HI FI-KOMPONENTEN-SYSTEM
SYSTÈME HI FI
SISTEMA HI FI COMPONENTE
HI FI KOMPONENT SYSTEM
HI FI SISTEMA
HI FI SYSTEEM
SISTEMA DE COMPONENTE Hi Fi
HI FI-KOMPONENTTIJÄRJESTELMÄ
ZESTAW HI-FI
HI FI COMPONENT SYSTEM
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUAL DE MANEJO
BRUKSANVISNING
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE OPERAÇÃO
MODELL
MODÈLE
MODELO
MODELL
MODELLO
MODEL
MODELO
MALLI
MODEL
MODEL
XL-HF401PH
KÄYTTÖOHJE
INSTRUKCJA OBSŁUGI
OPERATION MANUAL
AirPlay, the AirPlay logo, iPad, iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in the U.S. and other countries.
DEUTSCH
FRANÇAIS
ESPAÑOL
SVENSKA
ITALIANO
NEDERLANDS
PORTUGUÊS
SUOMI
POLSKI
ENGLISH
12/3/15
Siehe Seiten i bis x und D-1 bis D-24.
Se reporter aux pages i à x et F-1 à F-24.
Consulte las páginas i a x y S-1 a S-24.
Hänvisa till sidorna i till x och V-1 till V-24.
Leggere le pagine i a x e I-1 a I-24.
Raadpleeg de bladzijden i t/m x en N-1 t/m N-24.
Favor consultar as páginas i a x e P-1 a P-24.
Sivut i - x sekä SU-1 - SU-24.
Patrz strony od i do x oraz od 1 PL-1 do PL-24.
Please refer to pages i to x and E-1 to E-24.
XL-HF401PH_Front.fm
BESONDERE ANMERKUNGEN
REMARQUES SPÉCIALES
NOTAS ESPECIALES
SÄRSKILDA ANMÄRKNINGAR
NOTE PARTICOLARI
BIJZONDERE OPMERKINGEN
NOTAS ESPECIAIS
ERITYISHUOMAUTUS
WAŻNE INFORMACJE
SPECIAL NOTES
● Hiermit erklärt SHARP Electronics (Europe) GmbH, dass sich das
● Hierbij verklaart SHARP Electronics (Europe) GmbH dat het
Gerät SHARP Hi Fi-Komponenten-System XL-HF401PH in
Übereinstimmung mit den grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG
befindet. Die Konformitätserklärung kann unter folgender Adresse
gefunden werden:
http://www.sharp.de/doc/XL-HF401PH.pdf
Für die Verwendung in Europa.
Dieses Produkt ist für den Betrieb im Innenbereich konzipiert.
Par la présente, SHARP Electronics (Europe) GmbH déclare que
l’appareil SHARP Système Hi Fi XL-HF401PH est conforme aux
exigences essentielles et aux autres dispositions pertinentes de la
directive 1999/5/CE. La déclaration de conformité peut être
consultée sur le site:
http://www.sharp.de/doc/XL-HF401PH.pdf
Compatible avec une utilisation en Europe.
Ce produit n'est conçu que pour une utilisation en intérieur.
Por la presente, SHARP Electronics (Europe) GmbH, declara que
este SHARP Sistema Hi Fi Componente XL-HF401PH cumple
con los requisitos esenciales y otras exigencias relevantes de la
Directiva 1999/5/EC Pueden consultar la declaración de
conformidad en:
http://www.sharp.de/doc/XL-HF401PH.pdf
Para su uso en Europa.
Este producto es para su uso en interiores solamente.
Härmed intygar SHARP Electronics (Europe) GmbH att denna
SHARP Hi Fi Komponent System XL-HF401PH står I
överensstämmelse rned de väsentliga egenskapskrav och övriga
relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Deklaration om överenstämmelse är tillgänlig på web addressen:
http://www.sharp.de/doc/XL-HF401PH.pdf
För användning i Europa.
Denna produkt är endast avsedd för inomhusbruk.
Con la presente SHARP Electronics (Europe) GmbH dichiara che
questo SHARP Hi Fi Sistema XL-HF401PH è con-forme ai
requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla
direttiva 1999/5/CE. La dichiarazione di conformità può essere
consultata sul sito:
http://www.sharp.de/doc/XL-HF401PH.pdf
Dichiarazione di conformità
La società SHARP Electronics (Europe) GmbH dichiara che
il prodotto SHARP Hi Fi Sistema XL-HF401PH è costruito in
conformità alle prescrizioni del D.M.no 548 del 28/8/95,
pubblicato sulla G.U.no 301 del 28/12/95 ed in particolare è
conforme a quanto indicato nell’art. 2, comma 1 dello stesso
decreto.
Solo per l'Europa.
Questo prodotto e adatto solo per l'utilizzo in interno.
toestel SHARP Hi Fi Systeem XL-HF401PH in overeenstemming
is met de essentiële eisen en de andere relevante bepalingen van
richtlijn 1999/5/EG. De overeen-stemmingsverkiaring is
beschikbaar op:
http://www.sharp.de/doc/XL-HF401PH.pdf
Voor gebruik in Europa.
Dit product is alleen voor gebruik binnenshuis.
Eu, SHARP Electronics (Europe) GmbH, declaro que o SHARP
Sistema De Componente Hi Fi XL-HF401PH cumpre os requisitos
essenciais e outras provisões relevantes da Directiva 1999/5/EC.
A Declaração de conformidade pod ser consultada em:
http://www.sharp.de/doc/XL-HF401PH.pdf
Para uso na Europa.
Este produto destina-se a ser usado apenas dentro de casa.
SHARP Electronics (Europe) GmbH vakuuttaa täten että SHARP
Hi Fi-komponenttijärjestelmä XL-HF401PH tyyppinen laite on
direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen. Vakuutus on nähtävissä
osoitteessa:
http://www.sharp.de/doc/XL-HF401PH.pdf
Käytettäväksi Euroopassa.
Laite sopii käytettäväksi vain sisätiloissa.
Niniejszym SHARP Electronics (Europe) GmbH deklaruje, że
Zestaw Hi-Fi SHARP XL-HF401PH jest zgodny z zasadniczymi
wymaganiami i innymi właściwymi postanowieniami Dyrektywy
1999/5/EC. Deklaracja zgodności jest dostępna pod adresem:
http://www.sharp.de/doc/XL-HF401PH.pdf
Wyłącznie na rynek europejski.
Produkt przeznaczony wyłącznie do eksploatacji
w pomieszczeniach.
Hereby, SHARP Electronics (Europe) GmbH declares that this
SHARP Hi Fi Component System XL-HF401PH is in compliance
with the essential requirements and other relevant provisions of
Directive 1999/5/EC. The declaration of conformity may be
consulted at:
http://www.sharp.de/doc/XL-HF401PH.pdf
For use in Europe.
This product is for indoor use only.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
i
XL-HF401PH new_com.fm
2012 February28
● Bei Einstellung der ON/STAND-BY-Taste auf STAND-BY ist die
● Wanneer de ON/STAND-BY toets in de STAND-BY stand staat,
Netzspannung immer noch im Gerät vorhanden.
Wenn die ON/STAND-BY-Taste auf STAND-BY eingestellt wird,
kann das Gerät unter Verwendung der Timer-Betriebsart oder
Fernbedienung in Betrieb gesetzt werden.
Warnung:
In diesem Gerät sind keine vom Benutzer wartbaren Teile
vorhanden. Niemals Abdeckungen entfernen, außer wenn Sie
dafür qualifiziert sind. In diesem Gerät sind gefährliche
Spannungen vorhanden. Vor Ausführung von irgendwelchen
Kundendienstarbeiten oder bei längerer Nichtverwendung des
Gerätes stets den Netzstecker aus der Netzsteckdose ziehen.
● Quando o botão ON/STAND-BY estiver ajustado na posição
loopt er nog steeds stroom (netspanning) in het toestel.
Wanneer de ON/STAND-BY toets in de STAND-BY stand staat,
kan het toestel ingeschakeld worden via de timerfunctie of de
afstandsbediening.
Waarschuwing:
Dit toestel bevat geen door de gebruiker te repareren onderdelen.
Verwijder de behuizing nooit tenzij u deskundig bent op dit gebied.
In het toestel loopt een gevaarlijke spanning; haal de stekker altijd
uit het stopcontact alvorens onderhoud uit te voeren of wanneer het
toestel voor langere tijd niet gebruikt wordt.
STAND-BY, a voltagem de alimentação ainda se encontra
presente dentro do aparelho.
Quando o botão ON/STAND-BY estiver ajustado na posição
STAND-BY, o aparelho pode ser colocado em operação através do
modo de programação horária ou pelo controle remoto.
Advertência:
Neste aparelho não há partes que podem ser consertadas pelo
usuário. Nunca retire a tampa, a menos que você tenha
qualificação para tal. Este aparelho contém voltagens perigosas.
Remova sempre o cabo de alimentação da tomada antes de
efetuar qualquer conserto ou quando deixar o aparelho muito
tempo fora de uso.
● Lorsque la touche ON/STAND-BY est mise en STAND-BY,
l’appareil est toujours sous tension.
Lorsque la touche ON/STAND-BY se trouve sur la position STANDBY, l’appareil est prêt à fonctionner par la minuterie ou la
télécommande.
Avertissement:
Cet appareil contient des pièces non réparables par l’utilisateur.
Personne non qualifiée n’enlèvera jamais les couvercles. L’appareil
contenant des organes portés à haute tension, débrancher
l’appareil avant toute réparation ou en période de non-utilisation.
● Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, todavía hay tensión dentro del aparato.
Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, el aparato puede ponerse en funcionamiento
utilizando el modo del temporizador o el controlador remoto.
Advertencia:
Tenga en cuenta que dentro de este aparato no hay piezas que
pueda reparar. No quite nunca las tapas a menos que se esté
cualificado para hacerlo. Este aparato tiene en su interior tensiones
peligrosas. Desenchufe siempre la clavija de la red del
tomacorriente antes de realizar cusalquier servicio de
mantenimiento y cuando no se use el aparato durante un largo
período de tiempo.
● Kun ON/STAND-BY -kytkin on STAND-BY-asennossa, laitteessa
on yhä virta.
Kun ON/STAND-BY -kytkin on STAND-BY-asennossa, laite
voidaan kytkeä päälle kaukosäätimestä.
Varoitus:
Laitteen sisällä ei ole käyttäjän huollettavissa olevia osia. Kotelon
saa irrottaa vain siihen pätevöitynyt henkilö. Laitteen sisällä on
vaarallinen jännite. Laite on aina irrotettava verkkovirrasta ennen
huoltotoimenpiteitä ja jos laite on pitkään käyttämättä.
● Gdy urządzenie znajduje się w trybie czuwania, jego wewnętrzne
elementy są pod napięciem.
Gdy urządzenie znajduje się w trybie czuwania, może zostać
włączone przy pomocy zegara lub pilota.
Ostrzeżenie:
Wewnątrz urządzenia nie ma żadnych elementów wymagających
obsługi użytkownika. Obudowa może być zdejmowana wyłącznie
przez wykwalifikowanych pracowników serwisu. Wewnętrzne
elementy urządzenia znajdują się pod napięciem. Przed zdjęciem
odbudowy, lub gdy urządzenie ma zostać przez dłuższy czas
nieużywane, należy wyjąć wtyczkę z gniazdka elektrycznego.
● När ON/STAND-BY knappen är i läge STAND-BY, finns
nätspänning i apparaten.
