advertisement
PRECAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
WARNING: TO REDUCE THE
RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE
THIS APPL IANCE TO RAIN OR
MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
!
The light ening flash with arrowhead symbol, within an equilateral triangle, i s intended to alert the user to the presence of uninsulated dangerous voltage within the produc ts enclosure that may be of sufficient magnitude to constitute a risk of electric shoc k to pers ons.
The exclamation point within an equilateral triangle is i ntended to alert user to the presence of important operating and maint enance (servicing) instructions in the literature accom panying the appliance.
CLASS 1 LASER PRODUCT
Laser product symbol: loc ated on the rear panel of the unit, indicate this player is a class laser product, only use weak l aser and no hazardous radiat ion outside of the uni t.
1.Read through this instruction manual before installation and use.
2.Do not touc h the power plug with wet hand.
3.Sw itch off the main power when the unit i s not in use. (Dis connect the power plug from the power outlet when you do not intend t o us e the unit for a prolonged period of time.)
Bef ore moving t he unit, remove the disc f rom the unit/ tray first.
4.Do not open the cover or touch any of the components exposed out of the unit, only for qualified techni cians.
5.Do not expose t he unit under direct sunlight or nearby obj ects that radiate heat to avoid damage the uni t.
6.Do not place the unit in moist and humid conditions, w hich effect t he pick-up of the unit lead to out of work.
7.Place the unit on a f lat s urface and ventilative conditi on. Please ensure the ventilation holes are not covered to avoid overheating and malfunction.
8.Clear the panel and case with soft dry cloth only, do not apply any kind of thinner, alcohol or spray s.
9.The apparatus shal l not be exposed to drippi ng or spl ashing and t hat no object s fill ed wit h liquids , such as vases, shall be placed on the apparatus .
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
6. Specification
General Specification
Power Supply Requirement..................................................DC 12V
Maximum Power Output...................4 x 80W(measured at DC 14.4 V)
Dimensions(w x h x d)........................................178 x 50.5 x 162mm
DVD Deck Specification
Format.....................................DVD/VCD/JPEG/MP4/MP3/WMA/CD
Video System....................NTSC/PAL/PAL-M/PAL-N/AUTO(optional)
Audio System..............................................................24 bit/96KHz
Loading System.................. ........................................ Auto Loading
Mounting Angle.................................................................0 to +/-30
Video Specification
Video Type...................................................................16:9 and 4:3
Video Output level......................................Composite:1.0
0.2Vp-p
Load impedance: 75 ohms
Horizontal Resolution................................................................500
Audio Specification
Audio Output(Analog audio)..........................................2.0
+0
-1.0
Vrms
Frequency Resp onse.............................20Hz ~ 20KHz(at 1KHz 0 dB)
S/N Ratio(Audio).............................................
90dB (at 1KHz 0 dB)
Separation..............................................................................50dB
Radio Specification
FM Section
Frequency range..............................................87.5MHz - 107.9MHz
Usable sensitivity......................................................................3uV
I.F Frequency....................................................................10.7MHz
AM Section
Frequency..........................................................530KHz - 1710KHz
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Contents
1. Before Operation...........................................................................................3
1.1 Glossary................................................................................................ 3
1.2 Precautions............................................................................................3
1.3 Maintenance and Cleaning of Discs..........................................................4
1.4 Battery Information of the Remote Control.................................................4
1.5 The Remote Control Description...............................................................5
1.6 The Locations and Names of Controls on or in the unit................................6
1.7 Wires Connection Description..................................................................7
1.8 Unit Installation.......................................................................................8
2. Common Operation........................................................................................9
3. Radio Operation...........................................................................................10
4. Disc, USB and Card Operation......................................................................11
4.1 Load/unload Disc, USB or Card...............................................................11
4.2 Pause Playback.....................................................................................13
4.3 Stop Playback .......................................................................................13
4.4 Select Chapter/Track with the >>|/|<< Buttons..........................................13
4.5 Select Chapter/Track with the Number Buttons.........................................13
4.6 Select Chapter/Track with the Root/PBC Menu.........................................13
4.7 Playback with Speed..............................................................................14
4.8 Playback with Slow Speed......................................................................14
4.9 Display Still Frame Step by Step.............................................................15
4.10 Playback Repeatedly...........................................................................15
4.10.1 One/All Repeat................................................................................ .15
4.10.2 A-B Repeat.......................................................................................15
4.11 Playback in Scan Mode.........................................................................16
4.12 Playback from a specified Chapter/Track or a Specified Time..... ..............16
4.13 Playback in Random.............................................................................16
4.14 Playback in Different View-Angle...........................................................16
4.15 Playback in Zoom Mode........................................................................16
4.16 Change the Caption Language..............................................................17
4.17 Change the Audio Language.................................................................17
4.18 Change the Video Signal System..........................................................17
4.19 Look over the Playback Status..............................................................17
4.20 Program Playback...............................................................................18
4.21 Playback IMAGE files..........................................................................18
4.22 Playback MP4 files..............................................................................1 9
4.23 ESP and ID3 Function..........................................................................19
4.24 The DVD System Menu Setup Operation................................................19
* The Region Code.................................................................................23
6. Specification...............................................................................................25
1. Before Operation
1.1 Glossary
PBC (playback control)
It is a kind of signal(menu) recorded in the disc with SVCD or VCD2.0
format used for the playback control. For the discs contained PBC, It can playback interactive software with the menu displayed on monitor screen.
