Zojirushi CD-NAC40/50 Owner Manual

SE? ZOIIRUSHI
MICOM WATER BOILER & WARMER OPERATING INSTRUCTIONS
CD-NAC40/CD-NAC50
®Always follow basic safety precautions when using electrical appliances. Read all instructions carefully. Please keep
these Operating Instructions at hand for easy reference.
IMPORTANT SAFEGUARDS..............—.____.——.—. 2
SPECIFICATIÓNS................... ==... 2eeeeneeee— 5
PARTS NAMES AND FUNCTIONS.................. 6
BOIL MODE.........oo iirc 8
DISPENSE HOT WATER... 10
DISPOSE WATER... 10
REBOIL MODE.........cooiiie eee 11
AUTOMATIC SHUT-OFF FUNCTION............. 11
HOW TO SET THE KEEP WARM MODE....... 12
QUICK TEMP MODE... ==... 14
ENERGY-SAVING TIMER FUNCTION........... 14
CAFE DRIP DISPENSING MODE.................. 15
HOW TO CHANGE THE NOTIFICATION SOUND......15
CLEANING AND MAINTENANCE.................. 16
© HOW TO REPLACE THE INNER LID GASKET......16
HOW TO PERFORM CITRIC ACID CLEANING......17
REPLACEMENT PARTS... 17
Q8A ON PRODUCT USE.................. 18
TROUBLESHOOTING GUIDE....................... 18
ZOJIRUSHI CORPORATION
IMPORTANT SAFEGUARDS
BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED WHEN
USING ELECTRICAL APPLIANCES, INCLUDING THE FOLLOWING:
1.
2.
8.
9
10.
11.
12.
13.
14.
15.
16.
Read all instructions thoroughly.
Avoid touching hot surfaces and do not close or clog the steam vent opening under
any circumstances. The handles and knobs are provided for your safety and
protection.
. To safeguard against fire, electric shock and possible injury, keep the power cord,
plugs and the appliance away from water or other liquids.
. Close supervision is recommended when any appliance is used by or near
children.
. Unplug from outlet when not in use and before cleaning. Allow the appliance to
cool before adding or removing parts, and before cleaning the appliance.
. Do not use or operate any appliance with a damaged cord or plug. If the appliance
malfunctions or has been damaged in any manner, unplug the appliance and return
it to the nearest authorized service facility or dealer for examination, repair or
adjustment.
. The use of accessories or attachments not recommended by the appliance
manufacturer may result in fire, electric shock or other injury to persons.
Do not use outdoors.
. Keep the power cord away from hot surfaces and do not let the cord hang over the
edge of tables or counters.
Do not place on or near a heated surface such as a gas or electric stove, or in a
heated oven.
Always use extreme caution when moving an appliance containing hot liquids.
The plug to the appliance should be attached first before plugging the cord into a
wall outlet.
Do not use the appliance for other than intended or specified purposes.
To protect against electrical hazard, unplug the cord before cleaning.
Scalding may occur if the lid is removed during boiling cycles.
Do not remove the Control Panel or the Water Level Gauge.
SAVE THESE INSTRUCTIONS
THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY.
A.
B.
C.
A short detachable power-supply cord has been provided for your safety. To
reduce risks from entanglement or tripping, a longer cord is not recommended.
Extension cords should only be used if care is exercised.
If using an extension cord: (1) the marked electrical rating of the detachable
power-supply cord or extension cord should be at least as high as the electrical
rating of the appliance; (2) if the appliance is of the grounded type, the extension
cord should have a ground-type 3-pronged plug; and (3) the longer cord should not
drape over the countertop or tabletop where it can be pulled on by children or
tripped over.
IMPORTANT SAFEGUARDS (cont.)
Before use
These WARNINGS and CAUTIONS are intended to protect you and others from personal injury and
household damage. To ensure safe operation, please follow carefully.
Do not modify the product. Only a repair technician
may disassemble or repair this unit.
* Attempting to do so may cause fire, electric shock or
injury. Make any repair inquiries to Zojirushi Customer
Service.
Do not immerse the product in water or splash it
with water, and do not put it on a wet surface such
as a sink.
* Doing so may cause short circuit or electric shock.
Do not allow liquid to come into contact with the
Receptacle or Power Cord.
* Doing so may cause short circuit or electric shock.
Do not plug or unplug the Power Cord if your
hands are wet.
* Doing so may cause electric shock or injury.
Do not touch the Steam Vent or bring your hands
or face near the Steam Vent.
* Doing so may cause burns or scalding. Take special
precautions with children and infants.
Do not cover the Steam Vent with anything such
as a dishcloth.
* Hot water may spill out, resulting in scalds. It may also
cause deformation or discoloration of the Upper Lid or
breakdown of the product.
Do not allow children to use the product
unsupervised. Keep it out of the reach of infants.
* Children are at risk of burns, electric shock or injury.
Do not fill over the Maximum Water Level Line.
* Overfilling may cause hot water to spill out, resulting in
scalds.
Always remove the Upper Lid before disposing
hot water.
* The Upper Lid may fall off and cause hot water to splash,
resulting in scalds.
Do not tilt or shake the product or carry in your
arms. Do not move it or drain hot water by holding
the Upper Lid.
* Doing so may result in scalding by hot water spilling out
from the Spout or Steam Vent, even if the Automatic
Dispense Lock is on. Always use the handle when
carrying.
Do not tilt the product or tip it over.
° Hot water may spill from the Spout or Steam Vent,
even if the Automatic Dispense Lock is on.
Do not slam the Upper Lid when closing.
* Hot water may dispense or spill out, resulting in scalds.
Do not use the product if the Power Plug or Power
Cord is damaged or if the Power Plug is loosely
inserted into the electrical outlet.
* Doing so may cause electric shock, short circuit or fire.
Close the Upper Lid securely.
* Hot water may spill out when the product is overturned,
resulting in scalds.
Do not remove the Upper Lid while boiling.
Do not damage the Power Cord.
* Do not bend, pull, twist, fold, or attempt to modify the
Power Cord. Do not place it on or near high
temperature surfaces or appliances, under heavy items
or between objects. A damaged Power Cord can cause
fire or electric shock.
Do not use the product as a cooler or place ice
inside of it.
* Doing so may cause condensation, resulting in electric
shock or breakdown of the product.
Do not allow the end of the Appliance Plug to
become soiled with dust or come into contact with
any metal objects.
* Doing so may cause electric shock, short circuit or fire.
Do not allow infants or children to put the
Appliance Plug in their mouth.
* Doing so may cause electric shock or injury. Take
special precautions with children and infants.
Insert the Power Plug completely and securely
into the electrical outlet.
* A loosely inserted Power Plug may cause electric
shock, short circuit, smoke or fire.
Use only an electrical outlet rated at 15 amperes
minimum, and do not plug other devices into the
same outlet.
* Plugging other devices into the same outlet may cause
the electrical outlet to overheat, resulting in fire.
If the blades or surface of the Power Plug become
soiled, wipe them clean.
* A dirty Power Plug may cause fire.
Do not use a power source other than 120 V AC.
* Use of any other power supply voltage may cause fire
or electric shock.
Do not boil anything other than water.
* Attempting to boil, cook, or heat up the following items
may cause bubbling or boiling over, which may cause
scalding. Doing so may also cause clogging of the water
route or Electric Pump, corrosion of the Inner Container,
or peeling of the Nonstick Coating.
* Milk, sake, soup, charcoal, tea bags or tea leaves.
* Instant food.
* Food and sauce pouches or foods in plastic bags.
Replace the Inner Lid Gasket if it hardens, changes
Shape, turns white, or otherwise becomes worn out.
* Hot water may spill out when the productis tilted or
tipped over accidentally, and may cause scalding.
Steam may also leak out from the gap and cause burns
or product failures.
®The illustrations used in these Operating Instructions may vary from the actual product you have purchased.
IMPORTANT SAFEGUARDS (cont)
This product is not intended for
use by persons (including
children) with reduced physical,
sensory or mental capabilities, or
lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use of the
product by a person responsible
for their safety. Children should
be supervised to ensure that they
do not play with the product.
Stop using immediately if you notice any of the following symptoms
indicating a malfunction or breakdown.
* Continued use of the product may cause smoke, fire, electric shocks or injury.
* The Power Plug or Power Cord has become very hot.
* The Power Cord is damaged or the electricity turns on and off when touched.
* The Body is deformed or unusually hot.
* Smoke is arising from the product or there is a burning smell.
* Some parts of the product is cracked, loose or unstable.
* The product emits steam for at least 10 minutes continuously and does not
turn to Keep Warm mode.
* Water leaks from the Body.
If any of the above occurs, unplug the product immediately and return to
Zojirushi Customer Service for check-ups and/or repairs.
CAUTIONS
Always use caution when opening the Upper Lid
and avoid skin contact with steam.
* Loose water or steam may escape upon opening the
Upper Lid and cause scalds.
Do not touch hot surfaces during or for a short
period of time after use.
e Touching hot surfaces may cause burns. Be especially
careful with metal parts such as the Inner Lid and the
Inner Container.
Please allow the product to cool down before
cleaning.
* Touching hot surfaces may cause burns.
Do not use the product near walls or furniture.
* Steam or heat may damage, discolor or deform walls or
furniture.
Do not swivel or move the product while
dispensing water.
* Hot water may splash out, resulting in scalds.
Do not place or use the product on unstable surfaces.
* Doing so may cause scalds or injuries.
Do not use on surfaces that are sensitive to heat.
* Doing so may cause fire.
Do not attempt to dispense hot water while it is
boiling.
* Hot water can spurt out, resulting in scalds.
Do not use other Power Cords than the one provided.
Do not use the Power Cord for other appliances.
Do not use the Power Cord for overseas models.
* Doing so may cause malfunction or fire.
Do not place the product over direct flame (such
as a gas stove top), or on top of electric or
induction heating (IH) cookers.
* Doing so may cause fire, breakdown or damage of the
product.
Unplug the Power Plug from the outlet when the
product is not in use.
® Leaving the Power Plug in an outlet may cause the
insulation to become damaged, resulting in electric
shock, short circuit or fire, or result in injuries or scalds.
Do not touch the Lid Lock when carrying the product.
* Doing so may cause the Upper Lid to open, resulting in
injuries or scalds.
Always unplug the product by holding the Power
Plug, not by pulling the Power Cord.
* Pulling the Power Cord to unplug the product may
cause electric shock, short circuit or fire.
If the Power Cord is damaged, it must be replaced
by an appropriate cord or assembly made
available by the manufacturer or its service agent.
IMPORTANT
Do not operate the product when it is empty.
* Doing so may burn or damage the product.
Avoid rough handling, dropping or bumping the
product.
* Doing so may cause damage or cease operation of the
product.
Avoid letting steam make contact with cabinets and
Walls when using near or under a kitchen shelf.
* Doing so may cause discoloration or deformation.
Allow the product to dry completely when storing
the product for a long period of time where it may
reeze.
* |f water left inside freeze, it may cause breakdown or
malfunction.
Avoid using the product near a radio, TV, computer, etc.
* The product may cause interference with certain electronics.
Do not drag the product over any surface while
attempting to move.
* Doing so may cause damage to surfaces such as
countertops.
Do not allow hot water to come into contact with
the Control Panel or the Water Level Gauge.
* Doing so may cause breakdown of the product.
Do not use the product where its steam may come
into contact with other electrical appliances.
* The steam may cause fire, malfunction, discoloration or
deformation to other electrical appliances.
This appliance is intended to be used in household.
SPECIFICATIONS
Model No. CD-NAC40 CD-NAC50
Capacity 135 oz. (4.0 liters) 169 oz. (5.0 liters)
Rating AC 120 V 60 Hz
Electric Consumption 800 W
Average Power 208°F (98°C) Approx. 36 W Approx. 39 W
Consumption | 195°F (90°C) Approx. 31 W Approx. 34 W
during Keep [175°F (80°C) Approx. 25 W Approx. 27 W
160°F (70°C) Approx. 22 W Approx. 24 W
Length of the Power Cord 2'11" (0.9 m)
External (approx. inches) | 9-14 (W) x 12-14 (D) x 11-74 (H)| 9-16 (W) x 12-15 (D) x 13-15 (H)
Dimensions | (approx.cm) | 23 (W) x 31.5 (D) x 30 (H) 23 (W) x 31.5 (D) x 34 (H)
\ Weight (including the Power Cord) Approx. 7 Ibs. (3.2 kg) Approx. 8 Ibs. (3.4 kg) —
e The average Keep Warm electric power consumption is for one hour, provided that the Inner
Container is full and the room temperature is approximately 73°F (23°C).
Oe The height refers to the product when the handle is down.
@®In high altitudes or severely cold areas, the product may not perform as specified. Avoid using the
product in such areas or in other extreme conditions.
e This product is not suitable for use in countries or regions with different power supply voltages or
frequencies.
PARTS NAMES AND FUNCTIONS
Lid Lock
The light sound you may hear
when opening and closing the
Upper Lid is normal. (see pg.19)
= Steam Vent
N) ®Exercise care during the
- = boiling process as steam
<> Upper Lid emitting from the Steam
Inner Lid Gasket Vent is very hot.
(Consumable Part)
elf the Inner Lid Gasket hardens, changes shape,
turns white, or otherwise becomes worn out, please
replace it with a new one. (Separate charge
required.) (see pg.16)
Not doing so may cause hot water to leak when the
product IS tited or tipped over, resulting in scalding. Inner Container
team leaking from the gap may also cause burns :
or product failures. (Nonstick Coated)
—)
Inner Lid
Water Removal Area Hinge
eDrain water here. | |
Maximum Water Level Line CF SN Handle
Control Panel
Spout Water Level Li
Hot water dispenses from here. Г Ф------------ -- ater Level Lines
®Use as a guide when
Water Level Gauge ` adding water.
| Bod
EE ne = Receptacle
ill water above the line. a Appliance Plug inserts here.
AQ
Filter в НН
eFor care and use instructions, ,
see pg.16. A Swivel Base
eDo not let the Power Cord
wrap around the Main
Body when turning.
Twist Tie
ePlease remove the twist tie holding the Power Cord before use.
eDo not use the Power Cord bundled up. Doing so may cause
the Power Cord to become excessively hot, resulting in
malfunction.
Appliance Plug
Power Plug Cord
PARTS NAMES AND FUNCTIONS (cont.)
® Press buttons down firmly.
C O NT R e L р A № = L e The Notification Sounds and raised dot ( e ) in the center of the
DISPENSE button is provided for those with visual impairment.
DISPENSE button UNLOCK button
Press to dispense hot water. (see pg.10, 15) Press once to unlock. (see pg.10)
P | | Cafe Drip Di
REBOIL/QUICK TEMP button mode. (See pg.15) о
Starts the Reboil mode. (see pg.11) Hold for at least 3 seconds to change the
Sets the Quick Temp mode. (see pg.14) Notification Sound. (see pg.15)
Also used when performing the Citric Acid UNLOCK light
Cleaning (to initiate cleaning, press this =
button for more than 3 seconds). (see pg.17) CAFE DRIP light
„| > REBOIL ; '
\ ws foREOL] ( pigpEngE | (моск!
BOIL light
TEMP | 208 == =;
KEEP WARM light\ 7" e SET | un == A| МЕ
N 1750 O
TEMP SET button
Sets the Keep Warm temperature. ENERGY-SAVING TIMER
(see pg.12) > 0 button
Display Use when setting the
Energy-Saving Timer function.
LCD display shows the water temperature (see pg.14)
and Timer settings.
NOTE: Illustration is for reference only. Actual display
will not show all functions simultaneously during use.
How to Detach/Attach the Upper Lid
How to Open/Close the Upper Lid
To Open @ Press the indented area of the To Detach @ Open the Upper Lid to about
Lid Lock with your thumb. a 45-degree angle.
O Pull the Lid Lock up with your @ Push the Upper Lid Detach
fingers to open the Upper Lid. © Pull the Upper Lid forward
To Close Depress the Upper Lid until it and up at an angle.
clicks shut. To Attach Push the Upper Lid back into
Indented Area of place at the same angle.
the Lid Lock
About 45 *,
degrees
Upper Lid
Detach button
BOIL
MODE
Open the Upper Lid and fill the
Inner Container with water using
a pitcher or other container.
To monitor the amount of
Maximum Water
water you are filling, look at Level Line A <A (7 >
the thickness of the stripes on << | eDo not fill the Inner
the Water Level Gauge. A > HESS 7 Container directly
When the Inner MAX SSRN BH ( from a water faucet
Y Container is empty. "==> ZA or place the product
mal
The stripes on the
Water Level Gauge
appear thicker when
water is added.
on a wet surface
such as a sink.
— Water —— :
Level „| Present Water (Exposing the
Gauge Level heating element
directly to water
may cause
malfunction.)
@Avoid splashing
water on the Body or
Control Panel. (May
cause malfunction.)
N
It automatically starts the boiling
Lid Lock process.
The BOIL light turns on and the Display
shows the water temperature.
Below 170*F: Display shows the water
temperature in 10°F increments.
Above 175°F: Display shows [175] [180]
> [185] > [190] — [195] > [200] > [205] > [212].
Short beep
175
160
Close the Upper Lid securely.
| To ensure safe operation while | If the Lid Lock is sticking up,
it is not closed completely.
=
boiling and to prevent scalds if
the product is overturned.
J
. | 4 REBOIL
ТЕМР A ™ quick Tew
TEMP
"=: to set the Quick Temp me
\
A
>
No
— e
Be sure to insert the
Power Cord securely. @Do not allow the end of the
Otherwise, may cause |
| electric shock, short Appliance Plug to get soiled with
(see pg.14)
1 dust or come into contact with
circuit, smoke or fire. metal objects such as pins.
E Temperature
Conversion Guide
Fahrenheit (°F) | Celsius (°C)
The first time
you use the product you
212 100 may notice the smell of
508 os | sévessenseensentenstensennsennte plastic. This is normal
195 90 @At your initial use or when X and will gradually fade
175 80 using the product after a long
160 70 period of storage:
73 23 Fill the Inner Container with water to the Maximum Water
| | В Level Line (8. ), апа boil water as directed. Once it
@Do not fill over the Maximum Water MAX
Level Line. (Hot water may overflow reaches a boil, press the UNLOCK button, then press the
from the Steam Vent.) DISPENSE button to dispense about 34 oz. (1 liter) of hot
Do nol ho Automato ShUEOR function water in order to rinse the water route, and dispose the
may be activated.) (see pg.11) remaining water. Fill with fresh water.
®Do not fill the Inner Container with any | | (Always remember to attach the Filter) eee
liquid other than water. . y A Tay! ,
eDo not use water additives such as ®When using mineral or alkaline ionized water:
charcoal for water purification or When mineral or alkaline ionized water is used, a floating
mineral additives. (Small particles may residue may develop or a milky white substance may form
get clogged inside of the product.) on the surface of the Inner Container. This is due to the
и you wish to shorter tne completion ingredients in the water and is harmless to your health.
Container aera the nner Frequent cleaning is recommended.
J
How to change the Notification Sound
from a melody to a beep. (see pg.15)
When boiling has completed, a melody
sounds and it automatically switches How to set the Keep Warm mode:
to 195°F Keep Warm mode. ;
208 F Keep Warm Mode. (see pg.12)
The BOIL light turns off, the KEEP WARM light 175°F Keep Warm Mode. (see pg.12)
turns on and "212" appears on the Display. 160°F Keep Warm Mode. (see pg.13)
When the water
$ temperature drops to about
195°F, "195" appears on
QUICK ... | A REBOIL fa, the Display. D
TEMP 7 ono ON a 0
@Add water when the water level is
low during the Keep Warm mode.
208 208 "sn (The product automatically begins
¡ =.
« f ла heating the water.) If the water level
175 175 is still not high enough, it will not
160 =) 160 automatically switch to Boil. In this
case, press the REBOIL/QUICK
TEMP button to manually start the
Length of time until the water process. (see pg.11)
temperature reaches about 195°F: ePlease follow the instructions below
= to prevent the risk of scalding:
CD-NAC40 |Approx. 35 minutes CD-NAC40 | Approx. 45 minutes | | ° Do not cover the Steam Vent with a
x cloth.
CD-NAC50 |Approx. 42 minutes | |CD-NAC50 | Approx. 45 minutes | | - Do not touch the Steam Vent or
bring your hands or face near the
Turns on
Time required to boil water:
(At a room temperature of 73°F with the (At a room temperature of 73°F with the
етре \ етре : Steam Vent.
Inner Container filled to the Maximum Inner Container filled to the Maximum . .
Water Level Line with water temperature Water Level Line.) " Do not open the Upper Lid while
at 73°F.) ®The length of time for the water the light is on. но
% Includes approx. 4 minutes to temperature to reach 195°F will vary Do not dispense hot water while it
Dechlorinate. depending on the temperature of the is boiling.
room and water. \_ J
10
DISPENSE HOT WATER
1 Press the button. 2 Press the button to dispense hot water.
The UNLOCK light turns on and
hot water can be dispensed.
Do not swivel the product while dispensing water.
®Initially upon boiling or if it has been a while after dispensing, the
es water may not be very hot. Please discard the first cup (of the hot
water).
|
Do not unlock and press the eDo not attempt to dispense hot water while boiling.
DISPENSE button if the Inner я "
Container is empty. ®Water may not dispense smoothly shortly after boiling. Wait for a
short period of time before dispensing hot water again.
®Be careful as the Body heats up during the Boil and Keep Warm
modes.
D | S P 0, S E WAT E R Dispose leftover water when the product is not in use.
Unplug the Power Cord Hold the product with both hands and dispose water where indicated
and detach the Upper Lid. "EMPTY FROM HERE" on the wall of the Inner Container
Hold the Handle securely.
Spout
dy
When disposing hot water:
\ ®Take precaution with the
hot water and steam.
You may scald yourself.
®Take precaution as hot
water may drip from the
| Spout, causing scalds. J
\
Water Removal EAN
Area HERE
[ When detaching the Upper Lid:
®Take precaution with the steam.
You may scald yourself.
DISPENSE HOT WATER (cont.)
7 Reboil mode This function is used when reboiling >
water in the Keep Warm mode.
—
REBOIL The BOIL light turns on when
Turns off Press the © wx) button. the boiling process begins.
Time required to
UNLOCK® | O stow Short beep finish reboiling
N (At a room temperature of
73°F / 23°C with the Inner
Container filled to the
10 seconds after dispensing, loc Hamm Peele To)
the UNLOCK light turns off — Mala 208°F Keep Warm Mode
and the Automatic Dispense 160 Approx. 4—6 minutes
Lock is activated. U 195°F Keep Warm Mode
Automatic Dispense Lock When the Reboil process is completed, | Approx. 7-9 minutes
A safety function to prevent hot water a melody sounds and the product
from dispensing if the DISPENSE switches to Keep Warm mode.
button is accidentally pressed. ePressing the REBOIL/QUICK TEMP button twice activates the
®Lven if no water is dispensed, the Quick Temp mode. (see pg.14)
Automatic Dispense Lock will be ®Do not attempt to dispense hot water while reboiling.
__ activated after about 10 seconds. ®\Water may not dispense smoothly shortly after boiling. Wait for
"Do not tilt or shake the a short period of time before dispensing hot water again.
product after dispensing. Hot e
Make sure the water level is above the REFILL Line
water may drip from the Spout, > before pressing the REBOIL/QUICK TEMP button. |
| causing scalds. N
~ Automatic Shut-Off function —
— CD a QUICK 4 een" eBe careful not to
repeat the boiling
ТЕМР ^^
process without filling
the Inner Container
HH with water, as the
175 Nonstick Coating may
REBOIL
QUICK TEMP
eDo not plug or unplug the
Power Plug or Appliance Plug
with wet hands. (Doing so
may cause short circuit or
electric shock.)
Beeps will
: sound, 2 lights 160 discolor and peel.
@Do not dispose hot water with will turn on and
the Upper Lid in place. (The bined Fa a
Upper Lid may come off, ‘
spilling hot water and causing
scalds.) The Automatic Shut-Off function activates to shut down power to the
EDo not allow water to splash heater in order to prevent damage from overheating. The Display will
on the Control Panel, Hinge,
Handle or Receptacle. (Could
show "HH" and beeps will sound to alert you that the Automatic Shut-Off
has been activated. The following conditions may cause activation:
cause scalding or ®When plugged in without filling the Inner Container with water.
breakdown.) eWhen the water level is lower than the REFILL Line and boiling
®Take precaution as not has been attempted.
attaching the Filter properly eWhen the Inner Container is empty or the Upper Lid is left open for
may cause it to fall out when
dispensing hot water.
eDispose the water at least
once a day. (Leaving water in
the Inner Container can Unplug the product. Allow the Inner Container
cause unwanted odor or scale FEE) to cool. Fill the Inner Container with water and
build-up.) ) \_ plug back in.
adding water.
eWhen pouring in hot water immediately after plugging in the unit.
12
HOW TO SET THE KEEP WARM MODE
Press the [or] button to
change the settings.
Each press of the button changes the position
of the " 4 " on the Display.
195 — FRA — KES — ERA — KE |
(Default) L |
eOnce the temperature is set, it is stored in memory
even when the product is unplugged.
For making coffee, tea and instant noodles
208°F Keep Warm Mode
208°F is ideal for making coffee, tea and
instant noodles.
For making Japanese (green) tea
175°F Keep Warm Mode
175°F is ideal for making Japanese
(green) tea.
Select the "208" on the Display.
À REBOIL
QUICK TEMP
When the boiling process has completed,
a melody sounds, the BOIL light turns off
and the KEEP WARM light turns on.
When the water
temperature reaches
208°F, "208" appears on
the Display.
®Depending on the altitude where the product
is used, the Keep Warm mode may be set at
205°F-207°F, in order to prevent continuous
boiling.
Select the "175" on the Display.
À REBOIL
QUICK TEMP
Blinks
When the boiling process has completed, a
melody sounds, the BOIL light turns off, and
the KEEP WARM light begins to blink.
If initiated during Keep Warm mode, the light
will blink 2 seconds after the selection.
+ 2 short beeps
When the water
temperature reaches
about 175°F, "175" | TEMP
appears on the Display, SET
and the KEEP WARM —
light stops blinking and
remains on.
| When water is boiled in the Quick Temp mode, |
the KEEP WARM light does not blink but turns
on. (see pg.14)
HLength of time for the water temperature to
reach 175°F after boiling:
CD-NAC40
CD-NAC50
Approx. 2 hours and 20 minutes
Approx. 2 hours and 20 minutes
(At a room temperature of 73* F with the Inner Container
filled to the Maximum Water Level Line.)
e The length of time for the water temperature
to reach 175*F will vary depending on the
room temperature and amount of water.
HOW TO SET THE KEEP WARM MODE (cont.)
< X
Short beep
208 < “1070. ®You can change the temperature setting during
¢ 1 the Keep Warm mode.
175 Gias->- (It may start reboiling depending on the water
temperature and the selected setting.)
e You cannot select the 208°F Keep Warm mode
while the Quick Temp mode is selected.
* You will hear 2 short beeps when 195°F
Keep Warm mode is selected.
For preparing baby formula
160 F Keep Warm Mode
160°F is ideal for preparing baby formula.
Select the "160" on the Display.
When the boiling ®If you wish to shorten
process has the time, add less water
completed, a melody to the Inner Container.
sounds, the BOIL
light turns off, and
the KEEP WARM
light begins to blink.
If initiated during
Keep Warm mode,
the light will blink 2 Fill water up to 1.0
seconds after the on the Water Level
selection. Gauge.
2 short beeps
x 2 times
When the water
temperature reaches
about 160°F, "160" TEMP
appears on the Display |
—
SET
and the KEEP WARM
light stops blinking and
remains on.
MLength of time for the water temperature to
reach 160°F after boiling:
1.0L Max Capacity
Approx. 1 hour
CD-NAC40 | and 20 minutes Approx. 4 hours
Approx. 1 hour
CD-NAC50 and 20 minutes Approx. 4 hours E Tem peratu re i
(At a room temperature of 73°F.) Conversion Guide
eThe length of time for the water temperature e (0 ‘не fo
to reach 160°F will vary depending on the Fahrenheit (F)| Celsius (C)
room temperature and amount of water. 212 100
7 1 208 98
When preparing baby formula: 207 97
160°F is ideal for preparing formula. Dissolve the
formula and let cool to optimum temperature 205 96
(slightly higher than body temperature). If fed 195 90
without cooling, babies are at risk of scalding.
- Be sure to check that the KEEP WARM light is on 175 80
and NOT blinking before dispensing. 160 70
| - Do not use the Quick Temp mode. (see pg.14) В
< J 73 23
13
14
QUICK TEMP MODE
This function heats the water to the selected Keep Warm temperature without reaching a boil. The water will reach the
selected Keep Warm temperature quicker than the regular Boil mode. Other benefits include reduced steam and
reduced energy use. Use this mode when dechlorination is not necessary, such as when using bottled or purified water.
Г . . . . в
While the water is heating, After reaching the ;
| 160°F Keep Warm mode:
press the [-**"!) button to selected temperature, IE | 160*F Keep Warm mode:
will automatically switch ce the water temperature .
p ; to Keep Warm. switch to Keep Warm at 160°F
You cannot activate Quick Temp mode while A melody sounds, the Boil light turns off | (70°C). Length of time for the ——
the product is set at 208°F Keep Warm mode. and the KEEP WARM light turns on. water temperature to reach 160°F
after heating up is approx. 30
minutes. (At a room temperature
Short beep и |, REBOIL fa: 6 of 73°F / 23°C with the Inner
^ era N Container filled to the Maximum
Water Level Line.)
O After the KEEP WARM light stops
Turns on TEMP blinking, it will switch to Keep
A SET Warm mode.
N J
Each press of the REBOIL/QUICK ® You cannot select 208°F Keep Warm mode while Quick Temp mode is
TEMP button changes the boil @There may be a lingering chlorine smell if tap water is used while Quick Temp
mode. mode is activated. If this is an issue, use the regular Boil mode instead.
| Regular Boil mode (Default) | @Depending on the room temperature and amount of water the actual water
temperature after heating may differ from that shown on the Display.
@Depending on the temperature of the room and water, and atmospheric
| pressure, some steam may be produced.
| | Quick Temp mode | O The Quick Temp mode may be canceled if the Power Cord is detached. Set to
Holding the REBOIL/QUICK TEMP button for the desired mode again.
more than 3 seconds activates Citric Acid OThe product begins the Regular Boil mode when water is added. Activate the
Cleaning mode. (see pg. 17) QUICK TEMP mode again.
OWater does not reach a boil under Quick Temp mode, and should not be used to prepare baby formula.
D @Although the water will not reach a boil when Quick Temp mode is activated, the Steam Vent will
become hot. Please do not touch it.
< J
ENERGY-SAVING TIMER FUNCTION
The Boiling function will complete after the set time. (The Energy-Saving Timer function helps save energy
by shutting off electricity to the heater until boiling begins.)
A
i Press the | me | button until the desired length of time is displayed.
má Short bee)
Each press of the TIMER button changes the set time.
H for hours =
) хе =
(6H > 7H > 8H > 9H > 10H) —E Or,
Cancel (temperature display) — 160
qe will hear 2 short beeps when 6H is selected.
A melody sounds and the Energy-Saving
Timer function is activated.
Olf the product is idle for about 2 seconds, the time
currently displayed will be applied.
> ,
ww
@®To cancel the Timer, press the TIMER button several = - -
times until the temperature appears on the Display, or (The Boiling function will complete at me)
press the REBOIL/QUICK TEMP button once. set time.
O When using the Quick Temp mode with the
Energy-Saving Timer function, set the Energy-Saving
Timer function after selecting the Quick Temp mode.
elf the Power Cord is detached, the Energy-Saving
_ Timer function will be canceled and must be reset. D
A melody sounds, the BOIL light turns off and the product
switches to Keep Warm mode. (see pg.9, 12, 13)
Boiling may stop earlier than the set time, depending on room
temperature, water temperature and amount of water. |
CAFE DRIP DISPENSING MODE
This mode decreases the amount of water dispensed to 60% of the normal setting, making it suitable for
brewing café drip coffee.
Na
2 Press the
button twice Dispensing mode will reset the product to the normal
dispensing mode. |
When the UNLOCK and @When the UNLOCK and CAFE DRIP lights turn off,
CAFE DRIP lights turn the Automatic Dispense Lock is activated.
on, the Cafe Drip @if the water level is low, it may take longer for water to
Dispensing mode is
begin dispensing after pressing the DISPENSE
activated.
Press the Pressing the UNLOCK button again during Café Drip
Long beep) Turns on
button, or water may not dispense smoothly.
O Water may not dispense smoothly just after boiling
has completed. In this case, wait for a short period of
time before dispensing hot water again.
- «пр ,
@Be careful not to burn yourself.
@lf using a cone filter placed directly on a cup, be
careful not to let it fall inside the cup while brewing.
OThe first cup of water may not be hot enough just after
boiling has completed, or when you have not
dispensed water for a while. Discard a cup of hot
button to dispense
hot water.
You can use the Café
Drip Dispensing mode for water before brewing.
about 60 seconds while ®If the cup or other container that you use is cold, the
the UNLOCK and CAFE hot water may cool quickly. To prevent this, warm the
DRIP lights are on. \_ container before use. J
HOW TO CHANGE THE NOTIFICATION SOUND
@Notification Sound:
The product informs you with a melody or beeps that it has finished
boiling or the timer has been set.
fr
Na
When and what types of Notification Sounds are heard:
When res ono TEN cea E |
Boiling stops Minuet 5 long beeps X
Timer is set Beautiful Dreamer x X
How to change the Notification Sound:
Hold the button for more than 3 seconds during the boiling process or
Keep Warm mode.
Each time the UNLOCK button is held for more than 3 seconds, the Notification Sound will change.
® Melody: @ Beeping: @ Mute:
“Beautiful Dreamer” will play > It will beep 3 times when setup > It will beep once when setup is
when setup is complete. is complete. complete.
1X
2 Setup is complete when the desired sound (melody or beep) is heard.
@The selected Notification Sound is stored even if the product is unplugged.
15
16
Always unplug the Power Cord,
CLEANING AN D MAINTENANCE dispose all water, and allow to cool
completely before cleaning.
(CD @Do not attempt to dry the product by turning it upside down when the bottom is wet. (Water may get inside В
the body and cause it to break or rust.)
@Do not use the following:
- Thinner and bleach. (Doing so may cause discoloration, crack, degradation and corrosion.)
- Polishing powder, nylon brushes, anything made with metal, eraser pads, hard nylon sponges and abrasive cleaners. (Doing so may
cause corrosion.)
- Detergent. (Hot water may spill out, resulting in scalds or damage. Doing so may cause unwanted odor.)
@Do not use scrub brushes for any portions other than the Filter. (Doing so may cause corrosion.)
@\Vhen using chemically treated cloths, do not rub too hard or leave them on the product for a long time as the surfaces of the product
may be damaged by chemical reactions.
@Do not use a dishwasher or dish dryer for cleaning or drying. (Doing so may cause the plastic parts to deform.)
@Before storing the product for a longer period of time, dry it completely and pack in a plastic bag to prevent odors from being absorbed.
\_ @Never wash the Body, Upper Lid, or Power Cord with water. D
Inner Lid Wipe with a soft wet sponge. } Body/Upper Lid Wipe clean with a )
< damp well-wrung cloth.
в Perform the Citric Acid Cleaning
Inner Container (see pg.17) periodically. eDo not get water on or wash the Control
Panel or Water Level Gauge. (If water gets
Especially when... inside, it may cause malfunction or rust.)
®Red rust spots (Rust Stain) is visible on the Inner Container.
®Milky white or gray discoloration and/or filmy objects
are found in the water.
®Boiling is louder than usual.
@Hot water has an odor.
(The condition of the Inner Container will vary depending on
\_ the water quality and frequency of use.) J
x
Remove the Filter from the Inner
Container and wash with a soft brush.
Pull the Filter up to release, and press
down firmly to attach.
If you find it difficult to clean the Filter, replace
it with a new one. (see pg.17)
ONever use the product without installing the Filter.
(The Filter prevents foreign objects from entering the water
route or Electric Pump and obstructing the flow of hot water.) |
и
Power Cord Wipe clean with a dry cloth. )
The Inner Lid Gask d to be replaced d | d
HOW TO REPLACE THE INNER LID GASKET year. We recommend nat you replace À about once a year,
Wipe new Inner Lid Gaskets with a wet soft sponge before attaching to the Inner Lid.
To remove the Inner Lid Gasket When the Inner Lid Gasket
Please purchase
(DRemove the four screws, and remove the Inner Lid. hardens, changes shape, A and replace with
OBe careful not to lose these screws. turns white, or otherwise a new one.
@Remove the Inner Lid Gasket which is installed on the SU A UE
Inner Lid. Hole on the Screws (x4) Crm)
After removing the Inner Lid, check the plastic part of Inner Lid Inner Lid
the Upper Lid for abnormalities. Gasket
—|f this part is discolored or if it feels rough to the touch,
replace it (there will be a fee for this).
To attach the Inner Lid Gasket
(DFit the Inner Lid Gasket securely to the outer
circumference as shown in the figure.
(Line up the pin on the Upper Lid with the hole on the
Inner Lid, and tighten the four screws securely.
Inner Lid
ó EHRS
Inner Lid Gasket
>
Inner Lid
If the Inner Lid Gasket hardens, changes shape, turns white, or otherwise
becomes worn out, hot water may leak from the gap between the Upper Lid
and Body when tilted. Steam may also leak from the gap, causing burns
and product failures, which may result in scalds. If hot water spews from
the gap or there is steam even after replacing the Inner Lid Gasket, other
parts may be in need of repair. Please contact Zojirushi Customer Service.
Perform every 1-3 month(s) of usage
HOW TO PERFORM CITRIC ACID CLEANING 06 rot arr
the water used
In order to prevent gas bubbles and bubbling-over, the Citric Acid Cleaner for for citric acid
QP Electric Water Boilers (CD-KO3E-JU) is recommended for cleaning. To purchase cleaning.
this cleaner, please visit an authorized Zojirushi dealer or www.zojirushi.com.
4 N
Preparation: up
. . elf the Filter is dirty, remove it from the
Check that the Filter is attached inner Container, wash with a soft brush
to the Inner Container. and reinstall.
1 Put 1 package of the Citric Acid Cleaner «UD
CD-K03E-JU in a cup and add warm water to Do ret fll over the Maximum Water Level Li
dissolve. Pour it into the Inner Container and 0 not ill over the Viaximum viater Level Line.
. . . . Hot wat Il out, It lds.
fill with water to the Maximum Water Level Line. \_(“° Water may spil out, resulting in scalds.)
2 Close the Upper Lid, insert the Power Plug and press the |"! button for
more than 3 seconds. —
| Beeps when the cleaning process begins. | | Beeps when the cleaning process is completed.
— — Cleaning time: _
MTL QUICK TEMP pprox. 1.5 nours.
Г, * Cleaning times may var
Su O SET depending on the amount
ee ee of water, water
temperature and room
temperature.
The square 2 lights will stop LCD display will
shown on the blinking and stay show a square as
Display rotates. on. illustrated.
Unplug the Power Plug, detach the
Upper Lid and dispose water where ( When disposing hot water: )
indicated "EMPTY FROM HERE. —
(Please take precautions not to splash water ® Take precaution with the hot water and
on the Hinge.) steam. You may scald yourself.
: : : : ®Take precaution as hot water may drip
4 To rinse, fill the Inner Container with from the Spout, causing scalds.
water. Boil and dispense about a cup of
hot water to rinse out the Spout, allow to elf mineral or alkaline ionized water is
cool, then dispose the remaining water. used, calcium tends to build up on the
surface of the Inner Container. If scale
To cancel the Citric Acid Cleaning at any time, accumulates on the Inner Container or the
unplug the Power Plug for more than 5 seconds. Filter, boiling may become louder than
usual and water may not dispense
a @Repeated citric acid cleaning may be smoothly. Frequent cleaning IS
D necessary for hard-to-remove residues or recommended when using mineral or
e if water does not dispense smoothly. alkaline ionized water.
J
REPLACEMENT PARTS
eReplacement parts may be available for an additional Parts Names Parts Number
charge. Please replace damaged parts only with new parts. | Lid Gasket BE426007M
eWhen replacing parts, please record the model number and nner 10 aaske 6007M-00
part name beforehand. Parts can be purchased through Filter 627402-00
Zojirushi.com, by contacting Zojirushi Customer Service, or Citric Acid Cleaner for
the store where you purchased the product. Electric Water Boilers CD-KO3E-JU
Zojirushi Customer Service (1 oz. / 30 gX4 packets)
1-800-733-6270 www.Zojirushi.com
17
18
Q&A ON PRODUCT USE
Is it okay to use the product for
heating liquids other than water?
>
Does the water need to be
changed every day?
Do not fill the product with any liquid other than water. It may cause
malfunction, or may overflow and cause scalding.
D pg.3
To prevent odor and scale build-up, please change the water at least once > pg.10
> a day.
Is it okay to use mineral water
or alkaline ionized water?
>
Yes. However, when mineral or alkaline ionized water is used, a floating
residue may develop or milky white substance may form on the surface of » pg.9
the Inner Container. This is due to the ingredients in the water and is
pg.17
harmless to your health. Frequent cleaning is recommended.
| accidentally drank water while
performing the Citric Acid Cleaning.
|s this harmful to my health?
Please follow the instructions shown on the package of the citric acid
> cleaner CD-KO3E-JU.
Is it okay to leave the product
unattended while it is turned on?
>
It is safe to use the product unattended as it has an Automatic Shut-Off function
(power to the heater will be automatically turned off), which will be activated once it
is empty of water. However be careful not to repeat the boiling process without filling
> pg.11
the Inner Container with water, as the Nonstick Coating may discolor and peel.
TROUBLESHOOTING GUIDE
Please check the following
points before calling for service.
Condition MN “cause (
Water does not heat up.
Remedy )
Water does not boil.
Power Plug is not connected to an electrical outlet. > ( Connect the Power Plug. )
(
The Quick Temp mode is selected.
(Water does not reach a boil under Quick
Temp mode.)
N
Press the REBOIL/QUICK TEMP button,
select the regular Boil mode. (see pg.14)
Hot water has a
disagreeable odor.
e A mild plastic odor may be
noticeable with a new product.
This odor will gradually fade
away.
e You may smell chlorine (used
for sterilization of tap water)
after boiling.
| 4
Scale or other residue has accumulated )
on the Inner Container.
You have not performed citric acid
cleaning regularly.
The product has not been used for a long )
time.
Tap water is used under Quick Temp mode. >
N J
=
Perform citric acid cleaning.
(see pg.17)
= 7
(Boil water, press the UNLOCK button, and |
then dispense about 34 oz. (1 liter) of hot
| water. Discard the remainder. (see pg.9) |
(If this is an issue, use the regular Boil
mode instead. (see pg.14)
The regular Boil mode purges chlorine in
\_tap water by boiling completion. D
Water leaks from the Spout or
spills out from the Steam Vent.
Check that the Inner Container is not filled
over the Maximum Water Level Line.
=
Pour out the excess water until it is below
the Maximum Water Level Line.
J
Steam emits while heating water
using the QUICK TEMP mode.
e The QUICK TEMP mode does not heat water until it boils. However, some steam may
be produced depending on the temperature of the room and water, and the atmospheric
pressure.
The Quick Temp mode cannot
be selected.
Is the 208°F Keep Warm mode selected? >
f Select the 195, 175 or 160°F Keep
Warm mode, then select the Quick Temp
« mode. (see pg.14) ))
The 208°F Keep Warm mode
cannot be selected during the
Quick Temp mode.
You cannot select the 208°F Keep Warm >
mode during the Quick Temp mode.
4 N
Use the Quick Temp mode for other than
208°F Keep Warm mode. (see pg.14)
\ J
There is no Notification Sound
(no sound when pressing
buttons).
Did you mute the sound? >
7
Adjust the Notification Sound setting.
(see pg.15) J
Water does not dispense or
does not pour properly.
Hot water does not pour properly a few >
minutes after boiling.
Scale or other residue has accumulated >
on the Inner Container and Filter.
The Automatic Dispense Lock is >
activated.
(Bubbles form from the bottom of the Inner)
Container while water is being heated.
Wait for a short period of time before
dispensing hot water again.
E the Inner Container and Filter.
AN
(see pg.16)
AX
Press the UNLOCK button, then press the
DISPENSE button. (see pg.10)
Condition NX cue _l
Water does not dispense or
does not pour properly.
Power Plug is not connected to an electrical outlet. ) (comec the Power Plug.
Scale may build up in the water route or Electric
Pump and prevent water from dispensing smoothly.
A filmy, floating residue is
noticeable. (Could the Nonstick
Coating be peeling off?)
Residue is due to the mineral content in
water, not from corrosion of the Inner
Container or peeling of the Nonstick Coating.
Milky white and rough-surfaced
objects have built up on the
surface of the Inner Container.
Boiling is louder than usual.
Excessive accumulation of scale and
other build-up on the surface of the Inner
Container can cause boiling to become
louder.
Red rust-like spotting appears
on the surface of the Inner
Container.
Caused by iron in the water, not
deterioration of the Inner Container.
Remedy
II
perform citric acid cleaning.
(see pg.17)
Scale
Over time and use, calcium
and other minerals
contained in water build up
on the surface of the Inner
Container and the Filter. It is
called "scale" and is
harmless to your health.
N J
A white floating residue is
noticeable.
Remove the Inner Lid and check the
plastic part of the Upper Lid for
abnormalities. (see pg.16)
If this part is discolored or if it feels rough )
to the touch, replace it (must purchase
« separately).
Water is not hot.
Initially upon boiling or if it has been a
while after dispensing, the water may not
be very hot due to water remaining in the
Water Level Gauge.
Is the Timer set?
4
> Please discard the first cup (of the hot
water).
X 7
› | Press the REBOIL/QUICK TEMP button. |
(see pg.14)
The Body becomes hot.
e When the water temperature and/or room temperature is high, the outer surface of the
Body may reach up to 140°F (60°C). This is not a malfunction.
The Power Cord becomes hot.
® The Power Cord may become hot while the water is boiling. This is not a malfunction.
You hear a light sound when
opening and closing the
Upper Lid.
e This sound is normal and comes from the movement of the weight which prevents hot
water from flowing out when the product is overturned.
Humidity builds in the Display
window or the Water Level
Gauge.
e |f water is filled from a faucet or the product is placed directly on a sink and the bottom
becomes wet, water may go inside of the Body and the Display may show moisture.
This may cause short circuit or electric shock. Unplug the Power Cord and contact
Zojirushi Customer Service.
2 lights turn on
and "HH" appears
on the Display.
The Inner Container is low
on water or hot water was
added to the Inner
Container, causing the
Automatic Shut-Off
function to engage.
( ы
Unplug the Power Plug and
wait until the Inner Container
cools down. Add water and plug
in the Power Cord. (see pg.11)
= J
2 lights blink at
the same time and
the Display shows
a rotating square.
ше y: Y A sm
TEMP ZZ orzo)
Yo AEMP | [2087 —
Ne SET IE | a,
e | =
cycle.
The Inner Container is in
a citric acid cleaning
7 >
To cancel the citric acid
cleaning cycle, unplug the
Power Plug and wait more than
5 seconds before plugging back
| in. (see pg.17)
J
Error Displays and their meaning
| £2 || £3 |or| £Y |is displayed.
Indicates malfunction.
> Please contact Zojirushi
Customer Service.
Inner Lid Gasket
® The Inner Lid Gasket is replaceable, and we recommend that you replace it about once a
year. If steam leaks from the gap between the Upper Lid and the Body, or if the Inner Lid
Gasket hardens, changes shape, turns white, or otherwise becomes worn out, please
replace it. (see pg.16)
Plastic Parts
Replacement for
the Upper Lid
e The plastic part of the Upper Lid may deteriorate over use. When replacing the Inner Lid
Gasket, check the plastic part. If discoloration occurs or the surface becomes coarse,
replace the Upper Lid (must purchase separately). (We take care in only using materials
for the plastic parts that are safe and hygienic for food contact.)
The Nonstick Coating of the Inner Container may become damaged with use. Contact or call Zojirushi
Customer Service to discuss available options we may have for you: 1-800-733-6270
19
7 ZÓJIRUSHI
www.Zojirushi.com
CD-NAC 1 ©®®