Med ON/STAND-BY knappen i läge STAND-BY kan apparaten
startas med timerfunktion eller fjärrkontrollen.
Varning:
Apparaten innehåller inga delar som kan åtgärdas av kunden.
Höljet får endast öppnas av kvalificerad personal. Apparaten
innehåller farliga spänningar. Stickkontakten ska därför dras ut från
nätuttaget före reparationsarbeten och bör dras ut om apparaten
inte ska användas på mycket länge.
● When the ON/STAND-BY button is set at STAND-BY position,
mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY position, the
unit may be brought into operation by the timer mode or remote
control.
Warning:
This unit contains no user serviceable parts. Never remove covers
unless qualified to do so. This unit contains dangerous voltages,
always remove mains plug from the socket before any service
operation and when not in use for a long period.
● Quando il tasto ON/STAND-BY si trova in posizione STAND-BY,
all’interno dell’apparecchio c’è ancora la corrente.
Se il tasto ON/STAND-BY si trova nella posizione STAND-BY,
l’unità può essere accesa con il modo timer o con il telecomando.
Avvertenza:
L’apparecchio non contiene parti riparabili dall’utente. Non togliere
mai i coperchi, a meno di non essere qualificati per farlo. All’interno
dell’apparecchio ci sono tensioni pericolose, per cui si deve sempre
staccare la spina del cavo d’alimentazione dalla presa di corrente
prima di qualsiasi intervento di manutenzione e quando non si usa
l’apparecchio per un lungo periodo di tempo.
● Når ON/STAND-BY-knappen er sat i STAND-BY positionen, er der
stadig netspaending til stede i apparatet.
Når ON/STAND-BY-knappen er sat i STAND-BY position, kan
apparatet startes v.hj.a. timer-funksionen eller fjernbetjeningen.
Advarsel:
Apparatet indeholder ingen dele, der kan repareres af brugeren
selv. Fjern aldrig kabinettet med mindre De er kvalificeret hertil.
Apparatet indeholder farlig strømspaending. Traek altid stikket ud
af stikkontakten før der foretages reparationer, eller hvis apparatet
ikke er i brug i laengere tid.
ii
XL-HF401PH new_com.fm
2012 February28
● Vorsicht:
DENNA APPARAT ÄR ANSLUTEN TILL 230 V
VÄXELSTRÖM
NÄR
STICKPROPPEN
ÄR
INSKJUTEN I VÄGGUTTAGET. FÖR ATT
FULLSTÄNDIGT KOPPLA IFRÅN APPARATEN,
V.G. DRAG UT STICKPROPPEN.
●
●
● Audio-visuelles
●
●
●
●
●
●
●
●
●
Material kann Urheberrechte
umfassen, die ohne Genehmigung des Eigentümers
dieser Urheberrechte nicht aufgenommen werden
dürfen. Siehe die entsprechenden nationalen
Gesetze.
Le matériel audio-visuel peut comporter des oeuvres
faisant l’objet de droits d’auteur qui ne peuvent être
enregistrées sans l’autorisation du possesseur du
droit d’auteur, veuillez vous référer aux
réglementations nationales en vigueur.
El material audiovisual puede consistir en trabajos
que tengan derechos de autor y que no deben
grabarse sin la autorización del poseedor de dichos
derechos de autor. Sírvase consultar las leyes
aplicables en su país.
Audiovisuellt
material
kan
innehålla
upphovsrättsarbete som inte skall mångfaldigas utan
tillstånd av copyrightinnehavaren. Se den tillämpliga
lagen i ditt land.
Il materiale audio-visivo che fosse soggetto a
copyright non può essere registrato senza
l’autorizzazione del possessore del copyright. Si
prega di attenersi alle leggi in vigore sul territorio
nazionale.
Audio-visueel materiaal kan worden beschermd door
auteursrechten, in welk geval het niet mag worden
opgenomen zonder de toestemming van de
auteursrechthouder. Zie voor nadere informatie de
betreffende wetten in het land van gebruik.
O material audiovisual pode consistir de trabalhos de
direitos autorias que não devem ser gravados sem
autorização do proprietário dos direitos. Favor
consultar as leis vigentes em seu país.
Audiovisuaalinen
materiaali
saattaa
olla
tekijänoikeudella suojattua, eikä sitä tällöin saa
tallentaa ilman tekijänoikeuden haltijan lupaa.
Lisätietoja
on
maassasi
sovellettavassa
tekijänoikeuslaissa.
Materiał audiowizualny może zawierać utwory
chronione prawem autorskim, które nie mogą być
nagrywane bez zgody właściciela praw autorskich.
Patrz odpowiednie regulacje prawne w danym kraju
Audio-visual material may consist of copyrighted
works which must not be recorded without the
authority of the owner of the copyright. Please refer
to relevant law in your country.
●
●
●
●
●
●
●
Das Gerät weder Tropf- noch Spritzwasser
aussetzen. Ansonsten besteht die Gefahr eines
Brandes oder elektrischen Schlages. Es dürfen keine
mit Flüssigkeiten gefüllten Gegenstände wie Vasen
auf dem Gerät abgestellt werden.
Attention:
Pour éviter un incendie ou une secousse électrique,
mettre l’appareil à l’abri de l’eau (éclaboussure,
goutte). Ne pas poser sur l’appareil un récipient
contenant du liquide.
Advertencia:
Para evitar incendios y descargas eléctricas, no
exponga el aparato a goteo o salpicadura de líquidos.
No deberán ponerse encima del aparato objetos que
estén llenos de líquido, como por ejemplo un florero.
Varning:
Utsätt inte enheten för dropp eller stänk för att
förhindra brand eller elektriska stötar. Inga
vätskefyllda föremål såsom vaser får placeras på
enheten.
Attenzione:
Per prevenire incendi o scosse elettriche, non fare
gocciolare nessun liquido sull’apparecchio e non
bagnarlo. Non collocarvi sopra nessun oggetto
riempito d’acqua, come per esempio vasi.
Waarschuwing:
Stel het toestel niet bloot aan druipend of spattend
water om brand en elektrische schokken te
voorkomen. Met vloeistoffen gevulde voorwerpen,
zoals vazen, mogen niet op het toestel geplaatst
worden.
Cuidado:
Para evitar incêndio ou choque elétrico, não exponha
este aparelho a gotejamento ou salpicamento de
água. Não coloque objetos com água como, por
exemplo, um vaso de flores, em cima do aparelho.
Varoitus:
Tulipalon tai sähköiskun välttämiseksi laitetta ei saa
altistaa tippuvalle tai roiskuvalle vedelle. Nestettä
sisältäviä astioita kuten esim kukkamaljakoita ei saa
asettaa laitteen päälle.
Ostrzeżenie:
Żeby zapobiec niebezpieczeństwu pożaru lub
porażeniu prądem, urządzenie należy chronić przed
zalaniem lub wilgocią. Na urządzeniu nie wolno
ustawiać żadnych zbiorników z wodą - np. wazonów.
Warning:
To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled
with liquids, such as vases, shall be placed on the
apparatus.
iii
XL-HF401PH new_com.fm
2012 February28
● Advarsel:
● Dieses Produkt ist ein Laserprodukt der Klasse 1.
Til at forbygge ild og stød risiko, lad vaere med at undsaette
denne indretning for drypning eller overstaenkning. Der må
ikke anbringes nogen genstande fyldt med vand, som for
eksempel vaser, på dette apparat.
● Ce produit est classifié comme étant un LASER DE
CLASSE 1.
● Este producto está clasificado como un PRODUCTO
● Advarsel:
For å unngå brann eller kortslutning, utsett ikke produktet
for vann eller fuktighet. Gjenstander som inneholder
vaeske, feks. en blomstervase, må ikke plasseres oppå
apparatet.
LÁSER DE CLASE 1.
produkt
klassificeras
som
KLASS
1
LASERPRODUKT.
Questo prodotto è classificato come CLASS 1 LASER
PRODUCT.
Dit product is geclassificeerd als een KLASSE 1 LASER
PRODUCT.
Este produto é classificado como PRODUTO LASER DE
CLASSE 1.
Tämä laite on luokiteltu LUOKAN 1 LASERLAITTEEKSI.
Opisywane urządzenie jest sklasyfikowane jako PRODUKT
LASEROWY KLASY 1.
This product is classified as a CLASS 1 LASER PRODUCT.
● Denna
●
● Varoitus:
●
Älä vie laitetta sateeseen tai kosteisiin tiloihin. Jos laite on
kostunut, anna sen kuivua ennen kuin käytät sitä
verkkovirralla. Nestettä sisältäviä astioita kuten esim.
kukkamaljakoita ei saa asettaa laitteen päälle.
●
●
●
●
“DLNA®, das DLNA Logo und DLNA CERTIFIED™
Markenzeichen, Dienstleistungsmarken oder Gütezeichen
der Digital Living Network Alliance.”
“DLNA®, le logo DLNA et DLNA CERTIFIED™ sont des
marques de commerce, des marques de service ou des
marques de certification de la Digital Living Network Alliance.”
“DLNA®, el logotipo DLNA y DLNA CERTIFIED™ son
marcas registradas, marcas de servicio, o marcas de certificación de Digital Living Network Alliance.”
“DLNA®, DLNA-logotypen och DLNA CERTIFIED™ är
varumärken, tjänster eller certifieringar som tillhör Digital
Living Network Alliance.”
● VORSICHT
Verwendung von Regelungen oder Einstellungen bzw.
Durchführung von anderen Verfahren als die hierin
angegebenen kann zum Aussetzen gefährlicher Strahlung
führen.
Da der in diesem Compact Disc Player verwendete
Laserstrahl für die Augen schädlich ist, ist das Gehäuse
unter keinen Umständen zu zerlegen.
Wenden Sie sich für Wartungsarbeiten nur an berechtigten
Fachhändler.
“DLNA®, il logo DLNA e DLNA CERTIFIED™ sono marchi
depositati, di servizio o di certificazione della Digital Living
Network Alliance.”
“DLNA®, het DLNA logo en DLNA CERTIFIED™ zijn handelsmerken, servicemerken of keurmerken van Digital
Living Network Alliance.”
● ATTENTION
“DLNA®, o logo DLNA e DLNA CERTIFIED™ sao marcas
registadas, marcas de serviço ou marcas certificadas da
Digital Living Network Alliance.”
Respecter les indications données relatives à la
manipulation, au réglage et au fonctionnement. En cas de
non-respect,on s’exposera à une radiation dangereuse.
Éviter absolument de démonter l’appareil, qui utilise un
rayon laser nuisible aux yeux. Pour toute réparation,
s’adresser à une personne qualifiée.
“DLNA®, DLNA-logo ja DLNA CERTIFIED™ ovat Digital
Living Network Alliance -yhtiön tavaramerkkejä, palvelumerkkejä tai sertifiointimerkkejä.”
● PRECAUCIÓN
“DLNA®, logo DLNA i DLNA CERTIFIED™ są znakami
handlowymi, znakami serwisowymi lub znakami certyfikacyjnymi Digital Living Network Alliance.”
El uso de los controles, ajustes o ejecución de
procedimientos distintos de los especificados podría causar
la exposición a radiación peligrosa.
No intente desmontar la caja ya que el haz de láser usado
en este reproductor de discos compactos es perjudicial
para los ojos. Para el servicio de reparación, consulte a una
persona cualificada.
“DLNA®, the DLNA Logo and DLNA CERTIFIED™ are
trademarks, service marks, or certification marks of the
Digital Living Network Alliance.”
iv
XL-HF401PH new_com.fm
2012 February28
● OBSERVERA
Användning av reglage eller justeringar eller handhavande
på annat sätt än som anges kan leda till farlig bestrålning.
Försök inte ta isär höljet eftersom CD-spelarens laserstråle
är skadlig för ögonen. Överlåt service endast till kvalificerad
personal.
● ATTENZIONE
L’uso dei comandi e l’effettuazione di regolazioni e
procedimenti diversi da quelli specificati nel manuale
possono provocare una pericolosa esposizione alle
radiazioni.
Poiché il raggio laser usato in questo giradischi può
danneggiare gli occhi, non smontare l’apparecchio. Per le
riparazioni rivolgersi a personale specializzato.
● LET OP
Gebruik van regelaars, het maken van instellingen, gebruik
of handelingen anders dan in deze gebruiksaanwijzing
vermeld, kan gevaarlijke straling blootleggen.
De laserstraal in deze CD-speler kan de ogen beschadigen,
Probeer derhalve de ombouw niet te verwijderen. Laat
reparaties alleen over aan erkend onderhoudspersoneel.
Eigenschaften der Laserdiode
Material: AIGaAs
Wellenlänge: 790 nm
Emissionsdauer: kontinuierlich
Laser-Ausgang: max. 0.7 mW
● CUIDADO
O uso de controles, ajustes ou a execução de
procedimentos além daqueles especificados aqui pode
resultar em perigosa exposição à radiação.
Como os raios laser usados neste player de CD são
perigosos para os olhos, não tente desmontar o aparelho.
Solicite o conserto somente para pessoas especializadas.
Caractéristiques de la diode laser
Matière: AIGaAs
Longueur d’onde: 790 nm
Durée d’émission: ininterrompue
Puissance de sortie laser maximale: 0.7 mW
● VAROITUS
Características del diodo láser
Material: AIGaAs
Longitud de onda: 790 nm
Duración de emisión : continua
Salida de láser: máx. 0.7 mW
Muiden kuin tässä määriteltyjen ohjaustoimintojen,
säätöjen ja toimintojen käyttö saattaa johtaa vaaralliseen
säteilyaltistumiseen.
Koska tässä cd-soittimessa käytetty lasersäde on silmille
vahingollinen, älä pura soitinta. Ainoastaan pätevä
henkilökunta saa huoltaa laitetta.
Laserdiodens egenskaper
Material: AIGaAs
Våglängd: 790 nm
Utstrålningsvaraktighet: kontinuerlig
Lasereffekt: max. 0.7 mW
● OSTRZEŻENIE
Wykorzystanie
elementów
sterujących
oraz
wykonywanie czynności innych niż opisano w
niniejszej instrukcji może spowodować narażenie na
działanie niebezpiecznego promieniowania.
Ponieważ wiązka lasera zastosowanego w tym
odtwarzaczu płyt CD jest niebezpieczna dla oczu, nie
wolno
samodzielnie
demontować
obudowy
urządzenia. Wszelkie czynności serwisowe należy
zlecać osobom wykwalifikowanym.
Proprietà del diodo laser
Materiale: AIGaAs
Lunghezza d’onda: 790 nm
Durata di emissione: continua
Uscita massima del laser: 0.7 mW
Laser diode specificaties
Materiaal: AIGaAs
Golflengte: 790 nm
Stralingsduur: doorlopend
Laseruitgang: max. 0.7 mW
● CAUTION
Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
As the laser beam used in this compact disc player is
harmful to the eyes, do not attempt to disassemble the
cabinet. Refer servicing to qualified personnel only.
Propriedades do diodo laser
Material: AIGaAs
Comprimento de onda: 790 nm
Duração da emissão: contínua
Saída de laser: máx. 0.7 mW
Laser Diode ominaisuudeet
Materiaali: AIGaAs
Aallonpituus: 790 nm
Päästöjen kesto: jatkuva
Laser ulostulo: maksimi 0.7 mW
Parametry diody laserowej
Materiał: AlGaAs
Długość fali: 790 nm
Okres emisji: ciągły
Moc wyjściowa lasera: maks. 0,7 mW
Laser Diode Properties
Material: AIGaAs
Wavelength: 790 nm
Emission Duration: continuous
Laser Output: max. 0.7 mW
v
XL-HF401PH new_com.fm
2012 February28
”Made for iPod”, ”Made for iPhone” och ”Made for iPad”
innebär att ett elektroniskt tillbehör har designats för att
kopplas specifikt till en iPod, iPhone eller iPad och har
certifierats av utvecklaren för att tillfredsställa Apples
prestandanormer. Apple ansvarar inte för användning av
denna apparat eller dess överensstämmelse med
säkerhetsnormer och föreskrifter. Observera att användning
av detta tillbehör med iPod eller iPhone kan påverka den
trådlösa prestandan.
“Made for iPod”, “Made for iPhone” e “Made for iPad”
significano che un accessorio elettronico è stato progettato
per essere specificamente collegato iPod, iPhone o iPad,
rispettivamente; inoltre, il produttore ne ha certificato la
conformità agli standard di funzionamento Apple. Apple non
si ritiene responsabile circa il funzionamento del presente
dispositivo o la sua conformità con gli standard normativi e
relativi alla sicurezza. L’utilizzo di questo accessorio con
iPod o iPhone potrebbe influire sulle prestazioni wireless.
"Made for iPod", "Made for iPhone" en "Made for iPad"
betekent dat een electronische accessoire ontworpen is om
specifiek aangesloten te worden op de iPod, iPhone of iPad
respectievelijk en gecertificeerd is door de ontwerper om
aan de Apple prestatie maatstaven te voldoen. Apple is niet
verantwoordelijk voor de werking van dit apparaat of zijn
naleving aan veiligheids- en regelgevende maatstaven.
Realiseer u, dat het gebruik van dit accessoire een
negatieve invloed kan hebben op draadloos gebruik van uw
iPod of iPhone.
A indicação “Made for iPod”, “Made for iPhone” e “Made for
iPad” significa que um acessório electrónico foi concebido
para se ligar especificamente ao iPod, iPhone ou iPad,
respectivamente, e foi certificado pelo fabricante para
satisfazer os padrões de desempenho da Apple. A Apple
não é responsável pelo funcionamento deste aparelho ou
pelo cumprimento das normas de segurança e
regulamentares. De salientar que o uso deste acessório
com o iPod ou iPhone pode afectar o desempenho sem fios.
„Made for iPod“, „Made for iPhone“ und „Made for iPad“
bedeutet, dass ein elektronisches Zubehörteil speziell für
den Anschluss an einen iPod, iPhone oder iPad
konzipiert wurde und der Entwickler sich dafür verbürgt,
dass das Gerät den Leistungsstandards von Apple
entspricht. Apple ist nicht verantwortlich für den Betrieb
dieses Gerätes oder dafür, dass es Sicherheits- und
Regulierungsstandards einhält. Bitte beachten Sie, dass
die Nutzung dieses Zubehörteils mit einem iPod oder
iPhone zu einer Beeinträchtigung der drahtlosen
Leistung führen kann.
”Made for iPod”, ”Made for iPhone” ja ”Made for iPad”
tarkoittavat sitä, että elektroninen lisälaite on suunniteltu nimenomaisesti iPod, iPhone tai iPad. Valmistaja on sertifioinut laitteen niin, että se vastaa Applen standardeja. Apple ei
ole vastuussa laitteen toiminnasta tai sen yhdenmukaisuudesta turvallisuus- ja sääntelystandardien kanssa. Huomaa,
että tämän lisälaitteen käyttö iPodin tai iPhonen kanssa
saattaa vaikuttaa langattoman verkon toimintaan.
Oznaczenia “Made for iPod,” “Made for iPhone,” oraz
“Made for iPad” oznaczają, że dane wyposażenie zostało
zaprojektowane specjalnie do współpracy z urządzeniem
iPod, iPhone lub iPad i posiadają certyfikat producenta na
zgodność z normami firmy Apple. Firma Apple nie ponosi
odpowiedzialności za działanie tego wyposażenia ani jego
zgodności z normami dotyczącymi bezpieczeństwa i innymi
przepisami. Należy pamiętać o tym, że użytkowanie
niniejszego zestawu z urządzeniem iPod, iPhone lub iPad
może
niekorzystnie
oddziaływać
na
łączność
bezprzewodową.
Les termes « Made for iPod » , « Made for iPhone » et « Made
for iPad » indiquent qu’un accessoire électronique a été
spécifiquement conçu pour se raccorder respectivement à un
iPod, iPhone ou iPad, et satisfait, sous certification du
développeur, aux normes de performance d’Apple. Apple
n’est pas responsable de l’emploi de cet appareil ni de sa
conformité aux normes réglementaires et de sécurité. Veuillez
noter que l’utilisation de cet accessoire avec l’iPod ou l’iPhone
peut affecter les performances sans fil.
“Made for iPod”, “Made for iPhone” y “Made for iPad”
significa que se ha diseñado un accesorio electrónico
para conectar específicamente al iPod, iPhone o iPad,
respectivamente, y el fabricante ha certificado que
cumple con las normas de desempeño de Apple. Apple
no se responsabiliza por el funcionamiento de este
dispositivo ni por su cumplimiento con las normas de
seguridad y regulatorias. Tenga en cuenta que el uso de
este accesorio con el iPod o el iPhone puede afectar el
funcionamiento del inalámbrico.
“Made for iPod,” “Made for iPhone,” and “Made for iPad”
mean that an electronic accessory has been designed to
connect specifically to iPod, iPhone, or iPad, respectively,
and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect wireless
performance.
vi
XL-HF401PH new_com.fm
2012 February28
Entsorgungsinformationen
Información sobre la eliminación
A. Entsorgungsinformationen für Benutzer aus Privathaushalten
1. In der Europäischen Union
Achtung: Ihr
Produkt trägt
dieses Symbol.
Es besagt,
dass Elektround
Elektronikgeräte nicht mit
dem
Haushaltsmüll
entsorgt,
sondern einem
getrennten
Rücknahmesystem
zugeführt
werden sollten.
A. Información sobre eliminación para usuarios particulares
1. En la Unión Europea
Achtung: Werfen Sie dieses Gerät zur Entsorgung bitte nicht in den
normalen Hausmüll!
Gemäß einer neuen EU-Richtlinie, die die ordnungsgemäße Rücknahme,
Behandlung und Verwertung von gebrauchten Elektro- und
Elektronikgeräten vorschreibt, müssen elektrische und elektronische
Altgeräte getrennt entsorgt werden.
Nach der Einführung der Richtlinie in den EU-Mitgliedstaaten können
Privathaushalte ihre gebrauchten Elektro- und Elektronikgeräte nun
kostenlos an ausgewiesenen Rücknahmestellen abgeben*.
In einigen Ländern* können Sie Altgeräte u.U. auch kostenlos bei Ihrem
Fachhändler abgeben, wenn Sie ein vergleichbares neues Gerät kaufen.
*) Weitere Einzelheiten erhalten Sie von Ihrer Gemeindeverwaltung.
Wenn Ihre gebrauchten Elektro- und Elektronikgeräte Batterien oder Akkus
enthalten, sollten diese vorher entnommen und gemäß örtlich geltenden
Regelungen getrennt entsorgt werden.
Durch die ordnungsgemäße Entsorgung tragen Sie dazu bei, dass
Altgeräte angemessen gesammelt, behandelt und verwertet werden. Dies
verhindert mögliche schädliche Auswirkungen auf Umwelt und Gesundheit
durch eine unsachgemäße Entsorgung.
2. In anderen Ländern außerhalb der EU
Bitte erkundigen Sie sich bei Ihrer Gemeindeverwaltung nach dem
ordnungsgemäßen Verfahren zur Entsorgung dieses Geräts.
Für die Schweiz: Gebrauchte Elektro- und Elektronikgeräte können
kostenlos beim Händler abgegeben werden, auch wenn Sie kein neues
Produkt kaufen. Weitere Rücknahmesysteme finden Sie auf der
Homepage von www.swico.ch oder www.sens.ch.
B. Entsorgungsinformationen für gewerbliche Nutzer
1. In der Europäischen Union
Wenn Sie dieses Produkt für gewerbliche Zwecke genutzt haben und nun
entsorgen möchten:
Bitte wenden Sie sich an Ihren SHARP Fachhändler, der Sie über die
Rücknahme des Produkts informieren kann. Möglicherweise müssen Sie
die Kosten für die Rücknahme und Verwertung tragen. Kleine Produkte
(und kleine Mengen) können möglicherweise bei Ihrer örtlichen
Rücknahmestelle abgegeben werden.
Für Spanien: Bitte wenden Sie sich an das vorhandene
Rücknahmesystem oder Ihre Gemeindeverwaltung, wenn Sie Fragen zur
Rücknahme Ihrer Altgeräte haben.
2. In anderen Ländern außerhalb der EU
Bitte erkundigen Sie sich bei Ihrer Gemeindeverwaltung nach dem
ordnungsgemäßen Verfahren zur Entsorgung dieses Geräts.
Atención: si quiere desechar este equipo, ¡por favor no utilice el cubo de la
basura habitual!
Los equipos eléctricos y electrónicos usados deberían tratarse por separado de
acuerdo con la legislación que requiere un tratamiento, una recuperación y un
reciclaje adecuados de los equipos eléctricos y electrónicos usados.
Tras la puesta en práctica por parte de los estados miembros, los hogares de
particulares dentro de los estados de la Unión Europea pueden devolver sus
equipos eléctricos y electrónicos a los centros de recogida designados sin
Atención: su coste alguno *.
producto está En algunos países* es posible que también su vendedor local se lleve su viejo
marcado con producto sin coste alguno si Ud. compra uno nuevo similar.
*) Por favor, póngase en contacto con su autoridad local para obtener más
este símbolo.
detalles.
Significa que Si sus equipos eléctricos o electrónicos usados tienen pilas o acumuladores,
los productos por favor deséchelos por separado con antelación según los requisitos locales.
Al desechar este producto correctamente, ayudará a asegurar que los residuos
eléctricos y
reciban el tratamiento, la recuperación y el reciclaje necesarios, previniendo de
electrónicos
esta forma posibles efectos negativos en el medio ambiente y la salud humana
que de otra forma podrían producirse debido a una manipulación de residuos
usados no
inapropiada.
deberían
2. En otros países fuera de la Unión Europea
mezclarse con Si desea desechar este producto, por favor póngase en contacto con las
los residuos
autoridades locales y pregunte por el método de eliminación correcto.
Para Suiza: Los equipos eléctricos o electrónicos pueden devolverse al
domésticos
vendedor sin coste alguno, incluso si no compra ningún nuevo producto. Se
generales.
puede encontrar una lista de otros centros de recogida en la página principal de
Existe un
www.swico.ch o www.sens.ch.
sistema de
B. Información sobre Eliminación para empresas usuarias
1. En la Unión Europea
recogida
el producto se utiliza en una empresa y quiere desecharlo:
independiente Si
Por favor póngase en contacto con su distribuidor SHARP, quien le informará
para estos
sobre la recogida del producto. Puede ser que le cobren los costes de recogida
y reciclaje. Puede ser que los productos de tamaño pequeño (y las cantidades
productos.
pequeñas) sean recogidos por sus centros de recogida locales.
Para España: por favor, póngase en contacto con el sistema de recogida
establecido o con las autoridades locales para la recogida de los productos
usados.
2. En otros países fuera de la Unión Europea
Si desea desechar este producto, por favor póngase en contacto con sus
autoridades locales y pregunte por el método de eliminación correcto.
Information om återvinning
Informations sur la mise au rebut correcte
Attention :
votre produit
comporte ce
symbole. Il
signifie que les
produits
électriques et
électroniques
usagés ne
doivent pas
être mélangés
avec les
déchets
ménagers
généraux. Un
système de
collecte
séparé est
prévu pour ces
produits.
Information om återvinning av elektrisk utrustning för hushåll
EU-länder
OBS! Kasta inte denna produkt i soporna!
Förbrukad elektrisk utrustning måste hanteras i enlighet med gällande
miljölagstiftning och återvinningsföreskrifter.
I enlighet med gällande EU-regler ska hushåll ha möjlighet att lämna in
elektrisk utrustning till återvinningsstationer utan kostnad.*
I vissa länder* kan det även hända att man gratis kan lämna in gamla
produkter till återförsäljaren när man köper en ny liknande enhet.
*) Kontakta kommunen för vidare information.
Om utrustningen innehåller batterier eller ackumulatorer ska dessa
först avlägsnas och hanteras separat i enlighet med gällande
miljöföreskrifter.
Genom att hantera produkten i enlighet med dessa föreskrifter kommer
den att tas om hand och återvinnas på tillämpligt sätt, vilket förhindrar
potentiella negativa hälso- och miljöeffekter.
2. Länder utanför EU
Kontakta de lokala myndigheterna och ta reda på gällande sorteringsoch återvinningsföreskrifter om du behöver göra dig av med denna
produkt.
B. Information om återvinning för företag
1. EU-länder
Gör så här om produkten ska kasseras:
Kontakta SHARPs återförsäljare för information om hur man går till
väga för att lämna tillbaka produkten. Det kan hända att en avgift för
transport och återvinning tillkommer. Mindre skrymmande produkter
(om det rör sig om ett fåtal) kan eventuellt återlämnas till lokala
återvinningsstationer.
2. Länder utanför EU
Kontakta de lokala myndigheterna och ta reda på gällande sorteringsoch återvinningsföreskrifter om du behöver göra dig av med denna
produkt.
A.
1.
A. Informations sur la mise au rebut à l'intention des utilisateurs privés
(ménages)
1. Au sein de l'Union européenne
Attention : si vous souhaitez mettre cet appareil au rebut, ne le jetez pas dans
une poubelle ordinaire!
Les appareils électriques et électroniques usagés doivent être traités
séparément et conformément aux lois en vigueur en matière de traitement, de
récupération et de recyclage adéquats de ces appareils.
Suite à la mise en oeuvre de ces dispositions dans les Etats membres, les
ménages résidant au sein de l'Union européenne peuvent désormais ramener
gratuitement* leurs appareils électriques et électroniques usagés sur des sites
de collecte désignés.
Dans certains pays*, votre détaillant reprendra également gratuitement votre
ancien produit si vous achetez un produit neuf similaire.
*) Veuillez contacter votre administration locale pour plus de renseignements.
Si votre appareil électrique ou électronique usagé comporte des piles ou des
accumulateurs, veuillez les mettre séparément et préalablement au rebut
conformément à la législation locale en vigueur.
En veillant à la mise au rebut correcte de ce produit, vous contribuerez à assurer
le traitement, la récupération et le recyclage nécessaires de ces déchets, et
préviendrez ainsi les effets néfastes potentiels de leur mauvaise gestion sur
l'environnement et la santé humaine.
2. Pays hors de l'Union européenne
Si vous souhaitez mettre ce produit au rebut, veuillez contacter votre
administration locale qui vous renseignera sur la méthode d'élimination correcte
de cet appareil.
Suisse : les équipements électriques ou électroniques usagés peuvent être
ramenés gratuitement au détaillant, même si vous n'achetez pas un nouvel
appareil. Pour obtenir la liste des autres sites de collecte, veuillez vous reporter
à la page d'accueil du site www.swico.ch ou www.sens.ch.
B. Informations sur la mise au rebut à l'intention des entreprises
1. Au sein de l'Union européenne
Si ce produit est utilisé dans le cadre des activités de votre entreprise et que
vous souhaitiez le mettre au rebut:
Veuillez contacter votre revendeur SHARP qui vous informera des conditions de
reprise du produit. Les frais de reprise et de recyclage pourront vous être
facturés. Les produits de petite taille (et en petites quantités) pourront être repris
par vos organisations de collecte locales.
Espagne: veuillez contacter l'organisation de collecte existante ou votre
administration locale pour les modalités de reprise de vos produits usagés.
2. Pays hors de l'Union européenne
Si vous souhaitez mettre ce produit au rebut, veuillez contacter votre
administration locale qui vous renseignera sur la méthode d'élimination correcte
de cet appareil.
OBS! Produkten
är märkt med
symbolen ovan.
Denna symbol
indikerar att
elektroniska
produkter inte ska
kastas i det
vanliga
hushållsavfallet
eftersom det finns
ett separat
avfallshanteringssystem för dem.
vii
XL-HF401PH new_com.fm
2012 February28
Informação sobre Eliminação de Produtos
Informações sobre a Eliminação de Produtos para os
Utilizadores (particulares)
1. Na União Europeia
Atenção: Se quiser eliminar este equipamento, não o deve fazer
juntamente com o lixo doméstico comum!
O equipamento eléctrico e electrónico deve ser tratado
separadamente e ao abrigo da legislação aplicável que obriga a
um tratamento, recuperação e reciclagem adequados de
equipamentos eléctricos e electrónicos usados.
Após a implementação desta legislação por parte dos Estadosmembros, todos os cidadãos residentes na União Europeia
poderão entregar o seu equipamento eléctrico e electrónico usado
em estações de recolha específicas a título gratuito*.
Em alguns países* o seu revendedor local também pode recolher
o seu equipamento usado a título gratuito na compra de um novo
equipamento.
*)Contacte as entidades locais para mais informações.
Se o seu equipamento eléctrico e electrónico usado funcionar a
pilhas ou baterias, deverá eliminálas em separado, conforme a
legislação local, e antes de entregar o seu equipamento.
Ao eliminar este produto correctamente estará a contribuir para
que o lixo seja submetido aos processos de tratamento,
recuperação e reciclagem adequados. Desta forma é possível
evitar os efeitos nocivos que o tratamento inadequado do lixo
poderia provocar no ambiente e na saúde.
2. Em outros Países fora da UE
Se quiser eliminar este produto, contacte as entidades locais e
informese sobre o método correcto para proceder à sua
eliminação.
Na Suíça: O equipamento eléctrico e electrónico é aceite, a título
gratuito, em qualquer revendedor, mesmo que não tenha adquirido
um novo produto. Poderá encontrar uma lista das estações de
recolha destes equipamentos na página da Web www.swicho.ch
ou www.sens.ch.
B. Informações sobre a Eliminação de Produtos para
Utilizadores-Empresas
1. Na União Europeia
Se o produto for usado para fins comerciais e quiser eliminá-lo:
Contacte o seu revendedor SHARP que irá informá-lo sobre a
melhor forma de eliminar o produto. Poderá ter de pagar as
despesas resultantes da recolha e reciclagem do produto. Alguns
produtos mais pequenos (e em pequenas quantidades) poderão
ser recolhidos pelas estações locais.
Na Espanha: Contacte o sistema de recolhas público ou as
entidades locais para mais informações sobre a recolha de
produtos usados.
2. Em outros Países fora da UE
Se quiser eliminar este produto, contacte as entidades locais e
informese sobre o método correcto para proceder à sua
eliminação.
Tietoja laitteen hävittämisestä
A.
Atenção: O seu
produto está
identificado com
este símbolo.
Significa que
os produtos
eléctricos e
electrónicos não
devem ser
misturados com
o lixo doméstico
comum. Existe
um sistema de
recolhas
específico para
estes produtos.
Hävitysohjeet käyttäjille (yksityiset kotitaloudet)
Euroopan unionissa
Huomio: Jos haluat hävittää tämän laitteen, älä käytä tavallista
jätesäiliötä.
Käytetyt sähkö- ja elektroniikkalaitteet pitää hävittää erikseen noudattaen lainsäädäntöä, joka takaa käytettyjen sähkö- ja elektroniikkalaitteiden oikean käsittelyn, keräämisen ja kierrättämisen.
Jäsenvaltioiden täytäntöönpanoa seuraten yksityiset kotitaloudet
EU:n jäsenvaltioissa voivat palauttaa käytetyt sähkö- ja elektroniikkalaitteet määrättyihin keräyspaikkoihin ilmaiseksi*. Joissakin
maissa* paikalliset vähittäismyyjät voivat myös ottaa vastaan vanhan tuotteen ilmaiseksi, jos asiakas ostaa vastaavan uuden tuotteen.
*) Pyydä lisätietoja paikallisviranomaisilta.
Jos käytetyissä sähkö- tai elektroniikkalaitteissa käytetään paristoja
tai akkuja, hävitä nämä tuotteet etukäteen erikseen paikallisten
säädösten mukaisesti.
Hävittämällä tuotteen asiamukaisesti, autat varmistamaan, että jätteet käsitellään, kerätään ja kierrätetään asianmukaisella tavalla.
Näin vältytään haitallisilta ympäristö- ja terveysvaikutuksilta, joita
saattaa olla seuraamuksena jätteen epäasianmukaisesta käsittelystä.
2. Muissa maissa EU:n ulkopuolella
Jos haluat hävittää tuotteen, ota yhteys paikallisiin viranomaisiin ja
pyydä ohjeita tuotteen asianmukaiseen hävittämiseen.
B. Hävitysohjeet yrityskäyttäjille
1. Euroopan unionissa
Jos tuotetta on käytetty yrityskäytössä, ja haluat hävittää sen,
Oota yhteys SHARP-jälleenmyyjään, joka antaa sinulle lisäohjeita
tai ottaa tuotteen vastaan. Sinulta saatetaan veloittaa tuotteen vastaanottamisesta ja kierrätyksestä johtuvat kustannukset. Paikalliset
keräyspisteet saattavat ottaa vastaan pienet tuotteet (ja pienet
määrät).
2. Muissa maissa EU:n ulkopuolella
Jos haluat hävittää tuotteen, ota yhteys paikallisiin viranomaisiin ja
pyydä ohjeita tuotteen asianmukaiseen hävittämiseen.
A.
1.
Huomio: Tuote
on merkitty
tällä symbolilla. Tämä
tarkoittaa, että
käytettyjä sähkö- ja elektroniikkalaitteita
ei saa sekoittaa
kotitalouden
yleisjätteiden
kanssa. Näille
tuotteille on
olemassa erillinen
keräysjärjestelmä.
viii
XL-HF401PH new_com.fm
2012 February28
Informacje dotyczące usuwania zużytego urządzenia
Informazioni per un corretto smaltimento
Attenzione: Il
dispositivo è
contrassegnato
da questo
simbolo, che
segnala di non
smaltire le
apparecchiature
elettriche ed
elettroniche
insieme ai
normali rifiuti
domestici. Per tali
prodotti è previsto
un sistema di
raccolta a parte.
A.
Attenzione: Per smaltire il presente dispositivo, non utilizzare il normale
bidone della spazzatura!
Le apparecchiature elettriche ed elettroniche usate devono essere gestite a
parte e in conformità alla legislazione che richiede il trattamento, il recupero
e il riciclaggio adeguato dei suddetti prodotti.
In seguito alle disposizioni attuate dagli Stati membri, i privati residenti nella
UE possono conferire gratuitamente le apparecchiature elettriche ed
elettroniche usate a centri di raccolta designati*.
In alcuni paesi*, anche il rivenditore locale può ritirare gratuitamente il vecchio
prodotto se l'utente acquista un altro nuovo di tipologia simile.
*) Per maggiori informazioni si prega di contattare l'autorità locale
competente.
Se le apparecchiature elettriche o elettroniche usate hanno batterie o
accumulatori, l'utente dovrà smaltirli a parte preventivamente in conformità
alle disposizioni locali.
Lo smaltimento corretto del presente prodotto contribuirà a garantire che i
rifiuti siano sottoposti al trattamento, al recupero e al riciclaggio necessari
prevenendone il potenziale impatto negativo sull'ambiente e sulla salute
umana, che potrebbe derivare da un'inadeguata gestione dei rifiuti.
2. In paesi che non fanno parte dell'UE
Se si desidera eliminare il presente prodotto, contattare le autorità locali e
informarsi sul metodo di smaltimento corretto.
Per la Svizzera: Le apparecchiature elettriche o elettroniche usate possono
essere restituite gratuitamente al rivenditore, anche se non si acquista un
prodotto nuovo. Altri centri di raccolta sono elencati sulle homepage di
www.swico.ch o di www.sens.ch.
B. Informazioni sullo smaltimento per gli utenti commerciali
1. Nell'Unione europea
Se il prodotto è impiegato a scopi commerciali, procedere come segue per
eliminarlo.
Contattare il proprio rivenditore SHARP che fornirà informazioni circa il ritiro
del prodotto. Potrebbero essere addebitate le spese di ritiro e riciclaggio.
Prodotti piccoli (e quantitativi ridotti) potranno essere ritirati anche dai centri
di raccolta locali.
Per la Spagna: Contattare il sistema di raccolta ufficiale o l'ente locale
preposto al ritiro dei prodotti usati.
2. In paesi che non fanno parte dell'UE
Se si desidera eliminare il presente prodotto, contattare le autorità locali e
informarsi sul metodo di smaltimento corretto.
1.
Uwaga: Państwa produkt
oznaczony jest
tym symbolem.
Oznacza to, że
zużytego sprzętu elektrycznego i
elektronicznego nie należy
łączyć z odpadami zgospodarstw
domowych. Dla
tego typu
produktów istnieje odrębny
system zbiórki
odpadów.
Informatie over verantwoorde verwijdering
Informatie over afvalverwijdering voor gebruikers (particuliere
huishoudens)
In de Europese Unie
Let op: Deze apparatuur niet samen met het normale huisafval weggooien!
Afgedankte elektrische en elektronische apparatuur moet gescheiden worden
ingezameld conform de wetgeving inzake de verantwoorde verwerking,
terugwinning en recycling van afgedankte elektrische en elektronische
apparatuur.
Na de invoering van de wet door de lidstaten mogen particuliere huishoudens
in de lidstaten van de Europese Unie hun afgedankte elektrische en
elektronische apparatuur kosteloos* naar hiertoe aangewezen
inzamelingsinrichtingen brengen*.
In sommige landen* kunt u bij de aanschaf van een nieuw apparaat het oude
product kosteloos bij uw lokale distributeur inleveren.
*) Neem contact op met de plaatselijke autoriteiten voor verdere informatie.
Als uw elektrische of elektronische apparatuur batterijen of accumulatoren
bevat dan moet u deze afzonderlijk conform de plaatselijke voorschriften
weggooien.
Door dit product op een verantwoorde manier weg te gooien, zorgt u ervoor
dat het afval de juiste verwerking, terugwinning en recycling ondergaat en
potentiële negatieve effecten op het milieu en de menselijke gezondheid
worden voorkomen die anders zouden ontstaan door het verkeerd verwerken
van het afval.
2. In andere landen buiten de Europese Unie
Als u dit product wilt weggooien, neem dan contact op met de plaatselijke
autoriteiten voor informatie omtrent de juiste verwijderingsprocedure.
Voor Zwitserland: U kunt afgedankte elektrische en elektronische apparatuur
kosteloos bij de distributeur inleveren, zelfs als u geen nieuw product koopt.
Aanvullende inzamelingsinrichtingen zijn vermeld op de startpagina van
www.swico.ch of www.sens.ch.
B. Informatie over afvalverwijdering voor bedrijven
1. In de Europese Unie
Als u het product voor zakelijke doeleinden heeft gebruikt en als u dit wilt
weggooien:
Neem contact op met uw SHARP distributeur die u inlichtingen verschaft over
de terugname van het product. Het kan zijn dat u een
afvalverwijderingsbijdrage voor de terugname en recycling moet betalen.
Kleine producten (en kleine hoeveelheden) kunnen door de lokale
inzamelingsinrichtingen worden verwerkt.
Voor Spanje: Neem contact op met de inzamelingsinrichting of de lokale
autoriteiten voor de terugname van uw afgedankte producten.
2. In andere landen buiten de Europese Unie
Als u dit product wilt weggooien, neem dan contact op met de plaatselijke
autoriteiten voor informatie omtrent de juiste verwijderingsprocedure.
A.
1.
Let op: Uw
product is van
dit merkteken
voorzien. Dit
betekent dat
afgedankte
elektrische en
elektronische
apparatuur niet
samen met het
normale
huisafval
mogen worden
weggegooid. Er
bestaat een
afzonderlijk
inzamelingssysteem voor
deze
producten.
Informacje dla użytkowników (prywatne gospodarstwa
domowe) dotyczące usuwania odpadów
W krajach Unii Europejskiej
Uwaga: Jeśli chcą Państwo usunąć to urządzenie, prosimy nie używać
zwykych pojemników na śmieci!
Zużyty sprzęt elektryczny i elektroniczny należy usuwać oddzielnie,
zgodnie z wymogami prawa dotyczącymi odpowiedniego przetwarzania,
odzysku i recyklingu zużytego sprzętu elektrycznego i elektronicznego.
Po wdrożeniu przepisów unijnych w Państwach Członkowskich
prywatne gospodarstwa domowe na terenie krajów UE mogą
bezpłatnie* zwracać zużyty sprzęt elektryczny i elektroniczny do
wyznaczonych punktów zbiórki odpadów. W niektórych krajach* można
bezpłatnie zwrócić stary produkt do lokalnych punktów sprzedaży
detalicznej pod warunkiem, że zakupią Pasńtwo podobny nowy produkt.
*) W celu uzyskania dalszych informacji na ten temat należy
skontaktować się z lokalnymi władzami.
Jeśli zużyty sprzęt elektryczny i elektroniczny jest wyposażony w baterie
lub akumulatory, należy je usunąć oddzielnie, zgodnie z wymogami
lokalnych przepisów.
Jeśli ten produkt zostanie usunięty we właściwy sposób, pomogą
Państwo zapewnić, że odpady zostaną poddane przetworzeniu,
odzyskowi i recyklingowi, a tym samym zapobiec potencjalnym
negatywnym skutkom dla środowiska naturalnego i zdrowia ludzkiego,
które w przeciwnym razie mogłyby mieć miejsce na skutek niewłaściwej
obróbki odpadów.
2. Kraje pozaunijne
Jeśli chcą Państwo pozbyć się produktu, należy skontaktować się z
władzami lokalnymi i uzyskać informacje na temat prawidłowej metody
usunięcia produktu.
Dotyczy Szwajcarii: Zużyte urządzenia elektryczne i elektroniczne
można zwrócić bezpłatnie do dostawcy, bez konieczności zakupu
nowego produktu. Adresy punktów odbioru zużytego sprzętu można
znaleźć na stronie www.swico.ch lub www.sens.ch.
B. Informacje dla użytkowników biznesowych dotyczące usuwania
odpadów
1. W krajach Unii Europejskiej
W przypadku gdy produkt używany jest do celów handlowych i
zamierzają go Państwo usunąć:
Należy skontaktować się z dealerem firmy SHARP, który poinformuje o
możliwości zwrotu wyrobu. Być może będą Państwo musieli ponieść
koszty zwrotu i recyklingu produktu. Produkty niewielkich rozmiarów (i w
małej liczbie) można zwrócić do lokalnych punktów zbiórki odpadów.
Dotyczy Hiszpanii: Skontaktuj się z punktem odbioru lub władzami
lokalnymi w sprawie oddania używanego produktu.
2. Kraje pozaunijne
Jeśli chcą Państwo usunąć ten produkt, należy skontaktować się z
władzami lokalnymi i uzyskać informacje na temat prawidłowej metody
jego usunięcia.
A. Informazioni sullo smaltimento per gli utenti (privati)
1. Nell'Unione europea
Information on Proper Disposal
Information on Disposal for Users (private households)
In the European Union
Attention: If you want to dispose of this equipment, please do not use the
ordinary dustbin!
Used electrical and electronic equipment must be treated separately and
in accordance with legislation that requires proper treatment, recovery
and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households
within the EU states may return their used electrical and electronic
equipment to designated collection facilities free of charge*.
In some countries* your local retailer may also take back your old product
free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or
accumulators, please dispose of these separately beforehand according
to local requirements.
By disposing of this product correctly you will help ensure that the waste
undergoes the necessary treatment, recovery and recycling and thus
prevent potential negative effects on the environment and human health
which could otherwise arise due to inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities
and ask for the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be returned
free of charge to the dealer, even if you don't purchase a new product.
Further collection facilities are listed on the homepage of www.swico.ch
or www.sens.ch.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the takeback of the product. You might be charged for the costs arising from takeback and recycling. Small products (and small amounts) might be taken
back by your local collection facilities.
For Spain: Please contact the established collection system or your local
authority for take-back of your used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities
and ask for the correct method of disposal.
A.
1.
Attention: Your
product is
marked with
this symbol. It
means that
used electrical
and electronic
products
should not be
mixed with
general
household
waste. There
is a separate
collection
system for
these
products.
ix
XL-HF401PH new_com.fm
2012 February28
Informatie over afvalverwerking van batterijen
De batterij die bij dit toestel geleverd wordt bevat sporen van Lood.
Voor EU: De doorgestreepte vuilnisbak op wieltjes duidt aan dat de
gebruikte batterijen niet mogen terechtkomen in het gewone
huishoudelijke afval. Er bestaat een gescheiden ophaalsysteem
voor deze gebruikte batterijen om eigen behandeling en recyclage
volgens de wetgeving toe te laten. Gelieve de locale autoriteiten te
contacteren voor de details van ophaling en recyclage.
Voor Zwitserland: De gebruikte batterij moet bij hetverkooppunt
teruggebracht worden.
Voor andere niet EU landen: Gelieve contact op te nemen met uw
locale autoriteiten voor de correcte methode van verwerking van de
gebruikte batterijen.
Informationen zur Batterieentsorgung
Die für dieses Produkt mitgelieferte Batterie kann Spuren von Blei
enthalten.
Für die EU: Die durchgestrichene Abfalltonne bedeutet, dass
gebrauchte Batterien nicht mit dem Haushaltsmüll entsorgt werden
sollten! Es gibt getrennte Sammelsysteme für gebrauchte Batterien,
welche eine ordnungsgemäße Behandlung und Verwertung
entsprechend gesetzlicher Vorgaben erlauben. Weitere Einzelheiten
erhalten Sie von IhrerGemeindeverwaltung.
Für die Schweiz: Die gebrauchte Batterie kann an der Verkaufsstelle
zurückgegeben werden.
Für andere Nicht-EU Staaten: Bitte erkundigen Sie sich bei Bedarf
bei Ihrer Gemeindeverwaltung nach weiteren Informationen zur
Entsorgung von gebrauchten Batterien.
Information sur la mise au rebut de la pile
Les piles/accus fournies avec ce produit peuvent contenir des traces
de Plomb.
Au sein de l’Union Européenne : Le symbole de la poubelle sur
roues barrée laisse supposer que les piles/accus usagées ne
doivent pas être mélangées avec les déchets ménagers! Il existe un
mode de collecte séparé pour les piles/accus usagées, ce qui
permet d’effectuer un traitement et un recyclage en accord avec la
législation. Veuillez contacter une autorité locale pour plus de
renseignements sur le système mis en place.
Pour la Suisse : Les piles/accus usagées doivent être retournées
chez votre détaillant.
Pour les pays hors Union Européenne : Veuillez contacter une
autorité locale afin de connaître la bonne méthode à utiliser pour la
collecte de vos piles/accus usagées.
Informação sobre Eliminação de Pilhas
A bateria fornecida com este produto contém traços de chumbo.
Para a União Europeia: O contentor de rodas traçado significa que
as baterias usadas não deverão ser colocadas junto com o lixo
doméstico! Existe um sistema de separação próprio para baterias
usadas, para permitir um tratamento e reciclagem própria de acordo
com a legislação em vigor. Por favor contacte as autoridades locais
para mais detalhes nos esquemas de recolha e reciclagem.
Para a Suíça: As baterias usadas deverão ser devolvidas ao ponto
de venda.
Para os outros países fora da União Europeia: Por favor contacte a
sua autoridade local para o método correcto de disposição das
baterias usadas.
Información sobre la eliminación de la batería
Las baterías suministradas con este producto contienen pequeñas
cantidades de Plomo.
Para EU: El contenedor de basura con ruedas tachado indica que
las baterías usadas no deberían mezclarse con los residuos
domésticos generales. Existe un sistema de recogida independiente
de baterías usadas, para permitir un correcto tratamiento y reciclado
de acuerdo con la legislación vigente. Por favor póngase en contacto
con el sistema de recogida establecido o con las autoridades locales
para la recogida selectiva de las baterías usadas.
Para Suiza: Las baterías usadas deben ser retornadas al punto de
venta.
Para otros países fuera de la Unión Europea: Por favor póngase en
contacto con las autoridades locales para un correcto procedimiento
de eliminación de las baterías usadas.
Tietoja paristojen hävittämisestä
Tämän tuotteen mukana oleva paristo/akku saattaa sisältää
jäänteitä Lyijy.
EU-maat: Paristo/akku on merkitty yliviivatun roskasäiliön
symbolilla, mikä tarkoittaa, että sitä ei saa hävittää kotitalouden
yleisjätteiden kanssa. Paristoille/akuille on olemassa erillinen
keräysjärjestelmä, joka helpottaa niiden asiamukaista käsittelyä ja
lainmukaista kierrätystä. Ota yhteys kuntaviranomaisiin saadaksesi
lisätietoa keräyksestä ja kierrätyksestä.
Sveitsi: Käytetyt paristot/akut palautetaan ostopaikkaan.
EU:n ulkopuoliset maat: Ota yhteys paikallisviranomaisiin
saadaksesi lisätietoa voimassa olevista lajittelu- ja
kierrätyssäädöksistä ja ohjeet käytetyn pariston/akun hävittämiseen.
Information om batteriavyttring
Batteriet som följer med denna produkt kan innehålla spår av Bly.
För EU: Batteriet är märkt med den överkorsade soptunnan vilket
betyder att det inte ska kastas i det vanliga hushållsavfallet. Det finns
ett separat insamlingssystem för batterier för att underlätta korrekt
behandling och återvinning enligt gällande lagstiftning. Kontakta
kommunen för vidare information om insamling och återvinning.
För Schweiz: Använda batterier lämnas till inköpsstället.
För länder utanför EU: Kontakta de lokala myndigheterna för
information om gällande sorterings- och återvinningsföreskrifter om
du behöver göra dig av med ett använt batteri.
Informacja na temat usuwania baterii
Bateria dostarczana z tym produktem zawiera śladowe ilości
ołowiu.
W krajach Unii Europejskiej: Przekreślony pojemnik na odpady
oznacza, że zużytych baterii nie należy wyrzucać do pojemników z
odpadami domowymi! Dla zużytych baterii istnieją oddzielne
systemy zbiórki, które zapewnią prawidłowe przetwarzanie i odzysk
zgodnie z obowłąizującym prawem. Szczegóy na temat systemów
zbiórki otrzymają Państwo u lokalnych władz.
W Szwajcarii: Zużyte baterie można zwrócić w punkcie sprzedaży.
Kraje pozaunijne: W celu uzyskania szczegóowych informacji na
temat prawidłowej metody pozbycia się zużytych baterii, proszę o
kontakt z władzami lokalnymi.
Informazioni sullo smaltimento della batteria
La batteria fornita con questo prodotto contiene tracce di Piombo.
Per EU: Il cassonetto barrato indica che le batterie usate non devono
essere gettate assieme ai rifiuti domestici! Vi è un sistema di raccolta
differenziata per le batterie usate, che consente il loro corretto
trattamento e riciclo secondo quanto previsto dalle leggi vigenti. Vi
prego di contattare le locali autorità per i dettagli del sistema di
raccolta e riciclaggio.
Per la Svizzera: Le batterie usate devono essere restituite al punto
vendita.
Per altri Stati non-EU: Vi prego di contattare le autorità locali per
conoscere il metodo corretto di conferimento delle batterie usate.
Information on Battery Disposal
The battery supplied with this product contains traces of Lead.
For EU: The crossed-out wheeled bin implies that used batteries
should not be put to the general household waste! There is a
separate collection system for used batteries, to allow proper
treatment and recycling in accordance with legislation. Please
contact your local authority for details on the collection and recycling
schemes.
For Switzerland: The used battery is to be returned to the selling
point.
For other non-EU countries: Please contact your local authority for
correct method of disposal of the used battery.
x
XL-HF401PH new_com.fm
2012 February28
ENGLISH
● XL-HF401PH Hi Fi Component System consisting of XL-HF401PH (main unit) and CP-HF401H (speaker system).
Introduction
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual
carefully. It will guide you in operating your SHARP product.
Special Note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Accessories
RD
NE
TW
OR
K
S
CD
/U
SB
The following accessories are included.
Adaptors for iPhone x 3
Remote control x 1
(RRMCGA287AWSA)
“AA” size battery
(UM/SUM-3, R6, HP-7 or similar) x 1
FM aerial x 1
Speaker wires x 2
Stand for iPad x 1
CONTENTS
Page
Page
USB
General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . 2 - 3
Listening to USB mass storage device/MP3 player . . . 15
Advanced USB playback . . . . . . . . . . . . . . . . . . . . . . . 16
Preparation for Use
Radio
System connections . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . 16 - 17
Advanced Features
Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting the clock (Remote control only) . . . . . . . . . . . 6 - 7
AirPlay / DLNA
Wi-Fi network setup for AirPlay / DLNA . . . . . . . . . . . 7 - 9
iPod, iPhone and iPad
Listening to the iPod, iPhone or iPad. . . . . . . . . . . . 9 - 11
Using the Radio Data System (RDS) . . . . . . . . . 17 - 19
Timer and sleep operation
(Remote control only) . . . . . . . . . . . . . . . . . . . . . 20 - 21
Enhancing your system . . . . . . . . . . . . . . . . . . . . 21 - 22
References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . 22 - 24
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc . . . . . . . . . . 11 - 12
Advanced CD or MP3/WMA disc playback . . . . . . 12 - 13
MP3/WMA folder mode (only for MP3/WMA files) . . . . 14
E-1
12/3/17
HF401PH_OM_EN.fm
Precautions
■
General
● Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least 10
cm (4") of free space along the sides, top and back of
the equipment.
10 cm (4")
10 cm (4")
10 cm (4")
10 cm (4")
● Use the unit on a firm, level surface free from vibration.
● Place the speakers at least 30 cm (12") away from any
CRT TV to avoid colour variations across the TV
screen. If the variations persist, move the speakers
further away from the TV. LCD TV is not prone to such
variation.
● Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
● Do not place anything on top of the unit.
● Do not expose the unit to moisture, to temperatures
higher than
60°C (140°F) or to extremely low
temperatures.
● If your system does not work properly, disconnect the
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
● In case of an electrical storm, unplug the unit for safety.
● Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
● The AC power plug is used as a disconnect device and
shall always remain readily operable.
● Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local
SHARP service facility.
● The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
● No naked flame sources, such as lighted candles,
should be placed on the apparatus.
● Attention should be drawn to the environmental aspects
of battery disposal.
● This unit should only be used within the range of 5°C 35°C (41°F - 95°F).
● The apparatus is designed for use in moderate
climates.
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may result
in a fire or other type of accident causing damage. SHARP
will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is
specified.
■
Volume control
The sound level at a given volume setting depends on
speaker efficiency, location, and various other factors. It is
advisable to avoid exposure to high volume levels. Do not
turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from
earphones and headphones can cause hearing loss.
Controls and indicators
1
2 3
4
6
7
8
5
9
■
10
11
12 13 14 15 16
Front panel
Page
1. Wi-Fi aerial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Remote sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Timer indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . 20
4. Disc Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5. Docking Station for iPod or iPhone . . . . . . . . . 10
6. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
7. On/Stand-by Button. . . . . . . . . . . . . . . . . . 6, 11, 16
8. FUNCTION Button . . . . . . . . . . . . . . 6, 10,11, 15, 16
9. USB/iPad Terminal. . . . . . . . . . . . . . . . . . . . . . . . 15
10. Audio In Socket . . . . . . . . . . . . . . . . . . . . . . . . . . 21
E-2
12/3/17
HF401PH_OM_EN.fm
Page
11. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . 21
12. Tuner Preset Down, CD/USB Track Down,
iPod/iPhone/iPad Skip Down . . . . . . . . . . . . . 10, 11
13. Tuner Preset Up, CD/USB Track Up,
iPod/iPhone/iPad Skip Up . . . . . . . . . . . . . . . 10, 11
14. Disc/USB Stop Button . . . . . . . . . . . . . . . . . . . . . 12
15. Disc/USB/iPod/iPhone/iPad Play or
Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11
16. Disc Tray Open/Close Button . . . . . . . . . . . . . . . 11
1
2
3
4
5
6
7
8
9
10
Controls and indicators (continued)
■
1
2
Page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . 5
2. On/Stand-by Button . . . . . . . . . . . . . . . . 6, 10, 11, 20
3. Numeric Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4. Bass/Treble Button . . . . . . . . . . . . . . . . . . . . . . . . . 6
5. X-Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6. Tuning Down, Skip Down, Fast Reverse,
Time Down Button . . . . . . . . . . . . . . 6, 11, 14, 16, 20
7. Tuner Preset Up Button,
iPod Cursor Up. . . . . . . . . . . . . . . . . . . . . . 10, 15, 16
8. Volume Down Button . . . . . . . . . . . . . . . . . . . . . . . . 6
9. Folder Button . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
10. Tuner Preset Down Button,
iPod Cursor Down . . . . . . . . . . . . . . . . . . . 10, 15, 16
11. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
12. USB Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
13. iPod Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
14. iPod Display (TV OUT) Button . . . . . . . . . . . . . . . 10
15. Disc/USB Display Button . . . . . . . . . . . . . . . . 14, 15
16. RDS ASPM Button . . . . . . . . . . . . . . . . . . . . . . . . 17
17. Network Button . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8
18. Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . . 11
19. Memory Button . . . . . . . . . . . . . . . . . . . . . . . . 12, 16
20. Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
21. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . 6, 20
22. Sleep Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
23. Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
24. Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
25. Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
26. Tuning Up, Skip Up, Fast Forward,
Time Up Button . . . . . . . . . . . . . . . . 6, 11, 14, 16, 20
27. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . 6
28. Enter Button . . . . . . . . . . . . . . . . . . . . . . 6, 10, 15, 16
29. Demo/Dimmer Button . . . . . . . . . . . . . . . . . . . . . 4, 6
30. Audio/Line (INPUT) Button . . . . . . . . . . . . . . . . 5, 22
31. Tuner Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
32. iPod Play/Pause Button. . . . . . . . . . . . . . . . . . . . . 11
33. iPod Menu Button . . . . . . . . . . . . . . . . . . . . . . . . . 11
34. CD/USB Play/Pause Button. . . . . . . . . . . . . . . 11, 15
35. CD/USB Stop Button . . . . . . . . . . . . . . . . . . . . 11, 15
36. RDS Display Button . . . . . . . . . . . . . . . . . . . . . . . 17
37. RDS PTY Button. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
18
19
20
21
3
22
23
24
25
26
4
5
6
7
8
27
28
29
9
10
11
12
13
14
15
30
31
32
33
34
35
36
37
CD/USB
RDS
16
17
9
1 23
4 5
17
18 19 20 21
■
1.
2.
3.
4.
■
6 7 8
15
10 1112 13 14 16
■
22
23 24 25 26
27 28 29
1
3
2
4
Speaker grilles are removable
Make sure nothing comes into contact
with the speaker diaphragms when
you remove the speaker grilles.
E-3
12/3/17
HF401PH_OM_EN.fm
Display
Page
1. USB Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2. iPod Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3. CD Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6. RDM (Random) Indicator. . . . . . . . . . . . . . . . . . . . 13
7. MEM (Memory) Indicator . . . . . . . . . . . . . . . . . . . . 13
8. Repeat Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9. Play/Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . 12
10. Tuning FM Indicator. . . . . . . . . . . . . . . . . . . . . . . . 17
11. FM Stereo Mode Indicator . . . . . . . . . . . . . . . . . . . 17
12. Stereo Station Indicator . . . . . . . . . . . . . . . . . . . . 17
13. RDS Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
14. PTY Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
15. TP Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
16. TA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
17. Muting Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
18. X-bass Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
19. Title Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
20. Artist Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
21. Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
22. Album Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
23. File Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
24. Track Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
25. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . 20
26. Once Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . 20
27. Disc Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
28. Total Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
29. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Speaker system
Dome-Tweeter
Woofer
Bass Reflex Duct
Speaker Terminal
Remote control
System connections
Make sure to unplug the AC power lead before making any connections.
Right
speaker
Wi-Fi aerial
Video cable
(not supplied)
FM aerial
TV
To video input socket
Turn the Wi-Fi
aerial upright
before operation.
Left
speaker
Red
Black
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
■
■
Aerial connection
Demonstration (Network Stand-by) mode
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and
position the FM aerial wire in the direction where the
strongest signal can be received.
● The first time the unit is plugged in, the unit will enter
the demonstration mode (refer page 9).
External FM aerial:
Use an external FM aerial (75 ohms coaxial cable) for
better reception. When an external FM aerial is used,
disconnect the supplied FM aerial wire.
● To cancel the demonstration mode, press the DEMO/
DIMMER button (remote control) during power standby mode. The unit will enter the low power consumption
mode.
● If iPod or iPhone is docked, the unit will begin charging.
“Charge Mode” will displayed. Demonstration (Network
Stand-by) mode is invalid during charge mode.
● To return to the demonstration (Network Stand-by)
mode, press the DEMO/DIMMER button again.
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
■
Speaker connection
● Connect the black wire to the
minus (–) terminal, and the red
wire to the plus (+) terminal.
● Use speakers with an impedance
of 4 ohms or more, as lower
impedance speakers can damage
the unit.
● Do not mistake the right and the
Incorrect
left channels. The right speaker is
the one on the right side when you
face the unit.
● Do not let the bare speaker wires touch each other.
● Do not allow any objects to fall into or to be placed in
the bass reflex ducts.
● Do not stand or sit on the speakers. You may be
injured.
■
Connecting iPod or iPhone to TV
Video files from iPod or iPhone can be viewed by
connecting the system to TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO
OUT socket at the back of the unit and set the TV Out on
the iPod or iPhone unit to “ON” position.
Note:
Please make sure to set iPod unit to either NTSC or PAL to
match your TV signal. Please visit Apple’s homepage for
further information.
■
AC power connection
After checking all the connections have been made
correctly, plug the AC power lead of this unit into the wall
socket.
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
E-4
12/3/17
HF401PH_OM_EN.fm
1
2
3
4
5
6
7
8
9
10
System connections (continued)
Remote control
■
■
Subwoofer pre-out connection
You can connect a subwoofer with an amplifier to the
SUBWOOFER PRE OUT socket.
Audio cable
(commercially
available)
Commercially available subwoofer
(amplifier built in)
Battery installation
1 Open the battery cover.
2 Insert the supplied battery according to the terminal
indicated in the battery compartment.
When inserting or removing the battery, push it towards the
(–) battery terminals.
3 Close the cover.
Audio signal
To audio input
socket
To SUBWOOFER
PRE OUT socket
Wi-Fi aerial
Main
unit
Notes:
● No sound is heard from the subwoofer without a built-in
amplifier.
● Subwoofer Pre-out (audio signal): 200mV / 10k ohms at
70 Hz.
■
Line input connection (TV, etc.)
Connect to the TV using an audio cable.
TV
To audio
output sockets
Audio cable
(commercially
available)
Audio signal
Main
unit
Caution:
● Remove the battery if the unit will not be used for a long
period of time. This will prevent potential damage due to
battery leakage.
● Do not use rechargeable battery (nickel-cadmium battery,
etc.).
● Installing the battery incorrectly may cause the unit to
malfunction.
● Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the
like.
Notes concerning use:
● Replace the battery if the operating distance is reduced or
if the operation becomes erratic. Purchase a “AA” size
battery (UM/SUM-3, R6, HP-7 or similar).
● Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
● Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
● Keep the remote control away from moisture, heat, shock,
and vibrations.
■
Test of the remote control
Check the remote control after checking all the connections.
Point the remote control directly at the remote sensor on the
unit. The remote control can be used within the range shown
below:
Remote sensor
To LINE
input
sockets
0.2 m - 6 m
(8" - 20' )
To select Line In function:
● On main unit: Press FUNCTION button repeatedly until
Line In is displayed.
● On remote control: Press AUDIO/LINE (INPUT) button
repeatedly until Line In is displayed.
CD/USB
RDS
NETWORK
E-5
12/3/17
HF401PH_OM_EN.fm
General control
■
Muting
The volume is muted temporarily when pressing the
(MUTE)
button on the remote control. Press again to restore the volume.
■
X-Bass control
When the power is first turned on, the unit will enter the extra
bass mode which emphasises the bass frequencies, and
“X-Bass On” will appear. To cancel the extra bass mode, press
the X-BASS button on the remote control.
