American Standard Cadet 3 FloWise Tall Height Round Toilet Bowl Only in Linen Installation guide

CADET

®

3 RIGHT HEIGHT

®

ROUND FRONT TOILET 10" ROUGH-IN

VITREOUS CHINA

BARRIER FREE

CADET ® 3 RIGHT HEIGHT ®

ROUND FRONT TOILET 10" ROUGH-IN

❑ 270BB.101

• Features the Cadet ® Flushing System

• Vitreous china

• High Efficiency Toilet (HET), ultra-low consumption

(4.8 Lpf/1.28 gpf) utilizes 20% less water

• PowerWash ® rim scrubs bowl with each flush

• Includes color match bowl caps

• EverClean ® surface included

• 3" flush valve

• 2-1/8" trapway

• 16-1/2" rim height for accessible applications

• 10" (254mm) rough-in

• Generous 9" x 8" water surface area

• Chrome finish trip lever is supplied

• 1,000g MaP Score** at 1.28 gpf

• 5 year warranty

❑ 3717B.001 Right Height ® Round Front Bowl

❑ 4019.101N Tank

Nominal Dimensions:

717 x 439 x 770mm (28-1/4" x 17-1/4" x 30-1/4")

Fixture only, seat and supply sold separately

FINISHED WALL

30 ± 6mm

(1-1/8" ± 1/4")

190mm

(7-1/2")

667mm

(26-1/4")

439mm

(17-1/4")

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous

China Fixtures

• US EPA WaterSense ® Specification for HETs 92mm (3-5/8")

419mm

(16-1/2")

C/L OF SEAT POST HOLES

140mm (5-1/2" CENTERS)

419mm

(16-1/2")

SUPPLY

AS

REQ'D.

*203mm

(8")

356mm

(14")

770mm

(30-1/4")

** Maximum Performance (MaP) testing performed by

IAPMO R&T Lab. MaP Report conducted by Veritec

Consulting, Inc. and Koeller and Company.

216mm

(8-1/2")

254mm

(10")

328mm

(13")

C/L OF OUTLET

FINISHED

FLOOR

237mm

(9-3/8")

*152mm

(6")

To Be Specified:

❏ Color: ❏ White ❏ Bone ❏ Linen

❏ Seat: #5320.110 EverClean ® Round Front Seat with

Slow Close Snap-Off Hinges

❏ Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF

254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND

ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE

BUILDING FACILITIES-CHECK LOCAL CODES.

K221

Certified by

IAPMO R&T

© 2013 AS America Inc.

Rev. 8/13