Emerson CF775AW02 Owner`s manual

READ AND SAVE THESE INSTRUCTIONS
Model No.
CF775AW02
CF775BS02
CF775ORB02
Net Weight:
23.6 Lbs.
SPANISH BAY™
Ceiling Fan Owner's Manual
LIMITED WARRANTY
What The Warranty Covers:
This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in workmanship and materials.
You must be the original purchaser or user of the product to be covered.
What The Period Of Coverage Is:
As it applies to the motor, this warranty will last for a lifetime of your ceiling fan. All other components and accessories are
covered by this warranty for one year from the date you purchased your ceiling fan. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, MADE WITH RESPECT TO COMPONENTS AND ACCESSORIES IS ALSO LIMITED TO ONE YEAR.
What Will Emerson Electric Co. Do To Correct Problems:
Emerson Electric Co. will replace a defective Emerson Air Comfort Ceiling Fan motor, blade, component or other accessory at no charge to you. If repair of
the motor or blades is not practical or possible within a reasonable time and no replacement can be provided, Emerson will refund the actual purchase price
of your fan. WE WILL SHIP THE REPAIRED PRODUCT OR REPLACEMENT TO YOU AT NO CHARGE, BUT YOU ARE RESPONSIBLE FOR ALL COSTS OR
REMOVAL, REINSTALLATION AND SHIPPING OF THE PRODUCT TO EMERSON ELECTRIC CO.
How Can You Get Service:
YOU MUST HAVE PROOF OF YOUR PURCHASE OF THE CEILING FAN TO OBTAIN LIMITED WARRANTY SERVICE. KEEP YOUR RECEIPT OR OTHER PROOF
OF PURCHASE. You can return the product to our factory or to your nearest authorized service center.
• To return the product to the factory, obtain a return authorization and service identification tag by writing to Air Comfort Products, Division of Emerson
Electric Co., 8100 W. Florissant Ave., St. Louis, MO 63136. Include all model numbers shown on the product with your request.
• To return the product to an authorized service center, call 1-800-654-3545 for the address of the nearest authorized service center.
You will be responsible for all insurance, freight or other transportation charges to our factory or authorized service center. Your Emerson Air Comfort
Ceiling Fan should be properly packed to avoid damage in transit since we will not be responsible for any such damage.
What Is Not Covered:
The glass globes and light bulbs of your ceiling fan are not covered by this warranty. This warranty also does not cover any defects, malfunctions or failures
caused by:
• Repairs by persons not authorized by Emerson Electric Co.,
• Use of parts or accessories not authorized by Emerson Electric Co.,
• Mishandling, improper installation, modifications or damage to your ceiling fan while in your possession, or
• Unreasonable use, misuse, abuse, including failing to do reasonable and necessary maintenance, and normal wear and tear.
Additionally, this warranty and any implied warranty of merchantability or fitness for a particular purpose are voided when:
• The original purchaser or user ceases to own the product, or
• The fan is moved from its original point of installation.
This warranty is only valid within the 50 states of the United States and the District of Columbia. No other written or oral warranties apply, and no employee,
agent, dealer or other person is authorized to give any warranties on behalf of Emerson Electric Co.
REPAIR, REPLACEMENT OR A REFUND ARE THE EXCLUSIVE REMEDIES AVAILABLE UNDER THIS WARRANTY AND EMERSON IS NOT RESPONSIBLE
FOR DAMAGES OF ANY KIND, INCLUDING INCIDENTAL AND CONSEQUENTIAL DAMAGES. Incidental damages include but are not limited to such damages
as loss of time and loss of use. Consequential damages include but are not limited to the cost of repairing or replacing other property which was damaged if
this product does not work properly.
How State Law Relates To The Warranty:
Some states do not allow the exclusion or limitation of incidental or consequential damages so the above exclusion or limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Part No. F40BP73620001
Form No. BP7362-1
U.L. Model No.: CF775
!
WARNING
WARNING: To avoid fire, shock, and serious personal injury, follow these instructions.
Safety Instructions
1. Read your owner’s manual carefully and keep it for future reference.
2. Before servicing or cleaning unit, switch power off at service panel and lock service panel
disconnecting means to prevent power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the
service panel.
3. Be careful of the fan and blades when cleaning, painting, or working near the fan. Always turn off
the power to the ceiling fan before servicing.
4. Do not put anything into the fan blades while they are turning.
5. Do not operate reversing switch until fan blades have come to a complete stop.
Additional Safety Instructions for Installation
1. To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and do not
operate fan without blades.
2. All wiring must be in accordance with the National Electrical Codes “ANSI/NFPA 70-1999” and
Local Electrical Codes. Use the National Electrical Code if Local Codes do not exist. The ceiling
fan must be grounded as a precaution against possible electrical shock. Electrical installation
should be made or approved by a licensed electrician.
3. The outlet box and joist must be securely mounted and capable of reliably supporting at least
50 pounds. Use only U.L. outlet boxes listed as “Acceptable for Fan Support”, and use the mounting screws provided with the outlet box. Most outlet boxes commonly used for support of light
fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified
electrician if in doubt.
4. The downrod furnished with the fan provides the minimum recommended floor to fan blade
clearance for an 8 foot ceiling.
5. The fan must be mounted with the fan blades at least 7 feet from the floor to prevent accidental
contact with the fan blades.
6. Follow the recommended instructions for the proper method of wiring your ceiling fan. If you do
not know enough about electrical wiring, have your fan installed by a licensed electrician.
WARNING: To avoid fire, shock or injury, do not use an Emerson or any other brand of control not
specifically approved for this fan.
WARNING: This product is designed to use only those parts supplied with this product and/or any
accessories designated specifically for use with this product by Emerson Electric Co. Substitution
of parts or accessories not designated for use with this product by Emerson Electric Co. could
result in personal injury or property damage.
WARNING: To reduce the risk of personal injury, do not bend the blade flange when installing the
blade flanges, balancing the blades or cleaning the fan. Do not insert foreign objects in between
rotating fan blades.
WARNING: To reduce the risk of electrical shock, this fan must be installed with an isolating
wall control/switch.
DATE CODE:
The date code of this fan may be found on
the box, stamped in ink on a white label.
You should record this data above and keep
it in a safe place for future use.
2
U.L. Model No.: CF775
This Manual Is Designed to Make it as Easy as Possible for You to
Assemble, Install, Operate and Maintain Your Ceiling Fan
Tools Needed for Assembly
One Phillips head screwdriver One stepladder
One 1/4” blade screwdriver
One wire stripper
One 5/16” open end wrench or pliers
Three wire connectors (supplied)
MATERIALS
Wiring outlet box and box connectors must be of type
required by the local code. The minimum wire would
be a 3-conductor (2-wire with ground) of following
size:
Installed Wire Length
Up to 50 ft.
50-100 ft.
!
Wire Size A.W.G.
14
12
WARNING
Before assembly your ceiling fan, refer to section on
proper method of wiring your fan (page 6). If you feel
you do not have enough wiring knowledge or experience, have your fan installed by a licensed electrician.
Unpacking Instructions
For your convenience, check-off boxes are provided next to each step. As each step is completed, place a check mark in the box. This will insure that all steps have been completed
and will be helpful in finding your place should you be interrupted.
!
WARNING
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
1-800-654-3545
!
WARNING
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson could result in personal injury or
property damage.
1. Check to see that you have received the following
parts:
NOTE: If you are uncertain of part description,
refer to exploded view illustration.
a. Fan motor assembly
b. One switch housing assembly
c. Five fan blades
d. One ceiling cover
e. Five blade flanges
f. One hanger ball/downrod assembly
g. One hanger bracket
h. One coupling cover
i. One light fitter
j. One glass bowl
k. Three 60-watt (max.) candelabra bulbs
l. One loose parts bag containing:
1. Sixteen M5 x 6 slotted Phillips washer
head blade screws
2. One M6 x 14 flange screw with
lockwasher
3. Two wood pendants
4. Three wire connectors
5. Two threaded studs
6. Two lockwashers
7. Two knurled knobs
3
8. One clevis pin
9. One hairpin clip
10. Two couplings
11. Sixteen blade washers
NOTE: Place the parts from the loose parts bags
in a small container to keep them from being lost.
