILL Line smoothly for a short period of before pressing the \_ time after reboiling. ; 11 200" KEEP WARM MODE 175°F KEEP WARM MODE VACUUM INSULATION KEEP WARM MODE Each press of the button changes the position of Press the button to change the settings. the " " on the display. 195 4 208 id 195 md 175 jmd VACUUM INSULATION (Default) 1 | Detaching the Power Cord and reinserting it may return the product to the 195°F Keep Warm mode. For making coffee, tea and instant noodles 208°F Keep Warm Mode For making Japanese (green) tea 175°F Keep Warm Mode 208°F is ideal for making coffee, tea or instant noodles. 175°F is ideal for making Japanese (green) tea. Select the "208" on the Display. 6 A VACUUM INSULATION When the boiling process has completed, a melody sounds, the BOIL light turns off and the KEEP WARM light turns on. VACUUM INSULATION When the water temperature reaches 208°F, "208" appears on the Display. eDepending on the altitude where the product is used, the Keep Warm mode may be set at 205°F-207°F, in order to prevent continuous boiling. 12 Select the "175" on the Display. (= “gm Turns off $ VACUUM INSULATION When the boiling process has completed, a melody sounds, the BOIL light turns off, and the KEEP WARM light begins to blink. | If initiated during Keep Warm mode, the light Will blink 2 seconds after the selection. When the water temperature reaches about 175°F, "175" WIFE appears on the Display, and the KEEP WARM 0 9 light stops blinking and remains on. M Length of time for the water temperature to reach 175°F after boiling: Approx. 4 hours and 20 minutes | (At a room temperature of 73°F with the Inner Container filled to the Maximum Water Level Line.) @ The length of time for the water temperature to reach 175°F will vary depending on the amount of water and room temperature. elf you wish to shorten the time, add less water to the Inner Container. elf water is added as the temperature is lowering during this mode, the product may not automatically reboil. NN. J 2000000 DA SLOW CORDLESS VACUUM INSULATION * You will hear two beeps when 195°F Keep Warm mode is selected. e Y ou can change the temperature setting during Keep Warm mode. on the water temperature and С may start reboiling depending the selected setting. Vacuum Insulation Keep Warm Mode This mode saves electricity by shutting off the power to the heater after the boiling process is completed and keeps it warm by thermal insulation. Select "VACUUM INSULATION" on the = $ Turns Turns off rou) mo! off 208 ao NC nw When the boiling process has completed, a melody sounds, and both the BOIL light and KEEP WARM light turn off. BM Water temperature during VACUUM INSULATION Keep Warm Mode: After boiling completes 2 hours later | 4 hours later | 6 hours later Approx. 199°F | Approx. 188°F | Approx. 177°F Temperatures are measured in the center of the Inner Container and are based on a room temperature of 73°F, with the maximum amount of water. @As the water temperature drops, the display temperature may be lower than actual when the Vacuum Insulation Keep Warm mode is selected. @ The lower the amount of water, the faster the temperature will drop. @During the Vacuum Insulation Keep Warm mode, the product will not automatically start reboiling. To resume boiling, manually press the REBOIL button. elf this mode is selected while boiling, it will change to Vacuum Insulation Keep Warm once boiling has completed. ®When the Energy-Saving Timer function is selected, the product completes boiling at the set time, then returns to the Vacuum Insulation Keep Warm mode. f A If the Power Cord is detached: ®Reinsert the Power Cord if it is accidentally detached. elf the cord is detached for more than a few minutes and reinserted, the product returns to the 195*F Keep Warm mode and may start reboiling automatically. N y E Temperature Conversion Guide Fahrenheit (°F) | Celsius (°C) 212 100 208 98 207 97 205 96 199 93 195 90 188 87 177 81 175 80 73 23 13 CORDLESS DISPENSING - A A convenient function that allows dispensing of Cordless Dispensing hot water without plugging in the Power Plug. 1 Check that the Power Cord is connected. @Features other than dispensing will not be available. 2 Check that the batteries are @ The water temperature will drop as time advances (the . water temperature will drop approximately 7°F (4°C) after installed. an hour, provided that the room temperature is 73°F (23°C) with the Inner Container filled to the Maximum Water Level , Line). The lower the amount of water in the Inner Container, 3 Disconnect the Power Plug. | the quicker the water wil cool. Hot water may not ®The possible dispensing rate of hot water will be slower dispense unless | a (M) than when dispensing with the Power Plug connected. the batteries are x Furthermore, hot water may not dispense smoothly when properly installed dispensing hot water for extended periods of time. In this before the Power e case, stop dispensing and wait a few seconds, then resume Plug is disconnected. 6 vr dispensing. e The temperature shown on the LCD Display may not , change as quickly as the change in water temperature. 4 Dispense hot water. e The LCD Display will turn off approximately 5 hours after <> the product is unplugged, and cordless dispensing will no longer be available. (If batteries are not installed, the Display will stay on for approximately 1 hour after the product is unplugged, but you will not be able to dispense.) E not tilt or shake the product after dispensing. Hot water may drip from the Spout, causing scalds. REMAINING BATTERY LEVEL DISPLAY [ndicates the remaining battery level for cordless dispensing. Approximate New я” ‚= ®New batteries may not work as intended if Batterv Life for Cordless (LI L left unused in the Battery Case for an artery г (Jd al- extended period of time. Dispensing: Approx. 300 ææ_ eThe remaining battery level display will not liters (80 gallons) UT show when the product is plugged in. - e This display is for guidance only. e The remaining battery level display may not be accurate immediately after the The batteries are usable. product is unplugged or the batteries have just been replaced. (The remaining battery level will be reset once cordless The batteries will need to be dispensing is operated.) + replaced soon. eDuring Café Drip Dispensing mode, hot A ВЕ water may not dispense even if the (Please replace batteries if this remaining battery level display indicates display is showing during cordless that the batteries are usable. In this case, | dispensing.) press the UNLOCK button to return to the normal dispensing mode to dispense. Batteries are not installed, or need to be replaced. a Install Batteries | | Install two AA Alkaline batteries before operating Cordless Dispensing. 1 Remove the Battery Case. Press the button ((#3)) on the Battery Case. ds ®Do not press the button on the Battery Case forcefully. (The Battery Case may pop out, causing malfunction.) Battery Case Press the button slowly until the Battery Case springs out. 2 Install two AA batteries. UP eBe sure to set the polarity (+ —) of the batteries correctly. Handling Batteries | Attach the Battery Case correctly. Misuse of dry-cell batteries may cause liquid leakage, explosion or heat generation, causing injury or product failures. Be sure to follow the instructions below for proper handling. ®Remove batteries from Battery Case if storing for a long period of time without use. Batteries left in Battery Case may leak. ®Do not short-circuit, charge, disassemble or heat dry-cell batteries. Do not throw them in fire. ®Do not use rechargeable batteries such as nickel-cadmium batteries as they are not completely compatible with dry-cell batteries in size, shape or performance. ®Promptly remove dead dry-cell batteries from the Battery Case and replace with new ones. Be sure to change both batteries together. eDo not mix new and used batteries, or different types of batteries. 15 HOW TO CHANGE THE INFORMATION SOUND / CAFE DRIP DISPENSING MODE / ENERGY-SAVING TIMER FUNCTION № How to Change the Information Sound UT ELE lod (Default) 1 Press the button for (Melody) more than 3 seconds © preso Tos ore during the boiling process ye or Keep Warm mode. eEach button press changes the Information mans peones © Sound. р 9 Lea than 3 seconds Cafe Drip Dispensing Mode = Press the button Press the \ visPEnsi twice. dispense hot water. When the , Long beep orange-colored CAFÉ When the light turns off, the DRIP light turns on, O | Café Drip Dispensing u =) Automatic mode is activated. SLOW 0 Dispense Lock will be activated. Energy-Saving Timer Function Press the button until the A melody sounds and the Energy- desired length of time is displayed. Saving Timer function is activated. _ een ón ~~ IN is selected. 1534 Bro (MER) Eo” € he Boiling function will complete ) O p at the set time. A melody sounds, the BOIL light turns off Timer settings: (H for hours) and the KEEP WARM light turns on. ex > 74 > 8H > 9H > 104 > Cancel Boiling may stop earlier than set, depending on room temperature, water temperature and amount of water. 16 e Information Sound: The product informs you with a melody or beeps that it has finished boiling or the timer has been set. 2 Once your desired sound When and what types of , (melody or beep) is heard, nrormation Sounds are neara. Q . . T the setting is completed. n ype en e The information sound cannot be changed | when the product is used cordless. Timer is set | Beautiful Dreamer X X elf the Silent setting is selected, a beep will: H----—-—————+----------4---------_--------{ indicate the setting has completed. Boiling st eThe information Sound will return to (@elingsiops | Minuet | Slongbeeps| X Melody if the product is unplugged. This mode decreases the amount of water dispensed to 60% of the normal setting, making it suitable for brewing café drip coffee. ePressing the UNLOCK button again during Café Drip Dispensing mode returns it to the D normal dispensing mode. ®You can use the Café Drip Dispensing mode ®Be careful not to burn yourself. for about 60 seconds while the CAFE DRIP elf using a cone filter placed directly on light is on. a cup, be careful not to let it fall inside elf the water level is low, it may take longer for the cup while brewing. pa Segin dispensing after pressing the ®When using a manual drip coffee cone, . в dispense a cup of hot water before elf the water level is low or boiling has just brewing. (The first cup may not be hot completed, water may not dispense smoothly. enough.) ®Cordless dispensing may not work if the remaining battery level is too low. This function helps save energy by shutting off electricity to the product when not in use, and completes boiling in the selected amount of time. The heater is turned off until ready to begin boiling. ds You could save electricity by about 30% . when 208°F (98°C) Keep Warm mode is elf the Power Cord IS detached, the selected, and 15% when 195°F (90°C) Energy-Saving Timer function will be Keep Warm mode is selected. cancelled and must be reset. The energy savings has been calculated under the e To cancel the Timer, press the TIMER conditions of using tre product 24 hours a day, 309 days a button several times or press the year, refilling and boiling water twice a day, reboiling once a day, and using the Energy-Saving Timer set at 8H. REBOIL button once. 17 18 Always unplug the Power Cord, CLEANING AN Г) MAI NTENANCE dispose all water, and allow to cool completely before cleaning. eDo not attempt to dry the product by turning it upside down when the bottom is wet. COD (Water may get inside the body and cause it to break or rust.) eDo not use a thinner, benzene, abrasive cleansers or brushes (nylon/metal), bleach or anything that may damage the surface of the product. (May cause damage to the Nonstick Coating.) eDo not use a dishwasher or dish dryer for cleaning or drying. (May cause the plastic parts to deform.) eBetore storing the product for a longer period of time, dry it completely and pack in a plastic bag to prevent odors from being absorbed. Wipe with a soft wet sponge. в Perform the Citric Acid Cleaning ) (see pg.19) periodically. Especially when... ®Red rust-like spotting is visible on the Inner Container. eMilky white or gray discoloration and/or filmy objects are found in the water. eBolling is louder than usual. eHot water has an odor. (The condition of the Inner Container will vary \ depending on the water quality and frequency of use.) Remove the Filter from the Inner \ Container and wash with a soft brush. Pull the Filter up to release, and press ‘ down firmly to attach. MO, If you find it difficult to clean the Filter, replace 1 (un) it with a new one. A "TEl Wipe clean with a Body/Upper Lid damp well-wung sth. eDo not wash any part of the Body or Control Panel with water. (May cause malfunction or rust.) CS RRS o WO ONever use the product without installing the Filter. (The Filter prevents foreign objects from entering the Electric Pump and obstructing the flow of hot water.) (see pg.19) = Power Cord Wipe clean with a dry cloth. ON AO A TR = ОРС рРО ОНТ Ж Wipe new Inner Lid Gaskets with a wet soft sponge before attaching to the Inner Lid. To remove the Inner Lid Gasket When the Inner Lid Please purchase (D Loosen the 3 screws. Gasket takesona | J and replace with a ® Remove the Inner Lid Gasket white discoloration. new one. ( N D @Do not remove the screws from the Inner Lid Gasket Upper Lid to avoid losing them. Screws (x3) To attach the Inner Lid Gasket (D Fit the Gasket of the Inner Lid securely to the outer circumference as shown in the figure. @ Tighten the screws securely. QP elf you remove the Inner Lid, be sure to reinstall it correctly. Hot water may leak from the gap between the Upper Lid and the Body when tilted if the Inner Lid Gasket becomes old and turns white. This may result in scalds. If hot water spews from the gap or there is steam even after replacing the Inner Lid Gasket, other parts may be in need of repair. Please contact Zojirushi Customer Service. J Perform every 1-3 month(s) of usage HOW TO PERFORM CITRIC ACID CLEANING Do not drink the water used for citric acid cleaning. In order to prevent gas bubbles and bubbling-over, the Citric Acid Cleaner for Electric Water Boilers (CD-K03E-JU) is recommended for cleaning. To purchase this cleaner, please visit an authorized Zojirushi dealer or www.zojirushi.com. 4 . — N Preparation: > elf the Filter is dirty, remove . . NOA it from the Inner Container, Check that the Filter is attached y ТТ QUID Wash wih a soft brush and to the Inner Container. <= reinstall. ] Put 1 package of the Citric Acid Cleaner eDo not fill over the CD-K03E-JU in a cup and add warm water to CD Maximum Water Level | dissolve. Pour it into the Inner Container and Line. (hol water may o fill with water to the Maximum Water Level Line. Y : > Close the Upper Lid, insert the Power Plug and press the button for more than 3 seconds. | Beeps when the cleaning process begins. | | Beeps when the cleaning process is completed. e Beep © Long beep x 5 Cleaning time: REBOIL REBOIL times x ww o Approx. 1.5 hours. 7 208 r “1 \ Sf XCleaning times may va ) LJ К on the ancl} of water, water temperature E temperature. Both lights will The square Both lights will stop LCD display will blink. shown in the blinking and stay on, show a square as display rotates. illustrated. Unplug the Power Plug, detach the al accesar for harto НОО, may О pper Lid and dispose water where residues or if water does not indicated "EMPTY FROM HERE. dispense smoothly. (Please take precautions not to splash water on the Hinge.) ®If mineral or alkaline iodized water is a on used, calcium tends to build up on the To remove the smell of citric acid, fill the surface of the Inner Container. If scale Inner Container with water. Boil and accumulates on the Inner Container or the dispense about a cup of hot water, allow Filter, boiling may become louder than : ini usual and water may not dispense to cool, then dispose the remaining water. smoothly. Frequent cleaning is When disposing hot water: ) recommended when using mineral or alkaline iodized water. @ lake precaution with the hot water and — - - steam. You may scald yourself. To cancel the Citric Acid Cleaning at any eTake precaution as hot water may drip time, unplug the Power Plug for more from the Spout, causing scalds. than 5 seconds. \ J eReplacement parts may be available for an Parts Names Parts Number additional charge. Please replace damaged id Gask parts only with new parts. Inner Lid Gasket 627303-00 ®When replacing parts, please record the model | Filter 627402-00 number and part name beforehand. Then Citric Acid Cleaner for contact either the store where you purchased Electric Water Boilers CD-KO3E-JU the product or Zojirushi Customer Service. (1 oz. / 30 g X 4 packets) Zojirushi Customer Service 1-800-733-6270 www.Zojirushi.com 19 Q&A ON PRODUCT USE Is it okay to use the product for heating liquids other than water? Do not fill the product with any liquid other than water. It may » pg.3 cause malfunction, or may overflow and cause scalding. " Does the water need to be To prevent scale from building up, please change the water at » pg.10 changed every day? " least once a day. Yes. However, when mineral water is used, a floating residue may develop or milky white substance may form on the surface of the > pg.9 Inner Container. This is due to the ingredients in the water and is - harmless to your health. Is it okay to use mineral water? ; : а Yes. However, calcium tends to build up on the surface of the Is | okay to use alkalized ionic Inner Container with this type of water, so frequent cleaning is > pg.19 water: recommended. У У VV | accidentally drank water while | | И performing the citric acid cleaning. > a a Ally Pati shown on the package of the citric Is this harmful to my health? : ; It is safe to use the product unattended as it has an Automatic Is it Okay to go out while the > Shut-Off function (power to the heater will be automatically turned > pg.11 product is switched on’ off), which will be activated once it is empty of water. TROUBLESHOOTING GUIDE ии — Remedy —) ( ( Boil water, unlock and dispense about 34 oz. (1 liter) of hot water. |_ Discard the remaining. (see pg.9) —_, OA mild plastic odor may be noticeable with a new product. This odor will gradually fade away. ®You may smell chlorine (used for sterilization of tap water) after boiling. Water pours out by itself from the Spout or Steam Vent. The product has not been used for a long time. > Water does not boil. iii FM connected to an ) | Connect the Power Plug. N В 7 > © Scale or other residue has › "© accumulated on the Inner Container. ал Ô Perform citric acid cleaning. = Hot water has a You have not performed citric acid > (see pg.19) disagreeable odor. cleaning regularly. q J opus N e Check that the Inner Container is not filled Pour out the excess water until it is over the Maximum Water Level Line. below the Maximum Water Level Line. @Initially upon boiling or if it has been a while after dispensing, the water may Water is not hot. not be very hot. Please discard the first cup (of the hot water). ( Open the Upper Lid to release air )\ = Hot water does not pour properly a bubbles, then close. (Be careful of © few minutes after boiling. › _ steam when opening the Upper Lid.) ( . CS Scale or other residue has accumulated Clean the Inner Container and < on the Inner Container and Filter. « Filter. (see pg.18) ) = 4 в © The Automatic Dispense Lock is › Press the button, then press the Г engaged. iseensE) button. (see pg.10) ) © Water does not < dispense or does Power Plug is not connected to an electrical (> not pour properly. outlet. (When no batteries are used.) Connect the Power Plug. J CC X QO The batteries may be dead, not O, installed correctly, or not installed at all. « Install new batteries. (see pg.15) ) _ : | ( N o! The product is unplugged with no > Install batteries, unplug, and then 0 batteries installed. operate cordless dispensing. | 4 N Calcium may build up in the water route and Perform citric acid cleaning. prevent water from dispensing smoothly. « (see pg.19) J C Remedy A, . . . ( A filmy, floating residue Residue is due to the mineral Perform citric acid cleaning is noticeable. (Could content in water, not from corrosion (see pg.19) the Nonstick Coating be oa e container or peeling of peeling off?) the Nonstick Coating. Scale Milky white and rough- | | Over time and use, calcium surfaced objects have built ERAN umulation of cae and and other minerals — up on the surface of the Inner Container can cause boiling to contained in water build up Inner Container. (Boiling is become louder. on the surface of the Inner louder than usual.) Container and the Filter. It is Red rust-like spotting called "scale" and is Caused by iron in the water, not harmless to vour health. = appears on the Inner deterioration of the Inner Container. y Container surface. N J i ( > с. Water cools easily 1 Add water (below the Maximum during Vacuum The amount of water kept warm is Water Level Line) and press the Insulation Keep Warm too low. mode. q button. )) > (The water temperature will drop as Are you using the product cordless? > time advances while the product is | used cordless. (see pg.14) ‘| Is the Vacuum Insulation Keep Warm ( В Water is not hot. mode selected? If yes, then power to the heater has been turned off, causing > Press the (so) button. the water temperature to gradually drop. (see pg.13 8 16) Is the Timer set? > « J <> The Inner Container is low 58 A beep sounds, on water or hot water was ‘про the Power Plug and ll lights turn on and added to the Inner wait until tne inner D "HH" appears on 105 MU Container, causing the > Container cools down. = the Display. 175 Automatic Shut-Off function ~~ Add water and plug in the Er VACUUM INSULATION to engage. (see pg.11) Power Cord. = , , = uz = > liahts blink at REBOIL) * o To cancel the citric acid dh Ignis E a d | The Inner Container is cleaning cycle, unplug the mn € same time an = in a citric acid cleaning) Power Plug and wait more — 5 the Display shows Pp 3 g =] play E 0 42 || cycle. (see pg.19) than 5 seconds before r— a rotating square. SET / |175 luaaina back i E plugging back in. Ci — : Please contact the store where you = | £3 jor | EM | 5 Indicates malfunction. > purchased the product or Zojirushi TIE displayed. Customer Service. eThe Inner Lid Gasket is replaceable so please check it every year. When Inner Lid Gasket steam comes out from the gap between the Upper Lid and the Main Body, or becomes white or discolored, replace it with a new one. (see pg.18) ®The plastic part of the Upper Lid may deteriorate over use. If discoloration Plastic Parts occurs or the surface becomes coarse, replace the Upper Lid. 7 The Body becomes e When the water temperature and/or room temperature is high, the outer hot. surface of the Body may reach up to 140°F (60°C). This is not a malfunction. — LN The Power Cord @ The Power Cord may become hot while the water is boiling. This is not a = becomes hot malfunction. < You hear a light sound EThis sound is normal and comes from the movement of the weight which ri closing the Up oer Lid prevents hot water from overflowing when the product is closed. elf water is filled from a faucet or the product is placed directly on a sink — E Humidity builds in the and the bottom becomes wet, water may go inside of the Main Body and = Display window. the Display may show moisture. If this happens, stop using the product and allow it to dry as it may cause short circuit or electric shock. The Nonstick Coating of the Inner Container may become damaged over use. Contact the retail store where you purchased this product or call Zojirushi Customer Service at: 1-800-733-6270 23 7 ZÓJIRUSHI www.Zojirushi.com CV-DYC 1 ©®
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement