advertisement
OF
Safety • Assembly • Operation • Adjustment • Maintenance • Troubleshooting • Warranty
A O
AL
Shift=On-The=Go'" Lawn Tractor -- Models 760=779 iMPORTANT
READ SAFETY RULES AND iNSTRUCTiONS CAREFULLY BEFORE OPERATION
Warning: This unit is equippedwithan internalcombustionengineand shouldnot be usedon or nearany unimprovedforest-covered,brushcoveredor grass-coveredland unlesstheengine'sexhaustsystemis equippedwith a sparkarrestermeetingapplicablelocalor statelaws(if any).
If a sparkarresteris used,it shouldbe maintainedin effectiveworkingorder by the operator.In theState of Californiathe aboveis requiredbylaw
(Section4442 of the CaliforniaPublicResourcesCode). Otherstatesmay havesimilarlaws.Federallaws applyon federallands.A sparkarrester for the muffleris availablethroughyour nearestengineauthorizedservicedealeror contactthe servicedepartment,RO. Box361131Cleveland,
Ohio 44136-0019.
PRINTEDIN U.S.A.
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
FORMNO. 769-01598C
01/22/2007
This Operator's Manual is an important part of your new lawn tractor, it will help you assemble, prepare and maintain the unit for best performance. Please read and understand what it says.
Table of Contents
Slope Gauge ........................................................
Safe Operation Practices ...................................
Setting UpYour Lawn Tractor ............................
8
3
4
Operating Your Lawn Tractor ...........................
12
Adjusting Your Lawn Tractor ............................
20
Maintaining Your Lawn Tractor ........................
22
Off-Season Storage / Attachments .................
28
Safety Labels ....................................................
29
Trouble Shooting ..............................................
Warranty ..............................................
30
Back Page
Finding and Recording Model Number
BEFOREYOU STARTASSEMBLING YOUR NEW EQUIPMENT, please locate the model plate on the equipment and copy the informationto the sample model plate providedto the right. You can locate the model plate by looking beneath the seat.
Model Number
This information will be necessary to use the manufacturer's web site and/or obtain assistance from the Customer Support Department or an authorized service dealer.
® www.mtd prod ucts.corn
Serial Number
MTD LLC
P.O.
BOX 361131
CLEVELAND, OH 44136
330=220=4683
800=800=731 0 j
Customer Support
Please do IVOTreturn the unit to the retailer from which it was purchased, without first contacting Customer Support.
If you have difficulty assembling this product or have any questions regardingthe controls, operation,or maintenanceof this unit, you can seek help from the experts. Choose from the options below:
1. Visit www.mtdproducts.com.
2. Phone a Customer Support Representative at 1 (800) 800-7310.
3. The engine manufacturer is responsiblefor all engine-related issues with regards to performance, power-rating,specifications, warranty and service. Please refer to the engine manufacturer'sOwner's/Operator's Manual, packed separatelywith your unit.
2
>:.
G.) o9
(13
(13
E c_
O
O
O
C
::>.,
G.)
_-o6
(13 co .oo
G.) o9
o -_
O9 C:_
_
G.)
C
O9
C o
(13
_
O
(13
C c_
0 o3
0
C co
_ a
0
Sight and h01dthis level with a vertical tree..,
i
I
I
m_,_ or a corner of a building...
or a fence post
i
I
__
-do; fine (repros
I _ _ er_ts a 15o
_0
15°
WARNING: Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of Californiato cause cancer and birth defects or other reproductive harm.
DANGER: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects.
Failureto observe the following safety instructions could result in serious injury or death.
Operation
WARNING
This symbol points out important safety instructionswhich, if not followed, could i endangerthe personal safety and/or property ofyourself and others.
I Read and follow all i instructions in this mani ual before attempting to i operate this machine.
Failureto comply with these instructions may result in personal injury.
i Whenyou see this symbol.
i HEED ITS WARNING
Your i Responsibility
Restrict the use of this power machine
I to persons who read, understand and follow the warnings and instructions in this manual
Children Operation
1. Tragicaccidentscanoccur if the operatoris not alertto the presenceof children.Childrenare often attractedto themachineand the mowingactivity.
Theydo not understandthe dangers.Neverassume
that childrenwill remainwhereyou last sawthem.
a. Keepchildrenout of the mowingarea and in watchfulcare of a responsibleadultother than the operator.
b. Be alert and turnmachineoff ifa childenters the area.
c. Beforeand while backing,lookbehindand downfor smallchildren.
d. Nevercarry children,evenwith the blade(s) shutoff.They mayfalloff and be seriously injuredor interferewith safemachineoperation.
e. Use extremecarewhenapproachingblind corners,doorways,shrubs,trees or other objectsthat may blockyourvision of a child whomay run intothe machine.
f. To avoid back-over accidents, always
disengagethe cuttingblade(s) before
shiftinginto Reverse.If equipped,the
"Reverse CautionMode"shouldnot be used when childrenor others are around.
g. Keepchildrenaway from hotor running engines.They can sufferburnsfroma hot muffler.
h. Removekeywhenmachineis unattendedto preventunauthorizedoperation.
2. Neverallowchildrenunder 14 yearsold to operate the machine.Children14years old and overshould safety rulesinthis manualand shouldbe trainedand supervisedbya parent.
Safe Handling of Gasoline:
1. Toavoid personalinjuryor propertydamageuse extremecare in handlinggasoline.Gasolineis extremely flammableand the vapors are explo-
sive. Seriouspersonalinjurycan occurwhengasoline
isspilledon yourselfor yourclotheswhichcan ignite.
Washyourskin and changeclothesimmediately. a. Use onlyan approvedgasolinecontainer.
b. Neverfill containersinsidea vehicleor on a truckor trailerbed with a plasticliner.Always
placecontainerson the groundawayfrom yourvehiclebeforefilling.
c. Whenpractical,removegas-powered equipmentfromthe truckor trailerand refuelit on the ground.If this isnotpossible,then refuelsuch equipmenton a trailerwith a portablecontainer,ratherthan froma gasoline dispensernozzle.
d. Keepthe nozzlein contactwith the rimof the fueltank or containeropeningat all timesuntilfuelingiscomplete.Donot usea nozzlelock-opendevice.
e. Extinguishall cigarettes,cigars,pipesand othersourcesof ignition. f.
Neverfuel machineindoors.
g. Neverremovegas cap or add fuel whilethe engineishot or running.Allowengineto cool at least two minutesbeforerefueling.
h. Neveroverfill fuel tank.Fill tank to no more than1/2inchbelowbottomof filler neck to allowspacefor fuel expansion.
i.
Replacegasolinecapand tighten securely.
j.
If gasolineis spilled,wipe it off theengine and equipment.Moveunit to anotherarea.
Wait5 minutesbeforestartingtheengine.
k. Toreducefirehazards,keepmachinefreeof grass,leaves,or otherdebris build-up.Clean
up oil or fuel spillageand removeanyfuel soakeddebris.
I.
Neverstorethe machineor fuel container insidewherethere is an open flame,spark or pilot lightas on a waterheater,space heater,furnace,clothesdryeror other gas appliances.
m. Allowa machineto cool at least five minutes beforestoring.
4
GeneralOperation:
1. Read,understand,and followall instructionson the machineand in the manual(s)beforeattemptingto assembleand operate.Keepthis manualin a safe placefor future and regularreferenceand for ordering replacementparts.
2. Be familiarwith all controlsandtheir properoperation.
Knowhow to stopthe machineand disengagethem quickly.
3, Neverallowchildrenunder 14yearsold to operate this machine.Children14years old and overshould readand understandthe operationinstructionsand safety rulesin this manualand shouldbe trainedand supervisedby a parent.
4. Neverallowadults to operatethis machinewithout proper instruction.
5. To helpavoidblade contactor a thrownobject injury, keep bystanders,helpers,childrenand petsat least
75 feet fromthe machinewhileit is in operation.Stop
machineif anyoneenters thearea.
6. Thoroughlyinspectthearea wheretheequipmentis to be used. Removeall stones,sticks,wire,bones,toys, and otherforeignobjectswhichcouldbe pickedup and thrown bythe blade(s).Thrownobjectscancause
seriouspersonalinjury.
7. Planyourmowingpatternto avoiddischargeof materialtowardroads,sidewalks,bystandersand the like. Also,avoiddischargingmaterialagainsta wall or obstructionwhich maycause dischargedmaterialto ricochetback towardthe operator.
8. Alwayswear safetyglassesor safetygogglesduring operationand while performingan adjustmentor repairto protectyoureyes.Thrownobjectswhich
ricochetcancause seriousinjuryto the eyes.
9. Wearsturdy,rough-soledwork shoesand close-fitting slacks and shirts. Loosefittingclothesandjewelry can be caught in movableparts.Neveroperatethis
machinein barefeet or sandals.
10.Be awareof the mowerand attachmentdischarge directionand do not pointit at anyone.Donot operate the mowerwithoutthe dischargecoveror entiregrass catcherin its properplace.
11.Donot put handsor feet near rotatingpartsor under the cuttingdeck. Contactwith the blade(s)can amputatehandsand feet.
12.A missingor damageddischargecovercan cause blade contactor thrown objectinjuries.
13.Stop the blade(s)whencrossinggraveldrives,walks, or roadsand whilenot cuttinggrass.
14.Watchfor traffic whenoperatingnearor crossing roadways.This machineis not intendedfor useon anypublic roadway.
15.Do notoperatethe machinewhileunderthe influenceof alcoholor drugs.
16.Mowonly in daylightor good artificiallight.
17.Nevercarry passengers.
18.Disengageblade(s)beforeshiftinginto reverse.
Back up slowly.Alwayslookdownand behindbefore and whilebackingto avoida back-overaccident.
19.Slowdownbeforeturning.Operatethe machine smoothly.Avoiderraticoperationand excessive speed.
20.Disengageblade(s),set parkingbrake,stopengine and wait untilthe blade(s)cometo a completestop beforeremovinggrass catcher,emptyinggrass, uncloggingchute,removingany grassor debris,or makinganyadjustments.
21.Neverleavea runningmachineunattended.Always
turnoff blade(s), placetransmissionin neutral,set parkingbrake,stop engineand removekey before dismounting.
22.Useextracare whenloadingor unloadingthe machineintoa traileror truck. This unit shouldnot be drivenup or downramp(s),becausethe unit couldtip over,causingseriouspersonalinjury.The
unit mustbe pushedmanuallyon ramp(s)to load or unloadproperly.
23.Mufflerand enginebecomehotand can causea burn.Do nottouch.
24.Checkoverheadclearancescarefullybeforedriving
under lowhangingtreebranches,wires,dooropeningsetc., wheretheoperatormaybe struckor pulled fromthe unit,which couldresult in seriousinjury.
25.Disengageall attachmentclutches,depressthe brakepedalcompletelyand shift into neutralbefore attemptingto startengine.
26.Yourmachineisdesignedto cut normalresidential grassof a heightno morethan 10".Do notattemptto mowthroughunusuallytall, dry grass (e.g.,pasture) or pilesof dry leaves.Dry grass or leavesmay contactthe engineexhaustand/orbuild up on the mowerdeck presentinga potentialfire hazard.
27.Use onlyaccessoriesand attachmentsapprovedfor this machinebythe machinemanufacturer.Read, understandand followall instructionsprovidedwith the approvedaccessoryor attachment.
28.Data indicatesthat operators,age 60 yearsand above,are involvedin a largepercentageof riding mower-relatedinjuries.Theseoperatorsshould
evaluatetheirability to operatethe ridingmower safelyenoughto protectthemselvesand othersfrom seriousinjury.
29.If situationsoccurwhich are not coveredin this manual,usecareand good judgment.Contactyour
customerservicerepresentativefor assistance.
!i!i
¸¸¸:¸/: :!i ¸ ¸¸¸ : :
WARNING
This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others.
Read and follow all instructions in this manual before attempting to operate this machine.
Failureto comply with these instructions may result in personal injury.
When you see this symbol.
HEED ITS WARNING
Your
Responsibility
Restrictthe use of this power machine to persons who read, understand and follow the warnings and instructions in this manual
5
Operation
This symbol points out important safety instructions which, if not followed, could endangerthe personal i safety and/or property of yourself and others.
Read and follow all
=nstructionsin this manual before attempting to
I operate this machine.
I Failureto comply with i these instructions may i result in personal injury.
When you see this symbol.
HEED ITS WARNING
Slopesare a majorfactor relatedto loss of controland tip-overaccidentswhich can resultin severeinjuryor death.All slopesrequireextracaution.If youcannot back up the slopeor if youfeel uneasyon it, do notmow it.
Foryour safety,usethe slopegaugeincludedas partof this manualto measureslopesbeforeoperatingthis unit on a slopedor hillyarea. If the slopeis greaterthan 15 degreesas shownon theslopegauge,do notoperate this unit on that area or seriousinjurycouldresult.
DO:
1. Mow up and downslopes,notacross. Exercise extremecautionwhenchangingdirectionon slopes.
2. Watchfor holes, ruts,bumps,rocks,or other hidden objects.Uneventerraincouldoverturnthe machine.
Tallgrasscan hide obstacles.
3. Use slow speed.Choosea low enoughspeed settingso that youwill not haveto stopor shift while on the slope.Tires may losetractionon slopeseven thoughthe brakesare functioningproperly.Always
keepmachinein gear whengoingdown slopesto take advantageof engine brakingaction.
Do Not:
1. Do notturn on slopesunlessnecessary;then,turn slowlyand graduallydownhill,if possible.
2. Do not mownear drop-offs,ditchesor embankments.
Themowercouldsuddenlyturnoverif a wheel is over the edgeof a cliff, ditch,or if an edge cavesin.
3. Do nottry to stabilizethe machineby puttingyourfoot on the ground.
4. Do not usea grasscatcheron steep slopes.
5. Do not mowon wet grass. Reducedtractioncould causesliding.
6. Do not shiftto neutraland coastdownhill.Over-speeding may causethe operatorto losecontrol of the machineresultingin seriousinjuryor death.
7. Do nottow heavypull behindattachments(e.g.loaded
dumpcart, lawnroller,etc.)on slopesgreaterthan
5 degrees.Whengoingdown hill,the extra weight tendsto pushthe tractorand may causeyou to loose control.(e.g. tractormayspeedup, brakingand steering ability are reduced,attachmentmayjack-knifeand causetractorto overturn).
wheelweightsor counterweightsto improvestability.
5. Use extracare with grasscatchersor otherattachments.Thesecanchangethe stabilityof the machine.
6. Keepall movementon the slopesslowand gradual.
Do not makesuddenchangesin speedor direction.
Rapidengagementor brakingcouldcausethe front of the machineto lift and rapidlyflip overbackwards whichcouldcause seriousinjury.
7. Avoidstartingor stoppingon a slope.If tires lose traction,disengagethe blade(s)and proceedslowly straightdownthe slope.
Towing:
1. Towonlywith a machinethat hasa hitch designedfor towing.Donot attachtowedequipmentexceptat the hitch point.
2. Followthe manufacturersrecommendationfor weight limitsfor towedequipmentand towingon slopes.
3. Neverallowchildrenor othersin or on towedequipment.
4. On slopes,the weightof the towedequipmentmay causeloss of tractionand loss of control.
5. Travelslowlyand allowextra distanceto stop.
6. Do not shiftto neutraland coastdownhill.
Your
Responsibility
Restrict the use of this power machine to persons who read, understand and follow the warn=ngs and instructions in this manual
6
Service
1. Neverrun an engineindoorsor in a poorlyventilated area. Engineexhaustcontainscarbonmonoxide,an odorless,and deadlygas.
2. Beforecleaning,repairing,or inspecting,makecertain the blade(s)and all movingparts havestopped.
Disconnectthe sparkplug wireand groundagainstthe engineto preventunintendedstarting.
3. Periodicallycheckto make surethe bladescome to completestop withinapproximately(5) five seconds after operatingthe bladedisengagementcontrol.If the bladesdo notstop within thethis timeframe,yourunit shouldbe servicedprofessionallyby an authorized
MTDServiceDealer.
4. Checkbrakeoperationfrequentlyas it is subjectedto wearduring normaloperation.Adjustand serviceas required.
5. Checkthe blade(s)and enginemountingbolts at frequentintervalsfor propertightness.Also,visually inspectblade(s)for damage(e.g.,excessivewear, bent, cracked). Replacethe blade(s)with theoriginal equipmentmanufacturer's(O.E.M.)blade(s)only, listed inthis manual."Useof partswhich do not meet the originalequipmentspecificationsmaylead to
improperperformanceand compromisesafety!"
6. Mowerbladesare sharp.Wrapthe bladeor wear gloves,and useextra cautionwhenservicingthem.
7. Keepall nuts, bolts,and screwstight to be surethe equipmentis insafe workingcondition.
8. Nevertamperwith the safety interlocksystemor other safety devices.Checktheir properoperationregularly.
9. After strikinga foreignobject,stop the engine, disconnectthe spark plug wire(s)and groundagainst the engine.Thoroughlyinspectthe machinefor any damage.Repairthe damagebeforestartingand operating.
10.Neverattemptto makeadjustmentsor repairsto the machinewhilethe engine isrunning.
11.Grasscatchercomponentsand the discharge coverare subjectto wearand damagewhich could exposemovingpartsor allowobjectsto be thrown.
Forsafety protection,frequentlycheckcomponents and replaceimmediatelywith originalequipment manufacturer's(O.E.M.)parts only,listed in this manual."Useof parts which do not meetthe original equipmentspecificationsmay leadto improper performanceand compromisesafety!"
12.Do notchangethe enginegovernorsettingsor over-speedthe engine.Thegovernorcontrolsthe
maximumsafe operatingspeedof the engine.
13.Maintainor replacesafety and instructionlabels,as necessary.
14.Observeproperdisposallawsand regulationsfor gas, oil,etc. to protecttheenvironment.
This symbol points out important safety instructions which, if not followed, could endangerthe personal safety and/or property of yourself and others.
Read and follow all instructions in this manual before attempting to operate this machine.
Failureto comply with these instructions may result in personal injury.
When you see this symbol.
HEED iTS WARNING
Your
Responsibility
Restrictthe use of this power machine to personswho read, understand and follow the warn=ngs and instructions in this manual
7
Use extreme care
henhandling
extremely flammable and the vapors are explosive: Never fuel machine indoors
or while the engine
is hot or running:
Extinguish cigarettes,
pipes,
other sOurceS of ignition:
NOTE: This Operators
Manual Coversa range of prOduCtSpecifications for various models.
Characteristicsand features disCussed and/or illustrated
I this manual may not be applicable to all modelsl
MTD LLC reservesthe right tOchange product specifiCationsldesigns and equipment without notice and without incurting oblieation ,,
Rubber Boot
Figure 3-1
NOTE:This OperatorsManualcoversa rangeof product specificationsfor variousmodels.Characteristicsand featuresdiscussedand/orillustratedin this manualmay not be applicableto all models.MTDLLCreservesthe right to changeproductspecifications,designsand equipment withoutnotice and withoutincurringobligation.
Attaching the Battery Cables
NOTE:Somemodelsare shippedwith the batterycables alreadyconnected.
NOTE:Thepositivebatteryterminalis markedPos. (+).
Thenegativebatteryterminalis markedNeg. (-).
• Thepositivecable(heavy redwire) is securedto the positivebatteryterminal(+)with a hexbolt and hex nut at thefactory.Makecertainthat the rubberboot coversthe terminalto help protectit fromcorrosion.
• Removethehex boltand hexnut fromthe negative cable.
Removetheblack plasticcover,ifpresent,from the negativebatteryterminaland attachthe negative cable(heavy blackwire)to the negativebattery terminal(-) with thebolt and nut.
NOTE:If the batteryis putinto serviceafter the date shownon top/sideof battery,chargethe batteryas instructedin the MaintainingYour LawnTractorsectionof this manualpriorto operatingthe tractor.
Gas and Oil Fill-up
Thegasolinetank is locatedunderthe hood and hasa capacityof 1-1/2gallons.Donot overfill.
_ flammable and the vapors are explosive.
Never fuel machine indoors or while the engine is hot or running. Extinguish cigarettes, cigars, pipes, and other sources of ignition.
Servicethe enginewith gasolineand oil as instructedin the separateEngineOperator/OwnerManualpackedwith yourtractor.Readinstructionscarefully.
IMPORTANT:Yourtractorisshippedwith motoroil inthe engine.However,you MUSTcheckthe oil levelbefore operating.Be careful notto overfill.
Shipping Brace Removal
WARNING:Make sure the riding mower's engine is off, removethe ignition key,and set the parking brake before removing the shipping brace.
8
Locatethe shippingbrace,if present,and accompanying warningtag foundon the rightside of the mower, betweenthe dischargechuteand thecuttingdeck.
See Fig.3-2.
Whileholdingthe dischargechute with yourleft hand, removethe shippingbracewith your righthandby graspingit betweenyour thumband indexfingerand rotatingit clockwise.
WARNING: Theshipping brace, used for packaging purposes only, must be removed and discarded before operating your riding mower.
WARNING: Themowing deck is capable of throwing objects. Failure to operate the riding mower without the discharge cover in the proper operating position could result in serious personal injury and/or property damage.
Attaching The Steering Wheel
ifthe steeringwheelforyour tractordid notcome attached,the hardwarefor attachingit hasbeen packed within the steeringwheel,beneaththe steeringwheel cap. Carefullypry off the steeringwheelcapand remove the hardware.
1. With the wheels of the tractor pointingstraight forward, placethe steeringwheeloverthe steering shaft.
2. Placethe washer(with thecuppedsidedown)over the steeringshaftand securewith the hex bolt. See
Fig.3-3.
3. Placethe steeringwheelcap overthe centerof the steeringwheeland pushdownwarduntilit "clicks"into place.
Attaching the Hood Scoop
(if so equipped)
If the hood scoopwas not securedto the hoodof your tractorat the factory,you willfind it in a plasticbag, hangingfrom the throttlelever.
To install:
1. Carefullypivot thetractor hoodforward.
2. Removethe fourscrewsfrom the undersideof the hood scoop.
.
Lineup thefour holesin the hoodscoop with thefour holes visiblethroughthe tractor'shood Iouvres.See
Figure3-4.
4. Whileholdingthe scoop in place,usea 3/8" socket wrench(or boxwrench)to carefullytightenthe scoop ontothe hood.
Do NOTovertighten.
9
Figure 3=2
Figure 3=3
Figure 3-4
YourLawn
Tractor
WARNING
Make sure the riding mower's engine is off, remove the igni- tion key, and set the
parking brake before removing the shipping brace.
The shipping brace, used for packaging
purposes only, must be removed and discarded before
operating your riding mower.
The mowing deck is
capable of throwing objects. Failure to operate the riding mower without the discharge cover in the proper operating
position could result
in serious personal
injury and/or property damage.
the
seat is engaged in
stand themachine
onseat
until fully engaged
i into stopl
NOTE: For shipping reasons seats are either
fastenedtothe tractor
seat's pivot bracket with
a plastiCtie,or mounted
backward tothe pivot bracketl either case; freethe seat form its shipping position and applicable instructions
Figure 3-5
Figure 3-6
Figure 3-7
10
Attaching The Seat
Seatstyles vary bytractormodeland thereare three differentstyles available:
StandardAdjustment
• QuickAdjustment&
• KnobAdjustment
If the seatfor yourtractorwas notattachedat the factory, referto Fig. 3-5, Fig. 3-6, and Fig. 3-7 to identifyyour tractor'sseatstyle and followthe applicableinstructions belowto attachit.
NOTE:Forshippingreasons,seatsare eitherfastened to the tractorseat'spivot bracketwith a plastictie, or mountedbackwardto the pivot bracket.Ineithercase, freethe seat form its shippingpositionand removethe two hex screws(or knobs,on modelsso equipped)from the bottomd seatbeforeproceedingwith applicable instructionsbelow.
Standard Adjustment Seat
1. Positionthe shoulderscrews(foundon the based the seat) insidetheslot openingsin the seat pivot bracket.
Fig. 3-5.
2. Slide the seatslightlyrearwardin the seat pivot bracket,liningup the rearslots in the pivot bracket with the remainingtwo holesin the seat'sbase.
3. Selectdesiredpositionforthe seat,and securewith the two hex screwsremovedearlier.See Fig.3-5.
Quick Adjustment Seat
NOTE:ifyour seatwas shippedmountedbackwardson the seat pivotbracket,pull outthe tab foundon the seat stop and hold itopen whileslidingthe seatoff the seat pivot bracket.See Fig. 3-6.
1. Line up the plasticseat spacerswith the slotsin seat pivot bracket.
2. Slide seat in untilfront seat spacerengagesthe seat stop.See Fig. 3-6.
back on seat until fully engaged into stop.
Knob Adjustment Seat
1. Positionthe shoulderscrews(foundon the based the seat) insidetheslot openingsin the seat pivot bracket.
Fig. 3-7.
2. Slide the seatslightlyrearwardin the seat pivot bracket,liningup the rearslots in the pivot bracket with the remainingtwo holesin the seat'sbase.
3. Selectdesiredpositionforthe seat,and securewith the two knobs removedearlier.See Fig.3-7.
identifying the lVluich Plug
On tractormodelssoequipped,a mulchplug can be foundwithin thecuttingdeck'sdischargeopening.
NOTE:Referto Mulching in the"OperatingYour Lawn
Tractor"sectionof this manualfor moredetailedinformation.
If you'dpreferto operatethe cuttingdeck withoutmulching, simplyremovethe mulch plugby unthreadingthe plasticwing nutwhich fastensit to the cuttingdeck.This
will allowthe clippingsto dischargeout of the discharge openingduringoperation.See Fig.3-8.
Tire Pressure
,_ pressure should be maintained at all times.
The tires on your unitmay be over-inflatedfor shipping purposes.Reducethetire pressurebeforeoperating the tractor.Recommendedoperatingtire pressureis approximately10 p.s.ifor the rear tires & 14p.s.i,for the front tires.Checksidewallof tirefor maximump.s.i.
....,\\\\\
Figure 3=8
Setting Up
WARNING
Maximum tire pres' sure under any circumstances is 30
psi, Equal tire pressure should be maintained at all times,
NOTE: For shipping red: sons, seats are either fastened tothe tractor bracket With a plastic tie, or mounted backwardto the pivot brackeL In either case free the seat form its shipping position and removethe two hex screws(or knobs; on models so equipped) from the bottom of seat before proceedingwith p# le instructions:
11
A
Know Your Lawn Tractor
\
NOTE:Anyreference inthismanualto the
RIGHTor LEFTsideof thetractorisobserved
NOTE:Forshippingreasons,seatsareeither fastenedtothetractor seat'spivotbracketwith a plastictie,or mounted bracket.Ineithercase
freetheseatformits screws(orknobs,on modelssoequipped) fromthebottomofseat
Figure 4=1
NOTE:Steeringwheelnot shownfor clarity
1-If soequipped
A SpeedControlLever/ParkingBrake E ThrottleControlLever
B Clutch-BrakePedal
C Shift Lever
F
G
IgnitionSwitchModule
DeckLift Lever
D ChokeControl1H PTO(Blade Engage)Lever
NOTE:Anyreferencein this manualto the RIGHTor LEFTside of the tractoris observedfrom operator'sposition.
12
m
Throttle Control Lever
Thethrottlecontrol leveris locatedon the rightside of thetractor'sdash panel.This levercontrolsthe speed of the engineand,on somemodels,when pushedall theway forward,the chokecontrol also.Whenset ina givenposition,the throttlewill maintaina uniformengine speed.See Fig. 4-2.
iMPORTANT:Whenoperatingthetractorwith the cutting deck engaged,be certainthat the throttleleverisalways in the FAST(rabbit)position.
Choke Control
On some models,movingthe throttleleverall the way forward activatestheengine'schoke control.On all othermodels,the chokecontrolcan be foundon the leftside of thedash panel and isactivatedby pullingthe knoboutward.Activatingthe
chokecontrolclosesthe choke plateon the carburetorand aids
in startingthe engine.Referto Starting The Engine on page 16of this manualfor detailedstartinginstructions.
F
FAST
SLOW
_A
Off
Ignition Switch
|l
CHOKE
FAST
SLOW
Figure 4=2
On/Lights key intothe ignitionswitchand turnclockwiseto the
STARTposition.Releasethe key intothe ON position onceengine hasfired. See Fig.4-3A.
ignition Switch Module (If So Equipped)
Start and turnclockwiseto the STARTposition.Releasethe
key intothe NORMALMOWINGMODEpositiononce theengine hasfired.
Tostop the engine,turn theignitionkey counterclockwise to the OFF position.See Fig. 4-3B.
WARNING: Never leave a running machine unattended. Always disengage PTO,move shift lever into neutral position, set parking brake, stop engine and remove key to prevent unintended starting.
iMPORTANT:Priorto operatingthetractor,referto both
Safety interlock Switches on page 14and Starting
The Engine on page 16 of this manualfordetailed
Stop
Position operatingthe tractorin REVERSECAUTIONMODE.
Deck Lift Lever
Foundon yourtractor'srightfender,the deck lift leveris usedto changetheheightof the cuttingdeck.To use, movethe leverto the left,then placein the notchbest suitedfor yourapplication.
©
Start
Position
Figure 4-3
Parking Brake
To set the parkingbrake,fully depressthe dutch-brake pedal.Movethe speedcontrolleverall theway downand
intothe parkingbrakeposition.Releasethe clutch-brake pedalto allowthe parkingbraketo engage.
To releasethe parkingbrake,depresstheclutch-brake pedaland movethe speedcontrolleveroutof the notchesto thedesiredposition.Releasethespeed
control leverand the clutch-brakepedal.
_ever leave a running machine unattended,
Always disengage
PTO, move shift lever nto neutral position, set parking brake, stop engine and remove key to prevent unintended starting:
MPORTANT
Prior_o0 tractorirefe!to both
Safety Interlock ;
Switches onpage
14. and starting The
onpage16
detailedinstraCtions regardingtheIgnition
Switch Module and operating the tractor in
REVERSE CAUTION
ODEi
13
FRRWARD
NUETRAL
NOTE:Lawntractorsvary by modeland are availablewith eithera 6- or 7-speedcontrollever.
PTO (Blade Engage) Lever
Foundon the tractor'srightfender,the
PTO(bladeengage)leveris usedto engagepowerto the cuttingdeck or other(separatelyavailable)attachments.
Tooperate,movethe leverall the way forward.Movingthe leverall the way rearwardintothe PTOOFF position disengagespowerto the cuttingdeck/ attachment.
NOTE:The PTO(blade engage)lever mustbe in the disengaged(PTOOFF) positionwhenstartingthe engine.
!
"O /"
_3 m
_4
"o
,t5 o
!2
REVERSE_
Safety Interlock Switches
This tractorisequippedwith a safetyinterlocksystem
Figure 4-4
WARNING
NOTE:Theparkingbrakemustbe set if theoperator leavesthe seatwith the engine runningor the engine willautomaticallyshut off.
Dooctop rato
Clutch-Brake Pedal tractor ifthe interlock
ing: This system was
Theclutch-brakepedal is locatedon the left sideof the lawntractor,along the runningboard.Depressthe
clutch-brakepedalpartway downwhenslowingthe tractorbychangingspeeds(Referto SpeedControl
Lever).Depressthe pedalall theway downto engage
aodproteot oo,
NOTE:Thepedal mustbe depressedto startthe engine.
Referto SafetyInterlockSwitcheson page 14.
shouldever malfunction,do not operatethe tractor.
Contactan authorizedMTDservicedealer.
Thesafety interlocksystempreventstheengine fromcrankingor startingunlessthe parkingbrakeis engaged,andthe PTO(BladeEngage)leveris in the disengaged(OFF) position.
* Theenginewill automaticallyshut off if the operator leavesthe seat beforeengagingthe parkingbrake.
* Theenginewill automaticallyshut off if the operator leavesthe tractor'sseat with the PTO(Blade Engage) leverin the engaged(ON) position,regardlessof whetherthe parkingbrakeis engaged.
* Theenginewill automaticallyshut off if the operator engagesthe PTOwith the parkingbrakeON.
NOTE: The parking operator leaves the seat with theengine ning or the engine wi automatiCallyshut ofL
NOTE: The PTO (Blade
Engage) lever must be inthe disengaged (PTO
OFF) position when starting the engine:
IMPORTANT
Never force the shift lever:Do ngso may result in serious damage to the tractorls transmissionl
Shift Lever
The shiftleverislocatedon the left sideof thefender and hasthree positions,FORWARD,NEUTRALand
REVERSE.The brakepedal mustbe depressedand thetractor mustnotbe in motionwhenthe movingshift lever.See Fig. 4-4.
IMPORTANT:Neverforce the shiftlever.Doingso may result inseriousdamageto the tractor'stransmission.
Speed Control Lever
The speedcontrollever,locatedon the leftside of thetractor'sdash console,allowsyouto regulatethe groundspeedof the lawntractor.To
use, depressthe clutch-brakepedal and movethe leveroutof the parking brakenotchand forwardto increase thetractor'sgroundspeed.Whena
desiredspeedhas been reached, releasethe leverintoan appropriate notchto maintainthat speed.
Toslow thetractor'sgroundspeed, depressthe clutch-brakepedaland movethe speedcontrolleverrearward and releaseit intoa notch.
0
0
PARK
BRAKE
Models without Reverse Caution Mode
,, Theenginewill automaticallyshut off if the PTO(Blade
Engage)leveris movedinto the engaged(ON) position with the shift leverin Reverse.
Models with Reverse Caution Mode
* With the ignition tion, the enginewillautomaticallyshut off if the PTO
(Blade Engage)leveris movedintothe engaged(ON) positionwith the shift leverin Reverse.
_ system was designed for your safety and protection.
14
Reverse Caution
Mode
(Models equipped with ignition switch module)
_il=
CAUTIONMODE.Always look down and behind before and while backing. Do
not operate the tractor when children or others are around. Stop the tractor immediately if someone enters the area.
The REVERSECAUTIONMODE positionof the key switchmoduleallows thetractorto be operatedin reversewith the blades(PTO)engaged.
IMPORTANT:Mowingin reverseis notrecommended,
Tousethe REVERSECAUTIONMODE:
Indicator
Light
Stop
Position
©
Reverse
. PushButton
Reverse
Caution Mode
Position
Start
Position
IMPORTANT:The operatorMUSTbe seatedin the tractorseat.
1, Start the engineas instructedon page 16under
Starting The Engine.
2. Turnthe key from the NORMALMOWING(Green) positionto the REVERSECAUTIONMODE(Yellow) positionof the key switchmodule. See Fig. 4-5.
3. Depressthe REVERSEPUSHBUTTON(Orange,
TriangularButton)at the top, rightcornerof the key
Figure 4-5
To releasethe parkingbrake:
1. Depressthe clutch-brakepedaland movethe speed control leverout of the parkingbrakepositionand into a desiredspeed.
Setting the Cutting Height
1. Selectthe heightpositionof the cuttingdeck by plac-
ingthe deck lift leverinany of the six differentcutting heightnotcheson the rightsideof thefender.
2. Adjustthe deck wheels,ifequipped,sothat theyare between1A-inchand V2-inchabovethe groundwhen the tractoris on a smooth,flat surfacesuch as a driveway.
cornerof the keyswitch modulewill be ONwhile activated.See Fig.4-5.
4. Onceactivated(indicatorlight ON), thetractorcan be drivenin reversewith the cuttingblades(PTO) engaged.
5. Alwayslookdownand behindbeforeand while backingto makesureno childrenare around.
6. After resumingforwardmotion,returnthe key to the
NORMALMOWINGposition.
IMPORTANT:The REVERSECAUTIONMODEwill remainactivateduntil: a. Thekey is placedin eitherthe NORMALMOWING positionor STOPposition.
b. Theoperatorengagesthe parkingbrakebyfully depressingtheclutch-brakepedal and holdingit downwhilemovingthe speedcontrol leverintothe
PARKBRAKEposition.
d_ltlb
NOTE:On modelssoequipped,the deck wheelsare an anti-scalpfeatureof the deck and are notdesignedto supportthe weightof the cuttingdeck.
Referto Levelingthe Deckon page20 of this manual adjustments.
Engaging the Parking Brake
Toengagethe parkingbrake:
1. Fullydepressthe clutch-brakepedaland hold it down with yourfoot.
2. Movethe speedcontrolleverall the way downand intothe parkingbrakeposition.
3. Releasethe clutch-brakepedalto allowthe parking braketo engage.
I
Use extreme caution while operating the tractor in the
REVERSE CAUTION
MODE. Always look down and behind before and while backing. Do not oper- ate the tractor when children or others are around. Stop the tractor immediately if someone enters the area.
Keep hands and feet away from the discharge opening of the cutting deck.
Do not operate the tractor if the
interlock system is malfunctioning. This system was designed for your safety and protection.
15
Starting the Engine
WA I
WARNING
if you strike a foreign
object, stop the engine, disconnect the spark
plugwire(s) and
ground against the engine. Thoroughly
inspectthe machine for any damage. Repair the damage before restart-
ing and operating.
Avoid sudden starts,
ex-cessive speed and sudden stops.
Do not leave the seat
of the tractor without first placingthe PTO
(Blade Engage)lever in the disengaged (OFF)
position, depressing the brake pedal and
engagingthe parking brake. If leaving the tractor unattended, also turn the ignitionkey off and remove the key.
_
Always look down and behind before and while backing up to avoid a back-over
_
This system was designed for your safety and protection.
NOTE:Referto the TRACTORSET=UPon page8 of this manualfor Gasolineand Oil fill-upinstructions.
1. Insertthe tractorkey intothe ignitionswitch.
2. Placethe PTO(Blade Engage)leverin the disengaged(OFF) position.
3. Engagethetractor'sparkingbrake.
4. Activatethe chokecontrol.
5. Turnthe ignitionkey clockwiseto the STARTposition. Afterthe engine starts,releasethe key.It will returnto the ON(or NormalMowing)position.
IMPORTANT:DoNOThold the key in the START positionfor longerthanten secondsat a time. Doingso maycause damageto yourengine'selectricstarter.
6. Afterthe engine starts,deactivatethe chokecontrol and placethe throttlecontrol in the FASTposition.
NOTE:Do NOTleavethe chokecontrolon while operating the tractor.Doingsowill result in a "rich" fuelmixture and causethe engineto run poorly.
Stopping the Engine
_ ARNING: If you strike a foreign object, plug wire(s) and ground against the engine. Thoroughly inspect the machine for any damage. Repair the damage before restarting and operating
1. If the bladesare engaged,placethe PTO(Blade
Engage)leverin the disengaged(OFF)position.
2. Turnthe ignitionkey counterclockwiseto the STOP position.
3. Removethe keyfrom the ignitionswitch to prevent unintendedstarting.
Driving The Tractor
WARNING: Do not leave the seat of the tractor without first placing the PTO
(Blade Engage) lever in the disengaged
(OFF)position, depressing the brake pedal and engaging the parking brake. If leaving the tractor unattended, also turn the ignition key off and remove the key.
Always look down and behind before and while backing up to avoid a back-over accident.
AVOID SERIOUS INJURY OR DEATH
GO UPAND DOWNSLOPES,NOT ACROSS.
AVOIDSUDDENTURNS.
DO NOT OPERATETHE UNIT WHERE IT COULDSLIP OR TIR
IF MACHINE STOPSGOING UPHILL,STOP BLADE(S) AND
BACK DOWNHILLSLOWLY.
DO NOT MOWWHEN CHILDRENOROTHERS AREAROUND.
NEVER CARRYCHILDREN,EVENWITH BLADESOFR
LOOK DOWNAND BEHIND BEFOREAND WHILE BACKING.
KEEP SAFETY DEVICES(GUARDS,SHIELDS,AND SWITCHES)
IN PLACEAND WORKING.
REMOVE OBJECTSTHAT COULDBE THROWNBY THE
BLADE(S).
KNOW LOCATIONAND FUNCTIONOF ALL CONTROLS.
BE SURE BLADE(S) AND ENGINEARE STOPPEDBEFORE
PLACING HANDSOR FEETNEAR BLADE(S).
BEFORE LEAVINGOPERATOR'SPOSITION,DISENGAGE
BLADE(S), PLACETHE SHIFT LEVERIN NEUTRAL,ENGAGE
BRAKE LOCK, SHUT ENGINEOFF AND REMOVE KEY.
READ OPERATOR'S MANUAL
1. Depressthe brakepedalto releasethe parkingbrake and let the pedal up.
2. Movethe throttleleverintothe FAST(rabbit)position.
3. Placethe shift leverin eitherthe FORWARDor
REVERSEposition.
IMPORTANT:Do NOTusethe shift leverto changethe directionof travelwhenthe tractoris in motion.Always
use the brakepedal to bring thetractorto a completestop beforeshifting.
4. Releasethe parkingbrakebydepressingthe clutchbrakepedaland positioningthe speedcontrol leverin desiredposition.
IMPORTANT:First-timeoperatorsshoulduse speedpositions 1 or 2. Becomecompletelyfamiliarwith the tractor's operationand controlsbeforeoperatingthetractorin higher speedpositions.
.
Releaseclutch-brakepedal slowlyto put unitinto motion.
6.
The lawntractoris broughtto a stop by depressingthe clutch-brakepedal.
NOTE:Whenoperatingthe unitinitially,therewill be little differencebetweenthe highesttwo speedsuntilafter the belts haveseatedthemselvesintothe pulleysduringthe break-inperiod.
16
WARNING: Before leavingthe operator's
positionfor any reason,disengage the blades, place the shift lever in neutral, engage the parking brake, shut engine off and remove the key.
iMPORTANT:Whenstoppingthe tractorfor any reason whileon a grass surface,always:
1. Placethe shiftleverin neutral,
2. Engagethe parkingbrake,
3. Shutengineoff and removethe key.
Doingso will minimizethe possibilityof havingyourlawn
"browned" byhot exhaustfrom yourtractor'srunning engine.
If unit stalls with speedcontrolin high speed,or if unit will notoperatewith speedcontrol leverin a low speed position,proceedas follows:
1. Placeshift leverin NEUTRAL.
2. Restartengine.
3. Placespeedcontrolleverin highestspeedposition.
4. Releaseclutch-brakepedalfully.
5. Depressclutch-brakepedal.
6. Placespeedcontrolleverin desiredposition.
7. Placeshift leverin eitherFORWARDor REVERSE, and follownormaloperatingprocedures.
o o
Driving On Slopes
Referto the SLOPEGAUGEon page3 to helpdetermine slopeswhereyoumay operatethe tractorsafely.
WARNING: Do not mow on inclines with a slope in excessof 15degrees (a rise of approximately 2-1/2 feet every 10 feet). The tractor could overturn and cause serious injury.
Mow up and downslopes,NEVERacross,
Exerciseextremecautionwhenchangingdirectionon slopes,
Watchfor holes, ruts,bumps,rocks,or otherhidden objects.Uneventerraincouldoverturnthe machine,
Tallgrasscan hide obstacles.
Avoidturns whendrivingon a slope. If a turn mustbe made,turndownthe slope. Turningup a slopegreatly increasesthe chanceof a roll over,
Avoidstoppingwhendrivingup a slope, if it is necessaryto stop whiledrivingup a slope, startup smoothlyand carefullyto reducethe possibilityof flippingthe tractoroverbackward.
Engaging the Blades
Engagingthe PTO(BladeEngage)transferspowerto the cuttingdeck or other(separatelyavailable)attachments.
Toengagetheblades, proceedas follows:
1. Movethe throttlecontrol leverto the FAST(rabbit) position.
2. Graspthe PTO(Blade Engage)leverand pivot it all theway forwardintothe engaged(ON)position.
3. Keepthe throttleleverinthe FAST(rabbit)position forthe mostefficient useof the cuttingdeck or other
(separatelyavailable)attachments.
iMPORTANT:Modelswith ReverseCaution Mode:
Theenginewill automaticallyshutoff if the PTOis engagedwith the shift leverinpositionfor reversetravel with theignitionkey in the NORMALMOWINGposition.
Modelswithout ReverseCaution Mode:
The PTO(Blade Engage)levermustbe in the disengaged(OFF)positionwhenstartingthe engine,when travelingin reverse,and if theoperatorleavesthe seat.
Referto SafetyInterlockSwitcheson page 14.
Using the Deck Lift Lever
Toraisethe cuttingdeck,movethe deck lift leverto theleft, then placeitin the notchbest suitedfor your application.Referto SettingThe CuttingHeightearlierin this section.
WARNING
Do not mow on
inclineswith a slope
in excess of 15 degrees (a rise of approximately 2-1/2 feet every 10 feet).
The tractor could
overturn and cause serious injury.
17
Mowing
_ ARNING:Tohelp avoid blade contact or helpers, children and pets at least 75feet from the machine while it is in operation.
Stop machine if anyone enters the area.
cuttingdeck with yourtractor:
Your Lawn
Tracto
WARNING
To help avoid blade contact or a thrown object injury, keep bystanders, helpers, children and pets at
least 75 feet from the machine while it is in
operation. Stop ma= chine if anyone enters the area.
Planyour mowing
pattern to avoid discharge of mated-
DiStoward roads, sidewalks, bystanders and the like. Also,
avoid discharging material against a wall or obstruction which may cause discharged material to ricochet back toward the operator.
_ WARNING: Plan your mowing pattern roads, sidewalks, bystanders and the like.
Also, avoid discharging material against a wall or obstruction which may cause
discharged material to ricochet back toward the operator.
• Do notmow at high groundspeed,especiallyif a mulch kit or grass collectoris installed.
• Forbest resultsit is recommendedthat the firsttwo laps be cut with the dischargethrowntowardsthe center.After thefirst two laps, reversethe direction to throwthe dischargeto the outsidefor the balance of cutting.This will givea betterappearanceto the lawn.
Do notcut thegrass too short.Shortgrass invites weedgrowthand yellowsquicklyin dry weather.
• Mowingshouldalwaysbe donewith the engine at full throttle.
• Underheavierconditionsit may be necessaryto go backoverthe cut areaa secondtime to get a clean cut.
• Do NOTattemptto mow heavybrushand weedsand extremelytall grass.Yourtractoris designedto mow lawns,NOTclearbrush.
• Keepthe bladessharpand replacethe bladeswhen worn. Referto Cutting Blades on page 25 of this manualfor properblade sharpeninginstructions.
WA
G
•
•
•
•
•
•
•
•
•
•
•
AVOID SERIOUS INJURY OR DEATH
GO UP AND DOWNSLOPES,NOT ACROSS.
AVOID SUDDENTURNS.
,,
DO NOT OPERATETHE UNIT WHERE IT COULDSLIP
OR TIR
IF MACHINE STOPSGOING UPHILL,STOP BLADE(S)
AND BACK DOWNHILLSLOWLY.
DO NOT MOWWHEN CHILDRENOR OTHERSARE
AROUND.
NEVER CARRYCHILDREN,EVENWITH BLADESOFR
LOOK DOWNAND BEHINDBEFOREAND WHILE
BACKING.
KEEP SAFETY DEVICES(GUARDS,SHIELDS,AND
SWITCHES) IN PLACE ANDWORKING.
REMOVE OBJECTSTHAT COULD BE THROWNBY
THE BLADE(S).
KNOW LOCATIONAND FUNCTIONOF ALL CON
TROLS.
BE SUREBLADE(S) AND ENGINEARE STOPPED
BEFORE PLACINGHANDSOR FEETNEAR
BLADE(S).
BEFORE LEAVINGOPERATOR'SPOSITION,DISEN
GAGE BLADE(S), PLACETHE SHIFT LEVERIN
NEUTRAL, ENGAGEBRAKELOCK, SHUT ENGINE
OFF AND REMOVE KEY.
READ OPERATOR'S MANUAL
18
Mulching
Selectmodelscome equippedwith a mulch kit which tractor,ina processof recirculatinggrass clippings repeatedlybeneaththe cuttingdeck.Theultra-fine clippingsarethen forcedback intothe lawnwherethey act as a naturalfertilizer.
Observethe followingpointsfor the best resultswhen mulching:
• Neverattemptto mulchif the lawnisdamp.Wet grass tendsto stickto theundersideof the cuttingdeck preventingpropermulchingof the clippings.
Do NOTattemptto mulch morethan 1/3the total heightof the grassor approximately1-1/2inches.
Doingso willcause theclippingsto clump up beneath thedeck and notbe mulchedeffectively.
• Maintaina slow groundspeedto allowthe grass clippingsmoretime to effectivelybe mulched.
• Alwayspositionthe throttlecontrol leverin the FAST
(rabbit)positionand allowit to remaintherewhile mowing.Failingto keepthe engineat full throttle placesstrainon the tractor'sengineand doesnot allowthe bladesto properlymulchgrass.
NOTE:It isnot necessaryto removethe dischargechute to operatethe mowerwith the mulchkit installed.
Figure 4-6
Headlights
• On somemodels,the lampsare ONwheneverthe tractor'sengineis running.On othermodels,the lampsare ONwheneverthe ignitionkey is movedout of the STOPposition.
• Onall models,the lampsturn OFF whenthe ignition keyis movedto the STOPposition.
i_ ii i i mower without the propedy attached,
_ WARNING: Never operate the mower attached.
Tooperatethe cuttingdeck withoutmulching,simply removethe mulch plug byunthreadingthe plasticwing nutwhich fastensit to the cuttingdeck.This will allowthe clippingsto dischargeout the side.See Fig.4-6.
T ¸¸¸
NOTE: This 0
ManUa covers a range of product specifications for VariOusmodels: characteristics and features discussec andlor Ilustratedin his manual may not be
_tpplicableto all modelsl
MTD LLCreserves the rightto change product specifications designs and equipmentWithout not ce and WithoutincUr_ ring obligation.
i
19
WARNING
Neverattemptto
make any adjust- ments while the engine is running, except where specif
Figure 5=1
Figure 5=2
,_ except where specified in the operator's manual.
Leveling the Deck
NOTE:Checkthe tractor'stire pressurebeforeperforming anydeck levelingadjustments.Referto Tires on page24 for informationregardingtire pressure.
Front To Rear
Thefront of the cuttingdeck is supportedbya stabilizer bar that canadjustedto levelthe deck from frontto rear.
Thefront of the deck shouldbe between1/4-inchand
3/8-inch lowerthanthe rear of the deck.Adjustif
necessaryas follows:
1. With the tractorparkedon a firm,levelsurface,place the deck lift leverin the top notch(highestposition) and rotatethe blade nearestthe dischargechute so that it is parallelwith the tractor.
2. Measurethe distancefrom the front ofthe bladetip to the groundand the rearof the blade tip to the ground.
Thefirst measurementtakenshouldbe between
1/4"and 3/8" less than thesecond measurement.
Determinethe approximatedistancenecessaryfor properadjustmentand proceed,if necessary,to the next step.
3. Locatethejam nutand lock nut on the front sideof the stabilizerbracket.See Fig. 5-1.After looseningthejam nut:
Tightenthe lock nutto raisethefront of the deck;
Loosenthe lock nut to lowerthefront of the deck.
4. Retightenthe jam nut loosenedearlierwhen proper adjustmentis achieved.
Side to Side
If the cuttingdeck appearsto be mowingunevenly,a side to side adjustmentcan be performed.Adjustif necessary as follows:
.
With the tractorparkedon a firm,levelsurface,place the deck lift leverin the top notch(highestposition) and rotateboth bladesso that they are perpendicular with the tractor.
2. Measurethe distancefrom the outsideof the left blade tip to the groundand the distancefrom theoutside of the rightblade tip to theground.Bothmeasurements
takenshouldbe equal. If they'renot, proceedto the next step.
3. Loosen,butdo NOT remove,the hexcap screwon the left deck hangerbracket.See Fig. 5-2.
4. Balancethe deck by usinga wrenchto turn the adjustmentgear (foundimmediatelybehindthe hex cap screwjust loosened)clockwise/upor counterclockwise/down.Thedeck is properlybalancedwhen bothblade tip measurementstakenearlierare equal.
5. Retightenthe hex capscrewon the left deck hanger bracketwhenproperadjustmentis achieved.
2O
Parking Brake Adjustment
WARNING:Never attempt to adjust the brakes while the engine is running. Always disengage PTO,move shift lever into neutral position, stop engine and remove key to prevent unintended starting.
If the tractordoesnot cometo a completestop whenthe brakepedal is completelydepressed,or if the tractor's rearwheelscan roll with the parkingbrakeapplied,the brakeis in need of adjustment.See an authorizedMTD
Service Dealerto haveyourbrakesproperlyadjusted.
Seat Adjustment
NOTE:For shippingreasons,seatsare eitherfastened to the tractorseat'spivotbracketwith a plastictie, or mountedbackwardto thepivot bracket.Ineither case, free the seatform its shippingpositionand removethe two hexscrews(or knobs,on modelssoequipped)from the bottomof seat beforeproceedingwith applicable instructions.
_ stop, stand behind the machine and pull back on seat until fully engaged into stop.
Standard Seat
Toadjust the positionof the seat,loosenthe two hex screwson the bottomof the seat.Slide the seatforward or backwardas desired.Refightenthe two screws.See
Fig.5-3.
Knob Adjustment Seat (if so equipped)
Toadjust the positionof the seaton modelsso equipped, loosenthe two knobson the bottomof theseat. See
Fig.5-4. Slide the seatforwardor backwardas desired.
Retightenthe two knobs.
Quick Adjust Seat (if so equipped)
Toadjust the positionof the seaton modelsequipped with a seat adjustmentlever,movethe seatadjustment lever(locatedunder theseat) to the left and slidethe seat forwardor rearward.See Fig. 5-5. Makesureseat is locked intopositionbeforeoperatingthe tractor.
Figure 5=3
Figure 5=4
Adjusting
Figure 5=5
WARNING
Never attemptto adjust the brakes while the engineis running.
Alwaysdisengage
PTO,move shift lever
intoneutral position,
stopengine and remove key to prevent unintended starting.
Before operating this machine, make sure the seat is engaged in the seat stop, stand behind the machine and pull back on seat until fully engaged intostop.
NOTE: For shipping reasons, seats are either fastened to the tractor
;eat's pivot bracket with
olastic tie, or mounted backward to the pivot bracket. In either case, free the seat form its shipping position and removethe two hex screws (or knobs, on models so equipped) from the bottom of seat before proceeding with applicable instructions.
21
4. Servicethe oil filter (if so equipped)as instructedin the separateEngineOperator/OwnerManualpackedwith yourunit.
Performthe abovestepsinthe oppositeorder afteroil has finisheddraining.
EngineOperator/OwnerManualpackedwith your unit.
IMPORTANT:Referto the EngineOperator/Owner
Tract or
WARNING
\ quantityand properweight of motoroil.
Air Cleaner
Servicethe pre-cleaner,if soequipped,and cartridge/air cleanerelementas instructedin the EngineOperator/
OwnerManualpackedwith your unit.
Spark Plug(s)
Thespark plug(s)shouldbe cleanedand thegap reset oncea season.Sparkplug replacementis recommended at the startof each mowingseason.Referto the Engine
Operator/OwnerManualfor correctplug type and gap specifications.
Lubrication aBeforeperforming ny maintenance or repairs, disengage
PTO, move shift lever into neutral position,
set parking brake, stop engine and remove key to prevent unintended starting.
_S Single
Figure 6=1
........
J
Before lubricating, repairing, or inspect-
ing, always disengage
PTO, move shift lever into neutral position,
set parking brake, stop engine and remove key to prevent unintended starting.
_ move shift lever into neutral position, set parking brake, stop engine and remove key to prevent unintended starting.
Engine
Refer to the Engine Operator/Owner Manualfor
enginemaintenance instructions.
Checkengine oil level beforeeachuseas instructed
inthe EngineOperator/OwnerManualpackedwith your unit. Follow the instructionscarefully.
Changing Engine Oil
Fordrainingoil from the engine'scrankcaseof select modeltractors,a plasticoil drain sleeveis packedwith this Operator'sManual.Todrain the oil, proceedas follows:
.
Unscrewthe oil fill capand removethe dipstickfrom theoil fill tube.
2.
Snapthe small end of oil drain sleeveontothe oil sump.See Fig.6-1.
3.
Removedrain plug and drain oil intoa suitable containerwith a capacityof no less than64 oz.
,_ shift lever into neutral position, set parking brake, stop engine and remove key to prevent unintended starting.
Engine
Lubricatethe enginewith motoroil as instructedin the
EngineOwnerManualpackedwith yourunit.
Pivot Points & Linkage
Lubricateall the pivotpoints on the drivesystem,parking brakeand lift linkageat least oncea seasonwith lightoil.
Rear Wheels
The rearwheelsshouldbe removedfrom the axles once a season.Lubricatethe axles and the rimswell with an all-purposegreasebeforere-installingthem.
Front Axles
Eachend of the tractor'sfront pivot bar may be equipped with a greasefitting. Lubricatewith a greasegun after
every25 hoursof tractoroperation.
22
Cleaning the Engine And Deck
Anyfuel or oil spilledon the machineshouldbe wiped off promptly.DoNOT allowdebristo accumulatearound thecoolingfins of the engineor on any otherpart of the machine.
iMPORTANT:The useof a pressurewasherto clean yourtractoris NOT recommended.It may causedamage to electricalcomponents,spindles,pulleys,bearingsor theengine.
Deck Wash System
TM
A hexplug can be foundon yourtractor'sdeck surface.
See Fig. 6-2.
This plug canbe replacedwith a waterport to be usedas to rinsegrassclippings fromthe deck'sundersideand preventthe buildupof corrosivechemicals.
NOTE:Referto page 28 for informationregardingthis
HexPlug k,,,, soriesfor yourtractor.
Cutting Deck Removal
NOTE:Modelsequippedwith a 38-inchdeck have one deck idler pulley.Modelsequippedwith a 42- and
46-inchdeck havetwo deck idler pulleys.
To removethecuttingdeck, proceedas follows:
1. Placethe PTO(Blade Engage)leverin the disengaged(OFF) positionandengagethe parkingbrake.
2. Lowerthe deck by movingthedeck lift leverintothe bottomnotchon the rightfender.
3. Removethe beltfrom aroundthetractor'sengine pulleyand idler pulley(s).Referto Changingthe Deck
Belton page26 for detailedinstructions.
4. Lookingat the cuttingdeck from theleft sideof the tractor,locatethe hair pin clip that securesthe deck supportrod on the rear left sideof the deck.
See Fig. 6-3.
5. Removethe hairpin clipthat securesthedeck supportrod, and carefullyremovethe deck support fromthe deck lift arm.
6. Repeattheabovestepson thetractor'srightside.
7. Movethe deck lift leverintothe top notchon the right fenderto raisethe deck lift arms up and out of the way.
8. Carefullyremovethe PTOcablefrom the rearof thecutting deck by removingthe hair pinclip which securesit. Removethe springfrom the deck idler bracket.See Fig.6-4.
9. Gentlyslidethe cuttingdeck towardthe frontof the tractorallowingthe hookson the deck to release themselvesfromthe deck stabilizerrod.
10.Gentlyslidethe cuttingdeck (from the rightside)out from underneaththe tractor.
F
23
Figure 6=2
Figure 6=3
Figure 6-4
Your LaWn
i
NOTE: Models equippedwith a 38-inch deck have one deck idler pulley. Models
)quipped with a 42- and
46-inch deck have two deck idler pulleys.
Jump Starting
Tires
_ ARNING:Never exceed the maximum of tire.
Ma| !ltal
The recommendedoperatingtire pressureis:
• Approximately10 psifor the rear tires
n !ng
• Approximately14psi for the fronttires
|_iAlllt
,, ,_,,,,_ _ ,,,,,_,_vv,, •
Tractor
MPORTANTI aefertothetresdewa forexactt re manufacturersrecommendedor maximumpsi. Do not overinflate.Uneventirepressurecouldcausethe cutting deck to mow unevenly.
Battery
The batteryis sealedand is maintenance-free.Acid
levelscannotbe checked.
_ the screwdriver from shorting against the frame.
IMPORTANT:Neverjump yourtractor'sdead batterywith the batteryof a runningvehicle.
1. Connectend of one jumpercableto the positive terminalof the good battery,thenthe otherend to the positiveterminalof the dead battery.
2. Connectthe otherjumpercable to the negative terminalof the good battery,thento the frame of the unit with the dead battery.
3. Start the tractor as instructedon page 15.
WARNING
Never exceed the maximum inflation
pressure shown on the sidewall of the tire.
Batteries give off an explosive gas while
charging. Charge
battery in a well ventilated area and keep away from an open flame or pilot light as on a water heater, space heater, furnace, clothes dryer or other gas appliances.
Always use a fuse
with the same amperage capacity for replacement.
• Alwayskeepthe batterycablesand terminalsclean and freeof corrosivebuild-up.
• Aftercleaningthe batteryand terminals,apply a light coat of petroleumjelly or greaseto bothterminals.
• Alwayskeepthe rubberboot positionedoverthe positiveterminalto preventshorting.
IMPORTANT:If removingthe batteryfor anyreason, disconnectthe NEGATIVE(Black)wire fromit'sterminal first, followedby the POSITIVE(Red)wire. When re-installingthe battery,alwaysconnectthe POSITIVE
(Red)wire itsterminalfirst, followedby the NEGATIVE
(Black)wire. Be certain that thewires are connectedto thecorrectterminals;reversingthemcouldchangethe polarityand result in damageto your engine'salternating system.
Charging
IMPORTANT:Whenchargingyour tractor'sbattery,use onlya chargerdesignedfor 12Vlead-acidbatteries.
Readyourbatterycharger'sOwner'sManualpriorto chargingyourtractor'sbattery.Alwaysfollow itsinstructionsand heeditswarnings.
If yourtractorhasnot been put intousefor an extended periodof time,chargethe batteryas follows:
• Setyour batterychargerto delivera maximumof 10 amperes.If your batterychargeris automatic,charge the batteryuntilthe chargerindicatesthat chargingis complete.
NOTE:If the chargeris notautomatic,chargefor no fewerthaneight hours.
_ battery could explode.
Cleaning
Cleanthe batteryby removingit fromthe tractorand washingwith a bakingsodaand water solution.If necessary,scrapethe batteryterminalswith a wire brushto removedeposits.Coatterminalsand exposedwiringwith greaseor petroleumjelly to preventcorrosion.
Battery Failures
Somecommoncausesfor batteryfailureare:
• incorrectinitialactivation • undercharging
• overcharging • corrodedconnections
• freezing
These failures are NOTcovered by your tractor's warranty.
Fuse
One 20 AMPfuse is installedin yourtractor'swiring harness to protectthe tractor'selectricalsystemfrom damage causedby excessiveamperage.
If the electricalsystemdoes notfunction,or yourtractor's enginewill notcrank,first checkto be certainthat the fuse has notblown. It can be foundunder thehood mounted behindthe dashpanelon the rightside.
_
_ well ventilated area and keep away from an open flame or pilot light as on a water heater, space heater, furnace, clothes dryer or other gas appliances.
24
Cutting Blades
,_ spark plug wire(s) and ground against the engine to prevent unintended starting before removing the cutting blade(s) for sharpening or replacement. Protect your hands by using heavy gloves or a rag to grasp the cutting blade.
WARNING: Periodically inspect the blade spindles for cracks or damage, especially if you strike a foreign object. Replace immediately if damaged.
The bladesmay be removedas follows.
1. Removethe deck from beneaththe tractor,(referto
CuttingDeckRemovalon page23) thengently flip thedeck overto expose its underside•
2. Placea blockof wood betweenthe centerdeck housing baffle and the cuttingbladeto act as a stabilizer.
See Fig. 6-5.
3. Removethe hexflangenutthat securesthe bladeto the spindleassembly.See Fig.6-5.
4. Toproperlysharpenthe cuttingblades,removeequal amountsof metalfrom bothends of the bladesalong thecutting edges,parallelto the trailingedge,at a
250to 300angle.
IMPORTANT:If the cuttingedgeof the blade hasalready been sharpenedto within 1 5/8" from theedge,or if any metal separationis present,replacethe bladeswith new ones. See Fig.6-6.
• It is importantthat eachcuttingblade edge be ground equallyto maintainproperblade balance•
• A poorlybalancedbladewill causeexcessive vibrationand maycausedamageto thetractorand result in personalinjury.The bladecan be testedby balancingit on a roundshaftscrewdriver.Grind metal fromthe heavysideuntil it balancesevenly.
• Whenreplacingtheblade,be sureto installthe blade with the sideof the blade marked"Bottom" (or with a part numberstampedin it) facingthe groundwhen the moweris in the operatingposition.
IMPORTANT:Usea torquewrenchto tighten the blade spindlehexflangenutto between70 foot-poundsand 90 foot-pounds.
f f
Figure 6-5
Idlerpulleys
\\\\
Maintaining
WARNING
Be sure to shut the engine off, remove
ignition key, disconnect the spark plug wire(s) and ground against the engine to prevent unintended irting before removthe cutting blade(s) for sharpening or replacement. Protect your hands by using heavy gloves or a rag to grasp the cutting blade.
Periodically inspect the blade spindles for
cracks or damage, especially ifyou strike a foreign object.
_laceimmediately if damaged.
25
Idler pulleynuts
Figure 6-7
WARNING
Be sure to shut the
engine off, remove
ignition key, d iscon- nect the spark plug
wire(s) and ground against the engine to prevent unintended starting before remov=
ing the belt.
Changing the Deck Belt
WARNING:Be sure to shut the engine
off,removeignition key,disconnect the spark plug wire(s) and ground against the engine to prevent unintended starting before removing the belt.
All belton yourtractorare subjectto wearand shouldbe replacedif any signsof wearare present.
IMPORTANT:TheV-beltfoundon yourtractorare speciallydesignedto engageand disengagesafely.A
substitute(non-OEM)V-beltcan be dangerousby not disengagingcompletely.Fora properworkingmachine, usefactory approvedbelts.
Tochangeor replacethe deck belt on yourtractor, proceedas follows:
1. Lowerthe deck by movingthe deck lift leverintothe bottomnotchon the rightfender.
2. Removethe beltguardsby removingthe self-tapping screwsthat fastenthem to the deck.
.
Removethe beltkeeperrodfrom aroundthe engine pulley.
4.
On the 42-inchdeck only, loosenbut do not remove, the idler pulleynuts.This will enablethe belt to be easily removedfrom the idler pulleys.See Fig. 6-7 on the previouspage.
_1= idler spring or between the belt and a pulley while removing the belt.
5. Removethedeck belt fromaroundall pulleys,including the deck idler pulley.
6. Routethe newbelt as shownin and Fig.6-8, 6-9 or
6-10.
7. Remountthe beltguardsremovedearlier.
Changing the Lower Deck Belt (46" Decks)
NOTE:Severalcomponentsmustbe removedin orderto changethe tractor'slowerdeck belt. Seean authorized
MTDService Dealerto haveyourlowerdrivebelt replaced or phoneCustomerSupportas instructedon page2 for
Changing the Transmission Drive Belt
NOTE:Severalcomponentsmustbe removedand special tools (i.e.air/impactwrench)in orderto changethe tractor'sdrive belt. Seean authorizedMTDServiceDealer to haveyourdrivebelt replacedor phoneCustomerSupportas instructedon page 2 for informationon orderinga
ServiceManual.
f
Engine Pulley
\
38-Inch Deck
Idler Bracket
Avoid the possibility of a pinching injury. Do not place your fingers
on the idler spring or
between the belt and a pulley while removing the belt.
© o b
Deck Idler Pulley
Figure 6=8
26
..
Idler Bracket
Engine Pulxley
\
©
Deck Idler Pulleys
Figure 6=9
0
Belt Cover Idler Pulleys
Figure 6=10
27
©
J
.j
Tractor
Cleanand lubricatethe tractoras instructed in the Service, Storage &
6: MAiNTAiNiNGYOUR LAWNTRACTORon page 19 Specifications sectionof the EngineOperator/Owner of this manualbeforestoringfor an extendedperiod.
Manualfor properenginecare priorto storingyourtractor.
,_ flame.Allow engine to cool Extinguish cigarettes,cigars,pipes, and other sources of ignition prior to draining fuel.
_ flame, spark or pilot light such as on water heater, furnace, clothes dryer or other gas appliance.
Attachments & Accessories
Attachments
Thefollowingattachmentsand accessoriesare compatiblefor ModelSeries700 LawnTractors.See the retailer from whichyou purchasedyourtractor,an authorizedMTDServiceDealeror phone(800) 800-7310for information regardingpriceand availability.
NOTE:ModelSeries700 LawnTractorsare NOTdesignedfor usewith any type of ground-engagingattachments
(e.g.tiller or plow). Useof this type of equipmentWILL voidthe tractor'swarranty.
WARNING
i Drain fuel only into an approved container outdoors,away
froman openflame.
Allow engine to cool.
Extinguishcigarettes,
cigars, pipes, and other sources of
ignitionpriorto
drainingfuel.
i Neverstorethe imachine orfuel icontainerindoors wherethere isan
openflame, sparkor ipilotlightsuchas on
_waterheater,furnace, iclothesdryeror iothergas appliance.
0EM-190-032 42-inchTwo-stageSnowThrower
0EM-190-116 38/42-inchDeck MulchKit
0EM-190-118 46-inch DeckMulchKit
0EM-190-180
0EM-190-182
0EM-190-183
0EM-190-215
0EM-190-607"
Twin BaggerGrassCollector(for 38/42-inchDecks)
Twin BaggerGrassCollector(for 46-inchDecks)
DeckWheel Kit
RearWheelWeightKit
DeluxeTractorSunshade
0EM-190-658
0EM-190-672
0EM-190-833
Tire Chains,20 x 8 Tires
GrilleGuard(mountson front of tractor)
42-inchFrontDozerBlade
490-900-0025 DeckWash Kit
* Notcompatiblewith tractorsequippedwith a Grass Collector
28
29
ROTATING BLADES CAUSE
SERIOUS INJURY OR DEATH
• DONOTMOWWHENCHILDRENOR
OTHERSAREAROUND
• NEVERCARRYCHILDRENEVENWITH
BLADE(S)OFF.
• LOOKDOWNANDBEHINDBEFORE
ANDWHILEBACKING.
WARNING
This symbol points
out importantsafety
instructionswhich, if not followed,could endangerthe personal safety and/or property of yourself and others.
Readand follow all instructionsin this manual beforeattemptingto operate this machine. Failure to complywith these instructionsmay result in personalinjury.When
you see this symbol.
HEED ITS WARNING!
Your Responsibility
Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.
Trou
Shootin
For repairs beyond the minor adjustments listed here, contact an i authorized service dealer.
Pro bl e m
Eng ne fa s to start
Engineruns erratic
Ca use
1. PTOengaged
2. Sparkplugwire(s) disconnected.
3. Fue tank emptyor stae fue .
4 Chokenot act vated
• "
5. Faultysparkplug.
6. Blockedfuel hne.
7. Engineflooded,
8 Parkingbrakenotengaged.
9. Throttlecontrol levernotin correct startingposition,
1. Unit runningwith CHOKEapplied.
2. Sparkplug wire(s) loose.
3. Blockedfuelline or stale fuel.
4. Ventin gas cap plugged.
5. Wateror dirt in fuel system.
6. Dirty air cleaner.
Remedy
1 PlacePTOknob (or lever)in disengaged(OFF)postion.
2. Connectwire(s) to spark plug(s).
3. F tank w th c can fresh gaso ne
4. Pullout the CHOKEcontrol (if so equipped)or placethe throttle control in CHOKEposition.
5. Clean,adjust gap,or replace.
6. Cleanfuel I ne or replacefuelfilter, if so equipped.
7. Crankenginewith throttle in FAST position.
8. Engageparkingbrake.
9. Placethrottleleverto FAST position.
1. PushCHOKEcontrol(if so equipped)in, or movethe throttle controlout of the CHOKEposition.
2. Connectand tightenspark plug wire(s).
3. Cleanfuel line;fill tank with clean, fresh (less than30 daysold) gasoline.Replacefuel filter,if so equipped.
4. Clearvent or replaceif damaged.
5. Drainfuel tank. Refillwith fresh fuel.
6. Replaceair cleanercartridge/element or clean pro-cleaner,if so equipped.
_ J
3O
Problem
ne overheats
Enginehesitates at high RPM des poor
Excessive
Vibration
Mower wili not mu ch grass
(mode1s equipped with mu/ il'kJt _ a c
Uneven cut
Cause
1} Engineoil levelIowl
21 Air flow restricted.
1. Sparkplug(s)gap tooclose.
i sPark p!ug(s)fou ed faulty or too Wide;
2 Dirtyair c!eaner.
1. Cuttingblade looseor unbalanced.
2. Damagedor bentcuttingblade.
EnginesPeedtoo Iowl
Wet giass
....
3 Excessivelyhigh grass:
........................
4.1Dullblade:
1. Decknotbalancedproperly.
2. Dullblade,
3. Uneventire pressure.
Remedy
Fill crankcasewith properoil.
2. C!eangrassclippingsand debrs from aroundtheengineScoo!ing
fins and blowerhousing.
1. Removesparkplug(s)and reset the gap.
U
Replace Spaikp!ug(S):Set plug(s) gapl
2 Replaceair cleanercartridgeiele_ mentor cleanpre:cleaner,if S0 equipped.
ii ii
1. Tightenbladeand spindle.
Balanceblade.
2. Replaceblade.
li PlaCethrottle Controlin FAST
(rabbit)p0siti°n, watunt atertocut
_ ; :_ .
.
_. Ivlowonce al a nigh cumnghe!gnu, then mow againat desiredheight oimake a nar[owercuttingpathI
&sharpen or replaceblade:
Forrepairs
beyond the minor adjustments listed here, contact an rthorized service dealer.
1. Performside-to-sidedeck adjustment.
2. Sharpenor replaceblade.
3. Checktire pressurein all four tires.
_iii_i_ _ ii_i _ i ii_ ii} i _ ii_ _ i_ii ii I ii _ i iii i ii _ i i i i i
I
31
_FACTORY PARTS
WARNING
a safety feature
isnotfunctioning
properly, do not use
the tractor.Contact
your authorized MTD
servicedealeror call
This Operators
ManUalCoversa range of product specifiCations for Various models:
CharaCteristicsand featuresdiscussed and/or illustrated in this manual may not appliCable to al models:
MTD LLC reservesthe rightto ChangeprOduCt specifications designs and equipmentwithout notiCeand Without incurring obligation.
_
NOTE:Phone(800) 800-7310to order replacementpartsor a completePartsManual(have
your fullmodelnumberand serialnumberready).PartsManualdownloadsare also available free of chargeat www.mtdproducts.com.
DriveBelt (Transmission)
DriveBelt (MowingDeck)38" Deck
DriveBelt (MowingDeck)42" Deck
UpperDriveBelt (MowingDeck)46" Deck
LowerDriveBelt(MowingDeck)46" Deck
DeckBlades(38"Deck- two each)
DeckBlade(42" Deck)
DeckBlade(46" Deck)Center Blade(one ea.)
DeckBlade(46" Deck)Outer Blade(two ea.)
DeckSpindle(38" Deck)
DeckSpindle(42"Deck)
DeckSpindle(46"Deck)DoublePulley(one ea.)
DeckSpindle(46"Deck)(two each)
DeckWheels
Battery(13 hp Tecumseh)
Battery(15.5hp Briggs& Stratton)
Tire(Front) 15x 6 x 6 RoundShoulder
Tire(Front) 15x 6 x 6 SquareShoulder
Tire(Rear)20 x 8 x 8 RoundShoulder
Tire(Rear)20 x 8 x 8 SquareShoulder
HubCap
FuelTankCap
ChokeControl/Cable(TwinCylinderEngines)
ThrottleControl/Cable(SingleCylinderEngines)
DischargeChuteAssembly
754-04001A
754-04062
754-04060B
754-04142
754-0349
742-0610A
742-0616A
742-0612A
742-0611A
618-04197
618-04456
618-04134B
618-0240A
734-0973
725-1704A
725-1737A
734-0864
734-1731
734-1596
734-1730
731-0484A
951-3111
746-1085A
746-04258
931-1032B
32
NOTES
Use this page to make notes and write down important information.
33
CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS
The CaliforniaAir ResourcesBoardandMTDConsumerGroup Inc are pleasedto explainthe evaporativeemissioncontrolsystemwarrantyon your 2007lawn mower.In California,new lawnmowermust be designed,builtand equippedto meet the State's stringentanti-smogstandards.MTDConsumerGroup Inc must warrantthe EECSon yourlawn mowerfor the period of time listedbelow providedthere has beenno abuse,neglector impropermaintenanceof your lawnmower.
Your EECSmay includeparts such as the carburetor,fuel-injectionsystem,the ignitionsystem,catalyticconverter,fuel tanks,fuel lines,fuel caps, valves, canisters,filters,vapor hoses,clamps,connectors,and other associatedemission-relatedcomponents.
Where a warrantable condition exists, MTDConsumer Group Inc will repair your lawn mower at no cost to you includingdiagnosis, parts and labor.
MANUFACTURER'S WARRANTY COVERAGE:
This evaporativeemissioncontrol systemis warrantedfor two years.If any evaporativeemission-relatedpart on yourequipmentis defective,the partwill be repairedor replacedby MTDConsumerGroup Inc.
OWNER'S WARRANTY RESPONSIBILITIES:
Asthe lawn mowerowner,you are responsiblefor performanceof the requiredmaintenancelistedin yourowner'smanual. MTDConsumerGroup Increcommendsthat you retain all receiptscoveringmaintenanceon your lawnmower,but MTDConsumerGroup Inccannot denywarrantysolelyforthe lack of receipts.
Asthe lawn mowerowner,you shouldhoweverbe awarethat MTDConsumerGroup Inc maydeny you warrantycoverageif your lawnmoweror a part has failed dueto abuse,neglect, or impropermaintenanceor unapprovedmodifications.
Youare responsiblefor presentingyourlawn mowerto MTDConsumerGroup Inc's distributioncenteror servicecenter as soonas the problemexists.The
warrantyrepairsshouldbe completedin a reasonableamountof time, not to exceed30 days. If you havea question regardingyour warrantycoverage,you should contactthe MTDConsumerGroup IncService Departmentat 1-800-800-7310.
GENERAL EMISSIONS WARRANTY COVERAGE:
MTDConsumerGroup Incwarrantsto the ultimatepurchaserand eachsubsequentpurchaserthat the lawnmower is: Designed,built andequippedso as to conformwith all applicableregulations;andfree from defectsin materialsand workmanshipthat causethe failure of a warrantedpart to be identicalin all material respectsto that part as describedin MTDConsumerGroup Inc's applicationfor certification.
The warrantyperiod beginson the date the lawnmoweris deliveredto an ultimatepurchaseror first placed into service.The warrantyperiod is two years.
Subjectto certain conditionsand exclusionsas statedbelow,the warrantyon emission-relatedparts is as follows:
1. Any warrantedpart that is not scheduledfor replacementas requiredmaintenancein the writteninstructionssupplied, is warrantedfor the warranty period statedabove. Ifthe part fails duringthe period of warrantycoverage,the part will be repairedor replacedby MTDConsumerGroup Inc accordingto subsection
(4) below. Anysuch part repairedor replacedunderwarrantywill be warrantedfor the remainderof the period.
2. Any warrantedpart that is scheduledonly for regularinspection in the writteninstructionssupplied is warrantedfor the warranty periodstated above.Any such part repairedor replacedunderwarrantywill be warrantedfor the remainingwarrantyperiod.
3. Any warrantedpart that is scheduledfor replacementas requiredmaintenancein the written instructionssuppliedis warrantedforthe period of time beforethe first scheduledreplacementdatefor that part. If the partfails beforethe first scheduledreplacement,the part will be repairedor replacedby MTDConsumer
Group Inc accordingto subsection(4) below.Any such part repairedor replacedunderwarrantywill be warrantedforthe remainderof the period priorto the first scheduledreplacementpointfor the part.
4. Repairor replacementof any warrantedpart underthe warrantyprovisionsherein mustbe performedat a warrantystationat no chargeto the owner.
5. Notwithstandingthe provisionsherein,warrantyservicesor repairswill be providedat all of our distributioncenters that arefranchisedto servicethe subject enginesor equipment.
6. The lawnmowerowner will not be chargedfor diagnosticlaborthat is directlyassociatedwith diagnosisof a defective,emission-relatedwarrantedpart, providedthat such diagnosticwork is performedat a warrantystation.
7. MTDConsumerGroup Inc is liablefor damagesto other engine or equipmentcomponentsproximatelycausedby a failure underwarrantyof any warranted part.
8. Throughoutthe lawnmowerwarrantyperiod stated above,MTDConsumerGroup Incwill maintaina supplyof warrantedparts sufficientto meetthe expected demandfor such parts.
9. Any replacementpart may be usedin the performanceof any warrantymaintenanceor repairsand mustbe providedwithoutchargeto the owner.Such use will not reducethe warrantyobligationsof MTDConsumerGroup Inc.
10. Add-onor modified partsthat are not exemptedbythe Air ResourcesBoardmay not be used.The use of any non-exemptedadd-on or modified parts bythe ultimatepurchaserwill be groundsfor disallowinga warrantyclaims. MTDConsumerGroup Incwill not be liableto warrantfailuresof warrantedparts caused bythe use of a non-exemptedadd-onor modified part.
WARRANTED PARTS:
The repairor replacementof any warrantedpart otherwiseeligiblefor warrantycoveragemay be excludedfrom such warrantycoverageif MTDConsumerGroup
Inc demonstratesthat the lawnmowerhas been abused,neglected,or improperlymaintained,andthat such abuse, neglect,or impropermaintenancewas the directcauseof the needfor repairor replacementof the part. That notwithstanding,any adjustmentof a componentthathas a factory installed,and properly operating,adjustmentlimiting device is still eligiblefor warrantycoverage.Thefollowing emissionwarrantyparts list arecovered: FuelLine,Fuel Line Clamps
MANUFACTURER'S LiMiTED WARRANTY FOR
The limitedwarrantyset forth belowisgivenby MTDLLCwith respect to newmerchandisepurchasedand usedin the UnitedStates,its possessionsand territories.
"MTD"warrantsthis productagainstdefectsin materialand workmanshipfor a periodof two (2) years commencingon the date of original purchaseand will, at its option,repairor replace,freeof charge,any part foundto be defectiveinmaterialsor workmanship.This limitedwarranty shallonlyapply if this product hasbeen operatedand maintained
inaccordancewith the Operator'sManualfurnishedwith the product, and has notbeen subjectto misuse,abuse,commercialuse, neglect, accident,impropermaintenance,alteration,vandalism,theft, fire, water, or damagebecauseof otherperil or naturaldisaster.Damageresulting
fromthe installationor useof any part, accessoryor attachmentnot approvedby MTDfor use with the product(s)coveredbythis manual willvoid yourwarrantyas to any resultingdamage.
Normalwearparts are warrantedto be free fromdefects in materialand workmanshipfor a periodof thirty (30) days fromthe dateof purchase.
Normalwearparts include,butare notlimitedto itemssuch as: batter-
ies,belts,blades,blade adapters,grass bags, riderdeck wheels,seats, snowthrowerskid shoes,shaveplates,auger spiralrubberand tires.
HOW TO OBTAIN SERVICE: Warranty service is available, WITH
PROOF OF PURCHASE, through your local authorized service dealer. To locate the dealer in your area, check your Yellow Pages, or contact MTD LLC at RO. Box 361131,Cleveland, Ohio 44136-
0019, or call 1-800-800-7310 or 1-330-220-4683 or log on to our
Web site at www.mtdproducts.com.
This limitedwarrantydoesnot providecoverageinthe followingcases: a. Theengineor componentparts thereof.These itemsmaycarry a separatemanufacturer'swarranty.Referto applicablemanufacturer's warrantyfor termsand conditions.
b. Log splitterpumps,valves,and cylindershavea separateone year warranty.
c. Routinemaintenanceitemssuch as lubricants,filters, blade sharpening,tune-ups,brakeadjustments,clutchadjustments,deck adjustments,and normaldeteriorationof the exteriorfinish due to useor exposure.
e. MTDdoesnot extendanywarrantyfor productssoldor exported outsideof the UnitedStates,its possessionsand territories,except those soldthroughMTD'sauthorizedchannelsof export distribution.
f. Replacementparts that are notgenuine MTDparts.
g. Transportationchargesand servicecalls.
No impliedwarranty,includingany impliedwarranty of mer-
chantabilityof fitness for a particular purpose,applies after the applicable periodof express written warranty above as to the
parts as identified.No otherexpresswarranty, whetherwrittenor oral, except as mentioned above, givenby any personor entity,
includinga dealeror retailer, with respect to any product,shall
bind MTD.Duringthe periodof the warranty,the exclusiveremedy
is repairor replacementof the productas set forth above.
The provisionsas set forth in this warrantyprovidethe sole and
exclusiveremedy arising from the sale. MTDshallnot be liable for incidentalor consequentialloss or damage including,without limitation, expensesincurredfor substituteor replacementlawn
careservicesor for rentalexpensesto temporarily replacea warranted product.
Somestatesdo notallowthe exclusionor limitationof incidentalor consequentialdamages,or limitationson howlong an impliedwarranty lasts, sothe aboveexclusionsor limitationsmaynot applyto you.
In no event shallrecoveryof any kindbe greaterthanthe amountof the purchasepriceof the productsold.Alterationof safety features of the productshallvoid this warranty. Youassumethe risk and liability for loss,damage,or injuryto you and yourpropertyand/orto others and theirpropertyarisingout of the misuseor inabilityto usethe product.
This limitedwarrantyshallnot extendto anyoneotherthan theoriginal purchaseror to the personfor whomitwas purchasedas a gift.
HOWSTATELAWRELATESTOTHIS WARRANTY: This limited warrantygivesyou specificlegal rights,and youmay alsohaveother rightswhich vary from stateto state.
IMPORTANT:OwnermustpresentOriginal Proofof Purchaseto obtain warrantycoverage.
d. Servicecompletedby someoneotherthanan authorizedservice dealer.
IVITD LLC, P.O. BOX 361131 CLEVELAND, OHiO 44136-0019; Phone: 1=800=800-7310, 1-330=220-4683
GDOO-lO0015 REV. A
Seguridad • Montaje • Funcionamiento • Ajuste • Mantenimiento • Soluci6n de problemas • Garantia
A AL L P A
O
Shift=On=The-Go'" Tractor corta c sped -- Modelos 760-779
IMPORTANTE
LEA CON ATENCION LAS REGLAS DE SEGURIDADY LAS INSTRUCCIONES ANTES DE
PONER LA UNIDAD EN FUNCIONAIVllENTO
Advertencia: Estaunidadest_ equipadacon un motorde cornbusti6ninternoy no debe ser utilizadaen o cercade un terrenoagreste cubiertopor bosque,rnalezaso hierbaexceptoque el sisternade escapedel motorest_ equipadocon un arnortiguadorde chispasque curnpla con las leyeslocaleso estatalescorrespondientes(en caso de existiO.Si se utiliza un arnortiguadorde chispasel operadorIodebe rnantener en condicionesde usoadecuadas.En el Estadode California las rnedidasanteriorrnenternencionadassonexigidaspor ley(Articulo4442 del
C6digode RecursosPOblicosde California).Es posibleque existanleyessirnilaresen otros estados.Las leyesfederalesse aplicanen territorios cercanoo poni_ndoseen contactoconel departarnentode servicios,RO. Box361131Cleveland,Ohio 44136-0019.
IMPRESOEN ESTADOS
UNIDOSDEAME_RICA MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
FORMULARIONO769-02703
11/1/2006
Este Manual del Operador es una parte importante de su nuevo tractor corta c_sped.
Lo ayudar_ a montar, preparar y mantener la unidad para obtener los mejores resultados.
Pot favor, lea y comprenda el contenido del manual.
Indice
Indicador de pendiente ......................................
3
Medidas importantes de seguridad ..................
4
Montaje del tractor corta cesped ......................
8
Funcionamiento del tractor corta cesped ...... 12
Ajuste su tractor corta cesped ........................
20
Mantenimiento del tractor corta c_sped ........ 22
AImacenamiento fuera de temporada/
Aditamentos ......................................................
28
Etiquetas de seguridad ....................................
Soluci6n de problemas ....................................
Garantia .............................................................
29
30
36
B squecla y registro de n mero de modelo
ANTES DE COMENZAREL MONTAJEDEL EQUIPO NUEVO, por favor encuentre la placa de modelo del equipo y copb la informaci6n en la placa de modelo de muestra suministrada, del lado derecho. Puede Iocalizar la placa de modelo mirando debajo del asbnto.
f
Model Number Serial Number
Esta informaci6nes necesaria para tener acceso al sitio web del fabricante y/o para obtener asistencia a tra%s del Departamento de atenci6n al cliente o de un distribuidor de servicios de mantenimientoautorizado.
D www.mtdproducts.com
MTD LLC
P.O.
BOX 361131
CLEVELAND, OH 44136
330-220-4683
800-800-731 Oy
Asistencia al Cliente
Pot favor NO devuelva la unidad al minorista a trav_s del cual la compr6 sin antes ponerse en contacto con Atenci6n a clientes.
En caso de tener problemas para montar este producto o de tener dudas con respecto a los controles, funcionamiento o mantenimientodel mismo, puede solicitar la ayuda de expertos. Elija entre las opciones que se presentan a continuaci6n:
1. Visite www.mtdproducts.com.
2. Comuniquese por telefono con un representante de asistencia al cliente al 1 (800) 800-7310.
3. El fabdcante del motor es el responsable de todas las cuestiones relacionadascon el rendimiento, la potencia de salida, las especificaciones,la garantia y el servicio de mantenimiento.Por favor consulte el Manual del propietario/operador del fabricante del motor, que se entrega pot separado con su unidad.
2
0 t'--
GO
(D
0 o3
(:D
GO
0
(D
(D
0
(D o5
O9
E
,_
225
O
E
O
O
O
N
"r-
225
Z o
C o
O t'_
O
-'O e_
O
O
O.-
O
Mire y mantenga este nivel con un arbol vertical...
o la esquina de un edificio...
o una cerca
I
I
I
I
| _
de 15.0
|
15°
Medidas
ADVERTENClA: El escape del motor de este producto, algunos de sus componentes y algunos componentes del vehiculo contienen o liberan sustancias quimicas que el estado de Californiaconsidera que pueden producirc_.ncer, defectos de nacimientou otros problemas reproductivos.
PELIGRO: Esta m_.quinafue construida para set operada de acuerdo con las reglas de seguridad contenidas en este manual. AI igual que con cualquier tipo de equipo motorizado, un descuido o error por parte del operador puede producir lesiones graves. Esta maquina es capaz de amputar manos y pies y de arrojar objetoscon gran fuerza. De no respetar las instrucciones de seguridad siguientes se pueden producir lesiones graves o la muerte.
N i Sos
1. Puedenocurriraccidentestr&gicossi el operadorno est,. atentoa la presenciade ni_os.Por Iogeneral,los ni_osse sientenatraidospor este tipo de m&quinas y sufuncionamiento.Noentiendenlos riesgosni los
ADVERTENCIA
i ¸: /: ::/: ::
La presenciadeeste s[mbolo indica que se i trata de instrucciones importantes de seguridad que debe respetar para ev tar poner en riesgosu seguridad personaly!o
materialy la de otras personasl Lea y siga todas as instrucciones en este manual antes de iniciar la operac_on de esta maquina; En caso deno seguir estas instrucciones podr[a provocar lesiones personalesl Cuando yea
estesimbolo:
LAS ADVERTENClAS el mismolugardonde losvio por Oltimavez.
a. Mantengaa los ni5osfueradel &reade trabajoy bajo estrictavigilanciade un adulto responsable adem&sdel propiooperador.
b. Est_ alertay apaguela m_.quinasi un ni_o ingresaal _.rea.
c. Antesy mientrasse est&retrocediendo,mire haciaatr&sy cuide que no hayani5os.
d. Nuncatransporteni_os,ni siquieraconla(s) cuchilla(s)desconectada(s).Podriancaerse
y resultarseveramentelesionadoso podrian interferirconla operaci6nsegurade la m_.quina.
e. Tengaextremaprecauci6ncuandose aproxime a esquinasdegas, portales,arbustos,_.rbolesu
otros objetosque puedanimpedirlevet a un ni_o que pudiesechocar conla m_.quina.
f. Para evitar accidentes al operar en rnarcha atr_s, desenganche las cuchillasantes de eolocar mareha atr;_s.Si est;_instaladoen la m_quina, el "Modo Precauci6nMarchaAtr_s" no debe utilizarse ante la presenciade niSos u otras personas. g. Mantengaa los niSosalejadosde losmotoresen marchao calientes.Puedensufrirquemaduras
con un silenciadorcaliente.
h. Retirela Ilavecuandodeje la m_.quinasin
vigilancia,para impedirque una personasin autorizaci6nla maneje.
2. Nuncapermitaque losni5osmenoresde 14a5os operenesta m_.quina.Losni_osmayoresde 14a_os debenleer y entenderlas instruccionesde operaci6n y reglasde seguridadcontenidasen este manual,y debenser entrenadosy supervisadospor sus padres.
Su
Funcionamiento
l
deesta
Manejo seguro de la gasolina:
1. Sea surnarnentecuidadosoal rnanipular la m_.quinamotorizada
gasolinapara evitarlesioneso dahos. La gasolina es altamente inflamabley sus vapores pueden las personasque lean, comprendany respeten las advertencias e
causar explosiones. Se puede lesionargravementesi derramagasolinasobreusted o sobrela ropa,ya que instrucciones que
_sta se puede incendiar.L_.vesela piel y c_.mbiesede
ropade inmediato.
a. utilice s61orecipientesparagasolina autorizados.
b. NuncaIlenelos recipientesen el interiorde un vehiculoo cami6no cajade remolquecon recubrimientospl_sticos.Siemprecoloquelos
recipientesen el pisoy lejosdel vehiculoantes de Ilenarlos.
c. Cuandosea posible,retireel equipoa gasolina del cami6no remolquey II_neloen el piso.Si
esto no es posible,entoncesIleneel equipoen un remolquecon contenedorport_til,en vezde hacerlodesdeuna boquilladispensadorade gasolina.
d. Mantengala boquillade Ilenadoen contacto conel horde del dep6sitode combustibleo la aberturadel recipienteen todo momentohasta terminarla carga. Nouse un dispositivopara abrir/cerrarla boquilla.
e. Apaguetodos los cigarrillos,cigarros,pipasy otrasfuentesde combusti6n.
f. Nuncacarguecombustibleen la m_.quinaen un espaciocerrado.
g. Nuncasaquela tapa del combustibleni agregue combustiblemientrasel motorest,. calienteo en march& Dejeque el motorse enfriepor Io menosdos minutosantesde volvera cargar combustible.
h. NuncaIleneen excesoel dep6sitode combustible.Lleneel tanqueno m_.sde 1/2 pulgadapor debajode la basedel cuellodel tap6nde carga paradejar espaciopara la expansi6ndel combustible.
i. Vuelvaa colocarla tapa de la gasolinay ajOstelabien.
j. Limpieel combustibleque se hayaderramado sobreel motory el equipo.Trasladela m_quina a otrazona. Espere5 minutosantesde encenderel motor.
k. Para reducirel riesgode incendio,mantenga la m_.quinalimpiade pasto,hojasy de acumulaci6nde otros escombros.Limpielos
derramesde aceite o combustibley saquetodos los escombrosembebidosde combustible.
I. Nuncaalmacenela m_.quinao el recipientede combustibleen un espaciocerradodondehaya fuego,chispaso luz pilotocomo por ejemplo, de calentadoresde agua,calefactoreshornos, secadoresde ropa u otros aparatosa gas.
m. Dejeque la m_.quinase enfrie5 minutospor Io menosantesde guardarla.
4
1. Lea,cornprenday respetetodaslas instrucciones que figuranen la rn_.quinao en este(os)rnanual(es) antes de procederal ensarnbladoy operaci6ndel equipo.Guardeeste manualen un lugarseguropara consultasfuturasy regulates,asi cornoparasolicitar repuestos.
2. Farniliaricesecon todos loscontrolesy con el uso adecuadode los misrnos.Sepac6rnodetener
la rn_.quinay c6rnodesconectarloscontroles r_.pidarnente.
3. Nuncaperrnitaque rnenoresde 14a_osoperenesta rn_.quina.Losni_osde 14a_os y rnayoresdebenleer y cornprenderlas instruccionesde operaci6ny las reglasde seguridadcontenidasen este manual,y tarnbi_ndeben set capacitadosy estar supervisados por unode los padres.
4. Nuncaperrnitaque adultos sinlos conocirnientos adecuadosacercade la rn_.quinala operen.
5. Paraayudara evitarel contactocon lascuchillas o una lesi6npor alg[3nobjetoque seaarrojado, rnantengaalas personasque Ioobservan,a los ayudantes,ni_osy rnascotasalejadosal
15.No opereesta rn_.quinaestandobajo losefectosdel alcoholo de drogas.
16.Corteel cespedsolarnenteconluz de dia o con una buenaluz artificial.
17.Nuncatransportepasajeros.
18.Desenganchela(s)cuchilla(s)antesde colocar rnarchaatr_.s.Retrocedalentarnente.Siernpre
mirehaciaabajo y haciaatr_.santesy rnientrasva rnarchaatr_.s,paraevitar un accidente.
19.Reduzcala velocidadantes de dar la vuelta.Opere
la rn_.quinasuavernente.Evitela operaci6nerr_.ticay
la velocidadexcesiva.
20.Desenganchelascuchillas,coloqueel frenode rnano,detengael motory esperehastaque la(s) cuchilla(s)se detenga(n)pot cornpletoantes de retirarel colectorde recortesde cesped,vaciar los recortes,desbloquearla tolva,retirarcualquier residuoo desecho,o realizarcualquierajuste.
21.Nuncadeje la rn_.quinaen funcionarnientosin vigilancia.Apaguesiernprela(s) cuchilla(s),coloque la transrnisi6nen neutral,coloqueel freno de rnano, detengael motory retirela Ilaveantesde bajarsedel vehiculo.
funcionarniento.Detengala rn_.quinasi alguienentra en la zona.
6. Reviseminuciosarnentela zonadondese utilizar_.
el equipo.Retiretodaslas piedras,palos,Ilantas, huesos,juguetesy otros objetosextra_osque podrian set recogidosy arrojadospot la acci6nde las cuchillas.Losobjetosarrojadospor la rn_.quina
puedenproducirlesionesgraves.
7. Planifiqueel patr6nde corte paraevitar que la descargade materialse realicehacialoscarninos, las veredas,los observadores,etc. Eviteadern_.s
descargarmaterialcontralas paredesy obstrucciones que podrianprovocarque el materialdescargado rebotecontrael operador.
8. Paraprotegerselosojos, utilice siernpregalas o anteojosde seguridadrnientrasopera la rn_.quinao
rnientrasla ajustao repara.Losobjetosarrojadosque
rebotanpuedenproducirlesionesocularesgraves.
9. Utilicezapatosde trabajoresistentes,de suelafuerte, y pantalonesy carnisasajustados.Lasprendas
sueltaso lasalhajaspuedenquedaratrapadasen las piezas rnovibles.Nuncaopereesta rn_.quinaestando
descalzoo con sandalias.
10.Est_atentoa la cortadoray a la direcci6nde la descargade los aditarnentosy no apuntea nadie.
Nuncaoperela cortadorade c_spedsinque est_n en su lugarapropiadola cubiertade descargao el colectorde recortesde cesped.
11.Noponga las rnanosni los piescerca de las piezas rotatoriasni debajode la plataforrnade corte.El
contactocon la(s) cuchilla(s)puede producirla arnputaci6nde rnanosy pies.
12.Unacubiertade descargaque falteo est_ da_ada puede provocarlesionespor contactocon la cuchillao por objetosarrojados.
13.Detengala(s) cuchilla(s)cuandocrucesendas de gravilla,senderoso carninosy cuandono est_ cortandoel c_sped.
14.Est_atentoal tr_.nsitovehicularcuandoest_ operando cerca de o en crucesde carninos.Estarn_.quinano
debe utilizarseen la via pQblica.
22.Tengacuidadoal cargaro descargarla rn_.quina
en un rernolqueo carni6n.Esta unidadno debe conducirseen ascensoo descensode rarnpas, porquepodria ladearsey provocarlesiones personalesgraves.La unidadsedebe ernpujar rnanualrnenteen la tampa para cargarlao descargarlaapropiadarnente.
23.El silenciadory el motor se calientany pueden producirquernaduras.No lostoque.
24. Reviseel espaciolibre por encirnade la cabeza antesde conducirbajolas rarnasbajasde _.rboles, cables,cerrarnientosde puertas,etc. en loscuales el operadorpodriaatorarseo serernpujadofuerade la unidad,Io que podria resultaren lesionesgraves.
25. Desenganchetodos losernbraguesde los accesorios,presionetotalrnenteel pedaldel frenoy carnbiea neutralantes de intentararrancarel motor.
26.Su rn_.quinarue dise_adaparacortar cesped residencialnormal,con unaalturano mayora 10".
No intentecortarcespeddernasiadocrecido,seco
(pot ej., pastura)ni pilasde hojas secas.El c_sped y las hojassecaspuedenentraren contactocon el escapedel motor y/o acurnularseen la plataforrna de la cortadorade cesped,convirti_ndoseen un peligrode incendio.
27.Utilicesolarnenteaccesoriosy aditarnentos aprobadospara esta rn_.quinapor el fabricante original.Lea,cornprenday sigatodas las instruccionesproporcionadascon los accesorioso aditarnentosaprobados.
28.Lasestadfsticasindicanque los operadores rnayoresde 60 a_os seven involucradosen un alto porcentajede lesionesrelacionadascon la conducci6nde tractorescorta cesped.Estos
operadoresdebenevaluarsucapacidadparaoperar el tractorcorta c_speden forrnasuficienternente seguraparaprotegersea ellosrnisrnosy a los dern_.scontralesionesgraves.
29.Si se presentansituacionesque no est_.nprevistas
en este manual,seacuidadosoy useel sentido cornQn.P6ngaseen contactocon su representante de atenci6nal clientepara solicitarasistencia.
5
Medidas
ADVERTENCIA
La presenciade este simbolo indica que se trata de instrucciones importantesde seguridad que debe respetar para evitar porter en riesgo su seguridad personal y/o material y la de otras personas. Lea y siga todas las instrucciones en este manual antes de iniciar la operaci6n de esta ma.quina.En
caso de no segu_restas instruccionespodria provocar lesiones persona es. Cuando vea este simbolo.
TENGA EN CUENTAS
LAS ADVERTENCIAS
SU
responsabilidad
Restrinja el uso de esta m_tquinamotorizada a las personasque lean, comprendany respeten las advertenc_as e instruccionesque figuran en este manual
La presenciade este i simbolo indica que se i trata de instrucciones i importantesde seguridad que debe respetar para evitar i poner en riesgo su i seguridad personal y/o materialy la de otras personas. Lea y siga todas las instrucc_ones en este manual antes de iniciar la operaci6n de esta m_.quina.En
caso de no seguir estas instrucciones podria provocar lesiones i personales. Cuando vea i este simbolo.
TENGA EN CUENTAS
LAS ADVERTENCIAS
SU
responsabilidad
Restrinjael uso de esta m_.quinamotorizada a las personas que lean, comprendan y respeten las advertencias e instrucciones que figuran en este manual
Funcionamientoen pendientes:
Las pendientesson un factorirnportantede perdidade controlque se relacionaconaccidentesde derrapesy cafdasque puedenproducirlesionesgravese incluso la rnuerte.La operaci6nen pendientesrequieremayor precauci6n.Si no puede retrocederen la pendienteo si no se sienteseguro,no realiceningunaoperaci6nde corte.
Para seguridad,use el rnedidorde pendientesque se incluyecornopartede este manualpara rnedir la pendienteantesde operarla unidaden unazona inclinada.Si la pendientees mayora 15 gradosen el rnedidor,no opere esta unidaden ese sector,pues podriacausar lesionesgraves.
Haga Io siguiente:
1. Corte haciaarribay abajo de laspendientes,no en forrnatransversal.Tengacuidadocuandocarnbiede
direcci6nal operarla rn&quinaen pendientes.
2. Est_atento a loshoyos,surcos,baches,rocas,u otrosobjetosocultos. El terrenodesniveladopuede voltearla rn_.quina.El cespedalto puedeocultar obst&culos.
3. Vayaa baja velocidad.Elijauna velocidadIo suficienternentebaja,de rnodoque no tengaque detenerseo hacercarnbiosrnientrasest,. sobrela pendiente.Las Ilantaspodrianperdertracci6nsobre las pendientesaQncuandolos frenosfuncionaran apropiadarnente.Siernprernantengala rn_.quinaen
carnbiornientrasdesciendelas pendientes,para poderfrenarcon el motor.
No haga Io siguiente:
1. No gire sobrelas pendientesa rnenosque seanecesario.Si es posible,gire lentarnentey gradualrnenteduranteel descenso.
2. No corteel cespedcerca de declives,zanjaso terraplenes.La cortadorade cespedpodria volcarse repentinarnentesi una de las ruedasestuvierasobre el hordede un acantilado,zanjao si un hordese desrnoronara.
3. No intenteestabilizarla rn_.quinaponiendoel pie en el suelo.
4. No utiliceun colectorde recortesde cespeden pendientesernpinadas.
5. No corteel cespedhQrnedo.Unarnenortracci6n
podriacausarderrapes.
6. No carnbiea transrnisi6nneutralpara descender.El
excesode velocidadpodria hacerque el operador pierdael controlde la rn&quina,ocasionandolesiones gravese inclusola rnuerte.
7. No arrastrecargas pesadasdetr_.sde los accesorios
(por ejernplo,carrito de basuracargado,rodillo de cesped,etc.)en pendientesrnayoresde 5 grados.Cuandose desciende,el pesoadicional tiendea ernpujarel tractory puedehacerque se pierdael control.(por ejernplo,el tractorpodria acelerarse,reduciendola capacidadde frenadoy rnaniobrabilidad,los accesoriospodrianplegarse cornoun cortaplurnasy hacerque el tractorse d_ vuelta).
pesoso contrapesosde las ruedas,para rnejorarla estabilidadde la rn_.quina.
5. Tengaespecialcuidadocon loscolectoresde cespedu otrosaditarnentos.Los rnisrnospueden rnodificarla estabilidadde la rn&quina.
6. Hagaque todos los movirnientosen laspendientes seanlentosy graduales.Nocarnbierepentinarnente
la velocidadni la direcci6n.Un frenadoo carnbiode velocidadrepentinospuedencausarque el frentede la rn_.quinase levantey d_ una volteretahaciaatr_.s,
Io que podriaproducirlesionesgraves.
7. Evitearrancaro detenerseen una pendiente.Si los neurn_.ticospierdenla tracci6n,desenganchelas cuchillasy desciendalentarnentela pendiente.
Remolque:
1. RernolqueQnicarnenteutilizandouna rn_.quinaque
cuentecon un dispositivode enganchediseSadopara esafunci6n.No acopleequipo rernolcadoexceptoen el puntode enganche.
respectaa los Ifrnitesde pesode los equiposa rernolcary al rernolqueen pendientes.
3. Nuncaperrnitala presenciade ni_osu otras personas en o sobrelos equiposrernolcados.
4. En las pendientes,el pesodel equipo rernolcado puedecausarp_rdidade tracci6ny perdidade control de la rn_.quina.
5. Despl_ceselentarnentey deje distanciaadicionalpara frenado.
6. No carnbiea transrnisi6nneutralpara descender.
6
Servicio
1. Nuncahagafuncionarun motoren espacioscerrados o en una zonacon pocaventilaci6n.El escapedel motorcontienernon6xidode carbono,un gasinodoro y letal.
10.Nuncatrate de hacerajusteso reparacionesa la rn_.quinarnientrasel motorest,. en rnarcha.
11.Loscornponentesdel colectorde recortesde cesped y la cubiertade descargaest_.nsujetosa desgaste y daSosque podriandejar expuestaspiezasque se rnueveno perrnitirque se arrojenobjetos.Para
protegersu seguridad,verifiquefrecuenternente cornpruebeque la(s) cuchilla(s)y todas laspiezas rn6vilesse hayandetenido.Desconecteel cablede la bujfay p6ngalode rnaneraque haga rnasacontra el motorpara evitarque se enciendade rnanera accidental.
3. Reviseperi6dicarnente,paraasegurarsede que las cuchillassedetenganpor cornpletoen un espaciode accionarel controlde desenganche.Si las cuchillas no se detienendentrode este periodode tiernpo, su unidaddeber_,ser reparadapor un distribuidor autorizadoMTD.
4. Reviseconfrecuenciael funcionarnientodel sisterna de frenos,ya que est,. sujetoa desgastepor la operaci6nnormal.Ajustey efectQernantenirniento segQnse requiera.
5. Inspeccionelos pernosde rnontajede la(s) cuchilla(s) y del motora intervalosfrecuentes,para verificar que est_n bien ajustados.Adern_.s,inspeccione visualrnentela(s) cuchilla(s)en buscade daSos(pot ejernplo,desgasteexcesivo,abolladuras,rajaduras, etc.). Reernplacela(s) cuchilla(s)s61ocon piezasde los fabricantesde equiposoriginalesenurneradasen este manual."La utilizaci6nde piezasque no curnplen con las especificacionesde equiposoriginalespodria tenet cornoresultadoun rendirnientoincorrectoy adern_.sponeren riesgola seguridad."
6. Lascuchillasde las cortadorasde cespedsonfilosas.
Envuelvala cuchillao utiliceguantesy extremelas precaucionescuandoefectQernantenirniento.
7. Mantengatodas las tuercas,pernosy tornillosbien ajustadospara asegurarsede que la rn_.quinase
encuentraen condicionessegurasde operaci6n.
8. Nuncaintentealterarel sisternade bloqueode seguridadu otros rnecanisrnosde seguridad.Controle
peri6dicarnenteque funcionende forrnaadecuada.
9. Despu_sde golpearcontraalg[3nobjetoextraSo, detengael motor,desconecteel(los) cable(s) de bujia y conecteel motora rnasa. Inspeccione rninuciosarnentepara versi la rn_.quinaest,. daSada.
Repareel daSoantesde arrancary operar.
piezasde losfabricantesde equiposoriginales enurneradasen este manual."La utilizaci6nde piezasque no curnplencon lasespecificacionesde equiposoriginalespodria tenercornoresultadoun rendirnientoincorrectoy adern_.sponeren riesgola seguridad."
12.No carnbiela configuraci6ndel reguladordel motor ni Ioopere a unavelocidaddernasiadoelevada.El
reguladorcontrolala velocidadrn_.xirnasegurade
operaci6ndel motor.
13.Mantengao reernplacelasetiquetasde seguridade instruccionessegQnseanecesario.
la elirninaci6ncorrectade combustible,aceite,etc.
para protegerel rnedioarnbiente.
i m p0rta rites
La presenciade este simbolo indica que se trata de instrucciones importantes de seguridad que debe respetar para evitar poner en riesgo su seguridad personal y/o material y la de otras personas. Lea y siga todas las instrucciones en este manual antes de iniciar la operaci6n de esta m_.quina.En
;aso de no seguir estas instrucciones podrfa provocar lesiones personales. Cuando vea este sfmbolo.
TENGA EN CUENTAS
LAS ADVERTENCIAS
SLI
responsabilidad
Restrinja el uso de esta maqu_namotorizadaa las personasque lean.
comprendan y respeten las advertencias e instrucciones que figuran en este manual
7
ADVERTENCIA
cuidadoso al manipular
lagasolina, Lagas01ina es altamente inflamable y sus Vaporespueden
Nunca cargue combustible en la m_quina enun espacio
Cerrado o Cuando el motor est_ caliente o
en marcha: Apague cigarrillos, cigarrosi pipas y otras fuentes de
combusti6.i
NOTA Este Manua del operador cubre una gama de especificaciones ae productoS de varios modelosl Las caracteristicas y funciones incluidas yio ilustradas en este manual pueden
no ser aplicables a todos los modelos:
MTD LLC se reserva el derecho de modificar !as
especificaciones de los productos, los dBenos y el equipo sin previo a.visoy Sin responsabilidad pot
Capuch6n de goma
Figura 3=1
8
NOTA:Este Manualdel operadorcubreuna gamade especificacionesde productosde variosmodelos.Las
caracteristicasy funcionesincluidasy/o ilustradas en este manualpueden no ser aplicablesa todos los modelos.MTDLLCse reservael derechode modificar las especificacionesde los productos,losdise_osy el equiposin previoaviso y singenerarresponsabilidadpor obligacionesde ningOntipo.
Instalaci6n de los cables de la bateria
NOTA:Algunosmodelosse enviancon los cablesde la bateriaya conectados.
NOTA: El bornepositivode la bateriaest& marcado como Pos(+). El borne negativode la bateriaest,.
marcadocomo Neg (-).
• El cable positivo(pesadoy de color rojo)est& sujeto al bornepositivode la bateria(+) por mediode un pernohexagonaly una tuercahexagonal,seg[3n configuraci6nde f_.brica.AsegQreseque el borne est_ cubiertoconun capuch6nde gomaque ayudea protegerlocontra la corrosi6n.
• Retireel pernohexagonaly la tuerca hexagonaldel cablenegativo.
• Retirela cubiertapl_.sticanegra,(si est,. puesta)del bornenegativode la bateriay una el cablenegativo
(pesadoy de colornegro) al borne negativode la bateria(-) utilizandoel pernoy la tuerca.
NOTA:Si la bateriase pone en funcionamientodespu_s de la fecha indicadaen su parte superior,cargue la bateriasiguiendolas instruccionesde la secci6n
Mantenimientodel tractorcorta cespedde este manual antesde operarel tractor.
Llenado de gasolina y aceite
El dep6sitode gasolinaest& ubicadodebajodel cap6 y tiene 1-1/2galonesde capacidad.NO IoIleneen exceso.
,_ gasolina es altamente inflamable y sus vapores pueden causar explosiones.
Nunca cargue combustible en la mbquina en un espacio cerrado o cuando el motor estb caliente o en marcha. Apague cigarrillos, cigarros, pipas y otras fuentes de combusti6n.
Realicela cargade gasolinay aceite del motor segQnlas instruccionesdel Manualdel propietario/operadordel motorque se entregacon el tractor.Lealas instrucciones conatenci6n.
IMPORTANTE:Su tractor seenviacon aceiteen el motor.Sin embargo,usted DEBEcontrolarel nivelde aceiteantesde operarel tractor.Tengacuidadode no
Ilenarloen exceso.
E×tracci6n de la traba de seguridad utilizada en el envio
,_ apagado, quite la Ilave de encendido y coloque el freno de mano antes de extraer la traba de seguridad utilizada en el env(o.
Localicela trabade seguridadutilizadaen el envio,en caso de haber,y la etiquetade advertenciarespectiva del ladoderechode la cortadorade cesped,entreel canalde descargay la plataformade corte.Wase la
Fig.3-2.
Mientrassostieneel canalde descargacon su mano izquierda,extraigacon la manoderechala trabade seguridadutilizadaen el envio,sujetandolaentresus dedospulgare indicey rot_ndolaen el sentidode las agujasdel reloj.
ADVERTENCIA:La traba de seguridad utilizada en el envio s61oa los efectos de un correcto embalaje, se debe retirar y desechar antes de operar su cortadora de c_sped.
ADVERTENCIA:La plataforma de la cortadora de c_sped puede arrojar objetos.
En caso de operar la cortadora de c_sped
sin colocar la cubierta de descarga en la posici6n adecuada para el funcionamiento, podrian producirse graves lesiones
personales y/o da_os materiales.
Instalaci6n del volante
Si el tractorno se entregacon el volanteinstalado, los elementosde ferreterianecesariospara instalarlo se suministranembaladosconel volante,debajodel casquetedel mismo.Extraigael casquetedel volante mediantepalancay retirelos elementosde ferreteria.
1. Con las ruedas del tractor orientadas en linea
recta hacia adelante, coloqueel volantepor encima del eje de direcci6n.
2. Coloquela arandela(conel lado esf_ricohacia abajo) por encimadel eje de direcci6ny ajOstelacon el perno hexagonal.Wase la Fig. 3-3.
3. Coloqueel casquetedel volanteen el centrodel volantey empujehaciaabajo hastaque haga clic al encajaren su lugar.
Figura 3=2
Figura 3=3
Montaje del tractor corta
ADVERTENCIA
Aseg=Jresedeque el motor de la cortadora de quite la Ilave de encendido y coloque el freno de rnano antes de extraer la traba de seguridad utilizada en el envio:
La traba de seguridad utilizada en el envio s61o a los efectos de un correcto ernbalaje, se debe retirar y desechar antes de operar su cortadora de cesped.
La plataforrna de la cortadora de eesped puede arrojar objetos.
En caso de operar la cortadora de cesped sin colocar la cubierta de descarga en la posici6n adecuacla para el funcionarniento, podnan producirse graves
lesiones personales y/o daSos rnateriales.
9
ADVERTENCIA
rn_quina, aseg_rese que el asiento est_ enganchado enei tope del asiento, p_rese detr_s de la rn_quina y tire del asiento hacia atras hasta quese enganche totalrnente enel tope:
NOTA: Por razones relacionadas con el enVio, los asientos se fijan al soporte de pivote del asiento del iract0r con una tira pl_tst!cao se instalan hacia atra.srespecto del soporte de pivote: En cualquiera de los dos cas0s, Saqueel asiento de la posici6n de envio y retire los dos tornillos hexagonales (o periHas; en losmodelos equipados con las mismas)dela parte inferior del asiento antes de Seguir con las instrucciones ap icable&
Figura 3-4
Figura 3-5
Figura 3-6
Instalaci6n del asiento
Losestilosde asientovarian segOnel modelode tractor.
Haytres estilosdisponibles:
• De ajusteest_.ndar
•
De ajuster_.pidoy
De ajustemedianteperilla
Si el asientono viene instaladode f_.brica,consultelas
Figuras3-4,3-5 y 3-6 para identificarel estilo de asiento de su tractory sigalas instruccionesrespectivaspara instalarlo.
NOTA:Por razonesrelacionadasconel envio, los asientosse fijanal soportede pivotedel asientodel tractorconuna tira pl_.sticao se instalanhaciaatr_.s
respectodel soportede pivote. En cualquierade los dos casos,saqueel asientode la posici6nde envioy retire los dostornilloshexagonales(o perillas,en los rnodelos equipadoscon las mismas)de la parteinferiordel asiento antesde seguircon las instruccionesaplicablesque se proporcionana continuaci6n.
Asiento de ajuste est_ndar
1. Coloquelos tornilloscon reborde(que se encuentran en la basedel asiento)dentrode lasaberturasde ranuradel soportede pivotedel asiento.Fig.3-4.
2. Desliceel asientolevementehaciaatr_.sen el soporte de pivotedel asiento,alineandolas ranurastraseras del soportede pivotecon losdos orificiosrestantesde la basedel asiento.
.
Elija la posici6ndeseadadel asientoy fijelocon los dostornilloshexagonalesque retir6antes.Wase la
Fig. 3-4.
Asiento de ajuste r_pido sobreel soportede pivotedel asiento,tire de la leng_Jeta que se encuentrasobreel topedel asientoy mant_ngala abiertamientrasdeslizael asiento parasacarlodel soportede pivote.Wase la Fig. 3-5.
1. Alineelos separadorespl_.sticosdel asientocon las ranurasdel soportede pivotedel asiento.
2. Desliceel asientohaciaadentrohasta que el separadordelanterose enganchaconel topedel asiento.Wase la Fig. 3-5.
10
_ DVERTENCIA:Antes de operar esta enganchado en el tope del asiento, p#rese detr#s de la m#quina y tire del asiento hacia arras hasta que se enganche totalmente en el tope.
Asiento de ajuste mediante perillas
1. Coloquelos tornilloscon reborde(que se encuentran en la basedel asiento)dentrode lasaberturasde ranuradel soportede pivotedel asiento.Fig.3-6.
2. Desliceel asientolevementehaciaatr_.sen el soporte de pivotedel asiento,alineandolas ranurastraseras del soportede pivotecon losdos orificiosrestantesde la basedel asiento.
3. Elija la posici6ndeseadadel asientoy fijelocon las dos perillasque retir6antes.Wase la Fig. 3-6.
Identificaci6n de la clavija de abono
En lostractoresequipadoscon clavijade abono,la mismase encuentradentrode la aberturade descarga de la plataformade corte.
NOTA:Consulte Abono en la seccidn "Funcionamiento
/-
Si prefiereoperarla plataformade corte sinabonadora, sirnplementeretirela clavijade abonodesenroscandola tuerca de mariposapl_.sticaque la sujetaa la plataforma de corte.Esto permitir_,que los recortesde cesped salganpot la aberturade descargadurantela operaci6n.
Wase la Fig.3-7.
Presi6n de los neum_ticos
_ de 30 psL Se debe mantener una presiSn uniforme para todas las ruedas en todo momento.
Talvez losneum_.ticosde la unidadhayansidoinfiados en excesopara el enviodel producto.Reduzcala presi6n neum_.ticostraserosy de 14p.s.i,para los neum_.ticos
presi6nm_.ximaen p.s.i,
....
"..
.....
..............
'........
\
/
_,
:::_ , b I
Figura 3=7
La presi6n maxima de los neumaticos en cualquier circunstancia es de 30 psi, Se debe mantener una presi6n uniforrne para todas las ruedas en todo momento,
\
NOTA: P0r razones relaci0nadaScon el envio,
10Sasientos se fijan al soporte de piv0te del asiento del tractor con una tira pla.sticao Se instalan hacia atra.srespecto del soporte de pivotel En cualquiera de los dos casos, saque el asiento dela posici6n de envio y retire 10sdos torn!llos
hexag0nales (o perilla& en los mode!os equipados con las mismas)de la parte inferior del asiento antes de Seguir c0n las instrucciones aplicables.
11
A
Conozca su tractor corta c sped
/
NOTA: Cualquier referencia hecha en este manual al lado DERECHO o
IZQUIERDOdel tractor debe entenderse tal como se observa desde la posici6n del operador.
NOTA: Por razones relacionadascon el envb, los asientosse fijan al soporte de pivote del asiento del tractor con una tira pl_.sticao
se instalan hacia atr£s respecto del soporte de pivote. En cualquiera de los dos casos, saque el asiento de la pos_c_on de envio y retire los dos tornillos hexagonales
(o perillas, en los modelos equipados con las mismas) de la parte inferior del asiento antes de seguir con las instrucciones aplicables.
NOTA:Nose muestrael volantepara
Figura 4-1 1 Si est,. instalado
A
B
C
D
Palancade controlde velocidad/ frenode mano
Pedalde freno-embrague
Palancade cambios
Controldel cebadort
E Palancade controldel regulador
F M6dulodel interruptorde encendido
G Palancade elevaci6nde la plataforma
H Palancade potenciade arranque(PTO)
(enganchede cuchilla)
NOTA:Cualquierreferenciahechaen este manualal lado DERECHOo IZQUIERDOdel tractordebe entendersetal como seobservadesdela poslci6ndel operador.
12
Palanca de control del regulador
La palancade controldel reguladorest,. ubicadadel lado derechodel panelde instrurnentosdel tractor.Esta
palancacontrolala velocidaddel motory,en algunos rnodelos,cuandosela ernpujatotalrnentehaciaadelante, tarnbi_ncontrolael cebador.Cuandose Iocolocaen una posici6ndeterrninada,el reguladorrnantieneuna velocidadde motoruniforrne.Wase la Fig.4-2.
IMPORTANTE:Cuandoopere el tractorcon la plataforrnade cortecolocada,aseg@esede que la palancadel reguladorest_siempre en la posici6n FAST
(velocidadr@ida; representadapor una liebre).
Control del cebador
En algunosrnodelos,si se rnuevela palancadel regulador totalrnentehaciaadelantese activael control del cebador del motor.Entodos los otros rnodelos,el control del cebador puedeencontrarseen el
f
FAST
SLOW
Off e,m
|1
CHOKE
FAST
SLOW
Figura 4-2
On/Lights
AIactivarel controldel cebadorsecierra la placadel cebadordel carburadory esto ayudaa arrancarel motor.ConsulteArranquedel motor en la p_.gina16de
detalladas.
Interruptor de encendido
Start
ms
Rmm
©
m gire en el sentidode Insagujasdel reloja la posici6n
START(arranque).Sueltela Ilaveen la posici6nON
(encendido)unavez que hayaarrancadoel motor.
Wase la Fig. 4-3A.
M6dulo del interruptor de encendido
(Si est# instalado)
Paraencenderel motor,insertela Ilaveen el interruptor de encendidoy girela en el sentidode las agujasdel reloj haciala posici6nSTART(arranque).Sueltela Ilave en la posici6nMODONORMALDE CORTEuna vez que hayaarrancadoel motor.
Paradetenerel motor,gire la Ilavede encendidoen sentidocontrarioalas agujasdel reloj hasta la posici6n
OFF (apagado).Wase la Fig.4-3B.
@
Modo de torte normal
PosicJ6n de arranque
_ DVERTENClA:Nunca deje la m#quina
Desenganchesiempre la potencia de
arranque (PTO),mueva la palanca de cambios a la posiciSn neutral, co/oque el
freno de mano, apague el motor y retire la Ilave,para evitar que alguien encienda accidentalmente el motor.
IMPORTANTE:Antes de operarel tractor,consulteIns seccionesInterruptores de bloqueo de seguridad en la p&gina14y Arranque del motor en la p&gina16de este manualpara obtenerinstruccionesdetalladassobre el M6dulodel interruptorde encen.didoy paraoperar el tractoren MODO DEPRECAUClONMARCHAATRAS.
Palanca de elevaci6n de la plataforma
Ubicadaen el guardabarrosderechodel tractor,la palancade elevaci6nde la plataforrnase utiliza para
Figura 4=3 carnbiarla alturade la plataforrnade corte.Para
utilizarla,rnuevala palancahaciala izquierda,luego col6quelaen la rnuescaque rnejorseadaptea la aplicaci6ndeseada.
Freno de mano
Paracolocarel freno de rnano,presionetotalrnenteel pedalde freno-ernbrague.Muevala palancade control de velocidadtotalrnentehaciaabajoen la posici6nde frenode rnano.Suelteel pedal de freno-ernbraguepara perrnitirque engancheel frenode rnano.
Parasoltarel frenode rnano,oprirnael pedalde frenoernbraguey rnuevala palancade controlde velocidad fuerade las rnuescasa la posici6ndeseada.Sueltela
palancade controlde velocidady el pedal de frenoernbrague.
13
ADVERTENCIA
Nunoa deje la m_quina en funcionamiento sin vigilancia. s iempre la potencia de arranque (PTO) mueva la palanca de
cambios a la posici6n neutral, coloque freno de mano, apag ue el motor y retire la
Ilave; para evitar que alguien encienda accidentalmente el motorl llV]PORTANTE
Antes de opeiar el
:ractor,consulte las secciones lnterruptores de bloqueo de seguridad en la p_.gina
14.y Arranq ue del motor en la p_tgina16 de este manual para obtener instrucciones detalladassobre el
M6dulo del interruptorde
encendido y para operar el tractor en MODO
DE PRECAUCI_N
_ARCHA ATRAS.
(
//I
/A
J z_J L.]
_ r
_
,T,
FORWARD_ ernbraguey rnuevala palancade controlde velocldad haciaatrfisy su61telaen una rnuesca.
NOTA:Lostractorescortacespedvarian __ seg_nelrnodeloyestfindisponibles con una pa ancade contro de6d7 velocldades.
&*
_2 o |
=
Funcionamiento
!
NUETRAL
REVERSE_
ADVERTENq
Figura 4-4
NOTA:Si el operadorabandonael asientoy deja el
trBoto,
el motorse apagar_,de forrnaautorn_.tica.
si el sistema de bJoqueo funciona real, Este sisterna fue disehado para brindarle seguridad y protecci6ni
NOTA: Si el operador abandona el asiento
Pedal de freno-embrague
El pedal de freno-ernbragueest,. ubicadoa la izquierda del tractorcorta cesped,a Io largodel estribo.Oprirna
el pedalde freno-ernbragueun pocohaciaabajo cuandocarnbialasvelocidadespara que el tractorse desplacern_.sdespacio(ConsultePalancade control de velocidad).Oprirnael pedal totalrnentehaciaabajo para engancharel frenode disco y Ilevarel tractora la detenci6ncornpleta.
NOTA:Es necesariopresionarel pedalpara arrancarel motor.ConsulteInterruptoresde bloqueode seguridad en la p_.gina14.
Palanca de cambios y deja el motor funcionando,debera colocar el freno de mano, o el motorse apagara de forma autom_ttica.
La palancade carnbiosest&ubicadadel lado izquierdo del guardabarrosy tienetres posiciones,MARCHA
DIRECTA,NEUTRALY MARCHAATRAS.Cuando
rnuevala palancade carnbios,el pedal debe estar oprirnidoy el tractorno debe estaren rnovirniento.
Wase la Fig. 4-4.
IMPORTANTE:Nuncafuerce la palancade carnbios.
De hacerlo,puededaSarseseriarnentela transrnisi6n
0 NOTA: AI arrancar el motor, la palanca de la potenciade arranque
(PTO) (enganche de cuchilla) debe encontrarse en la posici6n de desconexbn
(PTO OFF).
IMPORTANTE
Nunca fuerce la palanca de cambios.
De hacerlo, puede daSarseseriamente la transmis_6ndel tractor.
del tractor.
Palanca de control de velocidad
La palancade controlde velocidad, ubicadadel lado izquierdode la consoladel panel del tractor,perrnite regularla velocidadde piso del tractor corta c_sped.Parausarla,oprirnael pedalde freno-ernbraguey rnuevala palancahaciaafuerade la rnuesca del frenode rnanoy haciaadelante para aurnentarla velocidadde piso del tractor.Cuandohayaalcanzado
la velocidaddeseada,suelte la palancaen la rnuescaadecuadapara rnanteneresavelocidad.
Para reducirla velocidadde pisodel tractor,oprirnael pedalde freno-
,,,_'
=
PARK
BRAKE
Palanca de potencia de arranque (PTO) (enganche
! 2 o de cuchilla)
Ubicadasobreel guardabarrosderecho
_3 m del tractor,la potenciade arranque
(PTO)(enganchede cuchilla)se usa parasurninistrarenergiaa la plataforrnade corte u otros aditarnentos
(disponiblespor separado).Para hacerla funcionar,rnuevala palancatotalrnente
!
_4
"8
,t5 haciaadelante.Moviendola palanca totalrnentehaciaatr_.s,en la posici6nPTOOFF(potencia de arranquedesconectada),se corta la energiaa la plataforrnade corte/aditarnento.
NOTA:AIencenderel motor,la palancade la potenciade arranque(PTO)(enganchede cuchilla)debe encontrarse en la posici6nde desconexi6n(PTOOFF).
Interruptores de bloqueo de seguridad
Estetractorest,. equipadoconun sisternade bloqueo de seguridadpara protecci6ndel operador.Si el sisterna de bloqueofuncionarnal,no se debe hacerfuncionar el tractor.P6ngaseen contactocon un distribuidorde servicioMTDautorizado.
El sisternade bloqueode seguridadirnpideque el motorarranqueo se enciendaa rnenosque est_ colocadoel frenode rnano,y la palancade potencia de arranque(PTO)(enganchede cuchilla)est_ en posici6ndesconectada(OFF).
Si el operadorabandonasu asientoantes de colocarel frenode rnano,el motorse apagar_,autom_.ticarnente.
si el frenode rnanoest,. colocadoo no.
Si el operadorenganchala potenciade arranque
(PTO)conel frenode rnanocolocado,el motor se apagar_,autorn_.ticarnente.
ModeJos sin modo de precauci6n en marcha atr_s
_ abandonael asientodel tractorconla palancade la potenciade arranque(PTO) (enganchede cuchilla)en arranque(PTO)(enganchede cuchilla) secoloca en posici6nenganchada(ON)con la palancade carnbios en posici6nrnarchaatr_.s.
Modelos con modo de precauci6n en marcha atr_s
• Conla Ilavede encendidoen posici6nde CORTE
DE CESPEDNORMAL,el motorse apagar& colocaen posici6nenganchada(ON)con la palanca de carnbiosen rnarchaatr&s.
sistema rue disefado para brindarle seguridad y proteccidn.
14
:_!
ii
Modo de precauci6n en marcha atr_s
(Mode/os equipados con rn6du/o de encendido)
,_ ADVERTENClA:Tengamucho cuidado
PRECAUCIONEN MARCHAATRAS.Mire
siempre hacia abajo y hacia atr&s antes y mientras opera marcha atr&s. No opere el tractor cuando haya nifios u otras personas en el lugar. Detenga el tractor inmediatamente si alguien ingresa en la zona,
La pqsici6nMODO DEPRECAUCIONEN MARCHA operarel tractoren marchaatr&scon lascucNlas
(potenciade arranque/PTO)enganchadas.
IMPORTANTE:Nose recomiendacortarel cespeden marchaatr&s.
ParautilizareIMODODEPRECAUCIONEN MARCHA
ATRAS:
IMPORTANTE:El operadorDEBEestar sentadoen el asientodel tractor.
.
Arranqueel motorsegOnlas instruccionesde la p_gina 16Arranquedel motor.
2.
Gire la Ilavedesdela posici6nde CORTE
NORMAL(verde)hasta la posici6n.deMODODE
PRECAUCIONEN MARCNAATRAS(amarilla)del m6dulodel interruptorde Ilave. V_asela Fig.4-5.
.
triangularde color naranja)en la esquinasuperior derechadel m6dulodel interruptorde Ilave.La luz indicadorarojaen la esquinasuperiorizquierda del m6dulodel interruptorde Ilaveestar_.ON
(encendida) mientrasest_ activado.Wase la Fig.
4-5.
4. Unavez activadoel Modode Precauci6nen Marcha el tractorpodr_,conducirseen rnarchaatr_.scon
las cuchillasde corte (potenciade arranque/PTO) enganchadas.
5. Siempremirehaciaabajo y haciaatr_.santesy
mientrasoperaen marchaatr_.s,paraasegurarse que no hayani_osen el _.rea.
6. Unavez retornadoel movimientohaciaadelante, vuelvaa colocarla Ilaveen la posici6nCORTE
NORMAL.
IMPORTANTE:El MODODE PRECAUClONEN
MARCHAATRASpermanecer&activadohasta que: a. Se coloquela Ilaveen la posici6nCORTE
NORMALo en la posici6nSTOP(detenci6n).
b. El operadorcoloqueel frenode mano, presionandototalmenteel pedal de frenoembraguey manteni_ndolomientrasmuevela palancade controlde velocidada la posici6n
FRENODE MANO.
Luz
Posici6n de detenci6n
Bot6n de marcha atras
Posicibn de modo precauci6n marcha atr_s
Posici6n de arranque
Figura 4=5
Colocaci6n del freno de mano
Paracolocarel freno de mano:
1. Presionetotalmenteel pedalde freno-embraguey mant_ngaloconel pie.
2. Muevala palancade controlde velocidadhacia abajo,en la posici6nfrenode mano.
3. Suelteel pedalde freno-ernbraguepara permitirque engancheel frenode mano.
Parasacarel frenode rnano:
1. Presioneel pedalde freno-embraguey muevala palancade controlde velocidadfuerade la posici6n frenode mano,a la velocidaddeseada.
Fijaci6n de la altura de corte
1. Seleccionela posici6nde alturade la plataforma de cortecolocandola palancade elevaci6nde la plataformaen cualquierade las seis muescas de diferentealturade corte,del lado derechodel guardabarros.
2. Ajuste las ruedasde la plataforma(en caso de estar instaladas),de modoque quedenentre1/4 y 1/2 pulgadapor encimadel pisocuandoel tractorse encuentraen una superficielisa y plana,por ejemplo, unasenda.
,_ ADVERTENCIA:Mantenga las manos y de la plataforma de corte.
NOTA:En los modelosequipadoscon ruedasde plataforma,las mismasconstituyenun mecanismo parael cuidadodel cespedy no fuerondiseSadaspara soportarel pesode la plataformade corte.
Consultela secci6nNivelaci6nde la plataforma en la p_.gina20 de este manualpara obtenerinstrucciones detalladassobrediferentesajustesde la plataforma.
ADVERTENCIA
Tenga mucho cuidado
cuando opere el tractor en el MODO
DE PRECAUClON EN
MARCHA ATRAS. Mire siempre hacia abajo y hacia atr_s antes y mientras opera marcha atr_s. No opere el tractor cuando haya niSos u otras personas en el lugar. Detenga el tractor inmediatamente si alguien ingresa en la zona,
Mantenga las manos y pies alejados de la abertura de descarga de la plataformade corte.
No opere el tractor si el sisterna de
bloqueo funciona rnal. Este sistema fue diseSado para brindade seguridad y proteccion.
15
ADVERTEN contraalg_n objeto
extraho, detengael motor, desconecte el(los) cable(s) dela bujia y conecte el motor a masa;Inspeccione
minuciosarnentepara
vet si la m_quina est_ da_ada: Repare el da_o antes de volver a encender el motor y
operarla m_quina,
Evite arrancar subltamentei desarrollar excesiva velocidad y detenerse de repente;
No abandone el asiento del tractor sin
colocarprimerola
palanca de la potencia de arranque PTO
(enganche de cuchilla en la posici6n(OFF)
(desenganchada),
presionandoel pedal del freno y colocando el freno de mano: Si deja el tractor sin vigilancial tambi_n gire la llave .de encendido a la poslclon
off (apagado)y retirela;
Siempre mire hacia antes y mientras se desplaza marcha atr_s, para evitar un
_
Arranque del motor
ADVERTENClA:No opere el tractor si el
_ seguridad y protecci&n.
NOTA:Consultela secci6nMONTAJEDELTRACTOR en la p_.gina8 de este manualparaobtener
1. Insertela Ilavedel tractoren el m6dulodel interruptor de encendido.
.
Coloquela palancade la potenciade arranque
(PTO)(enganchede cuchilla)en la posici6nOFF
(desconectada).
4.
5.
.
Coloqueel frenode manodel tractor.
Activeel controldel cebador.
Gire la llavede encendidoen el sentidode las agujas del reloj hastala posici6nSTART(ARRANQUE).Una
vezque arranqueel motor,sueltela Ilave.Volver_.a la posici6nON (o de corte normal).
IMPORTANTE:NOmantengala Ilaveen la posici6n
START(ARRANQUE)durantem_.sde diezsegundos por vez.Si Io hace,puedeocasionardaSosal arrancador el_ctricodel motor.
6. Despu_sde quearranqueel motor,desactiveel controldel cebadory coloqueel controldel cebador en posici6nFAST(velocidadr_.pida).
NOTA:NOdeje el controldel cebadoractivadomientras operael tractor.Si Io hace,segenerar_,una mezcla
"rica"de combustibles,Iocualhar_.que el motorpierda intensidad.
Detenci6n del motor
,d_
_ lg#n objeto extra#o,detengael motor, desconecteel(los) cable(s)de labujia y conecteel motor a masa.Inspeccione
minuciosamentepara versi la m#quina est# dafada. Repareel da#o antes de volver a arrancarel motor y operar la m#quina
1. Si las cuchillasestanenganchadas,coloquela palancade la potenciade arranque(PTO)(enganche de cuchilla)en la posici6nOFF (desconectada).
2. Gire la Ilavede encendidoen sentidocontrarioalas agujasdel reloja la posici6nSTOP(detenci6n).
que alguienenciendaaccidentalmenteel motor.
Conducci6n del tractor
ADVERTENCIA
EVITE LESIONES PERSONALES GRAVES O
LA MUERTE
EN LAS PENDIENTESCONDUZCAHACIAARRIBA Y HACIA
ABAJO, NO DE FORMATRANSVERSAL.
EVlTE MANIOBRASDEGIRO BRUSCAS.
NO OPERELA UNIDAD ENAREAS DONDE PUEDEDERRAPAR
0 LADEARSE.
SI LA MAQUlNA SE DETIENE AL SUBIRLA PENDIENTE,
DETENGALAS CUCHILLASY RETROCEDALENTAMENTE
BAJANDO LA PENDIENTE.
NO CORTEEL CESPEDCUANDO HAYANI_IOSU OTRAS
PERSONASCERCA.
NUNCA TRANSPORTENI_IOS,AUN CON LAS CUCHILLAS
DESCONECTADAS.
MIRE HAClA ABAJOY HACIAATRASANTES Y MIENTRAS
OPERA ENMARCHA ATRAS.
MANTENGATODOSLOS DISPOSITIVOSDE SEGURIDAD
(PROTECClONES,ESCUDOSE INTERRUPTORES)ENSU
LUGAR Y EN CORRECTOFUNCIONAMIENTO.
RETIRE LOSOBJETOS QUE PUEDANSER ARROJADOSPOR
LA(S) CUCHILLA(S).
CONOZCALA UBICAClONY FUNClON DETODOS LOS
CONTROLES.
ASEGURESEDEQUE LAS CUCHILLASY EL MOTORSE
DETENGANANTES DE COLOCARLAS MANOS0 LOS PIES
CERCADE LAS CUCHILLAS.
ANTES DE ABANDONAR LA POSICIONDEL OPERADOR,
DESENGANCHELAS CUCHILLAS,COLOQUE LA PALANCADE
CAMBIOS EN POSICIONNEUTRAL,COLOQUEEL FRENODE
MANO, APAGUEEL MOTORY RETIRE LA LLAVE.
LEA EL MANUAL DEL OPERADOR
1. Presioneel pedalde frenopara soltarel frenode mano y deje que subael pedal.
2. Muevala palancadel reguladora la posici6nFAST
(VELOCIDADRAPIDA,representadapor una liebre).
3. Coloquela palancade cambiosen posici6nde
MARCHADIRECTAo MARCHAATRAS.
IMPORTANTE:NOuse la palancade cambiospara cambiarla direcci6nde desplazamientomientraseJtractor est_ en movimiento.Siempreuseel pedal de freno para detenerel tractorpor completoantesde hacerel cambio.
4. Suelteel frenode manopresionandoel pedalde freno-embraguey colocandola palancade controlde velocidaden la posici6ndeseada.
desarrollarexcesivavelocidady detenersede repente.
IMPORTANTE:Losoperadoresque conduzcanel tractor por primeravezdeben usarlas posicionesde velocidad1
6 2. Familiaricesecompletamentecon el funcionamiento del tractory loscontrolesantes de hacerfuncionarel tractoren posicionesde velocidadm_.salta.
DVERTENClA:No abandone el asiento de la potencia de arranque PTO(enganche de cuchilla)en la posicibn (OFF)
(desenganchada),presionando el pedal
de/frenoy colocando el frenode mano.
Si dejael tractor sin vigilancia,tambi#n
gire la I/avede encendidoa la posicibn off
(apagado) y retirela.
Siempremire hacia abajo y hacia atr#s antes y mientras se desplaza marcha arras,para evitar un accidente.
5. Suelteel pedalde freno-embraguelentamentepara poneren marchala unidad.
6. El tractorcorta cesped sedetienepresionandoel pedal de freno-embrague.
NOTA:Cuandose opera la unidadinicialmente,habr_.
una pequeSadiferenciaentrelas dosvelocidadesm_.s
altas hastaque se asientenlas correasen las poleas, duranteel periodode ablande.
16
ADVERTENCIA:Antes de abandonar la posici6n de operador per cualquier razSn, desenganche /as cuchillas, coloque la palanca de eatables en neutral, co/oque
el freno de mane, apague el motor y retire la Ilave.
Evitedetenersecuandosubauna pendiente.Si fuese necesariodetenersernientrassubeuna pendiente, arranquesuavey cuidadosarnentepara reducirla posibilidadde que el tractord_ una volteretahacia atr_.s.
IMPORTANTE:Siernpreque detengael tractorper cualquierraz6nen un _.reade c_sped,haga Io siguiente:
1. Coloquela palancade carnbiosen neutral,
2. Coloqueel frenode mane,
3. Apagueel motory retirela Ilave.
Eso perrnitir_,reduciral minirnola posibilidadde que su cespedresulte"quernado"per el escapecalientedel motordel tractoren funcionarniento.
Si la unidad se detiene con el controlde velocidaden velocidadalta, o si la unidadno funcionacon la palanca de controlde velocidaden posici6nde velocidadbaja, haga Iosiguiente:
1. Coloquela palancade carnbiosen NEUTRAL.
.
Vuelvaa arrancarel motor.
3. Coloquela palancadecontroldevelocidaden la posici6nde velocidadrn_.salta.
4. Sueltecornpleltarnenteel pedal del freno-ernbrague.
5. Presioneel pedal del freno-ernbrague.
6. Coloquela palancade control de velocidaden la posici6ndeseada.
7. Coloquela palancade carnbiosen MARCHA
DIRECTAo MARCHAATRAS,y siga los procedirnientosnorrnalesde operaci6n.
Operaci6n en pendientes
Consultela secci6nINDICADORDE PENDIENTEen la p_.gina3 paradeterrninaren qu_ pendientespuede operarel tractorde rnanerasegura.
_
(elevaciSn aproximada de 2 1/2pies per cada 10pies). El tractor podria voltearse y causar /esionesseveras.
• Corte haciaarriba y abajo de las pendientes,NUNCA en forrnatransversal.
Tengacuidadocuandocarnbiede direcci6nal operar
Enganche de las cuchillas
AIengancharla potenciade arranque(PTO)(enganche de cuchilla)se surninistraalirnentaci6na la plataforrna de corte o a otrosaccesorios(disponiblesper separado).
Paraconectarlas cuchillas,hagaIo siguiente:
1. Muevala palancade controldel reguladora la posici6nFAST(VELOCIDADR_,PIDA,representada per una liebre).
2. Tomela palancade the potenciade arranque(PTO)
(enganchede cuchilla)y girelatotalrnentehacia adelantea la posici6nON (enganchada).
3. Mantengala palancadel reguladoren la posici6n
FAST(velocidadr_.pida;representadaper una liebre), parael use rn_.seficazde la plataforrnade corte o de otrosaccesorios(disponiblesper separado).
IMPORTANTE:Modelos con mode de precauci6nen la potenciade arranque(PTO)est,. enganchadaconla palancade carnbiosen posici6nde rnarchaatr_.scon la
Ilavede encendidoen la posici6nde CORTENORMAL.
Modelos sin mode de precauci6nen marcha atr_s:
La palancade la potenciade arranque(PTO)
(enganchede cuchilla)debe estar en posici6nOFF
(desenganchada)al arrancarel motor,desplazarseen rnarchaatr_.sy cuandoel operadorabandonael asiento.
SFIbConsulteInterruptoresde bloqueode seguridaden la p_.gina14.
Utilizaci6n de la palanca de elevaci6n de la plataforma
Paralevantarla plataforrnade corte,rnuevala palanca de elevaci6nde la plataforrnahaciala izquierda,luego col6quelaen la rnuescarn_.sconvenientepara su aplicaci6n.ConsulteAjustede la alturade corte unas p_.ginasatr_.sen esta rnisrnasecci6n.
ADVERTENCIA
No corte el cesped en
inclinacionesmayores a 15 grades (elevaci6n aproximada de 2
1/2 pies per cada 10
pies). El tractor podria voltearse y causar
lesiones severas.
Est_atentoa loshoyos,surcos,baches,rocas,u otrosobjetosocultos. El terrenodesniveladopuede voltearla rn_.quina.El c_spedalto puedeocultar obst_.culos.
Evite realizargiros cuandoopere en una pendiente.
Si debiera realizarun giro,baje de la pendiente.
Realizarun giro rnientrasse conducecuestaarriba aurnentaenorrnernentelasposibilidadesde que el vehiculod_ una vueltade carnpana.
17
ADVERTENCIA
Para ayudar a evitar el contacto con las cuchillas o una lesion por algun
objeto que sea arrojado, mantenga a las personas que
Io observan, a los ayudantes, niSos y mascotas alejados al menos 25 metros de la m_quina mientras est_
en funcionamiento.
Detenga ia m_quina si alguien traspasa este radio de seguridad.
Planifique el patrbn de corte para evitar que la descarga de materiales se realice hacia los caminos, las veredas, los observadores, etc. Evite adem_s descargar material contra las paredes y
obstrucciones que
podrian provocar que el material descargado rebote contra el operador.
Cortede
cesped lesidn por alg_n objeto que sea
arrojado, mantenga a/as personas que
Io observan, a los ayudantes, ni_os y mascotas alejados al menos 25 metros de la m#quina mientras est# en
funcionamiento. Detenga la m#quina si alguien traspasa este radio de seguridad.
La siguienteinforrnaci6nser_.de utilidadcuandousela plataforrnade cortecon su tractor:
_ materiales se realice hacia los caminos,
/as veredas, los observadores, etc. Evite adem_s descargar material contra /as paredes y obstrucciones que pod#an provocar que el material descargado rebote contra el operador.
• No cortea alta velocidadde piso,especialrnentesi se ha instaladoun juegode abonadorao un colector de c_sped.
• Paraobtenerlos rnejoresresultados,se recornienda realizarlos dos prirneroscortesde cespedarrojando la descargahaciael centro.Despu_sde lasdos prirnerasvueltas,carnbiela direcci6nparaarrojarla descargahaciaafuera,para equilibrarel corte. Esto otorgar_,un rnejoraspectoal cesped.
• No corteel c_speddernasiadocorto. El cespedcorto es propicioparael crecirnientode rnalezas,y se
• El corte del cesped siernpredebe realizarsecon el reguladordel motoral rn_.xirno.
• En terrenosdificiles, puederesultarnecesariopasar por segundavez el tractorcorta c_sped sobreel
_.reayacortada,para obtenerun corte rn_.sprolijo.
• NO intentecortar rnalezasfrondosaso c_sped
ADVERTENCIA
EVITE LESIONES PERSONALES GRAVES
O LA IVlUERTE
• EN LAS PENDIENTESCONDUZCAHACIAARRIBA Y
HACIAABAJO, NO DE FORMATRANSVERSAL.
•
•
•
EVlTE MANIOBRASDEGIRO BRUSCAS.
NO OPERELA UNIDAD ENAREAS DONDE PUEDE
DERRAPARO O LADEARSE.
SI LA M,_QUINASE DETIENE AL DESPLAZARSE
CUESTAARRIBA,DETENGALA(S) CUCHILLA(S)
Y CONDUZCAMARCHA ATRAS,CUESTAABAJO,
LENTAMENTE.
•
,,
•
NO CORTEEL C¢SPED CUANDO HAYAMINOSU
OTRAS PERSONASESTENCERCA.
NUNCA TRANSPORTENI_IOS,AUN CON LAS
CUCHILLAS DESCONECTADAS.
MIRE HACIAABAJO Y HACIAATRASANTES Y
MIENTRASOPERA EN MARCHAATRAS.
,,
,,
,,
MANTENGATODOSLOS DISPOSITIVOSDE
SEGURIDAD(PROTECCIONES,ESCUDOSE
INTERRUPTORES)EN SULUGAR Y EN CORRECTO
FUNClONAMIENTO.
RETIRE LOSOBJETOS QUE PUEDANSER
ARROJADOSPOR LA(S) CUCHILLA(S).
CONOZCALA UBICAClONY FUNClON DETODOS LOS
CONTROLES.
,, ASEGURESEDE QUE LAS CUCHILLAS Y EL MOTOR
SE DETENGANANTES DE COLOCARLAS MANOS0
LOS PIESCERCADE LA(S) CUCHILLA(S).
,, ANTES DE ABANDONAR LA POSICIONDEL
OPERADOR,DESEN GANCHELAS CUCHILLAS,
COLOQUE LA PALANCADE CAMBIOS EN POSICION
NEUTRAL,COLOQUE ELFRENO DE MANO,APAGUE
EL MOTORY RETIRELA LLAVE.
LEA EL MANUAL DEL OPERADOR cortar el cesped,NOpara podar rnalezas.
• Mantengalas cuchillasafiladas,y reernpl_.celas
cuandosedesgasten.Consultela secci6n
Cuchillas de corte en la p_.gina25 de este manual para obtenerinstruccionessobrec6rnoafilar correctarnentelas cuchillas.
18
Abono
Los rnodelosseleccionadosvienenequipadoscon un kit para abonoque incluyecuchillasespeciales, incorporadasal tractorest_.ndar,para la recirculaci6n de recortesde c_sped repetidasveces pot debajode la plataforrnade corte.Los recortesrnuyfinos luego son despedidoshaciaatr_.sparaque se depositenen el cespedy actOencornofertilizantenatural.
Observelos siguientespuntospara obtenerlos rnejores resultadosal realizarel abono:
Nuncaintenterealizarel abonosi el c_spedest,.
hOrnedo.El cespedhQrnedotiendea adherirseal lado inferiorde la plataforrnade corte y no perrnitela adecuadaincorporaci6ndel recortede cespedcorno abono.
NO intentecubrirel cespedcon los recortesrn_.sde
1/3 de la alturatotal de cesped,o aproxirnadarnente
1-1/2pulgadas.De Iocontrariolos recortesde la plataforrnay no sedistribuir_.neficazrnentecorno
abono.
Mantengauna velocidadde pisolentapara perrnitirque los recortesde cesped se distribuyan eficazrnentecornoabono.
Siernprecoloquela palancade controldel regulador en la posici6nFAST(velocidadr_.pida,representada por una liebre),dondedebe perrnanecerrnientras se corta el c_sped. Si el motorno se rnantienecon el reguladora plenose sorneteal motordel tractora un esfuerzomayorque no perrniteque lascuchillas desintegrenadecuadarnentelos recortesde c_sped que se distribuyencornoabono.
NOTA:No es necesarioretirarel canal de descarga paraoperar la cortadorade cesped conel kit de abono instalado.
Figura 4=6
Faros delanteros
• Enalgunosrnodelos,las lucesest&nencendidas cuandoel motordel tractorest,. en funcionarniento.
Enotros rnodelos,los faros seencienden(ON) cada vez que se saca la Ilavede encendidode la posici6n
STOP(detenci6n).
• Entodos los rnodelos,los farosse apagan(OFF) cuandose colocala Ilavede encendidoen la posici6n
STOP(detenci6n).
_ adecuadarnenteinstalado.
Paraoperar la plataforrnade corte sin abonadora, sirnplernenteretirela clavijade abono desenroscandola tuercade rnariposapl_.sticaque la sujetaa la plataforrna de corte. Estoperrniteque los recortesse descarguen por el costado.Wase la Fig.4-6.
ADVERTENCI
cortadora de canal de descarga adecuadamente
NOTA: Este Manual del operador cubre
unagamade
especificaciones de productos de varios modelos. Las caracteristicas y funciones incluidas
!/o ilustradas en este manual pueden no set
_tplicablesa todos los modelos. MTD LLC se reserva el derecho de modificar las especificaciones de los productos, los diseSos y el equipo sin previo awso y s_ngenerar responsabilidad pot obligaciones de ningQn tipo.
i
19
ADVERTENCIA
Nunca intente realizar ningun ajuste si el motor esta en funcionamiento,
excepto segun se especifique en el manual deJ operador.
,_
;,...........
Figura 5-1
Figura 5=2
__j
funcionamiento, excepto seg#n se
especifique en el manua/ del operador.
Nivelaci6n de la plataforma
NOTA:ControJelapresi6nde neumAticosdel tractor antesde realizarcualquiernivelaci6nde la plataforma.
Consultela secci6nNeum_ticos en la p&gina24 para
Nivelaci6n frontal-posterior
El frente de la plataformade corte est&sostenidopor una barraestabilizadoraque se puedeajustarpara nivelarla plataformadesdela partefrontal haciala parteposterior.La partefrontalde la plataformadebe estar aproximadamenteentre1_ y
3/8 de pulgadam_.sabajo que la parteposterior.Deser
necesario,realiceun ajuste de la siguientemanera:
1. Conel tractorestacionadosobreuna superfide firme y nivelada,coloquela palancade elevaci6nde la plataforrnaen la muescasuperior(posid6n m_.salta) y rotela cuchilla Iom_.scerca posiNedel canalde descargapara que quede paralelaal tractor.
2. Midala distanda desdela partedelanterade la punta de la cuchillahasta el piso, y desdela parteposterior de la puntade la cuchillahasta el piso. La primera medici6nobtenidadebe ser entre 1/4"y 3/8" menor que la segundamedici6n.Determinela distancia aproximadanecesariaparaun ajusteadecuadoy, de ser necesario,continQecon el pasosiguiente.
3. Localicela contratuercay la tuercade seguridaddel lado delanterodel soportedel estabilizador.Veala
Fig. 5-1.Despu_sde aflojarla contratuerca:
Aprietela tuercade seguridadparalevantarla parte frontalde la plataforma;
Aflojela tuerca de seguridadpara bajarla partefrontalde la plataforma;
4. CuandoIogreel ajuste adecuado,vuelva a apretarla contratuercaque afloj6antes.
Nivelaci6n lado a lado
Si la pJataformade corte estuvJerarealJzandoel corte de c_spedde forma despareja,puederealizarseun ajuste lado a lad& De sernecesario,realiceun ajustede la siguientemanera:
1. Conel tractorestacionadosobreuna superficiefirme y niveJada,coloquela palancade elevaci6nde la plataformaen la muescasuperior(posici6nm_.salta) y roteambas cuchillaspara que se sitQende forma perpendicularal tractor.
2. Midala distanciadesdela parteexternade la punta de la cuchillaizquierdahastael piso,y desdela parte externade la puntade la cuchilladerechahasta el piso. Lasdos medicionesobtenidasdebenser
iguales.Si no es asi, realiceel siguientepaso.
3. Afloje,pero NOextraiga,el tornillode cabeza hexagonalubicadoen la m_nsulade suspensi6n izquierdade la plataforma.Wase la Fig.5-2.
4. Nivelela plataformacon una Ilaveparagirar el engranajede ajuste(el cualse encuentra inmediatamentedetr&sdel tornillohexagonalque se acabade aflojar)en sentidode lasagujasdel reloj para subNao en sentidocontrarioalas agujas del relojpara bajarJa.La plataformase encuentra correctamenteniveladacuandolasdos mediciones tomadasantesalas puntasde lascuchillasson iguales.
5. Unavez alcanzadoel ajusteadecuado,vuelvaa ajustarel tornillode cabezahexagonalde la m_nsula de suspensi6nizquierdade la plataforma.
20
Ajuste del freno de mano
ADVERTENClA:Nunca intente ajustar los frenos si el motor est& en funcionamiento.
Desenganehe siempre la potencia de arranque (FRO),mueva la palanca de cambios a la posici6n neutral, apague el motor y retire la Ilave,para evitar que alguien eneienda aceidentalmente el motor.
Si el tractorno se detienepor cornpletocuandose presionatotalrnenteel pedalde freno,o si lasruedas traserasdel tractorsiguenrodandocon el frenode rnano colocado,el frenonecesitaajustes.Consulteconsu
distribuidorde servicioMTDautorizado para realizarun ajustecorrectodel freno.
Ajuste del asiento
NOTA:Porrazonesrelacionadascon el envio, los asientossefijan al soportede pivotedel asientodel tractorcon una tira pl&sticao se instalanhaciaatr&s respectodel soportede pivote. Encualquierade los dos casos, saqueel asientode la posici6nde envioy retire los dos tornilloshexagonales(o perillas,en los rnodelos equipadoscon las rnisrnas)de la parte inferiordel asiento antes de seguircon las instruccionesaplicables.
ADVERTENCIA:Antes de operar esta m&quina, aseg(Irese que el asiento est_ enganehado en el tope del asiento, p&rese
detr&s de la m&quinay tire del asiento hacia arras hasta que se enganehe totalmente en el tope.
Asiento est_ndar
Paraajustarla posici6ndel asiento,aflojelosdos tornillos hexagonalesde la parteinferiordel asiento. Desliceel asientohaciaadelanteo haciaatr&s,segQnIodesee.
Vuelvaa apretarlos dostornillos.Wase la Fig.5-3.
Asiento ajustable mediante perillas
(si est_ equipado con las mismas)
Paraajustarla posici6ndel asientoen los rnodelos equipadoscon perillas,aflojelas dos que se encuentran en la parteinferiordel asiento.Wase la Fig.5-4. Deslice el asientohaciaadelanteo haciaatr&s,segQnIodesee.
Vuelvaa apretarlas dosperillas.
Asiento de ajuste r_pido
(si este rnecanismo est_ instalado)
Paraajustarla posici6ndel asientoen los rnodelos equipadoscon una palancade ajustedel asiento,rnueva la palancade ajustedel asiento (ubicadadebajodel asiento)haciala izquierday desliceel asientohacia adelanteo haciaatr&s.Wase la Fig. 5-5. AsegQrese que el asientoest_ fijo en su posici6nantesde operarel tractor.
f
\
Figura 5=3
\
Figura 5=4
21
ADVERTENCIA
Nunca intenteajustar
los frenos si el motor est_ en funcionamiento:
Desenganche siempre la potencia de arranque
(PTO)i mueva la palanca dne cambios a la posici6n eutral, apague el motor y retire la Ilave, para evitar que aiguien encienda accidentalmente el motor.
Antes de operar esta maquina, asegurese que el asiento est_ enganchado en el tope del asiento, parese detras de la m_quina y tire del asiento hacia atras
asta que se enganche otalmente en el tope.
NOTA: Por razones relacionadas con el envio, los asientos se ajustan al soporte de pivote del asiento del tractor con una tira plastica o se instalan hacia atr_.srespecto del soporte de pivote. En cualquiera de los dos casos, saque el asiento de la posici6n de envio y retire los dos tornillos hexagonales (o perillas, en los modelos equipados con las mismas) de la parte inferior del asiento antes de seguir con las instrucciones aplicables.
Manteni
corta
2. Encajea presi6nel extrernopeque5odel rnanguito para drenajede aceiteen el c_.rterde aceite.V6asela
Fig. 6-1.
3. Retireel tap6nde drenajey drene el aceiteen un recipienteadecuadoconcapacidadpara64 onzaspor
Io rnenos.
.
Realiceel mantenirnientodel filtro de aceite (en caso
de estarinstalado)segOnlas instruccionesdel Manual del propietario/operadordel motorque seentregacon la unidad.
Realicelos pasosrnencionadosantes en orden inverso despu_sde terrninarel drenajede aceite.
5. Cargueaceite nuevoen el motor segOnlas instruccionesdel Manualdel propietario/operadordel motorque se entregajuntocon su unidad.
Kohlersimple
ADVERTENCIA cantidady pesoadecuadodel aceitede motoren el
Manualdel propietario/operadordel motorque se entrega junto con la unidad.
Filtro de aire
Realiceel rnantenirnientodel pre-filtro,en caso de estar
Antes de realizar tareas de mantenimiento o reparaciones, desconecte ia potencia de arranque (PTO), mueva la paianca de carnbiosa ia posicibn neutral, coloque el freno de rnano, apague
ei motor y retire la ilave, para evitar que alguien encienda accidentalmente el motor.
Antes de reaiizar tareas de iubricaci6n, reparacibn o inspecci6n, siempre desconecte la potencia de arranque (PTO), ueva ia paianca de cambios a ia posici6n eutral, coloque el freno de mano, apague
el motor y retire ia iiave, para evitar que aiguien encienda accidentaimente ei motor.
_S simple
Figura 6=1 j
_ DVERTENCIA:Antes de rea/izar tareas desconecte la potencia de arranque
(PTO),mueva la palanca de cambios a la posici6n neutral, coloque el freno
de mano, apague el motor y retire la
#ave,para evitar que alguien encienda accidentalmente el motor.
Motor
Consulte lasinstruccionesde mantenimiento del motor en el Manualdel propietario/operadordel motor.
Controleel nivel de aceite del motor antes de usar motorque se entregajuntocon la unidad.
Bujia(s)
Es necesariolirnpiarla(s) bujia(s)y reajustarla separaci6nuna vez por ternporada. Se recorniendareernplazar la bujiaal cornienzode cadaternporadade corte de c_sped.Consulteel tipode bujia correctay lasespecificacionesde separaci6nen el Manualdel propietario/ operadordel motor.
Lubricaci6n
ADVERTENCIA:Antes de rea/izar tareas de lubricaci6n, reparaci6n o inspecci6n, siempre desconecte la potencia de arranque (PTO),mueva la palanca de cambios a la posici6n neutral, co/oque el
freno de mano, apague el motor y retire la #ave,para evitar que alguien encienda accidenta/mente el motor.
Motor
Lubriqueel motorcon aceitede motorsegOnlas propietario/operadordel motorque se entregacon la rnisrna. Siga las instruccionescon atenci6n.
Cambio del aceite del motor
Paradrenarel aceitedel c&rterdel motoren ciertos rnodelosde tractores,se entregaun rnanguitopl&stico para drenajede aceitejuntocon el Manualdel operador.
Paradrenarel aceite,procedade la siguienternanera:
1. Aflojeel tap6n de Ilenadode aceite y retirela varilla de rnedici6ndel tubo de Ilenadode aceite.
entregajuntocon la unidad.
Puntos de pivote y varillaje
Lubriquetodos los puntosde pivotedel sisternade irnpulsi6n,el frenode rnanoy el varillajede elevaci6nal rnenosuna vez por estaci6ncon aceiteligero.
Ruedas traseras
Las ruedastraserassedeben retirarde los ejesuna vez por estaci6n.Lubriquelos ejesy las Ilantasadecuadarnentecongrasa rnultiusoantesde volvera instalarlos.
Ejes delanteros
Cadaextrernode la barra de pivotedelanteradel tractor puedeestar equipadacon un accesoriode engrase.
Lubriquecon pistolade grasacada25 horasde funcionarnientodel tractor.
22
Limpieza del motor y de la plataforma
Si se derrarnacombustibleo aceitesobrela rn_.quina, debelirnpiarsede inrnediato.NO perrnitaque se acurnulen desechosalrededorde lasaletasde refrigeraci6ndel motorni en ningunaotrapartede la rn_.quina.
de presi6nparalirnpiarel tractor.Puedeproducirda_osa
loscornponentesel_ctricos,husillos,poleas,rodarnientos o al motor.
Deck Wash System
TM
En la superficiede la plataforrnadel tractorhayun tarugo hexagonal.Wase la Fig.6-2.
Estetarugose puedereernplazarpor un puertode agua a serusadocornopartede un sisternade lavadode la plataforrnadisponiblepor separado.
paralavarla parteinferior de la plataforrnay quitarlos recortesde c_spede irnpedir la acurnulaci6nde sustanciasquirnicascorrosivas.
NOT.4:Consultela inforrnaci6nsobreestey otros aditarnentosy accesoriosparasu tractorque seobtienen por separadoen la p_.gina28.
Extracci6n de la plataforma de corte
NOTA:Losrnodelosequipadosconplataforrnade 38 pulgadastienenuna poleaIocade plataforrna.Losrnodelos
equipadoscon plataforrnade 42 y de 46 pulgadastienen dospoleasIocasde plataforrna.
Paraextraerla plataforrnade corte,procedade la siguienternanera:
1. Coloquela palancade la potenciade arranque
(PTO)(enganchede cuchilla)en la posici6nOFF
(desconectada)y coloqueel frenode rnano.
2. Bajela plataforrnarnoviendola palancade elevaci6n de la plataforrnadentrola rnuescainferiordel guardabarrosderecho.
3. Retirela correade alrededorde la poleadel motor del tractory de la(s) polea(s)Ioca(s).Consultelas
instruccionesdetalladasen la p_.gina26, Carnbiode la correade la plataforrna.
4. Mirandola plataforrnade cortedesdeel lado izquierdo del tractor,Iocalicela abrazaderade horquillaque ajustala varillade soportede la plataforrnadel lado izquierdode la plataforrna.Wase la Fig.6-3.
5. Retirela abrazaderade horquillaqueajustala varilla de soportede la plataforrnay concuidadoretireel soportede la plataforrnadel brazode elevaci6nde la plataforrna.
6. Repitalospasosanterioresdel ladoderechodeltractor.
7. Muevala palancade elevaci6nde la plataforrnadentro de la rnuescasuperiordel guardabarrosderechopara levantarlos brazosde elevaci6nde la plataforrnay retirarlosdel paso.
8. Concuidadoretireel cablede la potenciadearranque
(PTO)de la plataforrnade corte,retirandola abrazadera de horquillaque Ioajusta.Retireel resortedel soporte la partedelanteradel tractor,perrnitiendoquelos ganchosde la plataforrnasesueltende la varilla estabilizadorade la plataforrna.
ladoderecho)haciaafueradesdela parteinferiordel tractor.
23
Figura 6=2
Figura 6=3
Figura 6=4
NOTA: Los modelos
_quipadoscon plataforma de 38 pulgadas tienen una polea Ioca de plataforma. Los modelos equipados con plataforma de 42 y de 46 pulgadas tienen dos poleas Iocas de plataforma.
Neum_ticos Arranque pot medio de cone×i6n en puente
ADVERTENCIA
Nunca exceda la
presi6n m_xima de inflado que se indica en los laterales de los neum_ticos.
AI cargarse, las baterias emiten un
gas que puede causar explosiones. Cargue
la bateria en un _rea bien ventilada, y
al_jela de una llama abierta o luz piloto,
como pot ejemplo calentadores de agua, calefactores de ambiente, hornos, secadores de ropa u otros aparatos a gas.
Para el reemplazo utilice siempre un fusible que posea la misma capacidad de amperaje.
_ DVERTENCIA:Nunca excedala presi6n laterales de los neum&ticos.
• Aproxirnadarnente10psi para los neurn_.ticos
traseros
• Aproxirnadarnente14psi para los neurn_.ticos
delanteros
IMPORTANTE:Consultelos lateralesde las ruedas para conocercon exactitudla presi6nmaximaen psi recornendadapor el fabricante.No inflelos neurn_.ticos
en exceso.Unapresi6nde neurn_.ticosdespareja
podria hacerque la plataforrnacorte el c_speden forrna desigual.
Bateria
La bateriaest,. selladay no necesitarnantenirniento.
Los nivelesde _.cidono sepuedencontrolar.
• Siernprernantengalirnpiosy libresde acurnulaci6nde elernentoscorrosivoslos cablesy los bornesde la bateria.
• Despu_sde lirnpiarla bateriay los bornes,aplique una capadelgadade vaselinao grasaa arnbos bornes.
• Siernprernantengalos capuchonesde gorna colocadossobreel borne positivopara prevenirun cortocircuito.
IMPORTANTE:Si por alguna raz6nextrae la bateria, desconecteprirneroel cableNEGATIVO(negro)de su borney a continuaci6nel cable POSlTIVO(rojo).Cuando vuelvaa instalarla bateria,conectesiernpreprirnero el cable POSITIVO(rojo)a su borne,y a continuaci6n el cable NEGATIVO(negro).AsegQreseque los cables est_nconectadosa los bornescorrectos,ya que si los carnbiase podria invertirla polaridady provocarun daSoal sisternaalternadordel motor.
Carga de la bateria
IMPORTANTE:Cuandocarguela bateriade sutractor, utilice Qnicarnenteun cargadordiseSadopara baterias propietariocorrespondienteal cargadorde la bateria antesde cargarla bateriadel tractor.Siernpresigalas
instruccionesy tengaen cuenta lasadvertencias.
Si sutractorno se ha utilizadoduranteun periodode tiernpoprolongado,carguela bateriade la siguiente rnanera:
• Ajusteel cargadorde bateriapara que produzca un m_.xirnode 10amperes.Si el cargadorde su
,_ ADVERTENCIA:Cuando retire o instalela que el destomillador cause un cortocircuito al entrar en contacto con la plataforma.
IMPORTANTE:Nuncaconecteen puentela bateria agotadadel tractorcon la bateriade un vehiculoen funcionarniento.
1. Conecteel extrernode un cablede puenteal borne positivode la baterfaen buenestado,luegoel otro extrernoal bornepositivode la bateriaagotada.
2. Conecteel otrocablede puenteal borne negativo de la bateriaen buen estado,luegoal marco de la unidad con la batedaagotada.
3. Pongaen marcha el tractor seg_n se indicaen la
p_gina15.
_ y podria explotar el gas de cualquiera de las baterias.
Limpieza
Lirnpiela bateriaretir_.ndoladel tractory lav_.ndolacon
una soluci6nde agua y bicarbonato.Si es necesario, raspelos bornesde la bateriacon un cepillode alarnbre para quitarlosdep6sitos.Recubralos bornesy loscables expuestoscongrasao vaselinapara prevenirla corrosi6n.
Desperfectos de la bateria
A continuaci6nse rnencionanalgunascausascornunes de desperfectosen las baterias:
• activaci6ninicialincorrecta • cargainsuficiente
• excesode carga • corrosi6nen las conexiones
• congelarniento
Estos desperfectos NO est_ncubiertos pot la garantia del tractor.
Fusible
En el rnazode cablesde sutractorhay un fusiblede 20 amperesinstaladopara protegerel sisternael_ctricodel tractorde daSoscausadospor excesode arnperaje.
Si el sisternaelectricono funciona,o el motorde su tractor no arranca,verifiqueprirneroque el fusible no se haya quernado.Lo podr_,encontrardebajodel cap6 rnontado detr_.sdel panelde instrurnentosdel ladoderecho.
,_
siempre un fusible que posea la misma
ADVERTENCIA:Para el reemplazo utilice capacidad de amperaje.
cargadorindiqueque se ha cornpletadola carga.
ochohorascornorninirno.
,_ ADVERTENCIA:AI cargarse, las bate#as
explosiones. Carguela bateria en un &rea bien ventilada, y al_jela de una llama abierta o luz piloto, como por ejemplo calentadores de agua, calefactores de ambiente, homes, secadores de ropa u otros aparatos a gas.
24
i_i i _i_I :_ ii iii
Cuchillas de corte
ADVERTENClA:Aseg(_resede apagar
el motor, retirar la #avede encendido y desconectar el (los) cable(s) de bujia y masa del motor para evitar el arranque accidental del mismo antes de retirar la(s) cuchilla(s) de torte para afilarla(s) o reemplazarla(s). Prot_jase las manos usando guantes gruesos o un trapo para agarrar la cuchilla de corte.
ADVERTENClA:Inspeccione
peri6dicamentelos husillos de las cuchillas para controlar si hay fisuras o dafios, especialmente despu_s de golpear un objeto extra_o. Reemplace de inmediato si est&n dafiados.
Lascuchillasse puedenextraer de la siguienternanera.
1. Extraigala cubiertade la parteinferiordel tractor,
(consultela secci6nExtracci6nde la plataforrnade corte en la p_.gina23); luegovoltee condelicadezala plataforrnapara dejaral descubiertosu parteinferior.
2. Coloqueun bloquede rnaderaentreel deflectordel alojarnientocentral de la plataforrnay la cuchillade corte,para que act_ecornoestabilizador.V_asela
Fig. 6-5.
3. Extraigala tuercade brida hexagonalque asegurala cuchillaal rnontajedel husillo.Wase la Fig.6-5.
4. Paraafilar lascuchillasde corte de forrnaadecuada, extraigacantidadesigualesde metal de arnbos extrernosde lascuchillasa Iolargo de los hordes cortantes,de forrnaparalelaal hordede caida, a un
_.ngulode 250a 30°.
IMPORTANTE:Si el bordede cortede la cuchillaya ha sidoafilado,hasta dentrode una distanciade 1 5/8" del horde,o si existeunaseparaci6nde metal,reernplace las cuchillaspor otras nuevas.Wase la Fig.6-6.
• Es irnportanteque cada hordede la cuchillade corte seapulido por igual para rnantenerel equilibrio adecuadode la cuchilla.
• Unacuchilladesequilibradacausar_,vibraci6n excesiva,y puedeocasionardaSosrnaterialesal tractor y lesionespersonales.Se puedeprobarla eje circular•Nile el metaldel lado pesadohasta que quedebien equilibrada.
• Cuandoreernplacela cuchilla,asegQresede instalarlacon el lado rnarcado"Bottom"(inferior)
(o conel lado que poseeun nQrnerode pieza estarnpado)rnirandoal pisocuandola cortadorade cespedest,. en posici6nde operaci6n.
IMPORTANTE:Utiliceuna Ilavede torsi6npara ajustar la tuerca de brida hexagonaldel husillode la cuchilla entre70 pies-librasy 90 pies-libras.
f
Figura 6-5
Figura 6-6
PoleasIocas
Tuercasde
Figura 6-7
25
ADVERTENCIA
Asegurese de apagar el motor, retirar la lave de encendido y desconectar el (los) cable(s) de bujia y masa del motor para evitar el arranque accidental del mismo antes de retirar la(s) cuchiHa(s) de corte
para afilarla(s) o reemplazarla(s).
Prot_jase las manos usando guantes
gruesos o un trapo
para agarrar la cuchilla de corte.
lnspeccione peri6dicamente los husiHos de las cuchiHas para controlar si hay fisuras o dafios, especialmente despues de golpear un objeto extrafio.
Reemplace de
inmediatosi est_n dafiados.
ADVERTENCIA
Asegurese de apagar el motor, retirar la
Ilave de encendido y desconectar el (los) cable(s) de bujia y masa dei motor para evitar el arranque accidental del mismo antes de retirar ia correa.
Evite la posibilidad de lesiones pot
compresion. AI extraer la correa, cuide de no colocar sus dedos en el resorte intermedio o entre la correa y una polea.
Cambio de la correa de la plataforma
,& lesionespor compresiSn.AI extraerla correa,
,_ el motor, retirar la Ilave de encendido y desconectar el (los) cable(s) de bujia y masa del motor para evitar el arranque accidental del mismo antes de retirar la correa.
7. Retirela correade la plataformade alrededorde todas las poleas,incluidala polea Iocade la phtaforma.
8. Instalela correanuevasegQnse muestraen las
Todaslascorreasdel tractorest_.nsujetasa desgaste, y se las debe cambiarsi se presentansignosde desgaste,
Fig. 6-8, 6-9 6 6-10.
9. Reensamblelasdefensasde la correaque extrajo anteriormente.
IMPORTANTE:Lascorreasen V del tractorest_.n
diseSadasespecialmenteparaque seengraneny
Cambio de la correa
(plataformas de 46")
inferior de la plataforma desengranensin riesgos.El uso de una correaen V NOTA:Paracambiarla correainferiorde la plataformadel sustituta(que no seadel fabricantedel equipooriginal) tractores necesarioextraervarioscomponentes.P6ngase
puederesultarpeligrososi la mismano se desengrana en contactocon un Distribuidorde Servido MTDautorizacompletamente.Paraque la m&quinafuncionede manedo para hacercambiarla correade transmisi6ninferior,o ra adecuada,usecorreasaprobadaspor el fabricante.
Ilamepor tel_fonoa Atenci6nal Client& seg_nIoindicado
Paracambiaro reemplazarla correade la plataformade en la p_.gina2, para informarsesobrela formade pedirun su tractor,procedade la siguientemanera: Manualde mantenimiento.
1. Baje la plataformamoviendola palancade elevaci6n de la plataformadentrola muescainferiordel guardabarrosderecho.
Oambio de la correa de transmision
NOTA:Es necesarioretirarvarioscomponentesy
2. Extraigalas defensasde la correaretirando herramientasespeciales(es decir,Ilavede impacto/aire) los tornillosautoroscantesque las sujetana la plataforma.
3. Extraigala varilladel fiadorde la correaque est,.
para cambiarla correade transmisi6ndel tractor.
P6ngaseen contactoconun Distribuidorde ServicioMTD autorizadoparahacercambiarla correade transmisi6n,o
Ilamepor tel_fonoa Atenci6nal Client& segQnIoindicado alrededorde la polea del motor, en la p_.gina2, para informarsesobrela formade pedirun
4. Onicamenteen la plataformade 42 pulgadas,afioje Manualde mantenimiento.
sin sacarlas tuercasde la poleaIoca.Esto permitir_.
retirarf_.cilmentela correade las poleasIocas.
V_asela Fig. 6-7 en la p_.ginaprevia.
Soportede poleaIoca
Poleadel motor
X
X
Plataformade38 pulgadas
©
PoleasIocasde la plataforma
Figura 6=8
26
f
Soportede polea Ioca
Poleadel motor
\
0 f
,..
PoleasIocasde la plataforma
Figura 6=9
j
Piataformade46 pulgadas
0
lVlantenimiento del tractor corta c_sped
Cubiertade la correa Poleadel motor
Figura 6=10
27
©
Limpiey lubriqueel tractortal como se indicaen la
CORTACESPEDen la p_.gina19de este manualantes de almacenarla unidadpor un periodoextenso.
aJmacenamientoy especificaciones del Manualdel propietario/operadordel motorpara consultarel servicio adecuadodel motorantesde almacenarel tractor.
Alma namiento
,_ aprobado yen un lugar a/aire libre, lejos de
cualquierllama expuesta.Dejeque e/motor se enfrie.Antes de drenar el combustible, apague cigarrillos,cigarros,pipas y otras fuentesde combusti6n.
_ en un espacio cerrado donde haya fuego, chispas o luz piloto como pot ejemp/o, de ca/entadores de agua, homos, secadores de ropa u otros aparatos a gas.
Aditamentos y accesorios
Lossiguientesaditamentosy accesoriossoncompatiblescon losTractoresCorta C_spedModeloSerie 700.
Consulteal minoristaa quien le compr6el tractor, a un distribuidorMTDautorizadoo Ilameal tel_fono
(800)800-7310para obtenerinformaci6nsobreprecioy disponibilidad.
NOTA:LosTractoresCortaC_sped ModeloSerie700 NO hansido diseSadospara serutilizadoscon accesorios que penetranen el suelo(como,por ejemplo,cultivadoraso arados). El usode este tipo de equipamiento
INVALIDAR_,la garantiadel tractor.
ADVERTENCIA
Drene eJcombustible
_nicamente dentro de un recipiente aprobado y en un lugar al aire libre, lejos de cuaJquier llama expuesta. Deje ique el motor se enfrie.
Antes de drenar el
' combustibJe, apague i cigardllos, cigarros, i pipas y otras fuentes i de combusti6n.
0EM-190-032 M_.quinaquitanievede dosetapas,de 42"
0EM-190--1i6 ' Juegode abonadoraconplataformade 38/42 puigadaS
0EM-190-118 Juegode abonadoraconplataformade 46 pulgadas
OEM-19Oq80 ' Colectorde c_spedcon sistemade embolsadodObie(paraplataformasde 38/42!')
0EM-190-182 Colectorde cespedcon sistemade embolsadodone (paraplataformasde 46")
0EM-190-183 Juegode ruedasparaplataforma
0EM-190-218 Juegode contrapesode ruedastraseras
OEM-190-607" "Parasolde luj0 para tractor
0EM-190-658 Cadenaspara los neum_.ticos,
-0EM-190:672 Protectorparrilla(se instalaen la partedelanteradel tractor)
0EM-190-833 Cuchillade 42"para orugadelantera
490--900-0025 Juegode lavadode plataforma
*No es compatiblecon los tractoresequipadoscon un colectorde pasto i Nunca almacene la im_quina o el recipiente de combustible en un espacio cerrado
Idonde haya fuego, chispas o luz piloto
como pot ejemplo, de calentadores de agua, i hornos, secadores de iropa u otros aparatos a gas.
28
Etiquetas
29
ROTATING BLADES CAUSE
SERIOUS INJURY OR
DEATH
• D0 HOTMOW WHEI CHILIREI OR
OTHERSAREAROOID
• lEVER CARRYCHILDREI EVEI
WITH BLADEIS) OFF.
• L001( DOWI AID IEHIID BEFORE
®
ADVERTENCIA
La presenciade este sfmbolo indicaque se trata de instrucciones importantesde seguridad que debe respetarpara evitar poner en riesgosu seguridad personaly/o materialy la de otras personas.Lea y siga todas las instrucciones en este manualantes de iniciarla operaci6n de esta mD.quina.En
caso de no seguir estas instruccionespodrfa provocarlesiones personales.Cuando
vea este sfmbolo.
iTENGA EN
CUENTAS LAS
ADVERTENCIAS!
Su responsabilidad
Restrinja el uso de esta aquina motorizadaa las personas que lean, comprendan y respeten las advertencias e instruccionesque figuran en este manual yen la maquina.
Si de i" problemas
Problema
E motor no arranca
Si es necesario
i realizarreparaciones
que exceden un simple ajuste come los que aqui se incluyen, pSngase en contacto con un distribuidor autorizado de servicios de
I mantenimiento.
El motorfuncionade maneraerra.tica
Causa Soluci6n
1. Potenciade arranque(PTO) enganchada,
2. Se ha(n) desconectadoel(los) cable(s)de la bujia,
1. Coloquela perilla (o palanca)de la potenciade arranque(PTO)en posici6nOFF (desenganchada)
2. Conectee (los)cable(s) a la(s) bujia(s).
3. El dep6sitode combustibleest,. vacio 3. Lene el dep6sitode combustible o el combustiblese ha echadoa con gasolinalirnpiay nueva.
perder.
4. No se ha activadoel cebador.
4. Tire del controldel CEBADOR(en caso de estar instaado) o coloque el controldel reguladoren la posici6nCEBADOR.
5. La bujia no funcionacorrectarnente.
6. La lineadel Combustibleest& bloqueada,
5. Lirnpieo carnbiela bujia o ajuste la separaci6n.
6. Lirnpiela linea de cornbustbleo cambieel filtro de cornbustble s est#tinstalado.
7 Motorahogado.
7. Arranqueel motorconel regulador en posici6nFAST(velocidad r_tpida).
8. No est,. colocadoel frenode rnano.
9. La palancade controldel regulador no esta en la posici6nde arranque correcta,
8. Coloqueel frenode rnano.
9. Muevala palancadel regulador a la posici6nFAST(velocidad rapida).
1. La unidadesta funcionandocon el
CEBADORactivado.
2. Se ha(n) desconectadoel(los) cable(s)de la bujia.
3. La lineadel combustibleesta bloqueadao el combustiblese ha echadoa perder.
1. Presioneel controldel CEBADOR
(on casode estar instalado)o rnuevael controldel regulador fuerade la posici6nCEBADOR.
2. Conectey ajusteel(los) cable(s) de la bujia.
3. Lirnpiela linea del combustible;
Ileneel dep6sitocon gasolina lirnpiay nueva(que tengarnenos de 30 dias). Reernplaceel filtro de combustible,si la unidadcuenta con uric.
4. Destapela ventilaci6no 4. La ventilaci6nen la tapadel combustibleest&obstruida.
5. Aguao suciedaden el sisternade combustible.
6. El depuradorde aire est&sucio.
5. Vacieel dep6sitode combustible.
CarguecornbustiNenuevoen el dep6sito.
6. Carnbieel cartucho/elernentodel filtro de aire o lirnpieel prefiltro,en caso de estar instalado.
30
Problema
El motor recalienta
El motor vacila en
RPM altas
Func °nama en m a cha le ta
Excesiva vibraci6n
Causa
El nive!de aceitedel motores bajoi
21 Flujode aire restringido:
Sol uci6n
ii L!eneel CArterdel motorConaceite adeCuadol
2, Lirnpielos recortesde pastoy
Suciedadacurnuladosalrededorde
!as aletasde refrigeraci6nde motor y del alojarnientodel Soplador.
1. La separaci6nde la(s) bujia(s)es rnuy pequeSa.
i: Bujia(S)at0rada(s)averiada(S)o
2iEI excesodeSeparac6n _ depuradorde aire estAsuciol
1. Retirela(s) bujia(s)y reajustela separaci6n.
!: cambie ia(s)bujia(s)!configure ia separac6nde a(s)bujia(s)
Cambieei cartuchoielementode!
fi!tro de aire 0 limpieel piefi!tro'en caso de estar instalado:
1. Cuchillade corte flojao descentrada.
2. Cuchillada_adao curvada.
1. Aprietela cuchillay el husillo.
Estabilicela cuchilla.
2. Reernplacela cuchilla.
La cortadora de cesped" n o rea liz a el abono con lOS r^^.r,_^ .^ ^.
UL;U tub LIU L;Ub_JULI
....
(moclelos equlpaaos con el dispositivo de abono)
1. La velocidaddel motores dernasiado enta.
2.
C#sped hOrnedo.
3. C_spedexcesivarnentealto.
1. Coloqueel controldel reguladoren a posc 6n.FAST(veoc.dad, rapda, representaaapor una ueDre).
2 No corte e c6spedcuandoest6
.....
rnojaao esperenasta quesea rnas tarde para hacero.
3. Corteel c_speduna vez a una alturaalta, luegovuelvaa cortar a
!i
il i ii iiiiiii ill
ii
_ ii i i i
mas
Si es necesario realizar reparaciones que exceden un simple ajuste como los que aqui se induyen, p6ngase en contacto con un distribuidor autorizado de servicios de nantenimiento.
i i
Corte desigual 1. La plataforrnano se encuentra correctarnentenivelada.
2. La cuchillade la cortadorano estA afilada.
3. Presi6ndesigualde neurnAticos.
1. Realiceel ajuste lado a lado.
2. Afileo carnbiela cuchilla.
3. Verifiquela presi6nde los cuatro neurnAticos.
31
Para pedir piezas de reempiazo, liame al
1-330-220-4683,
1-800-800-7310 o visite www.
mtdproducts.com
WARNING
!
si rasgo ese,
correctamente, no use
€ontacto con su distri' buidor servicio MTD
autorizado o Uamada
I _ ii i _ _ i_
)Este Manual del
Operador Cubre una gama de especificaciones de produCtosde ratios modelosl Las caracteristiCas funci°nes incluidas y!o !lustradasen este manual pueden no ser
aplicablesa todos los
mOdeloslMTD LEO
MTD LLC se reserva ei
I derecho de modlflcar las especificacionesde los productos los dise_os y el equipo sinprevio aviso y sin generar resp obligaciOnesde ningOn comuniquesepor tel_fonoal (800) 800-7310paracomprarun Manualde Piezasde Repuesto.
AsegOresede tenera manoel nOmerode modeloy el nQmerode serie.Esta informaci6nse encuentraen la placa de modeloubicadadebajodel asiento.Consulte(ap_.gina2 para obtener m&sinformaci6nsobrela ubicaci6nde sus nOmerosde modeloy de serie.
Correade transmisi6n 754-04001A
Correade transmisi6n(plataformade corte) Plataformade 38"
Correade transmisi6n(plataformade corte) Plataformade 42"
Correade transmisi6nsuperior(plataformade corte) Piataformade 46"
754-04062
754-04060B
754-04142
Correade transmisi6ninferior(plataformade corte) Plataformade 46"
Cuchillasde plataforma(Piataformade 38"- dos en cada una)
754-0349
742-0610A
Cuchillade plataforma(Plataformade 42") 742-0616A
Cuchillade plataforma(Plataformade 46") Cuchillacentral(una en cada una) 742-0612A
Cuchillade plataforma(Plataformade 46") Cuchillaexterior(dosen cadauna) 742-0611A
Husillode plataforma(Plataformade 38") 618-04197
Husillode plataforma(Plataformade 42")
Husillode plataforma(Plataformade 46") Poleadoble (unaen cadauna)
Husil(ode plataforma(Plataformade 46"- dos en cada una)
Ruedasde plataforma
618-04456
618-04134B
618-0240A
734-0973
Bateria(13 hp Tecumseh)
Bateria(15,5hp Briggs& Stratton)
Neum_.tico(delantero)15 x 6 x 6 reborderedondo
Neum&tico(delantero)15 x 6 x 6 rebordecuadrado
725-1704A
725-1737A
734-0864
734-1731
Neum_.tico(trasero)20 x 8 x 8 reborderedondo
Neum_.tico(trasero)20 x 8 x 8 rebordecuadrado
Tapadel buje
Tap6ndel dep6sitode combustible
Controlde cebador/cable(Motoresde dos cilindros)
Controlde regulador/cable(Motoresde un cilindro)
Asambleade Tolvade Descarga
734-1596
734-1730
731-0484A
951-3111
746-1085A
746-04258
931-1032B
32
NOTAS
Utilice esta p_gina para tomar notas y escribir la informaci6n importante.
33
NOTAS
Utilice esta p_gina para tomar notas y escribir la informaci6n importante.
34
DECLARAClON DE GARANTJA DEL CONTROL DE LAS EMISIONES DE CALIFORNIA
DERECHOS Y OBLIGAClONES DE SU GARANTJA
El Consejode RecursosA@eosde Californiay MTDConsumerGroup Inc.se complacenen explicarla garanfiadel sistemade controlde emisionespor evaporaci6nde su cortadorade cesped 2007.En California,las nuevas maquinaspara cortarcespedse debendiseSar,construiry equiparde modo de cumplir con las rigurosasnormascontra la poluci6ndel estado. MTDConsumerGroup Inc. debe garantizarel sistemade control de emisiones porevaporaci6n(EECS) de su cortadorade cespedpot el periodode tiempo indicadom_s abajo, siemprey cuando no exista uso incorrecto,negligenciani mantenimientoinadecuadode dicha cortadorade cesped.
El sistema EECSpuedeincluir piezastales comoel carburador,el sistemade inyecci6nde combustible,el sistemade encendido,el convertidorcatalitico, los dep6sitosde combustible,las lineas de combustible,los taponesde combustible,las v_lvulas, contenedores,filtros, manguerasde vapor, abrazaderas, conectoresy otros componentesafinesrelacionadoscon las emisiones.
Donde e×ista una condiei6n eubierta por la garantia, MTDConsumer Group Inc. reparar_ su eortadora de e_sped sin eosto alguno ineluyendoel diagn6stieo, las piezas y la mano de obra.
COBERTURA DE LA GARANTJA DEL FABRICANTE:
Este sistemade control de emisionespot evaporaci6nse garantizaporel t@minode dos aSos.Si alguna parte de su equipo relacionadacon las emisionespot evaporaci6nes defectuosa,MTDConsumerGroup Inc. reparar_o sustituir_dicha parte.
RESPONSABILIDADES DEL PROPIETARIO SEGUN LA GARANTJA:
En su car_cterde propietariode la cortadorade cesped,ustedes responsabledel mantenimientorequeridoquese especificaen el manualdel propietario. MTD
ConsumerGroup Inc.le recomiendaqueconservetodos los recibosque cubrenel mantenimientode su cortadorade cesped, no obstanteIo cual MTDConsumer
Group Inc. no podr_denegarel cumplimientode la garanfia Qnicamentepor la falta de los recibos.
Comopropietariode la cortadorade cesped, usteddebe saberque MTDConsumerGroup Inc. puede denegarla coberturade la garanfia si su cortadorade cespedo una pieza de la mismafallan debido a uso incorrecto,negligencia,mantenimientoindebidoo a modificacionesno aprobadas.
Ustedes responsablede presentarla cortadorade cespedal centro de distribuci6no de mantenimientode MTDConsumerGroup Inc.tan prontocomoaparezca el problema.Las reparacionescubiertaspor la garanfia se deben Ilevara caboen un lapso razonableque no excedade 30 dias. Si tiene algunapregunta respectode la coberturade la garanfia, p6ngaseen contactocon el Departamentode Mantenimientode MTDConsumerGroup Inc. al telefono1-800-800-7310.
COBERTURA DE LA GARANTJA DE EMISIONES GENERALES:
MTDConsumerGroup Inc. garantizaal compradorfinal y a cadacompradorsubsiguienteque la cortadorade cesped: est_ diseSada,construiday equipadade modo de cumplircon todas las regulacionesaplicablesy quese encuentralibre de defectos de materialesy de fabricaci6nque pudierencausar la falla de una pieza garantizadaidentica,en todos los aspectosmateriales,a la pieza descriptaen la solicitud de certificaci6n de MTDConsumerGroup Inc.
El periodode garanfia comienzaen la fechade entregade la cortadora al compradorfinal o en la fecha en que la m_quinase poneen funcionamientopot primera vez. El periodode garanfiaes de dos aSos.
Sujetoa ciertas condicionesy exclusionesquese indicana continuaci6n,la garanfia de las piezas relacionadascon las emisioneses la siguiente:
1. Cualquierpieza garantizadaque no este programadapara ser reemplazadacomo parte del mantenimientorequeridoen las instruccionesescritas suministradasse garantizapor el periodode garanfiaarribamencionado.Si la pieza falla duranteel periodode coberturade la garanfia, la mismaser_ reparadao reemplazadapor MTDConsumerGroup Inc. de acuerdo con el p&rrafo(4) a continuaci6n.Cualquier pieza reparadao reemplazadasegQnla garanfiase garantizar&pot el restodel periodo de garanfia.
2. Cualquierpieza garantizadaque este programadasolamentepara inspecci6nregularen las instruccionesescritassuministradasse garantizapot el periodo de garanfia arribamencionado.Cualquierpieza reparadao reemplazadasegQnla garanfiase garantizar_por el restodel periodo.
3. Cualquierpieza garantizadaque este programadapara reemplazosegQnel mantenimientorequeridode conformidadcon las instruccionesescritas suministradas,se garantizapor el periodode tiempo anterior a la primerafecha de reemplazoprogramatic paraesa pieza.Si la piezafalla antesdel primer reemplazoprogramatic,la mismaser_ reparadao reemplazadapot MTDConsumerGroup Inc.de acuerdocon el p&rrafo(4) a continuaci6n.Cualquier pieza reparadao reemplazadabajo garanfiase garantizar&pot el restodel periodo anterioral primerreemplazoprogramatic puntualpara esa pieza.
4. La reparaci6no el reemplazode cualquierpieza garantizadade conformidadcon las disposicionesde la garanfia queaqui se estipulasedebe realizar en un centro de servicio t@nico sin costo algunopara el propietario.
5. No obstantelas disposicionesque aqui se estipulan, los servicios o reparacionesbajo garanfiase suministrar_nen todos nuestroscentrosde distribuci6nbajo franquiciade mantenimientopara los motoreso equipo en cuesti6n.
6. El propietariode la cortadorade cespedno deber_ pagarel trabajo de diagn6sticodirectamenteasociadocon una pieza garantizadadefectuosaen relaci6n con las emisiones,siemprey cuando dichotrabajo de diagn6sticose realiceen un centro de garanfia.
7. MTDConsumerGroup Inc.es responsablepot daSosy perjuicioscausadosa otros componentesde motoreso equipo derivadosde la falla bajo garanfiade cualquierpiezagarantizada.
8. Durantela totalidad del periodode garanfiade la cortadorade cespedarriba mencionado,MTDConsumerGroup Inc. mantendr_un suministrode piezas bajo garanfiasuficientepara satisfacerla demandaesperadade tales piezas.
9. Cualquierpieza de reemplazose podr&usarpara el cumplimientodel mantenimientoo reparacionesbajo garanfia, y sesuministrar_sin cargo para el propietario.Dichouso no reducir_ las obligacionesde garanfia de MTDConsumerGroup Inc.
10. No se podr&nusar piezasadicionalesni modificadasque no estenexentasde acuerdocon el Departamentode los Recursosdel Aire (Air ResourcesBoard).
El usode cualquierpiezaadicionalo modificadano exenta por el compradorfinal ser&causal de invalidezde los reclamosbajo garanfia. MTDConsumer
Group Inc. no tendr_ responsabilidadpot la garanfiade fallasde piezas garantizadasque fuerencausadas pot el uso de unapieza no exenta adicionalo modificada.
PIEZAS GARANTIZADAS:
La reparaci6no el reemplazode cualquierpieza garantizadaquede otro modo pudieseestar cubiertapor la garanfia podr_ser excluidade tal coberturade garanfiasi MTDConsumerGroup Inc.demuestraque la cortadorade cespedes objetode uso incorrecto,negligenciao mantenimientoinadecuado,y que tal uso incorrecto,negligenciao mantenimientoinadecuadofue causadirecta de la necesidadde reparaci6no reemplazode dicha pieza.No obstanteIoantedicho, cualquierajustede un componentecon un dispositivode limitaci6nde ajuste instaladoen f_brica y quefuncione adecuadamente,podr_ set cubiertopot la garanfia. La siguientelista de piezases cubierta pot la garanfia de emisiones:Linea de combustible,abrazaderasde la linea de combustible
GARANTiA LiMITADA DEL FABRICANTE PARA
La siguientegaranfialimitadaes otorgadapor MTD LLCcon respecto a nuevosproductosadquiridosy utilizadosen EstadosUnidos,sus territoriosy posesiones.
"MTD"garantizaeste productocontra defectosen los materialesy manode obra por un periodode dos (2) aSosa partirde la fecha aiguno,cualquierpiezaque presentedefectosen los materialeso manode obra. Esta garantialimitadas6iose aplicar_,si el producto ha sidooperadoy mantenidode acuerdocon las instruccionesdel
Manualdel Operadorque se proporcionaconel productoy no ha sido sujetoa uso inapropiado,abuso,uso comerciai,abandono,accidente, mantenimientoincorrecto,alteraci6n,vandalismo,robo,incendio, inundaci6no algOndaSodebido a otro peligroo desastrenatural.El
daSoresultantepor la instaiaci6no el uso de piezas,accesorioso aditamentosno aprobadospor MTDpara su uso conel(los) producto(s) incluido(s)en este manualanular_,la garanfiaen Ioque respectaa esosdaSos.
Se garantizaque las piezascon desgastenormalest_.niibresde
defectosen los materialesy manode obra por un periodode treinta
(30) dias a partirde ia fechade compra.Las piezaso componentes sujetosa desgastenormalincluyenpero no selimitana: baterias, correas,cuchillas,adaptadoresde cuchillas,bolsasde cesped, ruedasde plataforma,asientos,zapatasde deslizamientode m_.quina
quitanieve,placasde raspado,gomashelicoidalesy neum_.ticos.
COMO SOLiCITAR Y OBTENER SERVIClO TECNICO: El servicio de la garantia est& disponible, CON PRUEBA DE
COMPRA, a trav_s de su distribuidor local autorizado para el mantenimiento. Para Iocalizarel distribuidor de su Area,consulte las P_.ginasAmarillas o p6ngase en contacto con MTD LLC en
RO. Box 361131,Cleveland, Ohio 44136-0019,o comuniquese por tel_fono a los numeros 1-800-800-7310 o 1-330-220-4683 o visite nuestro sitio Web en www.mtdproducts.com.
Estagaranfialimitada no suministracoberturaen lossiguientescasos: a. El motoro las piezascomponentesdel mismo.Estoselementos
puedenestargarantizadospor el fabricantepor separado.Consulte
los t_rminosy condicionesen la garantiacorrespondientedel fabricante.
b. Las bombasrompetroncos,v_.ivulasy cilindrostienenuna garantia separadade un aSo.
c. Loselementosnecesariosdel mantenimientode rutinacomo por ejempiolubricantes,filtros,afiladoresde cuchillas,sincronizaci6ndel motor,los ajustesde losfrenos,del embragueo de la piataformay el deterioronormaldel acabadoexteriordebidoal uso o exposici6n.
d. Serviciorealizadopor otra personadistintaal distribuidorautorizado parael mantenimiento.
e. MTDno garantizalos productosvendidoso exportadosfuera de los EstadosUnidos,sus posesionesy territorios,exceptolos vendidosa travesde los canalesautorizadospor MTDpara la distribuci6nde exportaciones.
f. Piezasde reemplazoque no sonpiezasgenuinasfabricadaspor
MTD.
g. Gastosde transportey Ilamadaspor serviciost_cnicos.
No existeninguna garantiaimplicita,incluyendocualquier garantia implicitade comerciabilidado adaptabilidad para un
propbsitoen particular,una vez transcurrido el periodoaplicable de garantiaescrita segSnIo antedicho en relaci6n con las piezas
identificadas.Ninguna otra garantia expresa, fuere escrita o verbal, m_s all_ de las mencionadas anteriorrnente, extendida
pot cualquierpersonao personasjuridicas,incluidoslos distribuidores o los rninoristas con respecto a los productos, obligar_ a MTD.Durante el periodo de la garantia,el recurso exclusivo ser_ reparar o reemplazarel productosegSn Io anteriormente establecido.
Las disposiciones de esta garantia cubren el recurso de
reparaci6n_nica y exclusivaque surge de la venta. MTDno ser_ responsablede las p_rdidas o los daSos incidentaleso
resultantes,incluyendo,sin limitaci6n, los gastosincurridos en servicios de rnantenirniento del pasto,o los gastos de arrendamiento realizados para reemplazarde manera transitoria un productobajo garantia.
perjuiciosincidentaleso resultantes,o las limitacionessobrela duraci6n de lasgaranfiasirnplicitas,por Io que lasexclusioneso limitaciones mencionadasanteriormentepuedenno serlede aplicaci6n.
En ningOncaso se obtendr_,una compensaci6nde ningOntipo por un montomayoral preciode compradel productovendido.Laalteraci6n de las caracteristicasde seguridad del producto anular_ esta garantia. Ustedasumeel riesgoy la responsabilidadde lasp_rdidas, daSoso lesionesque sufran ustedy sus bienesy / u otras personasy sus bienescomo resultadodel uso incorrectoo de la falta de capacidad para usareste producto.
Estagaranfialirnitadaaicanzasoiamenteal compradororiginal,o a la personaque recibi6el productode regalo.
COMOSE RELACiONALA LEGiSLACiONDEL ESTADOCON
ESTAGARANTiA: Estagaranfialimitadale otorgaderechoslegales espedficosy ustedtambi_npuedetenet otros derechosque variande un estadoa otro.
iMPORTANTE: El propietariodebe presentarPruebade compra originalpara obtenerla coberturade la garanfia.
MTD LLC, P.O. BOX 361131 CLEVELAND, OHiO 44136=0019; Tel_fono: 1=800=800=7310, 1=330=220=4683
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project