If any parts are missing, contact your local
retailer or catalog outlet for replacement before
proceeding.
2. Remove the fan assembly from the protective
plastic bag. Place the fan assembly into the upper
foam pad with the top of the motor facing up.
The upper foam pad serves as a holder for the fan
during the first stages of assembly.
C. FAN
BLADES
I. LIGHT
FITTER
UPPER
FOAM
PAD
PROTECTIVE
PLASTIC BAG
A. FAN MOTOR
ASSEMBLY
J. GLASS
BOWL
E. BLADE
FLANGES
B. SWITCH
HOUSING
ASSEMBLY
G. HANGER
BRACKET
D. CEILING
COVER
F. HANGER BALL/
DOWNROD ASSEMBLY
L. LOOSE PARTS
BAG
H. COUPLING
COVER
CARTON
LOWER
FOAM PAD
K. THREE 60-WATT
CANDELABRA BULBS
U.L. Model No.: CF775
How to Put Your Ceiling Fan Together
1. Remove the hanger ball by loosening the setscrew
in the hanger ball until the ball falls freely down the
downrod (Figure 1). Remove the pin from the
downrod, then remove the hanger ball. Retain the
pin and hanger ball for reinstallation in step 5.
4. Make sure the grommet is properly installed in the
coupling cover, then slide the coupling cover on the
downrod until it rests on the motor housing. Place
the ceiling cover over the downrod. Be sure that
the ceiling cover and the coupling cover are both
oriented correctly (Figure 3).
PIN
HANGER
BALL
CEILING
COVER
DOWNROD
SETSCREW
DOWNROD
GROMMET
Figure 1
COUPLING COVER
2. Loosen the two setscrews in the motor coupling
and separate, untwist and unkink the three 80”
motor leads. Route the motor lead wires through
the downrod. Align the clevis pin holes in the downrod with the holes in the motor coupling. Install the
clevis pin and secure with the hairpin clip (Figure
2). The clevis pin must go through the holes in the
motor coupling and the holes in the downrod. Be
sure to push the straight leg of the hairpin clip
through the hole near the end of the clevis pin until
the curved portion of the hairpin clip snaps around
the clevis pin. The hairpin clip must be properly
installed to prevent the clevis pin from working
loose. Pull on the downrod to make sure the clevis
pin is properly installed.
Figure 3
5. Reinstall the hanger ball (Figure 4) on the downrod
as follows. Route the three 80” motor leads through
the hanger ball. Position the pin through the two
holes in the downrod and align the hanger ball so
the pin is captured in the groove in the top of the
hanger ball. Pull the hanger ball up tight against the
pin and securely tighten the setscrew in the hanger
ball. A loose setscrew could create fan wobble.
WARNING
!
It is critical that the clevis pin in the motor coupling
is properly installed and the setscrew securely tightened. Failure to verify that the pin and setscrew are
properly installed (as shown in Figure 2) could result
in the fan falling.
!
WARNING
It is critical that the pin in the hanger ball is properly
installed and the setscrew securely tightened.
Failure to verify that the pin and setscrew are properly installed could result in the fan falling.
MOTOR
COUPLING
M5 x 10
SETSCREW
CLEVIS PIN
JAM NUT
MOTOR
COUPLING
CLEVIS
PIN
PIN
HAIRPIN
CLIP
HANGER
BALL
DOWNROD
HAIRPIN CLIP
M5 x 10
SETSCREW
DOWNROD
SETSCREW
Figure 4
Figure 2
6. The fan comes with blue, black and white leads
that are 80-inches long. Before installing the fan,
measure up approximately 6 to 9-inches above top
of hanger ball/downrod assembly. Cut off excess
leads and strip back insulation 1/2-inch from end of
leads.
3. While pulling up on the downrod, securely tighten
the two setscrews in the motor coupling.
4
U.L. Model No.: CF775
7. Mount blade flanges to fan blades using three
M5 x 6 slotted Phillips washer head blade screws
and three blade washers (Figure 5).
!
9. Rotate the motor hub until the flange screw hole is
visible through the slot in the switch housing plate.
Attach the blade assembly to the motor hub using
the two M6 x 14 flange screws preassembled in
flange. Make sure the screws are tightened
securely (Figure 6). Repeat this procedure for the
other four blade assemblies.
WARNING
To reduce the risk of personal injury, do not bend the
blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not
insert foreign objects in between rotating fan blades.
PREASSEMBLED
M6 x 14 FLANGE
SCREWS (2)
(INSTALL
THROUGH SLOT
IN SWITCH
HOUSING PLATE)
M5 x 6 SLOTTED PHILLIPS
WASHER HEAD BLADE
SCREW (3)
SWITCH HOUSING
PLATE
BLADE WASHER (3)
BLADE FLANGE
FAN BLADE
Figure 5
8. Turn the fan assembly upside down in preparation
for mounting the fan blade assemblies.
NOTE: Take care not to scratch fan housing when
installing blades.
BLADE FLANGE
MOTOR HUB
Figure 6
Installing The Light Fitter And Glass
1. Remove the center plug screw from the switch
housing assembly (Figure 7). Remove and retain
the two wire connectors.
MOTOR CONNECTOR
SWITCH HOUSING PLATE
SWITCH HOUSING
CONNECTOR
BLACK WIRE
SCREWS
SWITCH CUP
CONNECTOR
WIRE
CONNECTORS
BLUE WIRE
HEX NUT
SCREWS
WHITE WIRES
LOCKWASHER
FAN SWITCH
CHAIN
SWITCH
HOUSING ASSEMBLY
SWITCH
CUP
LIGHT FITTER
METAL SAFETY
CAP
CENTER PLUG SCREW
Figure 7
OUTER BOWL
CAP
2. Remove and retain the lockwasher and nut from
the light fitter. Insert the black and white wires from
the light fitter through the center hole in the switch
housing assembly. Thread the switch housing
assembly onto the light fitter. Reinstall the lockwasher and nut and tighten securely (Figure 8).
HEX
NUT
Figure 8
4. Engage the connector of the switch housing
assembly with the motor connector (Figure 9). The
two connectors are keyed and color-coded and
must be mated correctly (color-to-color) before they
can be engaged. Make sure the connector latch
closes properly.
5. Carefully tuck all wires and splices into the switch
housing.
3. Connect the white wire from the ceiling fan to the
white wire of the light fitter. Connect the blue wire
from the ceiling fan to the black wire of the light fitter. Use wire connectors (previously removed) to
make connections (Figure 8).
5
U.L. Model No.: CF775
SWITCH
HOUSING
ASSEMBLY
!
WARNING
To avoid possible fire hazard, do not exceed wattage
indicated on the fitter.
FAN SWITCH
CHAIN
LIGHT FITTER
SWITCH HOUSING
CONNECTOR
MOTOR CONNECTOR
Figure 9
BOWL CAP
THREADED NIPPLE
6. Remove the three switch housing screws from the
switch housing plate. Position the switch housing
assembly on the switch housing plate and align
the holes in the switch housing assembly with the
holes in the plate. Secure the switch housing
assembly by installing the three screws
(Figure 10).
METAL SAFETY
CAP
OUTER BOWL
CAP
60-WATT
CANDELABRA
BASE BULBS (3)
HEX
NUT
GLASS
BOWL
FINIAL NUT
!
WARNING
LIGHT SWITCH
CHAIN
Do not pinch wires between the switch housing
assembly and the switch housing plate.
PENDANTS (2)
Figure 11
10. Position the glass bowl over the threaded nipple.
Slide the metal safety cap onto the threaded
nipple and gently tighten the hex nut to secure
the glass bowl and metal safety cap. Set the bowl
cap over the metal safety cap and against the
glass bowl. Pass the fan pull chain through the
bushing in the outer bowl cap and install the cap
on the threaded nipple. Install finial nut finger
tight (Figure 11).
LIGHT FITTER
SWITCH HOUSING
ASSEMBLY
MOUNTING
SCREWS (3)
CAUTION
Be sure that the fan switch chain does not make
contact with the light bulbs. If necessary
reposition the light fitter to avoid the fan switch
chain from touching the light bulbs.
11. Install pendants onto light fixture chain and fan
switch chain using couplings provided.
Figure 10
NOTE: It is advisable to periodically check the
tightness of the finial.
7. Install three 60-watt (maximum) candelabra base
light bulbs (included) into the light fitter sockets
(Figure 11).
!
12. You have now completed the assembly of your
new ceiling fan. You can now proceed with
hanging and wiring your fan.
WARNING
Over lamping the fan will result in the light
bulbs being automatically shut off. Use only
60-watt maximum candelabra light bulbs. Turn
off the electricity before replacing the light
bulbs.
8. Remove the finial nut, hex nut, metal safety cap,
and outer bowl cap from the light fitter (Figure 11).
9. Pass the fan switch chain through the bushing in
the bowl cap (Figure 11).
6
U.L. Model No.: CF775
Electrical Requirements
Your new ceiling fan will require a grounded electrical
supply line of 120 volts AC, 60 Hz, 15 amp circuit.
!
The outlet box must be securely anchored and capable of withstanding a load of at least 50 pounds.
If your fan is to replace an existing ceiling light fixture,
turn electricity off at the main fuse box at this time and
remove the existing light fixture.
WARNING
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked “Acceptable
for Fan Support”, and use screws supplied with
outlet box. Most outlet boxes commonly used for
support of light fixtures are not acceptable for fan
support and may need to be replaced. Consult a
qualified electrician if in doubt.
!
WARNING
To avoid fire or shock, follow all wiring instructions
carefully.
Any electrical work not described in these
instructions should be done or approved by a
licensed electrician.
How to Hang Your Ceiling Fan
!
OUTLET
BOX
WARNING
The fan must be hung with at least 7' of clearance
from floor to blades (Figure 12).
CEILING
TWO SCREWS
SUPPLIED WITH
OUTLET BOX
HANGER
BRACKET
Figure 13
TAB
Figure 2
AT LEAST
7'
NOTE: CEILING COVER,
SUPPLY WIRES AND
FAN WIRES OMITTED
FOR CLARITY.
Figure 12
OUTLET
BOX
FLOOR
!
WARNING
HANGER
BRACKET
The outlet box and joist must be securely mounted
and capable of supporting at least 50 lbs. Use only a
U.L. outlet box listed as “Acceptable for Fan
Support”.
!
!
WARNING
WARNING
To avoid possible fire or shock, do not pinch wires
between the hanger ball/downrod assembly and
hanger bracket.
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked “Acceptable
for Fan Support”, and use screws supplied with
outlet box. Most outlet boxes commonly used for
support of light fixtures are not acceptable for fan
support and may need to be replaced. Consult a
qualified electrician if in doubt.
2. Carefully lift the fan and seat the hanger ball/
downrod assembly on the hanger bracket that was
just attached to the outlet box (Figure 14). Be sure
the groove in the ball is lined up with tab on the
hanger bracket (Figure 13).
1. Securely attach the hanger bracket to the outlet
box using the two screws supplied with the outlet
box. (Figure 13.)
!
HANGER BALL/
DOWNROD ASSEMBLY
Figure 14
!
WARNING
Failure to seat tab in groove could cause damage to
electrical wires and possible shock or fire hazard.
WARNING
Hanger bracket must seat firmly against outlet box. If
the outlet box is recessed, remove wall board until
bracket contacts box. If bracket and/or outlet box are
not securely attached, the fan could wobble or fall.
7
U.L. Model No.: CF775
How to Wire Your Ceiling Fan
If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
!
!
WARNING
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before wiring.
NOTE: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice, as it
must be grounded for safe operation.
3. Screw the two threaded studs (supplied) into the
tapped holes in the hanger bracket.
4. Lift the ceiling cover up to the threaded studs and
turn until studs protrude through the holes in the
ceiling cover (Figure 16).
1. Connect the green grounding lead from the hanger
ball and the green grounding lead from the hanger
bracket to the grounding conductor of supply (this
may be a bare wire or wire with green colored
insulation). Securely connect wires with wire connectors supplied. (Figure 15.)
!
5. Secure the ceiling cover in place by sliding lockwashers over the threaded studs and installing the
two knurled knobs (supplied). (Figure 16.) Tighten
the knurled knobs securely until the ceiling cover
fits snugly against the ceiling and the hole in the
ceiling cover is clear of the downrod. Your fan is
now wired to be turned on and off from the fan
switch.
WARNING
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by
Emerson Electric Co. could result in personal injury
or property damage.
CEILING COVER
2. Securely connect the fan motor white wire to the
supply white (neutral) wire using wire connector
supplied (Figure 15). Securely connect the fan
motor black wire and blue wire to the supply black
(hot) wire using wire connector supplied
(Figure 15). After connections have been made,
turn leads upward and carefully push leads into the
outlet box, with the white and green leads on one
side of the outlet box and the black and blue leads
on the other side of the outlet box.
GROUND
WIRE
WHITE SUPPLY
(NEUTRAL)
GREEN WIRE
(GROUND) FROM
HANGER BRACKET
WHITE FAN
WIRE
Figure 4
Figure 16
!
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
6. Connect the wood ball with chain to the 3-speed
switch pull chain.
LISTED
WIRE
CONNECTOR (3)
Figure 15
LOCKWASHERS (2)
THREADED STUD
KNURLED KNOB
BLACK AND BLUE
FAN WIRES
GREEN WIRE
(GROUND) FROM
HANGER BALL
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
BLACK SUPPLY
(HOT)
NOTE: CEILING COVER
OMITTED FOR CLARITY.
8
U.L. Model No.: CF775
Using Your Ceiling Fan
Maintenance
1. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box.
2. Check the operation of the fan by gently pulling on
the pull chain switch.
3. All fans are shipped from the factory with the
reversing switch positioned to the “left” circulate air
downward. If airflow is desired in opposite
direction, turn your fan OFF and wait for the blades
to stop turning, then slide the reversing switch to
the “right” position, and turn fan on again.
4. The fan blades will turn in the opposite direction
and reverse the airflow.
Your fan model is equipped with a 4-position,
3-speed pull chain switch. The operating sequence
is as follows:
IMPORTANT CARE INSTRUCTIONS
for your Ceiling Fan
Three-Speed
1st Pull—HIGH
2nd Pull—Medium
3rd Pull—Low
4th Pull—OFF
When cleaning, use only a soft brush or lint free cloth
to avoid scratching the finish.
Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish.
!
WARNING
Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of an electrical shock.
Accessories
REVERSING
SWITCH
1. Ceiling Fan Light Kits (see store or catalog).
2. Ceiling Fan/Light Controls (see store or catalog).
3. Downrod Extension Kits (see store or catalog).
LIGHT PULL
CHAIN SWITCH
Season
Summer
Winter
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
SPEED CONTROL
PULL CHAIN SWITCH
!
WARNING
The use of any other control not specifically
approved for this fan could result in fire, shock and
personal injury.
Reverse Switch Information
Rotation Direction
Switch Position
Counter-Clockwise
Left
Clockwise
Right
!
WARNING
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal
injury or property damage.
9
U.L. Model No.: CF775
!
WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER
BEFORE TROUBLE SHOOTING YOUR FAN.
Trouble Shooting
TROUBLE
1. Fan will not start.
PROBABLE CAUSE
1. Fuse or circuit breaker blown.
2. Loose power line connections to the fan, or loose
switch wire connections in the switch housing.
SUGGESTED REMEDY
1. Check main and branch circuit fuses or circuit breakers.
2. Check line wire connections to fan and switch wire
connections in the switch housing.
WARNING: Make sure main power is turned off.
3. Reversing switch in neutral position.
3. Make sure reversing switch position is all the way to one side.
1. Blades not attached to fan.
2. Screws securing fan blade flanges to motor
are loose.
3. Wire connectors inside switch housing rattling.
1. Attach blades to fan before operating.
2. Check to make sure the screws which attach the fan flanges to the
motor are tight.
3. Check to make sure wire connectors in switch housing are not
rattling against each other or against the interior wall of the switch
housing.
WARNING: Make sure main power is turned off.
4. Some fan motors are sensitive to signals from Solid-State variable
speed controls. If Solid-State Control is used and motor noise
results choose an alternative control method.
5. Tighten screws securely.
!
2. Fan sounds noisy.
!
4. Motor noise caused by solid-state variable
speed control.
5. Screws holding blades to flanges are loose.
3. Fan wobbles
excessively.
1. Setscrew and jam nut in motor coupling are not
tightened securely.
2. Setscrew in the hanger ball/downrod assembly is
loose.
3. Screws securing fan blade flanges to motor are loose.
4. Fan blade flanges not seated properly.
5. Hanger bracket and/or ceiling outlet box is not
securely fastened
6. Fan blades out of balance.
10
1. Raise coupling cover and tighten setscrew and jam nut securely.
2. Tighten the setscrew in the hanger ball/downrod assembly.
3. Check to be sure screws which attach the fan blade flanges to the
motor are tight.
4. Check to be sure the fan blade flanges seat firmly and uniformly to
the surface of the motor. If flanges are seated incorrectly, loosen
the flange screws and retighten according to the procedure in the
section on "How to Put Your Ceiling Fan Together".
5. Tighten the hanger bracket screws to the outlet box, and/or secure
outlet box.
6. Interchanging an adjacent (side-by-side) blade pair can redistribute
the weight and result in smoother operation.
U.L. Model No.: CF775
Repair Parts
2
1
3
5
6
4
7
8
9
11
10
21
18
22
12
19 14
24
23
17
13
20
16
13
20
15
Before discarding packaging material, be certain all parts have been removed.
HOW TO ORDER REPAIR PARTS
WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:
• PART NUMBER
• PART DESCRIPTION
• NAME OF ITEM
• MODEL NUMBER
The model number of your Fan will be found on a label attached to the top housing.
For repair parts, phone 1-800-654-3545.
11
U.L. Model No.: CF775
Repair Parts Listing
Model Numbers
Key
No.
CF775AW02
CF775BS02
CF775ORB02
760750-41
760750-24
760750-48
1
2
3
Hanger Ball Assembly,
Consisting of:
Hanger Bracket
Hanger Ball
Downrod
—
—
—
—
—
—
—
—
—
*
4
5
7
Parts Bag Containing:
Wire Connector (3)
Threaded Stud (2)
Lockwasher (2)
763364
—
—
—
763364-1
—
—
—
763364-2
—
—
—
8
10
Knurled Knob (2)
Pin, Clevis
—
—
—
—
—
—
11
13
15
Clip, Hairpin
Wood Pendant (2)
Screw, M6 x 14 (1)
—
—
—
—
—
—
—
—
—
18
Screw, M5 x 6 Washer
19
Head Blade (16)
Blade Washer (16)
—
—
—
—
—
—
20
Coupling (2)
—
—
—
6
9
12
Ceiling Canopy
Coupling Cover
Wiring Harness
761504-16
762463-5
762993-3
761504-12
762463-8
762993-2
761504-20
762463-16
762993-1
14
16
17
Switch Housing
Flange (set of 5)
Blade (set of 5)
762999-3
762996-3
761930-20
762999-1
762996-1
761930-21
762999-5
762996-5
761930-22
21
Light Fitter
763523-AW
763523-BS
763523-ORB
22
Glass Bowl
763524
763524
763524-1
23
Finial Nut
762892-2
762892-3
762892-6
24
Outer Bowl Cap
763526-AW
763526-BS
763526-ORB
—
Owner's Manual
BP7362-1
BP7362-1
BP7362-1
*
Description
Air Comfort Products
DIVISION OF EMERSON ELECTRIC CO.
8100 W. Florissant • St. Louis, MO 63136
Part No. F40BP73620001
Printed in China 02/09
Form No. BP7362-1
U.L. Model No.: CF775