If the disc contain still images, it can playback high definition of still image.
Title
Generally, the title is the important part of DVD disc. for example, the theme part of movie is title 1, the part described how to make movie is title
2, the cast is title 3, etc. Every title contain a serial number that is easy to look up.
Chapter
A title can be divided into several blocks, so that every block can be operated as a unit, the unit is called chapter. The chapter contain a unit at least.
Track
It is the biggest component of VCD. Generally, every song of karaoke disc is a track.
1.2 Precautions
Safety
1. Power Source: The unit should be connected to power supply only of the type described in the operating instructions or as marked on the unit.
2. The unit is designed for negative terminal of the battery which is connected to the vehicle metal. Please confirm it before installation.
3. Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or burn out the power amplifier.
4. Do not install the detachable panel before connecting the wire.
Environment
1. Do not use this unit when water and moisture is near it.
2. If moisture forms inside the Lens, it may not operate properly. To correct this problem, wait about one hour for the moisture to evaporate.
3. If the car interior is extremely hot, do not use the player until the car has been driven for a while to cool off the interior.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
5. The Trouble Shooting
Plea se read the user
’ s manu al care fully before using t he DVD player. If y ou have any troubl es in u sing th is player, try to solve the problems by the su ggestions mention ed bel ow. If you can not remove the trouble after using all the s ugges tions, please contact the company or the tech nical service cente r authorized by us . For the sake of your safe ty, please do not o pen the cover and repair the player b y yourself, if that, it may c ause e lectric shock.
NO PICTURE, SOUND AND INDICATION
* Ensure that the power switch is o n.
* Ensure that the wall inlet is ok.
* Ensure that the power cord is not dama ged or the fu se is not blown.
* Ensure that the power plug is connected to the inlet tightly.
NO SOUND BUT HAVE PICT URE
* Ensure that the player
’ s audio output has a good co nnection with monitor
’ s audio input.
* Check whethe r the a udio connec tor is d amag ed.
* Check whethe r you have turned down the volume.
* Ensure that you hav e set the righ t AUDIO setup of th e play er.
* Ensure that the audio is no t unde r mute.
NO PICTURE BUT HAVE SO UND
* Ensure that the player
’ s vi deo ou tput h as a go od connection with monitor
’ s video in put.
* Ensure that you hav e turned you r monitor to the AV input channe l connecting to your player.
* Check whethe r the v ideo connector is damaged.
* Ensure that you hav e set the righ t VIDEO settings o f the player.
BLACK AND WHITE PICTURE OR SCREEN RO LLING
* Ensure that you hav e set the righ t TV SYSTEM (e.g. PAL, NTSC) settin g.
FLAWS OF PICT URE OR SOUND
* Check whethe r the s etting of AUDIO is right.
* Check whethe r the d isc is scratched or staine d.
* Check whethe r the AV con nector and the output term inal is stain ed.
* Check whethe r there is condensation in side the Len s. If so, leave the p layer off for an hour or so, then try again.
* Check whethe r the installa tion angle is less th an 30 .
DISPLAY NO DISC OR BAD DISC
* Ensure that you hav e put t he disc on the tray.
* Check whethe r the d isc is put in the rev erse side.
* Check whethe r the d isc is distorted.
* Check whethe r the d isc is staine d or scratche d badly.
* Ensure that the disc forma t is compatib le to th e player.
* Ensure that the temperatu re inside the car is not too high. If so, cool off till the ambient tempera ture returns to nor mal.
* Replace another disc to in sert it into the disc compa rtment.
REM OTE CONT ROL IS INSENSITIVE OR DOES NOT WOR K
* Check t he bat teries of remote control and make sure that they are to be powe rful and g ood co nductivity.
* Direct the remote control to the IR sens or of t he player.
* Check whethe r there are some o bstacles between the rem ote co ntrol a nd IR sensor.
SOM E FUNCTION BUTTONS DO NOT WORK
* Turn off the po wer, then tu rn on again.
* Reset the unit to zer o, then turn on again.
* Remove the front panel fro m the unit, th en install it again and then turn on again.
THE RADIO DOES NOT WORK
* Check whethe r the a ntenna cable is connected firmly. Or m anua lly tune for a station.
* The Region Code
Q: Not begin to playback but to display REGION ERROR after inserting disc i nto disc c ompartm ent. Wh y ?
A: Because the DVD player and disc has respe ctive region c ode. If the re gion cod es of them are not match with each other, the DVD player can not play the disc.
Appendix: The reg ion c ode of DVD:
The M otion Picture Association of America (MPAA) divided the world into 6 region s, a nd n amed every regio n a code , namely region code. The region codes and the countries o r areas represented by the region codes as follows :
R egion 1: America, Canada , East-Pacific Inland s;
Region 2: Japan, West Europe, North Europe, Egypt, Sou th Africa, Mi ddle East;
Region 3: Sou th-east Asian countries include Taiwan, Ho ng Kong, South Korea,
Thailand, indone sia, etc.;
Region 4: Australia , New Zeala nd, Central South America, South Pacific Inlands;
Region 5: Rus sia, Mongolia, Indian Peninsula, Middle Asia, East Europe, North
Korea, North Africa, North-west Asia etc.;
Region 6: Chin a m ainland.
Basic ally, when a DVD movie disc fo r the version of region 6 was decided not to issue, we need to p urchase another DVD pla yer that can play the DVD movie disc for the version of non-region 6. In order to view this disc, viewer who does not have the non-region 6 DVD player facilities will ha ve to sp end extra sum of money to buy it. The problems caused fro m the area code inconsistenc y between th e disc and the
DVD p laye r has pushed for the production o f Unlock-Version DVD player facilities, and some DVD disc se ts allow user to modify the area codes for a limited numb er of times. But note that only the discs produced by the 8 biggest filmm aking companies of Am erica restrict so, they are not one of origina l DVD format. That is to s ay, the
DVD m ovie dis cs not p roduced by the 8 biggest filmmaking compa nies of America were not restricted by the rule of region code. Generally, they are called
FreeRegio nCo de d iscs or Full Regi on discs. The 8 biggest filmmaking compan ies of Am erica are as follows:
1. WarnerBros;
2. Columbia;
3. 20thCenturyFOX;
4. Paramount;
5. Universal;
6. UA(UnitedArtist);
7. MGM(M etroDogwynMayer);
8. WaltDisney
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
1.3 Maintenance and Cleaning of Discs
Disc Maintenance
1. To surface of the play side.
2. Do not stick paper or tape on the disc. If there is glue (or analog) on the disc surface, must wipe it up before using.
3. Do not expose the disc to direct sunlight, or nearby heat sources such as caliduct, or leave it in a car parked in direct sunlight where there can be a considerable rise in temperature.
4. Put the disc inside disc case to keep temperature after finishing playback.
Disc Cleaning
1.
2.
Before playing, wipe the disc with a clean lint. wipe the disc outwards from the disc center.
Do not use petrel, thinner. commercially cleaner or anti-static spray can damage the unit.
Fig.2
A
B
Fig.1
Fig.3
1.4 Battery Information of the Remote Control
Replace Battery in the Remote Control :
1.Before using the remote control for the first time, pull the insulating sheet out of the remote control as the direction indicated by the arrow.(see fig.1)
2.Press the movable block hold as the direction indicated by the A arrow
(See fig.2), then pull the battery holder out of the remote control as the direction indicated by the B arrow(see fig.2).
3.Replace the old battery by a new battery with (+) polarity side upward.
(See fig.3).
4.Insert the battery holder to the original position in remote control.
(See fig.3).
Note about the Battery of the Remote Control :
1.
Improper use of battery may cause overheating or explosion. so that
Result in injury or fire .
2.Battery leakage may cause damage to the remote control(Battery
Life: 6 months with normal use in normal room temperature).
3.Do not short the battery.
4.Do not throw the battery into the fire.
5.To avoid the risk of accident, keep the battery out of reach of children.
+ side up
1.5 The Remote Control Description
3 27
3 5
1
14
29
3 2
9
3 4
13
31
30
2 4
28
21
2 2
26
25
23
PWR
MU
EQ
MODE
SEL
+
SETUP
PROG OSD
P/N
BAND
0K
MENU
1
-10
5
CLK
SLOW_FWD
LOC
9
ST
2
+10
6
3
7
0/10
4
8
10+
SEARCH APS
ZOOM
INT
AUDIO
RPT
TITLE/PBC
RDM
SUBTITLE
A-B
LOUD STEP
16. SEARCH BUTTON
17. RDM BUTTON
18. RPT BUTTON
19. SUBTITLE BUTTON
20. TITLE/PBC BUTTON
21. ANGLE/ST BUTTON
22. ZOOM BUTTON
23. AUDIO BUTTON
24. CLK BUTTON
25. A-B BUTTON
26. INT BUTTON
27. EQ BUTTON
6
8
5
7
10
11
12
4
2
33
1 6
1 5
1 8
17
19
20
1. TILT BUTTON
2. MENU BUTTON
3. POWER BUTTON
4. ^ BUTTON
5. >>| BUTTON
6. > BUTTON
7. |<< BUTTON
8. v BUTTON
9. SEL BUTTON
10. PLAY/PAUSE BUTTON
11. NUMBER(0~10,+10
-10) BUTTONS
12. 10+ BUTTON
13. SETUP BUTTON
14. MODE BUTTON
15. APS BUTTON
28. LOC/SLOW-FWD BUTTON
29. MUTE BUTTON
30. STOP BUTTON
31. VOLUME- BUTTON
32. < BUTTON
33. OK BUTTON
34. VOLUME+ BUTTON
35. BAND AND P/N BUTTON
36. PROG BUTTON
37. OSD BUTTON
38. LOUD BUTTON
39. STEP BUTTON
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
HUE
It is for adjusting the hue of the video output.
SATURATION
It is for adjusting the saturation of the video output.
SHARPNESS
It is for adjusting the sharpness of the video output.
4.24.5 SPEAKER SETUP
DOWNMIX
It is for selecting your desired sound effect when there is not central speaker and sub-woofer. There are 3 mode: LT/RT, STEREO, VSS.
LT/RT: When playing a disc with PRO LOGIC Dolby stereo effect, choose the item, so it will output audio signal with vivid theatre effect.
STEREO: If you choose the item, when outputting audio signal with 5.1 channels, it will output the left and right channels of signal ; when outputting audio signal with 2 channels, it will output the common 2 channels of stereo signal.
VSS: If you choose the item, when playing a disc recorded with 5.1 channels, the main channel speakers can output audio signal with VSS effect.
4.24.6 DIGITAL SETUP
OP MODE
It is for selecting audio output mode
LINE OUT: It can linearly compress the audio signal. So the volume level is lower.
You should select the item at night.
RF REMOD: It can make the volume level higher. You should select it at daylight.
DYNAMIC RANGE
After selecting the compression mode of LINE OUT, set the item, so you can adjust the linear compression ratio. If you set it to be FULL, the Peak-to-Peak value of the audio signal is the minimum; if you set it to be OFF, the Peak-to-
Peak value is the maximum.
DUAL MONO
It is for selecting a desired audio output mode for the left and right ways of signal.
It is mainly for Karaoke of Ac3. There are 4 modes in all as follows:
STEREO, MONO L, MONO R, MIX MONO.
4.24.2 LANGUAGE SETUP
1.6 The Locations and Names of Controls on or in the unit
OSD LANGUAGE
This item is for selecting the language of the SYSTEM MENU and all operating prompt interface displayed during playback.
AUDIO LANG
This item is for selecting a audio language.
SUBTITLE LANG
This item is for selecting a subtitle language.
MENU LANG
This item is for selecting a disc menu language.
4.24.3 AUDIO SETUP
7" TFT
R E SET
/MU MODE ANG
_
+
EJECT
7 1
3 2 4
5
The Diagram of the Face of the Front Panel
8 6
SD/MMC
9
10
AUDIO OUT
there is only ANALOG mode, i.e. SPDIF/OFF, not optional.
KEY
It is for selecting your desired basic music tone(from low to high).
4.24.4 VIDEO SETUP
BRIGHTNESS
It is for adjusting the brightness of the video output.
CONTRAST
It is for adjusting the contrast of the video output.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
The Diagram of the Face of the Unit After Sliding down the Front Pan el
1. PO WER/MUTE button
2. MODE button
3. PLAY/ PAUSE button
4. ANG button
5. + and - but tons
6. IR remote sensor
7. RESET button
8. EJECT butt on
9. Disc slot
10. SD/MMC Card slot
1.7 Wires Connection Description
The Description of the Input/Output Interface of the Rear Cabinet
For t he DVD System Menu, there are 6 setup pages in all. They display as follows:
4.24.1 SYSTEM SETUP
Fixed ISO Female Connector
Clip of the other wires
The Description of the Other Wires Through the Clip
Clip
Radio Ant
AUX IN-R AUX IN-L AUX IN-V CAMERA
VIDEO OUT1
VIDEO OUT2
PARKING REVERSE
RCA-R
RCA-L SUBWOOFER
USB SOCKET
The Description of the Fixed ISO Female Connector
CONNECTOR A
1.
2.
3.
4. Memory +12V
5. Auto Antenna Output
6.
7. 12V (To Ignition Key)
8. GROUND
CONNECTOR B
1. Rear Right Speaker (+)
2. Rear Right Speaker (-)
3. Front Right Speaker (+)
4. Front Right Speaker (-)
5. Front Left Speaker (+)
6. Front Left Speaker (-)
7. Rear Left Speaker (+)
8. Rear Left Speaker (-)
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
TV SYSTEM
This product supports output of various TV system.
If your TV set has only NTSC or PAL system, the screen will blink and become colorless when a wrong TV system is selected. In this case, press the N/P button to switch the right TV system to match the TV color system.
TV TYPE
The setup item is for mat ching TV screen size.
4:3 PS: Choose the item when connecting a TV set with 4:3 screen. When playing the pictures with 16:9 size, the left and right parts of the video will be cut out, and display in full screen.
4:3 LB: Choose the item when connecting a TV set with 4:3 screen. When playing the pictures with 16:9 size, the top and bottom parts of the TV screen will be turned into a black square respectively.
16:9: Choose the item when connecting a TV set with 16:9 wide screen.
PASSWORD
This setup item is for locking or unlocking the rating level of the Parental Control.
The defaulted state is locked. The defaulted password is 0000.
You can set a new password t hat you like: Select the PASSWORD item and then press the > button to enter it, then input the original password 0000, and then press the OK button to unlock it. Press t he > button to enter it again, then input a new password that you like and t hen press the O K button to make it effective.
Before the other persons see the Manual, you should get the passwor d in mind and cut out the part of PASSWORD in the Manual.
RATING
The item is for setting a new rating level of the Parental Control.
1. Select the PASSWORD item and then press the > button to enter it, then input the password mentioned above, and then press the OK button to unlock the setting of the rating level of the Parental Control.
2. Select the RATING item and then press the > button to enter it, then use the direction buttons to select your desired rat ing level, then press the OK button to confirm.
3. Select the PASSWORD item again and then press the > button to enter it, then input the password, and then press the OK butt on to lock the new setting of the rating level of the Parental Control.
DEFAULT
This item is for making all setup items change back to original status.
3. During IMAGE playback, press one of the >/</^/v buttons to change the angle of viewing picture that is displaying as follows:
>: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT
During IMAGE playback, press the PROG button to change the mode of refresh picture.
During IMAGE playback, press the STOP button to stop playing and return to the root menu.
* During IMAGE playback, the following buttons are not available: SLOW-FWD,
SUBTITLE, TITLE, ANGLE, AUDIO, RDM, INT and A-B.
* In IMAGE mode, the other operations are same as ones in MP3/WMA mode.
4.22 Playback MP4 files
1. The root menu is displayed on TV when beginning to switch on Mp4 mode, then it will automatically play the first file.
During playback, press the STOP button to stop playing and return to the root menu.
2. When displaying the root menu, press the direction buttons to select your desired
FOLDER ,file or file sort icon, then press the OK or PLAY button to open the FOLDER, open the files of the file sort icon or play the selected file.
When displaying the root menu, you can also use the number buttons to select the serial number of the file and play the file.
* The ANGLE, PROG, RDM, INT and TITLE/PBC button are not valid.
* The other functions are same as ones in DVD mode; but the RPT function is same as one in MP3/WMA mode.
4.23 ESP and ID3 Function
There is ESP function for all formats of discs.
In MP3/WMA mode, during playback, the information of the file name, folder name, song s title, artist and album will be scrolling on the LCD display. As long as the current playing MP3 music contains relevant ID3 tag information in version 1.0/2.0
format, the 3 items underlined above will be scrolling on the LCD display; otherwise, they will not.
4.24 The DVD System Menu Setup Operation
1. Press the SETUP button on the remote control to access the DVD System Menu on the monitor.
2. There are 6 setup pages in all for the System Menu. Press the > or < button to select an desired setup page.
3. Press the ^ or v button to select an setup item in the selected setup page.
4. Press the > button to enter the setup item. Then press the v or ^ button to select a desired mode of the setup item, finally press the OK button to confirm it.
* Press the < button to return to the upper level.
* Press the SETUP button again or use the direction buttons to highlight the item of the
EXIT SETUP and then press the OK button to exit the System Menu.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
Description of Connecting the Parking Brake Line to the Parking Brake System Built in the Car
Parking brake
Parking brake line(green)
Parking brake switch
(inside the car)
To metallic body or chassis of the car
NOTE: after connecting the Parking Line, the video on the small monitor of the front panel will be display only after br aking the car.
1.8 UNIT INSTALLATION
INS TAL LAT ION INSTRU CTIO NS
1)RE MOVE THE 2 DEC K TRA NSPO RT SC REW S BEF ORE I NSTALLATIO N.
2)PL EASE DO TH E CO NNEC TION OF TH E POW ER, SPEAK ERS AND A NTEN N A
AC COR D ING T O TH E REQ UIREM ENT OF TH E INSTRUC TION BOOK .
3)IF THE L EFT AND RI GHT IN STAL LATIO N BR ACKETS SU PPLIED BY F ACTO RY
AR E FIT FOR Y OUR CAR, PLEASE FIX THEM ON T HE CH ASSIS AND THEN
FI X THE UNIT IN THE CAR WITH SCRE WS ACCOR DING TO TH E FOL LOWI NG
DI AGRA M; OT HERW ISE, PLEAS E USE THE LEFT A ND R IGHT INSTA LLATI ON
BR ACKETS SU PPLIED BY YOUR CAR SUPP LIER.
DASH BOA RD
TRAN SPORT SCREWS
RIGH T INSTALLATION B RACK ET
COM PLETED UN IT
PLASTIC F RAME
LEFT IN STALLATIO N BRA CKET
2. Common Operation
1. To turn on/off the unit
In power off mode, short press the P OWER button to turn on the unit.
In power on mode, long press the POWER button on the front panel or short press the POWER button on the remote control to turn off the unit.
2. To select an optimal angle of the monitor of the Car Audio System
To select an optimal angle of the monitor of the Car Audio System, press the ANG button on the front panel or TILT button on the remote control repeatedly.
3. To select function mode
Press the MODE button to select RADIO, DISC
(After inserting a disc), USB(After inserting a USB storage), CARD(After inserting a card) or AUX mode.
During playback, tapping the icon after popping up Keyboard interface can pop up Mode Menu as right. then tap one icon in it to select your desired mode.
Mode Menu
press or hold the + or - button to directly adjust the volume level.
5. To mute sound
Press the MUTE button on the remote control to turn on/off MUTE mode.
pressing the POWER button on the front panel shortly also can turn on/off MUTE mode.
6.
To display and adjust the clock time
Press the CLK button to display clock time on the screen of the monitor.
Long press the CLK button to change the color of the hour of the clock, then press the + or - button to adjust the hour; and then briefly press the CLK or SEL button to change the color of the minute of the clock, then press the + or - button to adjust the minute.
7. To select a desired EQ mode
Press the EQ button on the remote control to select one of the preset music equalizer curves: P OP, ROCK, CLAS, FLAT. The sound effect will be changed.
8 . To turn on/off LOUD mode
Press the LOUD button to turn on/off LOUD mode.
When turning on LOUD mode, it will enhance bass level immediately when bass is not enough.
9. To reset the player
When the monitor display wrongly or some buttons are not available or sound is distorted, press the RESET button to rehabilitate the distorted program to zero.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
4.20 Program Playback
It allows you to enter the order in which you want some chapters/tracks in
DVD/VCD/MP3/WMA/CD to play.
1 During playback, press the PROG button to enter a program interface as follows: for DVD for VCD/MP3/WMA/CD
2 Use the direction buttons to move cursor onto the desired place for inputting the sequence number.
3 Use the number button to input desired sequence number of title/chapter/ track with desired sequence.
4 Use the direction button to move cursor onto Play item, then press the OK button to play the programmed titles/chapters/tracks in programmed order; only pressing the PLAY button also can play the programmed titles/chapters
/tracks in programmed order.
* To exit program playback, firstly press the STOP button, then press the PLAY button to enter sequence playback; or press the PROG button twice again.
* To remove the all programmed sequence numbers, move the cursor onto
Clear item, then press the OK button.
* To change the programmed sequence, move the cursor onto the item you want to change, input the desired sequence number.
* During VCD playback, if it is in PBC ON mode, at the same time of entering the state of program playback, it turns off PBC mode.
4.21 Playback IMAGE files
1. The root menu is displayed on the monitor when beginning to switch on IMAGE mode. .
In the root menu, the left file sort icon is for MP3/WMA file; the middle file sort icon is for IMAGE file; the right file sort icon is for VIDEO file. If one of these 3 file sort does not exist, you can not move cursor onto the file sort icon.
2. When displaying the root menu, press the direction buttons to select your desired FOLDER, file or file sort icon, then press the OK or PLAY button to open the FOLDER, or play the selected file, or play only this sort of file.
When displaying the root menu, you can also use the number buttons to select the serial number of the file and play the file.
When you select the IMAGE file sort icon, press the ^ or > button to select the first IMAGE file, then press the v button to select the desired IMAGE file, finally press the OK or PLAY/PAUSE button to display the image in full screen from the selected IMAGE file.
ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF.
Press one of the ^/v/>/< buttons to select the area you want to enlarge.
4.16 Change the Caption Language
In the state of DVD playing, press the SUBTITLE button repeatedly to select the language of the caption or turn off the caption.(depend on the media used.)
In the state of VCD/MP3/WMA/CD playing, the button is not available.
4.17 Change the Audio Language
1. In the state of DVD playing, press the AUDIO button repeatedly on the IR remote control to select the desired language type.
(depend on the media used)
2. In the state of VCD playing, press the AUDIO button repeatedly to select the sound mode of the MONO L, MONO R, MIX MONO and Stereo, no language function.
3. In the state of CD/WMA/MP3 playing, the AUDIO button is invalid.
4.18 Change the Video Signal System
During playback of DVD/VCD , press the BAND(P/N) button repeatedly to change the VIDEO SIGNAL SYSTEM mode .
4.19 Look over the Playback Status
1. In the state of DVD playing, press the OSD button repeatedly on the remote control to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing title, the serial number of the playing chapter, the elapsed time of the playing chapter, the remained time of the playing chapter, the elapsed time of the playing title, the remained time of the playing title, etc.
2. In the state of VCD/CD playing, press the OSD button repeatedly on the remote control to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing track, the elapsed time of the playing track, the remained time of the playing track, the elapsted time of the disc, the remained time of the disc.
3. In the state of MP3/WMA playing, press the OSD button repeatedly on the remote control to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing track, the elapsed time of the playing track, the remained time of the playing track.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
11.To do general setup
To do general setup, first pop up Mode Menu as in item 2, then t ap the icon in the Mode M enu to pop up GENERAL
SETUP interface as right.
In the interface, select one of CLOC K SET, RDS MODE ,
OSD LANG, RADIO FREQ and SENSE SET on the left side by tapping them, then set them by tapping some icons on the right side accordingly.
* SENSE SET is used to set the sensitivity of stopping auto searching for an available radio station. When you tap it, it will ask you to input a password. The password is 191713, after inputting it, you can set the item.
GENERAL SETUP
12.To do calibration
To pop up Calibration interface during media playback, first press t he STOP button twice, then press the ZOOM button, finally press the ^ and v buttons in turn.
In the interface, you can have calibration by accurately tapping the cross cursor.
3. Radio Operation
1. Enter RADIO mode
When you use M ODE button or Mode Menu to enter RADIO mode, it will display RADIO interface as right.
In RADIO interface, tapping the icon can enter Mode
Menu; tapping the icon can turn on or off TFT display; tapping the icon can pop up AUDIO & VIDEO SETUP interface as right; the other icons are same as the corresponding buttons in t he unit panel or in the Remote
Control.
In the AUDIO & VIDEO SETUP interface, you can adjust
VOLUM E, TREBLE, BASS, BALANCE, FADER, BRI GHT-
NESS, CONTRAST, COLOR, HUE; you can also t urn on or off DBAS, MBP, LOUD; you can still select your desired transparency mode(by STD) and EQ mode(by EQ); tapping
RADIO interface
the icon can return back to the previous status.
2. BAND BUTTON
AUDIO & VIDEO SETUP interface
In RADIO mode, press the BAND button on the remote control to select your desired radio band of FM1, FM2, FM3, AM1 and AM2, and the word means which band is selected will be displayed on the small monitor of the front panel.
3. TUNE/SEEK UP/DOWN BUTTONS
In RADIO mode:
1) Long press the >>|/ |<< button to automatically search up/down for a available station from the current frequency.
2) Briefly press the >>| / |<< button to manually search up or down w ith step by step for your desired station from the current frequency.
4. APS BUTTON
In RADIO mode:
1) When long pressing the APS button, the radio searches from the lowest frequency and checks the signal strength level until 1 cycle search is finished. And then the 6 strongest stations are preset to the corresponding preset number memory bank. The AS operation is implemented in the each bank of the selected band. When the AS operation is finished, it will scan each preset station for 5 seconds in FM or AM band from M1 as brief ly pressing APS button. Af ter
finishing a circle of scanning , it will resume broadcasting on the M1.(It can store 3x6 stations for FM and 2x6 stations for AM in all)
2) When briefly pressing the APS button, the radio will scan each preset station for 5 seconds in FM or AM band from M1. After finishing a circle of scanning, it will resume broadcasting on the M1.
NOTE: In FM band, FM1,FM2,FM3 is checked one at a time.
In AM band, AM1, AM2 is checked one at a time.
5. PRESET STATION [ 1-6 ] BUTTONS
In RADIO mode:
1) To memorize the current frequency on the current band, long press any one of the six preset buttons (1-6) .
2) To recall the preset memory on the current band, press one of the preset buttons [1-6] .
6. STEREO/MONO BUTTON
Press the ST button on the remote controller to select the STEREO or MONO sound mode for FM band.
7. LOC BUTTON
1) In RADIO mode, when the signal of the distance radio station are very weak and the receiving effect is bad during tuning, check whether there is the word LOC on LCD. If there is the word LOC on LCD, press this button to turn off the LOC function, then tune again for the distance radio station;
2) In RADIO mode, when the signal of the local radio station are too strong to lead that the interference to the receiving effect during tuning, press this button to turn on the LOC function to display the word LOC on LCD, then tune again for the local radio station.
4. Disc, USB and CARD Operation
4.1 Load/unload disc, USB or CARD
To play files in a disc or card, press the EJECT button to slide down the monitor .
Then insert the disc or card into the disc slot or SD/MMC Card slot.
To unload the disc or card, press the STOP button twice to stop playback, then press the EJECT button to slide down the monitor and eject disc in the disc slot and then remove the disc; or push the card firstly and pull it out of the card slot.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
4.11 Playback in Scan Mode
1. In the state of VCD(PBC OFF)/CD playing, press the INT button to play the previous 15 seconds part of each track on the disc. Press the INT button again to resume normal playback.
2. In the state of DVD/MP3/WMA playing, the INT button is not available.
4.12 Playback from a specified chapter/track or a specified time
1. In the state of DVD playing, press the SEARCH button to display a interface and highlight the title item, then use the number buttons to input the serial number of the title; use the direction buttons to highlight the chapter item, then use the number buttons to input the serial number of the chapter; you can still use the direction buttons to highlight the time item, then use the number buttons to input the desired time to start playback; finally press the
OK or PLAY button to play the selected chapter or play from the selected time.
2. In the state of VCD/MP3/WMA/CD playing, press the SEARCH button to display a interface and highlight the track item, then use the number buttons to input the serial number of the track; you can still use the direction buttons to highlight the time item, then use the number buttons to input the desired time to start playback; finally press the OK or PLAY button to play the selected track or play from the selected t ime.
4.13 Playback in Random
In the state of DVD/VCD(PBC OFF)/MP3/WMA/CD playing, press the
RDM button to switch between RANDOM (ON)/RANDOM OFF. When in
RANDOM (ON) mode, it will play in random.
4.14 Playback in Different View-Angle
1. In the state of VCD/MP3/WMA/CD playing, the VIEW-ANGLE button on the IR remote control is not available.
2. In the state of DVD playing, press the VIEW-ANGLE button repeatedly on the IR remote control to view in different angle.(This function is only for the DVD media with ANGLE function)
4.15 Playback in Zoom Mode
In video/image mode, during playback, press the ZOOM button continuously to enlarge a certain area of the images on the screen with these multiples:
During slow forward, press the PLAY button to resume normal playback.
The function is only for video.
4.9 Display still frame step by step
If the unit is currently playing video, press the TEL button consecutively to display still frame step by step.
Press the PLAY button to resume normal playback.
4.10 Playback Repeatedly
4.10.1 ONE/ALL Repeat
1.
In the mode of DVD playback:
Press the RPT button to select REP CHAPTER, REP TITLE, REP ALL or REP OFF.
2.
In the mode of VCD(PBC OFF)/CD playback: press the RPT button to select REP ONE, REP ALL or OFF.
When it is in the state of PBC ON, during VCD disc playing, the RPT button are not available.
3.
In the mode of MP3/WMA playback:
Press the RPT button to select REP ONE, REP DIR, REP ALL or OFF.
4.10.2
A-B Repeat
Press the
A-B
button if you want to repeat a specific segment on a disc that you define:
1.
Press the
A-B
button at a point (A) where you want it to be the start point of the repeat segment. Press the
A-B
button again at a point (B) where you want it to be the terminal point of the repeat segment. Then it will play the segment repeatedly.
2.
To cancel the A-B repeat mode and resume normal playback, press the button for the third time.
A-B
Note:
During VCD/MP3/WMA/CD playback, points A and B must be within the same track.
During DVD playback, points A and B can be selected from different chapters.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
To play files in an USB, insert the USB into the USB jack connecting to the Rear cabinet.
To unload the USB, press the STOP button twice and then remove the USB .
Remark
: If the disc or USB includes folder(for
MP3/WMA/MP4/JPEG files), after loading, it will display a root as right. On the bottom side of the root, the icon is for audio files; the icon is for image files; the icon is for Video files. If files of these 3 file sort does not exist, you can not move cursor onto the file sort icon.
Root interface for MP3/WMA/MP4/JPEG
Remark
: During playback, tapping the icon in the root (for MP3/WMA/MP4/JPEG) or any place on the screen (for CD/VCD/DVD/MP4/JPEG) can pop up the keyboard interface as right.
Keyboard interface-1
: Tapping it can pop up Mode Menu.
: Same as the corresponding buttons on the Remote Control.(for MP3/WMA/MP4/JPEG)
: Same as the corresponding button on the
Remote Control.(for MP3/WMA/MP4/JPEG)
: Same as the corresponding button on the
Remote Control or on the front panel.
: Same as the TITLE button on the Remote
Control (available only for DVD).
: Tapping it can stop playback and pop up the root.(exist only for MP4/JPEG)
: Tapping one of them can select next or previous chapter/track.
: Tapping one of them can switch on between the speed levels of fast backward or forward.
: Tapping it can pop up the AUDIO interface of the SET Menu as right. In the interface, you can adjust the levels of VOLUME, BASS, TREBLE,
BALANCE and FADER; can turn on or off LOUD,
DBAS and MBP; can select your desired EQ mode.
Tapping icon can pop up the TFT VIDEO interface of the SET Menu as right. In the interface, you can adjust the levels of BRIGHTNESS, CON-
TRAST, COLOR and HUE; you can also adjust
Transparency by tapping USER, STDY , BRIG,
SOFT and SHAR.
Tapping EXIT icon can exit the SET Menu.
* SET icon = SEL button.
Keyboard interface-2
SET Menu-1
SET Menu-2
4.2 Pause Playback
In the state of DVD/VCD/CD/MP3/WMA playing, press the PAUSE button on IR remote control to pause the playback, press the PLAY button to resume normal playback.
4 .3 Stop Playback
In the state of DVD/VCD/MP3/WMA/CD playing, press the STOP button once to pause the playback, then press the PLAY button to resume the normal playback; press the STOP button twice to full stop the playback, then press the PLAY button to start playback from the beginning of the first chapter/track.
4 .4 Select Chapter/Track with the >>| / |<< Button
Press the >>| / |<< button during playback to select the next or last chapter/ track to playback.
Note: Press the >>|/|<< button multiple times to advance multiple chapters/ tracks forward or backward.
4 .5 Select Chapter/Track with the Number Buttons
In the state of DVD/VCD(PBC OFF)/MP3/WMA/CD playing, press one of the 1~9 and the 0/10 number buttons to directly select and play the 1st to
10th track/chapter (the 0/10 button is used as the 10 button).
If you want to play the track/chapter that s serial number is bigger than 10, use the 10+, 1~9 and 0/10 button. For example 1, to play the 13th track/ chapter, firstly press the 10+ button once, then press the 3 button. For example 2, to play the 34th track/chapter, firstly press the 10+ button for 3 times, then press the 4 button.(the 0/10 button is used as the 0 button)
Note: long pressing the +10 or -10 button can play the next 10 or last 10 chapter/track(only for MP3/WMA/CD).
4 .6 Select Chapter/Track with the Root/PBC Menu (If the disc includes the root/PBC menu)
In the state of DVD playing
1.
Press the TITLE button on the remote control to display the title list.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
2.
Press the direction buttons to select your desired title, and then press the OK or PLAY button to open the root menu of the selected title.
3.
Press the direction buttons to select your desired chapter, finally press the
OK or PLAY button to play the selected chapter.
During playback, pressing the MENU button can directly display the root menu of the title that is playing.
In VCD mode
1. When starting to turn on the PBC function, it will play from the beginning of the disc till it display the PBC menu on TV screen if the disc include the PBC menu.
2. Press the number buttons to select your desired track to play.
In MP3/WMA mode
1. The root menu is displayed on the monitor screen all the time(and the TITLE or MENU button is not available).
2. Press the direction buttons to select your desired FOLDER, then press the
OK or PLAY button to open the FOLDER, and then press the direction buttons to select your desired file, finally press the OK button to play the selected file.
In CD mode, the TITLE, PBC, MENU buttons are disabled.
4.7 Playback with Speed
During normal playback, long press the >>|/|<< button on the remote control continuously to fast forwards or backwards at the following speeds: x2, x4, x8, x20, normal.
During speed playback, press the PLAY button to resume normal playback.
4.8 Playback with Slow Speed
During playback , press the SLOW_FWD button to execute the Slow Forward function.
With each consecutive pressing of the SLOW_FWD button, the playback speed decreases. The speed levels in Slow Forward as follows: x1/2,x1/3,x1/4,x1/5,x1/6,x1/7,normal.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement