Sharp | R-140B | User manual | Pipe & drain inspection / cleaning

8

Pipe & drain inspection / cleaning

Pipe & drain TV inspection systems

Accessories for pipe TV inspection systems

Drain cleaning

Pipe & drain cleaning

Industrial pipe & drain cleaning

Accessories for drain cleaning

Spiral drive unit CENTER-LOCK

Drain-cleaning cables

Cables and tool sets

Drain-cleaning equipment

High-pressure drain cleaning

Pipe & drain cleaning nozzles

Accessories for high-pressure drain cleaning

202 – 204

205 – 206

207 – 211

212 – 213

214 – 215

216 – 217

218

219 – 220

221 – 222

223 – 227

228 – 232

233 – 234

235

200

www.rothenberger.com

ROTHENBERGER offers perfect combinations of drain cleaning and inspection technology from a single source. Whether manual drain cleaning equipment, mechanical sectional/drum machines, or modern high-pressure cleaners – practically every conceivable drain obstruction can be removed with ROTHENBERGER.

The ROTHENBERGER drain-cleaning product range is supplemented by a comprehensive assortment of cables and accessories.

Our professional equipment range for drain cleaning is rounded off by the ROTHENBERGER TV inspection system, which enables the user to inspect, locate, and document damage and obstructions in drains or hollow spaces.

8

201

Pipe & drain TV inspection systems

ROCAM

®

mobile

Drain TV inspection camera with Duo-Power in b/w

For hollow spaces and drains of 50 to 150 mm dia.

Camera head 33 mm dia.

Push cable

Push cable length

4,5 mm dia.

36 m

Performance features

●

●

●

●

●

●

●

Excellent manoeuvrability, thanks to movable camera head

One-man, single-handed device

Easy maintenance

Continuously adjustable brightness of LEDs

Integrated stowage compartment

Battery charge indicator

Duo-Power: Mains operation 100–240 V / 50–60 Hz or 18 V battery

● Monitor cover acts as glare shield:

Optimum image recognition

8

● On-board battery charger with charge status indicator:

Cost-saving

● Simple disconnection of battery supply:

Conserves the battery for a long service life

● Impact-resistant, splash proof ABS housing:

For rough use on building sites

● Guide skids:

Centred camera guidance in the pipe

Reinforced push cable

- 3

.8 m

● Digital metering readout:

Permits the precise position to be determined

● Video In / Video Out:

Video recording and video playback

● Rugged tubular frame:

Balanced carrying position and secure standing

● Pinhole lens, LED illumination:

Brilliant image quality for fault-free diagnosis

New, scratch-resistant sapphire lens New union nut with edge protection Optional metering counter

-3.8 m

Versions

ROCAM

®

ROCAM

®

ROCAM

®

mobile b/w basic

mobile b/w with metering counter

mobile b/w with metering counter and locator kg

13.0

13.4

14.5

No.

6.9420

6.9425

6.9430

Contents: Rocam

®

, including 2 guide skids (No. H8.2306), mains adapter (No. H8.8952), Scart cable (No.H8.2307)

202

Pipe & drain TV inspection system

ROCAM

®

mobile

Drain TV inspection camera with Duo-Power in colour

For hollow spaces and drains of 50 to 150 mm dia.

Camera head 33 mm dia.

Push cable

Push cable length

4,5 mm dia.

36 m

NEW

● New colour monitor:

35 % larger, with even better image resolution

● Camera head with sapphire lens, and impact protection:

Robust and hard wearing


●

●

●

●

●

●

●

Excellent manoeuvrability, thanks to movable camera head

One-man, single-handed device

Easy maintenance

Continuously adjustable brightness of LEDs

Integrated stowage compartment

Battery charge indicator

Duo-Power: Mains operation 100–240 V / 50–60 Hz or 18 V battery

● Monitor cover acts as glare shield:

Optimum image recognition

● On-board battery charger with charge status indicator:

Cost-saving

● Simple disconnection of battery supply:

Conserves the battery for a long service life

● Impact-resistant, splash proof ABS housing:

For rough use on building sites

● Guide skids:

Centred camera guidance in the pipe

7.6

m

● Digital metering readout:

Permits the precise position to be determined

● Video In / Video Out:

Video recording and video playback

● Rugged tubular frame:

Balanced carrying position and secure standing

● CMOS lens, LED illumination:

Brilliant image quality for fault-free diagnosis

8

Reinforced push cable New, scratch-resistant sapphire lens New union nut with edge protection Optional metering counter

Contents: Rocam

®

, including 2 guide skids (No. H8.2306), mains adapter (No. H8.8952), Scart cable (No.H8.2307)

7.6 m

Versions

ROCAM

®

ROCAM

®

ROCAM

®

mobile colour basic

mobile colour with metering counter

mobile colour with metering counter and locator kg No.

12.5

6.9520

13.0

6.9525

14.1

6.9530

203

Pipe & drain TV inspection system b/w

Mobile, ready-to-use TV inspection system for costeffective inspection and damage analysis of pipes, drains, and other hollow spaces. Ideally suited also for inspections after drain cleaning, and for acceptance tests of new installations.

6.9410

6.9420

+ metering counter

6.9425

-3.8 m


+ locator

-3.8 m

6.9430

colour


6.9525

7.6 m

6.9520


+ locator

7.6 m

6.9530

8

Mini module Locator retrofit kit

Guide ball Push rod Reserve battery Battery charger USB video adapter

Camera head b/w

Camera head colour

6.9300 b/w

6.9350 colour

Features counter

1.9260 b/w

1.9270 colour

Benefit

7.4628

Battery operation

18 V/1,4 Ah on-board battery charger

2,5 h working with battery power

Battery status indicator battery is charged during mainspowered operation

Battery capacity always in view

ABS housing Impact, break, and weather resistant

36 m push cable Sufficient for 1 or 2-family house

Readout of metering counter

Active position location for precise distance assessment pin-point determination through steel and concrete

6.9420

●

●

●

●

●

Optional / retrofit

Locator

Mini Module

USB video adapter

Push rod (30 m)

Guide ball

Rapid charger

Reserve battery

24 V/1,4 Ah

Technical data:

Video input:

Video output:

Current demand:

Ambient temperature:

Storage temperature:

Housing:

Weight:

Dimensions: retrofitting of precision locator

Inspection in pipe diameters of

DN 40 - 100

Direct recording with PC support for large distances always centered in the pipe run for external battery charging extension of battery-powered operating time

BNC 1 K

Ω

BNC 75

Ω

650 mA

-10 to +50 °C

-30 to +50 °C impact-resistant ABS

13 kg

510 x 415 x 365 mm (L x H x W)

●

●

●

●

●

●

●

7.4619

6.9550

6.9555

6.9560

6.9401

6.9501

Rocam b/w

Rocam b/w

Rocam b/w

+ metering counter + metering counter

+ locator

Rocam colour

Rocam colour

Rocam colour

+ metering counter + metering

+ locator

6.9425

●

●

●

●

●

●

6.9430

●

●

●

●

●

●

●

6.9520

●

●

●

●

●

6.9525

●

●

●

●

●

●

6.9530

●

●

●

●

●

●

●

●

●

●

●

●

●

●

Monitor:

Camera module b/w:

Camera module colour:

Camera head:

Inspection diameter:

Push cable length:

Push cable:

Diode illumination:

Battery voltage:

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

● b/w = 5,5”, colour = 6,4”

Type CCIR b/w, PAL or NTSC

Type CMOS colour, PAL or NTSC

33 mm dia.

50 to 150 mm

36 m

4.5 mm dia.

14 LEDs

24 V – 1.00 A

●

●

●

●

●

●

204

Accessories for pipe TV inspection system

ROCAM

®

locator / retrofitting set

The locating system consists of a transmitter and a receiver. The detection frequency is 512 or 640 Hz, and can also be used for other receiving equipment. The location is indicated acoustically and visually.

● Retrofitting set available for all ROCAM

Expandable fitments

® versions:

●

●

●

Active location in the camera head:

No external power supply

Transmitter fitted in camera head:

Unlimited manoeuvrability in bends

Precise location detection in the pipe:

Pin-pointed repair of damage

Versions g No.

Locator retrofitting set, b/w

Locator retrofitting set, colour

950 1.9260

1.9270

ROCAM

®

camera head b/w or colour

● Camera heads in colour and b/w:

Exchangeable modules

● Camera head, colour and b/w:

Brilliant image resolution, very sharp pictures

●

●

●

Automatic lighting control:

No need for constant readjustment

Camera head 33 mm dia.:

High manoeuvrability in bends

Sapphire lens with edge protection:

Very robust and hard wearing

Versions g No.

Camera head, b/w

Camera head, colour

Camera head, b/w with transmitter

Camera head, colour with transmitter

280

280

295

295

6.9401

6.9501

6.9402

6.9502

ROCAM

®

guide ball / guide skid

Guide ball

●

●

External diameter 70 mm: for centring the camera head in the pipe

In combination with the push rod: perfect complement

● Optimum illumination and increased field of vision in large pipes

Guide skid:

● Skid fingers can be trimmed:

● fast and simple adaptation to the specified pipe diameter

Mounting without tools: fast application when required

Versions

Guide ball 33.5 mm

Guide skid: g

100

8

No.

7.4628

H8.2306

ROCAM

®

USB video adapter

Analog/digital converter for recording on laptop or PC

● Optional accessories:

For retrofitting to all ROCAM ® models

● Video recording possible:

Fast and simple data storage

Versions

USB video adapter g

300

No.

6.9560

No. 6.9401

No. 7.4628

No. 6.9501

No. H8.2306

8

205

8

Accessories for pipe TV inspection system

No. 6.9550

No. 6.9555

ROCAM

®

MINI MODULE

In combination with the ROCAM ® , the ROTHENBERGER Mini Module is a perfect match. First-class inspection in pipes of 40 – 100 mm diameter, with excellent manoeuvrability in 90° bends.

● Retrofittable and compatible with all ROCAM ® models:

Colour or b/w, as well as PAL or NTSC

● Flattened camera head, 25 mm dia., with push cable 3.5 mm dia.

and 5 m long:

Ideal for small pipe diameters

● Lighting ring with 12 white LEDs:

Optimum illumination in pipe systems

Versions

MINI MODULE b/w

MINI MODULE colour g

780

780

No.

6.9300

6.9350

ROCAM

®

push rod

● Push cable with 6 mm diameter and 30 m length:

Ideal supplement for ROCAM ®

● Use as supplementary push cable:

Reliable guidance in large-diameter pipes

● Use only with ROCAM ® guide ball:

Thus also serves as a centring aid

Version

Push rod kg

4.5

Battery and charging unit for ROCAM

®

mobile

Battery 24 V/1,4 Ah - NiCd

● Reserve battery prolongs battery-powered operating time

● Battery is mounted with click mechanism:

Secured against falling out

Charging unit 24 V

● External charging option:

More flexible use

Version

Battery 24V / 1,4 Ah - NiCd

Charging unit 24 V g

800

750

No.

7.4619

No.

6.9550

6.9555

Metering counter info box

(not retrofittable)

● Digital metering count is displayed continuously on the monitor

● Zero-setting button as an extra feature

● Determines the location of pipe damage

7.6 m

206

ROPUMP

® SUPER

Professional force pump cleaner

● Patented piston sealing:

Dual-sided sealing, specially-formed seal for more suction

Drain cleaning

No. 7.2071

● Compact, robust construction:

Highly loadable, and easy to handle

No. 7.2072

No. 7.2070

Versions g

ROPUMP

®

SUPER compl. with adapter 2,300

Adapter, long 780

Adapter, short 180

No.

7.2070

7.2071

7.2072

ROPUMP

®

Force pump cleaner uses the air pump principle with water pressure

Clears obstructions in drains of wash basins, showers, bathtubs, etc.

● Swivelling cup:

Flexible suction adapter

● Supplied with rubber adapter, short and long:

Fast clearance of obstructions in pipes and drains of wash basins, WC, bathtubs, etc.

Description / Version

ROPUMP with swivelling cup g

500

No.

7.1991

POWER CLEANER

● Environmentally compatible cleaning with pleasant lemon smell:

●

Safe and simple application, TÜV-tested, chemical- free

Numerous application areas, such as wash basins, bathtubs, toilets, showers, and floor drains:

Competitively priced and very fast

● Precise-fitting, high-quality rubber adapter, two-sided use:

Long service life and complete sealing of drain openings

Version

Can and adapter g

635

No.

7.0630

NEW

207

8

Drain cleaning

WC-BLITZ toilet auger

● Continuously extendable, with tough cleaning auger up to

1.8 m length

For use in hard-to-get-to places

● Angle of plastic

No damage to ceramic surfaces

● Two tools integrated in one snake:

Dual cleaning effect in a single working operation

8

208

No. 7.1995

Additional tools with 16 mm coupling are described on pages

224 — 227.

Version

WC CLEANER, complete with snake

Spare snake, 1/2” 12.7 mm x 1.7 m kg No.

2.75

7.8550

1.3

7.2713

Manual drain cleaning unit Type 3 S

For obstructions in pipes of 40 - 100 mm diameter

● Plastic Snake drum:

Corrosion-proof and impact-resistant

● Snake, 13 mm dia. x 15 m, with 16 mm coupling

The entire range of ROTHENBERGER drain cleaning tools with 16 mm couplings can be used

● Unit with stand

Keeps both hands free for easy and convenient working

Contents: Manual drain cleaning unit Type 3 S (No. 7.2003),

Cross-blade cutter 35 mm dia. (No. 7.2176), and Separating pin

(No. 7.2100)

Description / Version kg No.

Manual drain cleaning unit Type 3 S, complete 17.50

7.2003

Spare snake, 13 mm dia. x 15 m long 7.00

7.2016

Cross-blade cutter, 35 mm dia.

0.04

7.2176

Separating pin 0.01

7.2100

ROSPI H+E

Manual and electric drain cleaning unit

For crank operation, and with hexagon drive for conventional power drills

● Snake locking with flexible cable and integrated bulb auger:

●

Removes contamination from hard-to-get-to places

Impact-resistant, closed snake container:

●

Break-proof and protects from dirt

Working in tight bends:

No need to dismantle sink strainers or siphons

Description

ROSPI 6 H+E

ROSPI 8 H+E

ROSPI 8 H+E

ROSPI 10 H+E

Snake dia.

mm

6.4

8.0

8.0

10.0

Snake length m

4.5

4.5

7.5

10.0

kg

1.8

2.4

3.3

4.8

No.

7.1990

7.1997

7.1995

7.2000

ROSPI R 36

Electrical drain cleaning unit, standard version

Electric drive 230 V / 630 W, double insulated, continuous speed adjustment from 0 – 850 rpm in both directions

● Usable with snake diameters of 8 and 10 mm

●

●

Snakes 8 mm dia. x 7.5 m long with integrated bulb auger

Pipe diameters 20 – 75 mm:

Ideal for small jobs in the kitchen, bathroom, or WC up to a length of 9 m

● Snake container of plastic:

Corrosion protected


ROSPI R 36 standard version kg

4.7

No.

7.2521

ROSPI R 36

Battery-powered drain cleaning unit

with battery and charging unit 230 V/14.4 V, approx. 1 h working time, rapid charge time 1 h with overcharge protection, double insulated, continuous speed adjustment from 0 – 700 rpm in both directions:

● Usable with snake diameters of 8 and 10 mm

● Snakes 8 mm dia. x 7.5 m long with integrated bulb auger

● Pipe diameters 20 – 75 mm:

Ideal for small jobs in the kitchen, bathroom, or WC up to a length of 9 m

● Snake container of plastic:

Corrosion protected


ROSPI R 36 battery-powered version

Replacement high-power battery

Battery charging unit kg

6.6

0.7

1.0

No.

7.2500

7.2504

7.2507

UNIFLEX N 30

Pipe & drain cleaning machine for 30 - 75 mm dia.

● Electric drive with 600 W:

●

Powerful removal of tough blockages:

Automatic forwards/reverse snake feed:

●

Time-saving

Large plastic container for snake:

Corrosion-proof, impact and break-resistant

Automatic snake feed

Drain cleaning

8

Description

UNIFLEX N 30 automatic kg

8.1

230 V / 50 Hz

7.8575

209

Drain cleaning

8

● Safety gloves

● Blade cutter:

Ideal for removing soft deposits

● Separating pin:

Fast release of tools from the cable

● Crank with 16 mm cable coupling:

For rotating the cable

● ROPOWER PROFILE CABLE without plastic core:

50% more cleaning power, and improved bend manoeuvrability

ROPOWER HANDY

Manual drain cleaning unit

The universal manual drain cleaning unit for fast clearance of obstructions in pipes of 50 – 100 mm diameter. The cable permits the entire range of ROTHENBERGER pipe cleaning tools with 16 mm couplings to be used

● Patented cable with special wire shape:

Perfect cleaning effect with incrustations, and high torsional strength

● Galvanized ROPOWER profiled cable:

●

Leach-resistant and weather proof

Cable coupling:

Extendable working length

● Standard bulb auger tool:

High flexibility for clearing light textile & paper obstructions

● Drop-head auger:

Ideal for particularly tight pipe bends, branches, and drain downpipes

● Coupling:

Suitable for connecting all 16 mm

ROTHENBERGER drain cleaning tools

Set consisting of: ROPOWER PROFILE CABLE, 2.3 m without core,

(No. 7.2494), Manual crank (No. 7.1976), Safety gloves (No. H8.1401),

Separating pin (No. 7.2100), Blade cutter 25 mm dia. (No. 7.2169)

Description

ROPOWER HANDY, complete

Manual crank

ROPOWER PROFILE CABLE without core

No.

kg

1.7

7.1975

0.4

7.1976

1.2

7.2494

Cables and tools for UNIFLEX N 30

● With round plug-in coupling, 3/8” – 10 mm dia.

● Sharktooth cutter:

For clearing grease deposits, and for cutting up rags and other material

● Special steel, with integrated bulb auger (except No. 7.2421):

Close-wound wire, 2 mm diameter, easy working also in tight pipe bends

Description

Bulb auger

Drop-head auger

Sharktooth cutter dia.

mm

25

24

34

L mm

85

80

43

Working range mm

30 – 75

30 – 75

40 – 75 g No.

70 7.2759

70 7.2768

50 7.2742

Cables and couplings

Spare snake, 3/8” x 10.5 m long

Spare cable coupling 3/8”, positive

Spare cable coupling 3/8”, negative

No.

g

4,340 7.2716

10 7.2736

10 7.2737

Cables for ROSPI H+E and R 36

● Drain cleaning cable 8 mm:

Enters directly through sink strainers, crosses, and drains without having to disassemble the drain or stench trap dia.

mm

L m

R/K

Type

Steel core

Used for

ROSPI

6.4

8

8

8

4.5

4.5

7.5

–

C 1

7.5

C 1 - IC X

–

–

R 6

R 8 – R 36

R 8 – R 36

R 8 – R 36

8

8

10.0

10.0

–

–

–

X

R 8 – R 36

R 10 – R 36

10 10.0

C 5 – R 10 – R 36 with 16 mm T-groove quick coupling

10 7.5

C 4 – R 10 – R 36 kg No.

0.8

7.2522

1.1

7.2409

1.8

7.2412

2.3

7.2413

2.4

7.2414

3.0

7.2415

3.5

7.2422

2.9

7.2421

210

Drain cleaning

R 550

Drain cleaning machine

For installation and maintenance work in hospitals and municipal facilities

Drain-cleaning cables:

With direct take-up:

With adapter magazine:

For pipes:

Maximum working length:

16 mm dia.

8 and 10 mm dia.

20 – 100 mm dia.

40 m with 16 mm dia. S-cables

10 m with 10 mm dia. cables


Motor

●

●

Rating: 0,25 kW (0,34 HP), RH and LH drive

Speed: 583 rpm

● Die-cast aluminium frame:

Distortion-resistant and extremely light

● Your problem solver for every obstruction:

Comprehensive range of special ROTHENBERGER accessories available

● All high-performance ROTHENBERGER drain-cleaning cables can be coupled to each other:

Suitable for all R 550-R140 B drain-cleaning machines, and fitted with safety couplings

● Particularly light, compact, and handy design:

Ideal for general purpose maintenance work on baths, wash basins, toilets, in kitchens, waste pipes, drains, and downpipes

Functional design

● Reinforced guide hose sheathing with precision quick coupling:

Ensures safe, kink-free cable feed, and prevents dirt ingress

●

●

Convenient machine weight of only 16 kg

Tripod stand:

Safe, non-slip support for convenient, upright working, e.g. when toilets and inspection holes (available as accessory)

● Drive lever can be locked in stop position:

Very robust, and also serves as carrying handle for the machine

● Side panels of glass-fiber reinforced polyamide:

Robust and light

● Clamping device:

For secure lengthening/shortening of the cable

● Patented CENTER-LOCK cable clutch system:

For user benefits, see page 218

Drive lever locked in stop position – serves as carrying handle

Manual feed is done by means of a working loop

Adapter magazine for 8 and 10 mm cables

Interference suppression and splashwater proof to IP 44

8

Description version kg

230 V 110 /115 V

50 Hz 50 Hz

R 550 16.0

7.2655 7.2863

R 550 with accessories 29.0

7.9890X

–

Cable & tool set consisting of: 5 x cable 16 mm

(No. 7.2427), Cable basket (No. 7.2110), Guide hose

(No. 7.2540), Guiding glove (No. 7.2120), Separating pin

(No. 7.2100), Straight auger (No. 7.2161), Bulb auger

(No. 7.2163), Blade cutter (No. 7.2170)

Accessories for R 550 kg

Guide hose FS 16 / Length: 2 m 1.1

Adapter magazine for 8 and 10 mm cables, empty 1.3

Spare R 550 clutch jaws with springs 0.1

Tripod stand, collapsible 3.0

No.

7.2540

7.2511

7.2538

5.8182

211

8




R 600

For obstructions in pipes of 20 - 150 mm diameter




For pipes:


22 and 16 mm dia.

8 and 10 mm dia.

20 – 150 mm dia.





Motor

● Rating: 0.4 kW (0.55 HP), RH and LH drive

● Speed: 467 rpm





R 650





For pipes:


22 and 16 mm dia.

8 and 10 mm dia.

20 – 150 mm dia.



Motor

● Rating: 0.8 kW (1.1 HP), RH and LH drive

● Speed: 623 rpm

● Excellently suited for rough use and in extreme working conditions, especially quiet operation and powerful cleaning action, even when cutting through roots or grinding out cement and lime deposits

R 750




With clutch jaws:

For pipes:


32 and 22 mm dia.

8, 10, and 16 mm dia.

20 – 200 mm dia.






Motor

● Powerful 0.9 kW (1.23 HP) motor

● Speed: 467 rpm

● Excellently suited for continuous use, also in extreme working conditions, especially quiet operation and powerful cleaning action

212


R 600

Drain cleaning machine

For installation and maintenance work in hospitals and municipal facilities






For secure lengthening/shortening of the cable

● Patented clamping jaw system:

Safe and powerful transmission to the cleaning cable



Description version

R 600 kg

230 V 110/115 V

50 Hz 50 Hz

20.9

7.2665

7.2869


7.2675

7.2676

Cable & tool set consisting of: 5 x cables 22 mm dia.




(No. 7.2263), Spade head cutter (No. 7.2261), Funnel auger

(No. 7.2222), Sharktooth cutter (No. 7.2250)

R 650

Powerful pipe & drain cleaning machine

For professional, mobile pipe cleaning. Compact, robust, and powerful action, also with tough contaminations.

Accessories for R 600

Guide hose FS 22 / Length: 4 m

Adapter magazine for 8 mm cables, empty


Spare R 600 clutch jaws 0,3

Tripod stand, collapsible

No.

kg

2.8

7.2541

1.8

7.2514

1.8

7.2515

7.2638

3.0

5.8182










For secure lengthening/shortening of the cable Description version

R 650 kg

230 V 110/115 V

50 Hz 50 Hz

22.8

7.2670

7.2870


7.2680

7.2890

Cable & tool set consisting of: 5 x cables 22 mm dia.




(No. 7.2263), Spade head cutter (No. 7.2261), Retrieving auger

(No. 7.2222), Sharktooth cutter (No. 7.2250)





Spare clutch jaws


No.

kg

2.8

7.2541

1.8

7.2514

1.8

7.2515

0.3

7.2638

3,0 5.8182

8

R 750

Powerful pipe & drain cleaning machine

For professional drain cleaning. Compact, robust, and powerful action, also with tough contaminations. Perfectly suited for cleaning domestic drains and mains, as well as demanding work such as chain-spinning, grinding out or root cutting







● Transport wheels, and clamping device for cables:

Secure, firm stand, and convenient lengthening/shortening



Description version kg

230 V 110/115 V

50 Hz 50 Hz

R 750 33.5

7.2910 7.2911



Clutch jaws for 8 and 10 mm cables

Clutch jaws for 16 mm cables

Spare R 750 clutch jaws for 22/32 mm cables


No.

kg

4.1

7.2559

0.4

7.2914

0.3

7.2915

0.4

7.2563

3.0

5.8182

213


Industrial pipe & drain cleaning machines

R 80, R 100 SP, and R 140 B

For continuous industrial operation in pipe and drain cleaning work, and for drain reconditioning

Ideal for use in private households, industrial pipe networks, municipal facilities, maintenance services, hotels, hospitals, for main pipes, industrial pipes, sewers, roof drainage, etc.

R 80

For drain cleaning cables

For pipes

Maximum working length

22 and 32 mm dia.

50 – 250 mm dia.



● Rating: 1.4 kW (1.9 HP)

Extremely powerful, highly loadable, and suitable continuous industrial use

● Tubular steel frame with side panels of glass-fiber reinforced polyamide:

Rugged, foldable, corrosion-protected and removable handles & wheels

● Operation of the clutch jaws:

Safe, radial clamping, optimum force transmission, functional safety, simple replacement

● Reinforced guide hose sheathing with precision quick coupling:

Ensures safe, kink-free cable feed, and prevents dirt ingress

● Professional one-man machines:

Small, compact dimensions permit the machine to pass through doors and staircases, functional and robust design, extremely narrow, portable and mobile with large wheels

Performance features of this professional one-man machine

●

●

●

●

●

●

●

●

●

●

●

●

●

Functional and robust design with compact dimensions

Portable and mobile

Extra narrow, goes through doorways

Transports easily in any automobile

Large wheels make stair climbing easy

Ideal for inspection manholes through defined working height

Two-sided working possible

Fatigue-free clamping when working with large cable diameters and lengths

Corrosion-protected, strong tubular steel frame

Collapsible

Removable handles and wheels

Side panels of glass-fiber reinforced polyamide to protect the machine

Integrated, spacious toolbox

●

●

●

Motor

Powerful

Rating: 1.4 kW (1.9 HP)

RH / LH rotation

Contents: Grease gun (No. 855156), Allen keys (1 x No.321515,1 x No. 321188,

1 x No. 321189), Open-ended spanners (1 x No.310411, 1 x No. 310450)

Description version

R 80 kg

230 V 110/115 V

50 Hz 50 Hz

52.0

7.2585 7.2857

8

R 100 SP


For pipes


22 and 32 mm dia.

50 – 250 mm dia.



Performance features of this professional one-man machine

●

●

●

●

●

●

●

●

●

●

●

Smallest dimensions

Fits through 800 mm dia. manholes

Ideal for tight spaces such as skylights or ducts

Portable and mobile

Strong, corrosion-protected frame

2 adjustable working heights

Front part folds downwards

Supporting feet extendable at left & right

Rear bracket can be pulled downwards or to the rear

Firm, safe stand

Transports easily in any automobile

Motor

●

●

●

Powerful

Rating: 1.4 kW (1.9 HP)

RH / LH rotation

Contents: Grease gun (No. 855156), Allen keys (No. 321515), Open-ended spanners

(No. 310450)

Description

R 100 SP kg

230 V 110/115 V

50 Hz 50 Hz

57.0

7.2610 7.2860

Accessories for R 80 / R 100 SP kg

Guide hose FS 32 / Length: 4 m 4.1

Spare R 80 / 100 clutch jaws for 22 mm cables 0.4

Spare R 80 / 100 clutch jaws for 32 mm cables 0.3

No.

7.2559

7.2561

7.2562

214

R 140 B

For municipal and industrial applications


For pipes:

Maximum working length

32 mm dia.

100 – 600 mm dia.


140 m with rods

Engine

●

●

Rating: 4,8 kW (6,6 HP), RH and LH drive

Speed: 160 – 600 rpm



●

●

Machine can be used for rodding or cable cleaning

Extremely powerful reversible drive

●

●

●

●

●

●

●

1 forward and 1 reverse gear

Manual slip clutch

Working range from 100 – 250 mm dia., with 32 mm cables

Working range from 150 – 600 mm dia., with rods

With quick-change couplings for rodding tools

Independent from electric power supply

Effortless conversion from cable to rodding operation

● Guide hose:

Protects against damage and contamination

● Integrated toolbox:

Ample space for further accessories

● Integrated parking brake

Secure stand of the machine

● 2-state reversing drive, RH / LH rotation:

Changing the direction of rotation with rods or cables; speed is controlled by means of a manual throttle

● 4 pneumatic transport wheels:

Optimum manoeuvrability of the machine

● Powerful 6.6 HP petrol engine:

Ideal for rodding work in cross-country pipes

Working with cables Working with rods

Description kg

R 140 97.0

No.

7.2970


7.2971

25 x adapter 3/4” (No. 7.8581), 1 x funnel auger 3/4”

(No. 7.8585), 1 x Screw auger 3/4” (No. 7.8583), 1 x Straight auger 3/4”(No. 7.8582), 1 x Guiding glove, left

(No. 7.2120), 1 x Guiding glove, right (No. 7.2121), 1 x

Separating pin (No. 7.2101)


Adapter 3/4”, dia. 6 mm, 1.5 metres

Funnel auger 3/4”250

Screw auger 3/4”

Straight auger 3/4”

Rod turning grip

Bulb auger

Retrieving auger

Spiral sawtooth auger

Guiding glove, left

Guiding glove, right

Separating pin

Tool adapter for mounting cable tools

Dual Spade head cutter, Length 90 mm – dia. 45 mm

Serrated forked cutter, length 110 mm – dia. 60 mm

Serrated forked cutter, length 110 mm – dia. 85 mm

Serrated forked head, length 110 mm – dia. 112 mm

Tool adapter for mounting rods


ROPOWER 32 mm set

Standard 32 mm set

SMK 32 mm set g

250

150

210

210

20

100

250

250

560

380

100

120

100

120

7.2780

7.2781

140 7.2782

3,750 H 9.9120

4,100 7.2559

7.2954

7.2962

7.2964

No.

7.8581

7.8585

7.8583

7.8582

7.8580

7.2771

7.2772

7.2747

7.2120

7.2121

7.2101

7.2122

7.2774

8

215


8

No. 7.2538

No. 7.2536

No. 7.2638

No. 7.2666

No. 7.2563

No. 7.2915

No. 7.2541

No. 7.2511

No. 7.2559

Ideal working height

Clutch jaws

for machine Type

R 550

(from Serial No. 411542)

(up to Serial No. 411541) for cables

16 mm

16 mm

R 600/650

(from Serial No. 409001) 16 and 22 mm

(up to Serial No. 409000) 16 and 22 mm

R 750

R 80/100

R 80/100

22 and 32 mm

22 mm

32 mm

Clutch jaws for R 750

for machine Type

R 750

R 750 for cables

8 and 10 mm

16 mm kg No.

0.1

0.1

7.2538

7.2536

0.3

0.3

7.2638

7.2666

0.4 7.2563

0.4

7.2561

0.3

7.2562

kg

0.4

0.3

No.

7.2914

7.2915

Adapter magazines

● Impact-resistant container with clutch jaws and precision clutch:

Clean, safe storage of 8 and 10 mm cables for machine Type

R 550

R 600/650

R 600/650 for cables max. cable length

8 and 10 mm

8 mm

10 mm

10 m

10 m

10 m kg No.

1.3

7.2511

1.8

7.2514

1.8

7.2515

Cable guide hoses

● Prevention of contamination and damage

Description

FS 16

FS 22

FS 32 for for

Machine Type Cables max.

Length

R 550

R 600/650

R 750/80/100

16 mm 2 m

22 mm 4 m

32 mm 4 m kg No.

1.1

7.2540

2.8

7.2541

4.1

7.2559

Toilet protection hose

● Protects the ceramic surfaces

● With adjustable mounting bracket for cables

8, 10, and 16 mm dia.

Length

540 mm kg

0.4

No.

7.2705

Tripod stand:

● Provides an ideal working height of drain cleaning machines for toilets

● Inspection holes in downpipes

● For cable haul-back device

● Collapsible

● Galvanised suitable for machine Type

R 550 – R 600 – R 650 – R 750 kg

3.0

No.

5.8182

216


Cable haul-back device

● Safe lowering/raising of cables in downpipes

●

●

●

●

●

Suitable for all 22 or 32 mm dia. cables with open windings

Also suitable as pusher unit for difficult obstructions

Also suitable as adapter for third-party equipment without problems

With water supply connection (two 1” threaded couplings)

Socket for tripod stand


Cable haul-back device

Telescoping guide tubes

Version Extended length m Type for cables with 16, 22 mm dia.

1.4 – 2.3

for cables with 22, 32 mm dia.

1.9 – 4.3

2 parts 3.0

3 parts 10.0 kg No.

7.2130

7.2131

Cable guiding gloves

● For safe grasping and guiding of cleaning cables kg No.

3.7

7.2135

● For safe cable guidance in manholes and manhole covers

No twisting

● Full leather with short cuff:

●

Robust and comfortable

Inner glove surface studded with metal slip rivets

Operator safety


Guiding glove, left

Guiding glove, right g No.

210 7.2120

210 7.2121

ROWONAL preserving and rust removing solution

● Preservation of cables, couplings, and tools

Version Contents g

Spray can

Plastic canister

Manual sprayer, empty

200 ml

5.0 l

0.5 l

No.

220 7.2142

5,100 7.2140

90 7.2141

Separating pin

● For uncoupling cables & cable tools

Version for cables & tools with 16 mm dia.

for cables & tools with 22 and 32 mm dia.

Cable baskets

● Safe storage combined with convenient transport

● Excellently suited for cleaning and preservation g No.

20 7.2100

30 7.2101

●

●

For cleaning, rust-removal, disinfection

Spray can contents are CFC-free

No. 7.2140

No. 7.2100

No. 7.2101

No. 7.2111

No. 7.2131

No. 7.2121

No. 7.2142

No. 7.2120

No. 7.2112

Version Cable length max. m for cables with 16 mm dia.

34.5

for cables with 22 mm dia.

22.5

for cables with 22, 32 mm dia.

18.0

kg No.

1.3

7.2110

1.6

7.2112

2.3

7.2111

No. 7.2110

8

217

Cable drive unit CENTER-LOCK

CENTER-LOCK cable drive

Patented, centred power transmission direct to the drive shaft

● Drive shaft is mounted in twin ball bearings with permanent lubrication.

Extremely smooth rotation, and maintenance-free

● Safe force transmission via radial clamping with patented clutch jaws:

Exceptionally good force transmission and safe operation

● Direct connection of cables with diameters of 8, 10, 16, 22, and 32 mm for working in pipes up to 200 mm diameter — smaller diameters are held by suitable clutch jaws:

Individual and flexible working range

● Low-friction toothed belt and toothed drive pinion:

Full motor power is available, no slipping of drive shaft

8

ROPOWER Profile Cable

Patented cable with special galvanized wire shape:

Intended for extreme cleaning operations in large-diameter pipes, preferably used over large distances and straight sewer or pipe runs

Cable features

● Suitable for all other cables with 16 mm couplings

● Temperature and leach-resistant, weatherproof, and with red plastic core

● High torsional strength

Stabilised by a temperature and weather-resistant plastic core

Increased cleaning effect supplements the cable tool action

● Simultaneous action of cable and tool:

Dual cleaning effect

Profiled spiral cable removes incrustations dia. mm dia. inches

16

22

32

5/8”

7/8”

1.1/4”

L m

2.3

4.5

4.5

218

Leach resistant

No.

kg

1.3

7.2490

4.7

7.2492

8.3

7.2493


ROTHENBERGER high-performance drain cleaning cables

With safety coupling, suitable for ROTHENBERGER drain cleaning machines R 550 to R 140 B

For other makes of drain cleaning machines with cable diameters of

16 mm – 5/8”, 22 mm – 7/8” and 32 mm – 1.1/4”


● Manufactured of quality spring steel Type C-DIN 17223, material no. 1.1200

● Specially hardened and tempered:

Maximum spring tension with high elasticity and flexibility, abrasion-resistant, low wear

● For extreme loading in continuous operation

● Closely wound:

For high torque transmission, and to prevent entanglement during transport

● 16 mm, 22 mm, and 32 mm cables are wound left-handed:

Increasing cable stiffness when machine turns clockwise, and depending on the resistance of the obstruction

● Both cable ends are fitted with generously dimensioned connection windings:

For professional exchange of couplings

● Couplings cannot loosen

● Surface-ground cable ends:

To ensure strong, non-loosening linkage between cable and coupling

● T-groove safety coupling system with locking pressure pin:

Quick and simple extension and shortening of cables, for fitting / removing drain cleaning tools, and for powerful torque transmission

● High-quality construction: Spring mounted stainless steel pressure pin with stainless steel spring:

Ensures operational safety even during long periods of continual use, due to reduced danger of corrosion and breakage, and prevents loss of cables and tools in pipes

● Bevelled lead-ins on the cable couplings:

Quick, trouble-free coupling, also when wearing gloves

● Working with reducers and extensions:

Saves costs when coupling cables with different diameters

Cable ends surface ground to ensure strong linkage between cable and coupling

Close-fitting couplings for powerful torque transmission

T-groove safety coupling with bevelled lead-ins for easy coupling

Spring mounted stainless steel pressure pin with stainless spring

Reducing / Extension pieces for cables

Description

Extension piece

Reducing piece

Extension piece

Reducing piece negative positive

16 mm 22 mm

22 mm 16 mm

22 mm 32 mm

32 mm 22 mm g No.

140 7.2461

150 7.2460

320 7.2463

330 7.2462

Cable couplings

Type g 16 mm

5/8” for standard and SMK cables positive 20 7.2150

negative 20 7.2151

for S and S-SMK cables positive 20 7.2152

g

40

40

40

22 mm

7/8” g 32 mm

7/8”

7.2210

100 7.2310

7.2211

100 7.2311

7.2212

100 7.2312

Within limits, tools with larger or smaller lead-ins can also be adapted.

Extension piece

No. 7.2461

For repairing broken cables for standard and SMK cables

No. 7.2150

No. 7.2151

Reducing piece

No. 7.2460

for S and S-SMK cables

No. 7.2212

No. 7.2213

219

8


8

With integrated bulb auger (except 7.2421), simple working also with tight pipe bends, direct entry through sink strainers, crosses, and drains, particularly with 8 mm cables, without having to disassemble the drain or stench trap.

No. 7.2412

No. 7.2414

No. 7.2422

No. 7.2421

● Easy operation, also with tight bends or a succession of pipe bends

●

●

No clogging of cable with debris

Higher strength and stiffness than the standard cable.

● Higher stiffness and twisting resistance, suitable for demanding work and longer distances, for example root cutting, grinding out, and chain spinning

Cables 8 mm / 10 mm

Suitable for ROSPI manual and electrically-powered drain cleaning devices by means of adapters or clutch jaws, as well as for drain cleaning machines R 550 to R 570. Closely-wound special steel with 2 mm diameter wire.

dia. mm dia. inches

L m

8

8

5/16”

5/16”

7.5

7.5

8

8

5/16”

5/16”

10.0

10.0

10 3/8” 10.0

with 16 mm cable coupling

10 3/8” 7.5

Steel core

–

X

–

–

X

–

R/K

Type

C 1

C 1 – IC

–

–

C 5

C 4

No.

kg

1.82

7.2412

2.25

7.2413

2.35

7.2414

3.00 7.2415

3.48

7.2422

2.85

7.2421

Standard cables

● Flexible

● For general-purpose cleaning work with normal loading and short distances dia. mm dia. inches

L m

Wire size dia. mm

R/K

Type kg

No.

16

22

32

5/8”

7/8”

1.1/4”

2.3

4.5

4.5

3.0

4.5

5.0

C 8

C 10

C 11

1.05

7.2431

3.98

7.2441

6.29

7.2451

SMK cables

With black plastic core

● Temperature resistant and weatherproof dia. mm dia. inches

L m

Wire size dia. mm

R/K

Type

16

22

32

5/8”

7/8”

1.1/4”

2.3

4.5

4.5

3.0

C 8-NIC

4.5

C 10-NIC

5.0

C 11-NIC

No.

kg

1.24

7.2433

4.64

7.2442

7.63

7.2452

S cables

● Higher strength and better torque transmission due to increased wire diameter dia. mm dia. inches

L m

Wire size dia. mm

R/K

Type kg

No.

16

22

32

5/8”

7/8”

2.0

4.5

1.1/4” 4.0

3.5

5.0

6.0

–

–

C 14

3.00

7.2428

4.18

7.2443

6.80

7.2453

S–SMK cables

With red plastic core

Same as S cables, but with additional temperature-resistant and weatherproof red plastic core, intended for extreme cleaning operations in large-diameter pipes, preferably used over long distances and straight sewer or pipe runs dia. mm

16

22

32 dia. inches

L m

5/8”

7/8”

2.3

4.5

1.1/4” 4.5

Wire size dia. mm

3.5

5.0

6.0

R/K

Type

–

–

–

No.

kg

1.30

7.2435

4.78

7.2444

7.85

7.2455

220


R 550

Cable & tool sets

Set No. 7.2946

No. 7.2431

No. 7.2110

No. 5.5016

No. 7.2511

No. 7.2109

No. 7.2414

No. 7.2142

No. 7.2169

No. 7.2120

No. 7.2163

No. 7.2100

No. 7.2161

Set 7.2946 for standard 16 — 8 mm, consisting of:

Contents as for standard 16 mm, but additionally with adapter magazine for 8 mm cables (No. 7.2511), 1 Standard cable dia.

8 mm / 10 m (No. 7.2414), Cable basket for 8 mm cables (No. 7.2109)

Description Versions kg No.

RO-POWER 16 mm with profile cables 13.5

7.2951

Standard 16 with standard cables 12.0

7.2945

SMK 16 mm with SMK cables 13.0

7.2947

Standard 16 – 8 mm with standard cables 16.1

7.2946

RO-POWER 16 – 8 mm with profile cables 16.6

7.2952

No. 7.2547

Set 7.2946 for standard 16 mm, consisting of:

Plastic case (No. 5.5016), Guiding hose FS 16 / 4.0 m (No. 7.2547),

Blade auger dia. 16 / 25 mm (No. 7.2169), 5 x cables dia. 16 mm / 2.3

m (No. 7.2431), Cable basket for 16 mm cables (No. 7.2110),

ROWONAL cable spray (No. 7.2142), Straight auger dia. 16 / 16 mm

(No. 7.2161), Separating pin 16 mm (No. 7.2100), Bulb auger dia.

16 / 28 mm (No. 7.2163), Guiding glove, left (No. 7.2120)

R 600, R 650


Set No. 7.2956 No. 7.2441

No. 7.2112

No. 5.5016

No. 7.2110

8

No. 7.2431

No. 7.2161

No. 7.2100

No. 7.2142

No. 7.2169

No. 7.2163

No. 7.2541

No. 7.2120

No. 7.2222

No. 7.2263

No. 7.2101

No. 7.2221

Set 7.2956 for standard 22 – 16 mm, consisting of:

Contents as for standard 22 mm, but additionally with 5 x cables dia.

16 mm / 2.3 m (No. 7.2431), Bulb auger dia. 16 / 28 mm (No. 7.2163),

Cable basket for 16 mm cables (No. 7.2110), Blade auger dia.

16 / 25 mm (No. 7.2169), Straight auger dia. 16 / 16 mm (No. 7.2161),

Separating pin 16 mm (No. 7.2100)

Description Versions kg No.

SMK 22 mm with SMK cables 33.0

7.2959

Standard 22 – 16 mm with standard cables 38.0

7.2956

SMK 22 – 16 mm with SMK cables 42.0

7.2967

RO-POWER 22 – 16 mm with profile cables 44.0

7.2953

No. 7.2250

No. 7.2261

Set 7.2956 for standard 22 mm, consisting of:

Plastic case (No. 5.5016), Guiding hose FS 22 / 4.0 m (No. 7.2541),

Spade head cutter dia. 22 / 65 mm (No. 7.2261), 5 x cables dia. 22 mm / 4.5 m (No. 7.2441), Sharktooth cutter dia. 22 / 76 mm

(No. 7.2250), Cable basket for 22 mm cables (No. 7.2112), Straight auger dia. 22 / 22 mm (No. 7.2221), Bulb auger dia. 22 / 40 mm

(No. 7.2263), Separating pin 22 / 32 mm (No. 7.2101), Funnel auger dia. 22 / 55 mm (No. 7.2222), ROWONAL cable spray (No. 7.2142),

Guiding glove, left (No. 7.2120)

221

8


No. 7.2451

R 750, R 80, R 100 SP, R 140 B


Set No. 7.2962

No. 5.5016

No. 7.2111

No. 7.2142

No. 7.2559

No. 7.2329

No. 7.2360

No. 7.2120

No. 7.2101

No. 7.2322

No. 7.2321

No. 7.2325

Set 7.2962 consisting of:

Plastic case (No. 5.5016), Guiding hose FS 32 / 4.0 m (No. 7.2559), x cables 32 mm / 4.5 m (No. 7.2451), Cable basket for 32 mm cables

(No. 7.2111), Straight auger dia. 32 / 32 mm (No. 7.2321), Funnel auger dia. 32 / 60 mm (No. 7.2322), Retrieving auger dia. 32 / 65 mm (No. 7.2325), Spade head cutter dia. 32 / 65 mm (No. 7.2360),

Sawtooth auger dia. 32 / 65 mm (No. 7.2329), Separating pin 22 / 32 mm (No. 7.2101), ROWONAL cable spray (No. 7.2142), Guiding glove, left (No. 7.2120)

Description

RO-POWER 32 mm

Standard 32 mm

SMK 32 mm

Versions kg No.

with profile cables 51.0

7.2954

with standard cables 41.0

7.2962

with SMK cables 47.0

7.2964

Standard tool set 22 mm

No. 855155

No. FF70013

No. 7.2221

No. 7.2222

No. 7.2120

No. 7.2101

No. 7.2142

No. 321215

No. 7.2261

No. 7.2250

No. 2.7210

Set 7.2480 consisting of:

Tool set in sheet steel case (No. 2.7210), Straight auger dia. 22 / 22 mm (No. 7.2221), Allen key SW 5 mm (No. 321215), Funnel auger dia. 22 / 55 mm (No. 7.2222), Grease gun (short) (No. 855155),

Spade head cutter dia. 22 / 65 mm (No. 7.2261), ROWONAL cable spray (No. 7.2142), Sharktooth cutter dia. 22 / 75 mm (No. 7.2250),

Separating pin 22 mm (No. 7.2101), Open-ended spanner SW 13 mm (No. FF70013), Guiding glove, left (No. 7.2101)

Description

Tool set with ROPOWER Profile Cable

Standard tool set 22 mm

222

4.3

kg No.

7.2951-54

7.2480

Bulb auger

Application examples of drain cleaning tools see page 224

The most common tool for cleaning pipes and drains with tight or multiple bends.

Application areas for ROTHENBERGER high-performance drain cleaning tools with safety couplings, suitable for ROTHENBERGER drain cleaning cables with diameters of 16 mm – 5/8”, 22 mm – 7/8” and 32 mm – 1.1/4”

Funnel auger

see page 224

Special tool for retrieving objects from the pipe, e.g. textiles, cables, or tools

Cross-blade cutter, serrated

see page 225

Special tool for opening up solidified pipe obstructions.

Retrieving auger

see page 224

Tool for removing, opening or retrieving obstructions caused e.g.

by textiles.

Chain-spinning heads with spikes

see page 226

For concrete, cast iron, and ceramic pipes. Intensive action.

Without ring = for tight pipe bends, with 3 chains.

Spade head cutter

see page 225

Ideally suited for silt or sludge deposits in pipes, and as a pre-cleaning tool

Carbide drilling heads

see page 227

This carbide-tipped tool is used to remove the hardest obstructions such as cement, urine and water scale, etc.

8

Spiral sawtooth cutter

see page 225

Special tool for chopping up small roots and other material that has become caught in the pipe.

Two-way root cutter

see page 227

Special tool for cutting roots in both directions. Also suitable for solid materials.

223

Drain-cleaning tools

8

● For forking up or drilling through obstructions caused by textiles, paper, cellulose materials, kitchen refuse, etc.

● Standard, highly flexible tool for clearing light textile & paper obstructions

● Large grab capacity can also be used to retrieve cables from drains.

● Hardened spring steel blades

Straight auger

● Standard tool for establishing the nature of an obstruction

● For removing samples to determine a suitable cleaning tool

Coupling mm / inches

16 – 5/8”

22 – 7/8”

32 – 1.1/4” dia. mm

16

22

32

L mm

110

210

220

Working range mm

25 – 75

50 – 100

75 – 250

No.

g

60 7.2161

170 7.2221

350 7.2321

Bulb auger

● Specially designed for small pipes, and drains with multiple bends

Coupling mm / inches dia. mm

L mm

Working range mm g

No.

16 – 5/8”

22 – 7/8”

32 – 1.1/4”

28

40

50

115

180

220

40 – 75

50 – 100

75 – 250

70 7.2163

220 7.2263

490 7.2363

Drop-head auger

● Ideal for particularly tight pipe bends, branches, and small-diameter drain downpipes


L mm

Working range mm g

No.

16 – 5/8” 24 83 40 – 75 60 7.2159

Retrieving auger

● Specially designed tool with a claw for retrieving textiles, tools, cables, etc.


L mm

Working range mm g

No.

16 - 5/8”

22 - 7/8”

32 - 1.1/4”

35

45

65

55

100

125

50 – 75

75 – 150

75 – 250

35 7.2162

110 7.2203

240 7.2325

Funnel auger

● For removing or opening up obstructions caused by textiles or paper.


L mm

Working range mm g

No.

16 – 5/8”

22 – 7/8”

32 – 1.1/4”

32

55

60

110

185

195

50 – 100

110 – 150

100 – 250

80 7.2165

280 7.2222

500 7.2322

Sharktooth cutter

● For cutting through grease deposits

● Cutting up rags and other materials


L mm

Working range mm

16 – 5/8” 30 40 40 – 75

No.

g

20 7.2164

224


Four-blade cutter

● For cutting through and removing tough contaminations

● For sludge deposits

● Hardened spring steel blades

● Ideal with S cable


16 – 5/8” dia. mm

40

L mm

40

Working range mm

50 – 75

No.

g

30 7.2154

Grease cutter


16 – 5/8”

16 – 5/8”

16 – 5/8”

22 – 7/8” dia. mm

25

35

45

45

L mm

35

45

56

60

Working range mm

40 – 75

50 – 75

60 – 100

60 – 125

No.

g

30 7.2169

40 7.2170

50 7.2171

80 7.2234

● Standard tool for removing grease and other soft deposits, e.g. soap accumulations

Spade head cutter


22 – 7/8”

32 – 1.1/4”

32 – 1.1/4” dia. mm

65

65

90

L mm

65

70

100

Working range mm

100 – 150

100 – 150

150 – 200

No.

g

150 7.2261

250 7.2360

280 7.2361

Spiral sawtooth cutter

● Special tool for chopping up small roots, branches, and other materials


L mm

Working range mm g

No.

16 – 5/8”

22 – 7/8”

32 – 1.1/4”

35

45

65

25

40

55

50 – 75

75 – 100

75 – 100

40 7.2166

100 7.2229

210 7.2329

● Curved special tool for silt and sludge deposits

Cross-blade cutter, serrated

● Powerful combination tool for grinding up and removing solidified obstructions

● For coarse removal of incrustations

● As preparatory tool for chain spinning


16 – 5/8”

16 – 5/8”

16 – 5/8”

16 – 5/8”

22 – 7/8”

22 – 7/8”

22 – 7/8”

32 – 1.1/4”

32 – 1.1/4”

32 – 1.1/4”

32 – 1.1/4”

25

35

45

55

45

65

75

45

65

90

115 dia. mm

L mm

60

70

100

120

35

45

56

60

60

60

80

Working range mm

40 – 75

50 – 75

75 – 100

100 – 125

70 – 100

100 – 150

100 – 150

70 – 105

100 – 150

125 – 200

150 – 250

No.

g

30 7.2175

40 7.2176

65 7.2177

80 7.2178

90 7.2275

190 7.2276

220 7.2277

140 7.2374

260 7.2375

490 7.2376

640 7.2377

● Used for textile or sludge obstructions

● Hardened, break-proof, spring steel blades

● Recommended for use with S or SMK cables

8

225


No. 7.2284

Chain-spinning heads without ring, with smooth chain.

● For cleaning greasy and incrusted pipes

● Surface-preserving cleaning of ceramic and plastic pipes

● Without ring:

Improved manoeuvrability in bends

8

226

No. 7.2289

No. 7.2278

No. 7.2182

No. 7.2188


L mm

Without ring, with 2 chains

16 – 5/8”

22 – 7/8”

30

50

155

170


16 – 5/8”

22 – 7/8”

40

60

155

170

Working range mm

50 – 125

70 – 130

60 – 125

80 – 130 g

No.

160 7.2185

530 7.2284

270 7.2187

710 7.2289

Chain-spinning heads with spikes

● With ring:

For better centring in horizontal pipe runs

● Without ring:

Improved manoeuvrability in bends

● With intensive cleaning action

● For concrete and cast iron pipes

● Reduces the risk of renewed obstructions

● Ideal for final cleaning

Chain-spinning heads with ring and spikes


L mm

Working range mm

16 – 5/8”

22 – 7/8”

22 – 7/8”

32 – 1.1/4”

30

65

75

75

160

170

170

220

50 – 125

80 – 100

90 – 125

90 – 125

No.

g

320 7.2182

1,060 7.2285

1,110 7.2286

1,700 7.2341

Without ring, with 2 or 4 chains and spikes


L mm

Working range mm g


16 – 5/8”

22 – 7/8”

32 – 1.1/4”

30

50

70

155

170

220


16 – 5/8” 40 155

22 – 7/8”

32 – 1.1/4”

60

80

170

220

50 – 125

70 – 130

90 – 140

50 – 125

75 – 130

100 – 200

No.

160 7.2186

860 7.2278

1,350 7.2347

280 7.2188

880 7.2299

1,460 7.2348


Carbide-tipped cutters

● Carbide-tipped blades:

For hardest obstructions and incrustations, such as cement deposits, urine and water scale, and other hard deposits

● Carbide-tipped blades durably mounted to the tool body, for long service life



16 – 5/8”

16 – 5/8”

22 – 7/8”

22 – 7/8”

32 – 1.1/4”

32 – 1.1/4”

32 – 1.1/4”

32 – 1.1/4” dia. mm Shape Working range mm

25 straight

30 straight

30 straight

45 pointed

35 – 50

50 – 75

50 – 75

60 – 100

45 straight

55 pointed

60 – 100

70 – 150

65 straight 75 – 200

80 straight 100 – 200

No.

g

70 7.2191

80 7.2193

90 7.2291

320 7.2295

240 7.2392

400 7.2396

410 7.2397

530 7.2398

Serrated forked cutter

● Universal tool for sludge deposits and roots

● Versatile use

● Hardened spring steel cutter with teeth on both sides, long service life, replaceable

Carbide-tipped blades

No. 7.2295

No. 7.2291


22 – 7/8”

32 – 1.1/4”

Spare blade

Spare blade dia. mm

76

76

76

100

L mm

100

100

–

–

Working range mm

100 – 150

120 – 200

–

–

No.

g

230 7.2250

260 7.2350

90 7.2258

120 7.2259

Two-way root cutter

● For chopping up roots and solid materials in both directions

● Hardened spring steel cutter with teeth on both sides, long service life

● Exchangeable



22 – 7/8”

22 – 7/8”

32 – 1.1/4”

32 – 1.1/4”

32 – 1.1/4”

Spare cutter

Spare cutter

Spare cutter

65

90

65

90

150

65

90

150 dia. mm

L mm

80

85

80

90

130

–

–

–

Working range mm

75 – 100

125 – 200

70 – 100

125 – 200

200 – 300

–

–

–

No.

g

250 7.2265

290 7.2266

290 7.2365

330 7.2366

550 7.2367

120 7.2270

150 7.2271

350 7.2272

No. 7.2250

No. 7.2266

8

227


8

HD 11 / 90

Self-priming compact units for 40 - 150 mm diameter, length up to 20 m

For cleaning pipes, drains, domestic connections, rainwater downpipes, cleaning work in sewers as well as surface cleaning of vehicles, machines, buildings, and floor tiles

Technical data:

Max. operating pressure:

Pump delivery: working length:

90 bar

11 l/min

20 m

Electric motor: AC supply

Motor rating: 1.5 kW Max.

Speed: 1,400 rpm

● Ideal for short-term work in small-diameter pipes

● Compact, portable unit

●

●

●

Continuous pressure regulation

Pump with 3 ceramic plungers running in an oil bath, run-dry protection, stainless steel valves, brass pump housing, leakage return flow, pressure gauge with bar/psi scale, self-priming up to 2 m

All versions with integrated suction injector, external supply of cleaning agents, therefore no damage to high-pressure seal

No. 7.6067

No. 7.6073

No. 7.6068

No. 7.2810

No. 7.6066

Contents: HD 11 / 90 (No. 7.6008), 10 m special high-pressure hose with couplings (No. 7.2810), and pipe cleaning nozzle (No. 7.6053)

Description kg 230 V / 50 Hz

High-pressure pipe cleaning unit HD 11/90 29.5

7.6008

Accessories for HD 11 / 90

Description kg No.

High-pressure hose, highly flexible, with R 1/4”, DN 6 coupling

Length 10 m 2.50

7.2810

Length 20 m 4.50

7.2812

Pipe-cleaning nozzles, R1/4”, stainless steel excl. forward jet spray, , 4 holes, dia. 25 x 22 mm 0.04

7.6053

incl. forward jet spray, , 5 holes, dia. 25 x 22 mm 0.04

7.6063

Rotary nozzle 45°, 4 holes, dia. 16 x 30 mm 0.08

7.7503

Cleaning lance with wide-angle nozzle for surface cleaning

Spare wide-angle nozzle

1.30

0.01

7.6073

7.6082

Injector suction pipe for cleaning agents, only for use with cleaning lance, length 1.2m

Water suction hose for intake from containers, length 3.0 m

0.05

0.20

7.6067

7.6066

Accessories for HD 13 / 100 –

17 / 190 – 19 / 180 B

Description kg No..

High-pressure hose, highly flexible, with R 1/4” coupling

Length 10 m, DN 6 (HD 13/100, HD 17/190) 2.50

7.2810

Length 20 m, DN 6 (HD 13/100, HD 17/190)

Length 40 m, DN 8 (HD 19/180 B)

4.50

10.70

7.2812

7.2820

Pipe-cleaning nozzles, R1/4“, stainless steel excl. forward jet spray, 4 holes, dia. 25 x 22 mm incl. forward jet spray, 5 holes, dia. 25 x 22 mm

Rotary nozzle 45°, 4 holes, dia. 16 x 30 mm

0.04

7.6052

0.04

7.6065

0.08

7.7506

Cleaning lance with wide-angle nozzle for surface cleaning

Spare wide-angle nozzle

1.30

7.6068

0.01

7.6088

Injector suction pipe for cleaning agents,

Length 1.2 m, only for use with cleaning lance 0.05

7.6067

Water suction hose, length 3.0 m for suction from containers 0.20

7.6066

228


Self-priming compact units for 40 - 150 mm diameter, up to 20 m length, and 40 - 200 mm diameter, up to

40 m length

For cleaning pipes, drains, domestic connections, rainwater downpipes, cleaning work in sewers as well as surface cleaning of vehicles, machines, buildings, and floor tiles

● Continuous pressure regulation

● Pump with 3 ceramic plungers running in an oil bath, run-dry protection, stainless steel valves, brass pump housing, leakage return flow, pressure gauge with bar/psi scale, self-priming up to 2 m

● All versions with integrated suction injector, external supply of cleaning agents, therefore no damage to high-pressure seal

HD 13 / 100

● With cover, mounted on air- filled transport wheels

● Integrated hanger for cleaning lance

Technical data:


Pump delivery:

100 bar

13 l/min

Max. working length: 20 m

Electric motor: single-phase

Motor rating: 2.3 kW

Speed: 1,400 rpm

Contents: HD 13 / 100 (No. 7.6020), reel with 20 m special highpressure hose with couplings (No. 7.2812), and pipe cleaning nozzle

(No. 7.6052)


High-pressure drain cleaning unit HD 13 / 100 45.0

7.6020

HD 17 / 190

● With cover, mounted on air- filled transport wheels


Technical data:


Pump delivery:

190 bar

17 l/min

Max. working length:40 m

Electric motor: three-phase

Motor rating: 5.0 kW

Speed: 2,800 rpm

Contents: HD 17 / 190 (No. 7.6070), 20 m special high-pressure hose with couplings (No. 7.2812), and pipe cleaning nozzle (No. 7.6052)


High-pressure drain cleaning unit HD 17 / 190 50.0

7.6070

HD 19 / 180 B

● Independent from electric power supply

Petrol engine, universal use

● Mounted on air- filled transport wheels


Technical data:


Pump delivery:

180 bar

19 l/min

Max. working length: 40 m

Tank capacity: 6.5 l

Motor rating:

Speed:

8,1 kW

1,800 rpm

Petrol engine: Honda

Consumption: 3.2 l/h

Contents: HD 19 / 180 (No. 7.6090), reel with 40 m special highpressure hose DN 8 and couplings (No. 2820), and pipe cleaning nozzle (No. 7.6053)

Description kg No.

High-pressure drain cleaning unit HD19 / 180 B 78.5

7.6090

8

229


8

ROJET high-pressure cleaning units

Offer the advantage of free vehicle choice, designed for mounting in any suitable vehicle or trailer, whereby the containerised design permits them to be re-installed in a different vehicle at any time


● Free vehicle choice:

Suitable for mounting in or on different vehicle types

● Speed limiting:

Prevents the pump overspeeding

● High-quality construction:

Low maintenance, long service life of motor, pump, and hydraulics

● Mobile hose reel for small pipe diameters:

●

Cleaning of pipes from 40 mm diameter upwards

Built-in pressure selection valve:

Permits using the lance e.g. for cleaning surfaces, exterior walls, courtyards, vehicles, etc.

●

●

Separate engine:

Operation is independent of vehicle engine, thus ensuring minimum maintenance costs as well as clear differentiation of guarantees for cleaning unit and vehicle manufacturer

12-month guarantee on engine, pump, and hydraulics, guaranteed spare parts service thanks to series production

● No auxiliary drive required in vehicle

Description

ROJET 40/100

Accessories kg No.

200.0

7.6100

kg No.

Nozzle set 40/100 6.5

7.6304

consisting of: Nozzle holder (No. 7.6309), Standard nozzle with forward jetting (No. 7.7602), Grenade nozzle (No. 7.7632),

Rotating nozzle (No. 7.7622), Flat nozzle (No. 7.7642), 3-sided

Quattro nozzle (No. 7.7612)

ROJET 40 / 100

High-pressure drain cleaning unit for pipe diameters of

40 - 200 mm


Main frame:

Engine:

Pump:

Starter battery:

Water tank:

Fuel tank:

High-pressure reel:

High-pressure hose:

Dimensions:

Supplements:

Profiled steel, hot-galvanised

4-stroke petrol engine, 1 cylinder air-cooled, electric starter, automatic speed control, rating 9.5 kW (13 HP)

3-plunger type, delivery 40 l/min at 100 bar

12 V, 36 Ah

Plastic, 200 litres

6 litres

Manual crank, swivel joint

DN 12, length 50 m, coupling R1/2”

1200 x 1000 x 700 mm (L x W x H)

Water filter, glycerine pressure gauge, pressure selector cock, safety valve, standard nozzle, anti-freeze suction

Description kg No.

ROJET 30/130 basic unit without trailer

ROJET 30/130 basic unit with trailer

200.0

290.0

Accessories kg

7.6301

7.6300

No.

Nozzle set 30 / 130 6.5

7.6303




ROJET 30 / 130


40 - 200 mm


Engine: Robust 4-stroke engine, 1 cylinder air- cooled electric starter, rating 9.5 kW (13 HP), regular grade petrol

Starter battery: 12 V, 36 Ah

High-pressure pump: 3-plunger type, delivery 30 l/min at 130 bar

Water tank:

High-pressure reel:

Filling reel:

High-pressure hose:

Plastic, capacity 200 litres

Stainless steel reel, rotatable water coupling, manual operation

Stainless steel reel, rotatable water coupling, manual operation

DN 12, length 50 m

Filling hose:

Included in delivery:

Trailer:

DN 19, length 50 m

High-performance nozzle 1/2”

Box type, unbraked

Covering:

Overall dimensions:

Tarpaulin and frame, height 800 mm

2520 x 1480 x 1700 mm (L x W x H)

Gross vehicle weight: 550 kg

Included in delivery: 1 prop stand

230


ROJET 50 / 120


70 - 300 mm


Main frame:

Engine:

Profiled steel, hot-galvanised, stain less steel uprights

4-stroke petrol engine, 2 cylinders air-cooled, electric starter, automatic speed control,rating 15 kW (20 HP)


12 V, 36 Ah

Pump:

Starter battery:

Water tank:

Fuel tank:

High-pressure reel:

Plastic, 400 litres

15 litres

Manual or hydraulic operation

High-pressure hose: DN 12, length 80 m

Filling reel: Manual operation

Filling hose:

Water tank:

Dimensions:

Equipment:

DN 19, length 50 m

Plastic, 400 litres Other sizes possible

Type L for trailers and vans

1,600 x 1,200 x 950 mm (L x W x H)

Type S for vans

1,050 x 1,200 x 1,300 mm (L x W x H)

Water filter, glycerine pressure gauge, safety valve, anti-freeze suction, pressure selector cock, and standard nozzle

No. 7.6240

Description kg No.

ROJET 50/120 Type L (high-pressure reel, manual) 300 7.6110

ROJET 50/120 Type L (high-pressure reel, hydraulic) 300 7.6240

ROJET 50/120 Type S (high-pressure reel, manual) 300 7.6260

ROJET 50/120 Type S (high-pressure reel, hydraulic) 300 7.6290

Accessories kg No.

Nozzle set 50 / 120 6.5

7.6305




ROJET 85 / 160 B – 85 / 160 D


70 - 500 mm


Main frame:

Engine:

Pump:

Starter battery:

Water tank:


Petrol engine (alternative: diesel engine),

4-cylinder water cooled, rating 32 kW

(44 HP), automatic speed control


12 V, 36 Ah

Plastic, 400 litres, other sizes possible

(Diesel engine 800 litres)

High-pressure reel: Hydraulic operation, continuous control


Filling reel:

Filling hose:

Manual operation

DN 19, length 50 m

Filling via C-coupling

Dimensions:

Equipment:

1,700 x 1,240 x 950 mm (L x W x H)

400 l tank, petrol engine

1,700 x 1,240 x 1,300 mm (L x W x H)

800 l tank, diesel engine

Run-dry protection, water level indicator, water filter, glycerine pressure gauge, safety valve, anti-freeze suction, pressure selector cock, and standard nozzle, instrument panel with engine indicator lamps, ignition lock, operating hours counter, and fuel gauge

No. 7.6120

Description kg No.

ROJET 85/160 B with petrol engine

ROJET 85/160 D with diesel engine

600

640

Accessories kg

7.6120

7.6115

No.

Nozzle set 85/160 6.5

7.6308




8

231


8

Equipment: Run-dry protection, electronic water level indicator, water filter, glycerine pressure gauge, safety valve, pressure selector cock, rev counter, voltmeter, operating hours counter, fuel gauge, temperature indicator, clock, emergency stop switch, ignition lock, lockable stowage compartments, standard nozzle, and anti-freeze suction

ROJET 75 / 170 B – 75 / 170 D

High-pressure drain cleaning unit for pipe diameters of 500 mm


Main frame:

Cover panels:


Stainless steel sheet

Engine: Petrol engine (alternative: diesel engine),

4-cylinder water cooled, rating 32 kW (44 HP), automatic speed control

3-plunger type, delivery 75 l/min at 170 bar Pump:

Starter battery:

Water tank:

12 V, 36 Ah

Plastic, 400 litres, other sizes possible

High-pressure reel: Hydraulic operation, continuous control, pipe guidance


Filling reel:

Filling hose:

Dimensions:

Hydraulic operation, continuous control

DN 19, length 50 m

1,700 x 1,200 x 1,260 mm (L x W x H)

Description kg No.

ROJET 75 / 170 B

ROJET 75 / 170 D

620

670

Accessories kg

7.6400

7.6450

No.

Nozzle set 75 / 170 6.5

7.6307




(available on request)

ROVAC 1200


Vessel:

Vacuum pump:

Engine:

Chassis:

Dimensions:

Accessories:

Cylindrical steel container, dip-galvanised inside and outside, contents 1.2 m 3 , lid opens completely, suction and drain couplings with 3” ball valve and PERROT coupling, 3 sight glasses as level indicators, pipe storage bracket

Airflow rate approx. 5,000 l/min, max. pressure

0.5 bar, max. vacuum 90 %, air silencer, oil separator, automatic lubrication, pressure gauge, selector lever for suction / pressure

Petrol engine, 2 cylinders, air-cooled, rating

11.9 kW, manual and electric starting, starter battery

Tandem trailer, gross vehicle weight 2,300 kg, equipment in accordance with German road traffic regulations (STVZO), TÜV-tested, and operating permit

3,800 x 1,590 x 1,900 mm (L x W x H)

2 suction hoses DN 75 x 5 m,

1 suction lance DN 75 x 2 m

1 sludge scraper with holder

Description

ROVAC 1200 with trailer chassis kg No.

1,050 7.6181

232

Standard nozzle G 1/2”

●

●

●

●

Intended for general-purpose use versatile flexible hard-pulling

Features

●

●

Pipe cleaning nozzle of V4A stainless steel

Suitable for removing obstructions or for flushing pipes and drains


Versions for ROJET 30/130 for ROJET 40/100 for ROJET 50/120 for ROJET 85/160 for ROJET 75/170 dia. x L mm

30 x 50

30 x 50

30 x 50

30 x 50

30 x 50 kg No.

0.12

7.7601

0.12

7.7602

0.12

7.7603

0.12

7.7604

0.12

7.7605

Quattro 3-sided nozzle G 1/2”

Pipe cleaning nozzle with 3-sided point and 4 forward-facing jets

(M5 grub screws).

●

●

3-sided point:

Supports quick removal of tough obstructions through ripping, cutting, and drilling

Another application area is cleaning away pipe-pressing residues, and forward broaching

No. 7.7601


30 x 60

30 x 60

30 x 60

30 x 60

30 x 60 kg No.

0.11

7.7611

0.11

7.7612

0.11

7.7613

0.11

7.7614

0.11

7.7615

Rotating nozzle G 1/2”

●

●

●

●

Rotating nozzles of V4A stainless steel

Hardened

4 different jet angles

Ensures maximum cleaning power

(propulsion part 25°, pipe 90°, 75°, and 60°)

Use and application areas

●

●

●

●

●

Grease contaminations

All-round cleaning before TV camera inspection

Removal of light deposits

Removal of roots

Basic cleaning before reconditioning


39 x 78

39 x 78

39 x 78

39 x 78

39 x 78 kg No.

0.55

7.7621

0.55

7.7622

0.55

7.7623

0.55

7.7624

0.55

7.7625

No. 7.7613

No. 7.7625

8

233


Grenade nozzle G 1/2” with traction jet

●

●

●

●

Stainless cleaning nozzle for drains up to max. 300 mm

Optimized water flow:

Enures very high cleaning efficiency

In combination with 2 different jet angles:

Results in high traction and cleaning performance

Nozzles: M 8 grub screws

No. 7.7602

Versions for ROJET 30 / 130 for ROJET 40 / 100 for ROJET 50 / 120 for ROJET 85 / 160 for ROJET 75 / 170 dia. x L mm

60 x 95

60 x 95

60 x 95

60 x 95

60 x 95 kg No.

1.36

7.7631

1.36

7.7632

1.36

7.7633

1.36

7.7634

1.36

7.7635

Flat nozzle G 1/2”

This is a wedge-shaped flat nozzle with slight jetting effect

(approx. 2°), i.e. for bottom cleaning. It is excellently suited for crossing long distances, and for transporting heavy or sandy cleaning residues.

Nozzle arrangement

● Ensures utmost traction and cleaning performance simultaneously

● Nozzles: M 6 grub screws

8

No. 7.7642

Versions for ROJET 30 / 130 for ROJET 40 / 100 for ROJET 50 / 120 for ROJET 85 / 160 for ROJET 75 / 170 dia. x L mm

88 x 150

88 x 150

88 x 150

88 x 150

88 x 150 kg No.

2.95

7.7641

2.95

7.7642

2.95

7.7643

2.95

7.7644

2.95

7.7645

Nozzle assortment G 1/2”

Nozzle sets for ROJET

No. 7.7642

No. 7.6309

Example for ROJET 40 / 100,

Set No. 7.76304

No. 7.7632

No. 7.7622

No. 7.7612

No. 7.7602

Contents: 1 each standard nozzle with forward jetting and blind plug, Quattro 3-sided nozzle, rotating nozzle, grenade nozzle, flat nozzle

Versions kg No.

for ROJET 30 / 130 for ROJET 40 / 100 for ROJET 50 / 120 for ROJET 85 / 160 for ROJET 75 / 170

Accessories

5.10

7.6303

5.10

7.6304

5.10

7.6305

5.10

7.6308

5.10

7.6307

kg No. W x L mm

Nozzle holder 50 x 370 1.28

7.6309

for nozzle assortment with 5 x 1/2” mounting threads

234

High-pressure hose

● Highly flexible

● Complete with couplings

No. 7.6189

Accessories for high-pressure drain cleaning

No.7.6131

Deflector rolls

No. 7.7500

High-pressure cleaning lance

No. 7.7501

Nominal diameter mm

8

13

13

16

Coupling

R1/4”

R1/2”

R1/2”

R1/2”

L m

40

50

80

80 kg

9.4

20.0

52.0

67.0

No.

7.2820

7.6130

7.6131

7.6119

Threaded couplings kg No.

for high-pressure hose DN 13 mm – R1/2” internal 0.21

7.6133

for high-pressure hose DN 13 mm – R1/2” external 0.21

7.6134

● for reduced wear and tear of the high-pressure hose

Versions for bottom manhole edge for upper manhole edge kg No.

6.2

7.7500

5.0

7.7501

● Complete with threaded coupling and flat jet nozzle insert for channel, surface, and component cleaning

Versions for ROJET 40/100 - 50/120 – 30/130

Spare wide-angle nozzle for ROJET 85/160 kg No.

0.28

7.6187

0.02

7.6167

3.10

7.6189

Hose reel, mobile

● Ideal for cleaning domestic drains and downpipes

●

●

Suitable for all ROJET versions

Inlet R1/2”

Contents:

No. 7.6118

●

●

●

●

Manual crank

Swivel joint

Shut-off valve

40 m high-pressure hose DN 8 with R 1/4” coupling, and standard drain cleaning nozzle R 1/4” No. 7.6055

Downpipe nozzle

No. 7.6154

Suction injector

No. 7.6191

Versions kg No.

Hose reel, complete 26.5

7.6118

Individual parts:

Hose reel, inlet 1/2”

40 m high-pressure hose DN 8, coupling R 1/4”

17.0

7.6160

9.40

7.2820

Drain cleaning nozzle R 1/4”, without forward jetting 0.04

7.6055

Drain cleaning nozzle R 1/4”, with forward jetting 0.04

7.6065

Rotating nozzle R 1/4”, 45° 0.08

7.7506

8

●

●

●

For vertical use in roof drains, ducts, and pipes

Only for use with hose reel No. 7.6118 or with ROJET 19/180 and high-pressure hose No. 7.2820

With 3 flat jet nozzle inserts

Version

Stainless steel

No. of nozzles

Coupling dia. x length mm

3 R 1/4” 50 x 125

No.

kg

1.6

7.6154

Can be used with all ROJET versions

● For suction cleaning of silted channels, drains, grease separators, etc.

● No need for a separate pump

Version kg No.

High-pressure coupling R1/2”, with 6 m spiral hose 5.50

7.6191

Spare circular jet nozzle insert 0.01

7.6192

235

No results