EVERFOCUS

Ultra Series Super Low Light

720+ TVL OSD EWDR

Dual Voltage Box Style Camera

Operation Instructions

Model No.

EQ700

Please read this manual first for correct installation and operation. This manual should be retained for future reference. The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the electromagnetic fields generated from these devices may distort the video image or otherwise interfere with camera operation.

2. Never disassemble the camera beyond the recommendations in this manual nor

introduce materials other than those recommended herein. Improper disassembly or introduction of corrosive materials may result in equipment failure or other damage.

3. Try to avoid facing the camera toward the sun.

In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal circuits, as well as creating unbalanced illumination beyond the capability of the camera to compensate.

4. Keep the power cord away from water and other liquids and never touch the power

cord with wet hands. Touching a wet power cord with your hands or touching the power cord with wet hands may result in electric shock.

5. Never install the camera in areas exposed to oil, gas or solvents.

Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.

6. Cleaning

For cameras with interchangeable lenses, do not touch the surface of the sensor directly with the hands. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and the camera lens. Use a damp soft cloth to remove any dirt from the camera body. Please do not use complex solvents, corrosive or abrasive agents for cleaning of any part of the camera.

7. Do not operate the camera beyond the specified temperature, humidity or power

source ratings. This camera is suitable for indoor operation only. Use the camera at temperatures within -10ºC ~ +50 ºC (14

℉~122℉) and humidity between 20% and 80%.

This device is not rated as submersible. The input power source is 12VDC / 24VAC.

8. Mounting

Use care in selecting a solid mounting surface which will support the weight of the camera plus any wind, snow, ice or other loading, and securely attach the camera to the mounting surface using screws and anchors which will properly support the camera. If necessary (e.g. when mounting to drop ceilings) use a safety wire to provide additional support for the camera.

Table of Contents

Product Overview……………………………………………….....……………..1

Main Features……………………………..……………..…….…………………2

Content List……………………………………………………………………… 2

Specifications………………………………………………………….…………. 3

Dimensions…………………………………………………………………….…. 4

Installation……………………………………………………….………………...4

OSD Menu…………………………………………………………………………5

Product Overview

Get incredible low light sensitivity and the resolution listed in the specs from the actual camera you install. The EverFocus Ultra Series EQ700 uses the Sony Exview HAD II 960H CCD to produce in excess of 720 horizontal TV lines of resolution from each and every Ultra Series

720+ camera we deliver (megapixel lenses are recommended to take full advantage of the amazing resolution available from this advanced imaging technology). Combine this with an almost unbelievable useable native Ultra low light sensitivity of 0.0001 lux without using digital

1

slow shutter this camera truly provides color without compromise: over 720TVL resolution, plus your choice of full motion color or true day/night images in ultra low light with guaranteed

ZERO ghosting and Digital Wide Dynamic Range to handle the most challenging of bright or unbalanced scene lighting conditions. The EQ700 offers complete flexibility for selection of lens field of view, electronic or DC iris, wide choices for housing styles and mounting configurations, dual voltage operation and a full suite of OSD Menu and DSP functions controllable at the camera (DNR to save DVR HDD space, privacy masking, mirroring, and much more) This is the camera that you have been waiting for to create analog CCTV systems that produce astounding

image clarity in the widest range of applications and in almost any light level.

FEATURES

• Ultra resolution of over 720 horizontal TV lines for astounding image quality

• Exview HAD II sensor delivers amazing ultra high sensitivity of .0001 lux - 500X better native light sensitivity without DSS low light boost - Zero Ghosting guaranteed

• Color without compromise: your choice of full motion color or true day/night images in low light without ghosting

• True Day/Night with ICR module

• Adaptive Tone Curve Reproduction (ATR)/Digital Wide Dynamic Range expansion to deliver properly exposed images despite unbalanced lighting in the scene

• Provides 2D-Noise Reduction to improve picture clarity while enabling DVRs to improve disk storage utilization

• Accepts C/CS mount manual or DC iris lenses

• Easy to use OSD setup menu

• Motion detection for 4 configurable zones

• Privacy mask function for 4 configurable zones

• Dual voltage (12VDC/24VAC) with Anti-Crawl for stability even without line lock

Box Contents

Camera

This User Guide

C-mount lens adapter ring

AI lens plug (for connecting lenses not already equipped with a plug)

2

SPECIFICATIONS

Imaging Device

Video Format

Picture Elements

Effective Picture Elements

Horizontal Resolution

Sensitivity

S/N Ratio

Video Output

Gamma Correction

Lens Type

Back Light Compensation

Auto Gain Control

Electronic Shutter

White Balance

Sync. Mode

Day & Night

OSD Menu

OSD Languages

2D-DNR

Adaptive Tone Curve Reproduction/

Digital WDR (ATR)

Mirror

Motion Detection

Privacy Mask

Power Source

Power Consumption

Operating Temperature

Storage Temperature

Humidity

Dimensions

Weight

Certifications

1/3" Sony Exview HAD II 960H High Sensitivity Interline CCD

NTSC –or- PAL (separate models)

NTSC: 1020(H)x508(V) PAL:1020(H)x596(V)

NTSC: 976(H) x 494(V) PAL:976(H) x 582(V)

More than 720 TVL from production cameras

Color ~.001 lux, B/W ~ 0.0001Lux/F=1.0 (Zero ghosting guaranteed)

Over 50dB (AGC off)

BNC 1.0V p-p 75Ω,

0.45

C/CS Mount (lens sold separately; megapixel lenses recommended for maximum image clarity)

OFF/BLC/HSBLC Selectable

Low light auto, Bright light auto, Manual selectable

1/60 ~1/100,000 sec.

ATW/One Push/User1/User2/Anti-Crawl/Manul/Push Lock

Internal (plus Anti-Chroma Crawl White Balance option above)

True D/N with motorized IR cut filter; Choose Color, B/W, Auto

Multiple functions

English, Spanish, Portuguese, German,

Russian, Japanese, Chinese, French

On/Off (level adjustable)

On/Off (3 levels each adjustable for luminance and contrast)

Off/On

Off/On for 4 selectable zones (On screen indication on alarm)

Off/On for 4 selectable zones

12VDC/24VAC

12VDC:180mA (2.16W) max. / 24VAC:2.9W max.

14°F~122°F ; -10°C~50°C

-4°F~140°F ; -20°C~60°C

Less than 80% non condensing

2.28” x 2.28” x 4.765” / 58mm x 58mm x 121mm (includes BNC at rear)

~.88 lb/~400g

CE / FCC

3

DIMENSIONS

INSTALLATION

Warning

•

To prevent electrical shock, turn off the electrical power before making electrical connections.

1.

Choose an appropriate mounting location which allows the desired field of view without obstructions. Select and attach a suitable lens. If a C-mount type lens you

MUST attach the C- to CS-mount adapter ring between the lens and the camera. If a DC iris lens, attach the lens control wire to the jack on the side of the camera.

2.

Insure that the mounting surface will support the weight of the camera, mount, and any (optional) housing used to protect the camera. Add a safety wire if needed.

3.

Attach mount (see instructions provided with mount) and if a housing is used install camera into housing.

4.

Attach camera (or housing) to mount.

5.

Attach power and video coax BNC to camera.

6.

Press MENU button and adjust OSD menu settings to suit application.

4

OSD MENU

5

6

EverFocus Electronics Corp.

Corporate Headquarter:

12F, No.79 Sec. 1 Shin-Tai Wu Road,

Hsi-Chih, Taipei, Taiwan

TEL: +886-2-26982334

FAX: +886-2-26982380 www.everfocus.com.tw [email protected]

China Office:

Room 609, Technology Trade Building,

Shangdi Information Industry Base,

Haidian District, Beijing, China 100085

TEL: +86-10-62973336~39

FAX: +86-10-62971423 www.everfocus.com.cn [email protected]

U.S.A - California Office:

1801 Highland Avenue Units A & B

Duarte, CA 91010

TEL: +1-626-844-8888

FAX: +1-626-844-8838 www.everfocus.com [email protected]

U.S.A - New York Office:

415 Oser Avenue Unit S

Happauge, NY 11788

TEL: +1-631-436-5070

FAX: +1-631-436-5027 www.everfocus.com [email protected]

Europe - Germany Office:

Albert-Einstein-Strasse 1,

D-46446 Emmerich, Germany

TEL: +49-2822-93940

FAX: +49-2822-939495 www.everfocus.de [email protected]

India Office:

Suite 803, Housefin Bhavan, C-21,

Bandra Kurla Complex, Bandra (East),

Mumbai 400051. India.

TEL: +91-22-6128-8700

FAX: +91-22-6128-8705 www.everfocus.in

Japan Office:

5F Kinshicho city Building,

2-13-4 Koto-Bashi,

Sumida-Ku, Tokyo, 130-0022 Japan

TEL: +81-3-5625-8188

FAX: +81-3-5625-8189 www.everfocus.co.jp [email protected]

UK Office:

Unit 12 Spitfire Business Park

Hawker Road

Croydon, CR0 4WD

London: 0845 430 9999

Telford: 0845 430 8888

Fax: 020 8649 9907 [email protected]

Your EverFocus product is designed and manufactured with high quality materials and components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

Please, dispose of this equipment at your local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic product.

Please, help us to conserve the environment we live in!

Ihr EverFocus Produkt wurde entwickelt und hergestellt mit qualitativ hochwertigen

Materialien und Komponenten, die recycelt und wieder verwendet werden können.

Dieses Symbol bedeutet, dass elektrische und elektronische Geräte am Ende ihrer

Nutzungsdauer vom Hausmüll getrennt entsorgt werden sollen.

Bitte entsorgen Sie dieses Gerät bei Ihrer

örtlichen kommunalen Sammelstelle oder im

Recycling Centre.

Helfen Sie uns bitte, die Umwelt zu erhalten, in der wir leben

!

7