CD/USB
RDS
■
■
1 Press the BASS/TREBLE
To turn the power on
button to select “Bass”.
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
■
2 Within 5 seconds, press
the VOLUME (+ or –)
button to adjust the bass.
■
Display brightness control
To dim the display brightness, press the DEMO/DIMMER
button on the remote control.
button to select “Treble”.
the VOLUME (+ or –)
button to adjust the treble.
Dimmer Off (Display is bright).
■
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
■
Function
CD
Direct key power on function
When you press any of the following buttons, the unit turns on.
● iPod, CD, USB, AUDIO/LINE INPUT, TUNER, NETWORK on the
remote control: Selected function is activated.
●
/ button on the main unit: The unit turns on and playback of the last function will start (CD, TUNER, USB, iPod, AUDIO IN, LINE IN, NETWORK)
- 5 ↔ - 4........↔ + 4 ↔ + 5
When the FUNCTION button on main unit is pressed, the
current function will change to different mode. Press the
FUNCTION button repeatedly to select desired function.
Volume control
Turn the volume knob towards VOLUME +/– (on main unit) or press
VOL +/– (on remote control) to increase or decrease the volume.
■
Treble control
1 Press the BASS/TREBLE
Dimmer 2 (Display gets dimmer).
■
- 5 ↔ - 4........↔ + 4 ↔ + 5
2 Within 5 seconds, press
Dimmer 1 (Display is dim).
■
Bass control
FM STEREO
FM MONO
Network
USB
Line In
Audio In
iPod
Note:
The backup function will protect the memorised function mode
for a few hours should there be a power failure or the AC power
lead becomes disconnected.
Setting the clock (Remote control only)
Auto power on
During stand-by mode, when you select XL-HF401PH speaker
through AirPlay icon on your AirPlay device, the unit will
automatically power on to Network function and stream the
music from your AirPlay device.
This condition applies when:
● The AirPlay network has previously been set up
between the unit and your AirPlay device.
● Set the Network Stand-by mode to ON. (refer page 9)
■
AirPlay auto switch
CD/USB
RDS
During other function (CD, TUNER, USB, iPod, Audio In, Line In), when you select XLHF401PH speaker through AirPlay icon on your AirPlay device, the unit will
automatically switch to Network function and stream the music from your AirPlay
device.
This condition applies when:
● The AirPlay network has previously been set up
between the unit and your AirPlay device.
■
Auto power off function
The main unit will enter the stand-by mode (when iPod, iPhone
or iPad is not connected) after 15 minutes of inactivity during:
iPod:
Not docked.
Audio In: No detection of input signal.
CD:
In the stop mode or no disc.
USB:
In the stop mode or no media.
Note:
However, if iPod or iPhone is docked, the unit will begin
charging. “Charge Mode” will be displayed.
E-6
12/3/17
HF401PH_OM_EN.fm
In this example, the clock is set for the 24-hour (0:00) display.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the ENTER button. To adjust the
day, press the
or
button and then press the
ENTER button.
4 Press the
or
button to select 24-hour or 12-hour
display and then press the ENTER button.
The 24-hour display will appear.
(0:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
1
2
3
4
5
6
7
8
9
10
6 On the iPod touch/iPhone/iPad, select ‘Settings’ -->
Setting the clock (Remote control only)
(continued)
‘Wi-Fi’. On the PC/Mac, enter the list of available
wireless networks.
5 To adjust the hour, press the
or
button and then press the ENTER
button. Press the
or
button once to advance the time by 1 hour.
Hold it down to advance continuously.
6 To adjust the minutes, press the
or
button and then press the
ENTER button. Press the
or
button once to advance the time
by 1 minute. Hold it down to advance the time by 5 minutes interval.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
Note:
When power supply is restored after unit is plugged in again or
after a power failure, reset the clock (pages 6 - 7).
To readjust the clock:
Perform “Setting the clock” from step 1. If the “Clock” does not
appear in step 2, step 4 (for selecting the 24-hour or 12-hour
display) will be skipped.
To change the 24-hour or 12-hour display:
1 Clear all the programmed contents. [Refer to “Factory
reset, clearing all memory” on page 23 for details.]
2 Perform “Setting the clock” from step 1 onwards.
Wi-Fi network Setup for AirPlay / DLNA
(AirPlay)
With Apple AirPlay technology, you can stream your music from your
iTunes on a Mac, PC, iPod touch, iPhone, or iPad to external
speakers (XL-HF401PH) via a Wi-Fi network.
AirPlay usage requires:
● MacBook or MacBook Pro running MacOS 10.6.6 or greater.
● iTunes 10.2 or greater (Mac/PC).
● iOS 4.3 or later
- iPod touch (4th, 3rd and 2nd generation)
- iPhone 4S
- iPhone 4
- iPhone 3GS (iPhone 3G cannot support AirPlay)
- iPad 2
- iPad
(DLNA)
DLNA technology enables you to share media from one device to
another via a Wi-Fi network.
DLNA usage requires:
● DLNA compatible devices with appropriate application. (Refer to
your devices’ manual) Support status varies depending on model
and software features such as client and server functions.
● PC with Windows 7.
● DLNA version 1.5
● This product supports audio source with playback capability only.
Streaming (audio and video) from DLNA devices is not supported
by this product.
● DRM file playback (DTCP-IP) is not supported.
● SHARP does not guarantee that this product will work with all
DLNA compatible devices and wireless LAN routers.
Note:
When this unit is placed too near a Wireless LAN device or
microwave, noise interference may occur, causing crackling sound. It
may also reduce the communication speed and cause invalid
connection. If these happen, do the following:
- Place the unit away from the Wireless LAN device or microwave.
- Place the unit closer to the source device.
■ Direct wireless connection
1 Press the ON/STAND-BY button.
2 Press the NETWORK button.
3 Press the iPod MENU button on the remote control.
4 Press the / button to select ‘Wi-Fi Setup’.
SHARP_XL-HF401
Wi-Fi
SHA
SHARP_XL-HF401
For other DLNA compatible devices, turn on the Wi-Fi. For more details,
refer to your devices’ manual.
7 Select SHARP_XL-HF401 from the list of available networks.
8 Launch Music and play desired song on your iPod touch / iPhone or
iPad. For PC/Mac, launch iTunes.
For other DLNA compatible devices, launch the DLNA compatible
media software. For more details, refer to your devices’ manual.
9 Tap / click on the AirPlay icon
.
Select the speaker : SHARP_XL-HF401_xxxxxx.
Sound will be heard from the XL-HF401 speakers via audio
streaming.
Note: The last 6 digits ‘xxxxxx’ is MAC ID.
SHARP_XL-HF401_xxxxxx
■ Connection via wireless router with WPS
1 Press the WPS button on the wireless router.
WPS
2
3
4
5
Press the ON/STAND-BY button.
Press the NETWORK button.
Press the iPod MENU button on the remote control.
Press the / button to select ‘Wi-Fi Setup’.
Press the ENTER button.
6 Press the / button to select ‘WPS’. Press the ENTER button. Wait
until ‘
’ on the display stop blinking and the display shows
"Successfully Connected to [network name]".
7 On the iPod touch/iPhone/iPad, select ‘Settings’ --> ‘Wi-Fi’. On the PC/
Mac, enter the list of available wireless networks. For other DLNA
compatible devices, turn on the Wi-Fi. For more details, refer to your
devices’ manual.
8 Select your router from the list of available networks. Enter your network
password if required.
9 Continue with step 8 to 9 in ‘Direct wireless connection’
Press the ENTER button.
5 Press the / button to select ‘Direct’. Press the ENTER
button. Wait until the display shows ‘Direct Ready’ which
take about 40 seconds.
on this page.
Note:
WPS process (network search) takes about 2 minutes. If
fail to connect, the display will show ‘Cannot connect to
Network. Please try again’. Repeat step 4 to retry.
E-7
12/3/17
HF401PH_OM_EN.fm
Wi-Fi network Setup for AirPlay / DLNA (continued)
■ Connection via SSID (wireless router without WPS)
1 Press the ON/STAND-BY button.
2 Press the NETWORK button on the remote control.
3 Press the iPod MENU button on the remote control.
4 Press the / button to select ‘Wi-Fi Setup’.
Press the ENTER button.
/ button to select ‘SSID Set’. Press the ENTER
button. Wait until the display shows “SSID Ready” which takes
about 40 seconds.
6 On the iPod touch/iPhone/iPad, select ‘Settings’ --> ‘Wi-Fi’.
On the PC/Mac, enter the list of available wireless networks.
For other DLNA compatible devices, turn on the Wi-Fi. For
more details, refer to your devices’ manual.
7 Select Sharp_XL-HF401 from the list of available networks.
8 Open web browser as Safari or Explorer on iPod touch / iPhone
/ iPad or PC/Mac. Type 192.168.1.1 at the address bar.
The XL-HF401 configuration page is displayed.
16Select your router from the list of available networks.
5 Press the
SHARP XL-HF401
192.168.1.1
17Continue with step 8 to 9 in ‘Direct wireless connection’
of page 7.
■
Connection of an AirPlay device to the
same Wi-Fi network
You can add other AirPlay devices to join the same Wi-Fi
network as the unit.
1 On the iPod touch/iPhone/iPad, select ‘Settings’ -->
‘Wi-Fi’. On the PC/Mac, enter the list of available
wireless networks. For other DLNA compatible devices
turn on the Wi-Fi. For more details, refer to your devices’
manual.
2 Select your router SSID from the list of available wireless
networks.
Network Configuration
9 Select Network Configuration tab.
10Select your router SSID from the pull-down list of
Service Set ID (SSID).
3 Wait until successful Wi-Fi connection from the
additional AirPlay devices to the router.
4 Continue with step 8 to 9 in ‘Direct wireless connection’
of page 7.
Notes:
● This product may face some irregularities due to various
unforseen reasons from other devices in the process of Wi-Fi
pairing. Should this happen, unplug the AC power lead, and plug
it back in.
● If the Network function operates incorrectly, do the Network reset
(refer page 23).
SHARP_XL-HF401 xxxxx
■
Various function control during AirPlay / DLNA
Various function can be controlled from the remote control
or your AirPlay / DLNA device.
Function
11Enter your network password if required (for some routers, you may
also need to tick DHCP under Advance Setting).
12Change the name of SHARP_XL-HF401_xxxxxx in AirPlay Device
Name if you like and click Apply (*1).
13Click Apply (*2) at the bottom of the page to apply your settings.
Main unit
Remote
control
Volume up/
down
Play/pause
SHARP XL-HF401
Next/previous
track
Mute
Display
14Click OK to confirm your settings.
15On the iPod touch/iPhone/iPad, select ‘Settings’ -->
‘Wi-Fi’. On the PC/Mac, enter the list of available
wireless networks.
E-8
12/3/17
HF401PH_OM_EN.fm
CD/USB
AirPlay
device
1
2
3
4
5
6
7
8
9
10
Wi-Fi network Setup for AirPlay / DLNA (continued)
Notes:
● For DLNA compatible devices, the function control may
vary depending on DLNA application used.
● To enable this unit to control iTunes software, the
setting below is required.
For Mac iTunes:
1 On the toolbar menu, click iTunes and select Preferences.
2 Under Devices tab, check the ‘
Allow iTunes audio control
from remote control speakers’ box.
● The headphone output of the main unit is switched off during inserting
iPod, iPhone and iPad unit. This is an Apple product specification.
■
1 Insert the connector to the iPod, iPhone or iPad.
iPad
For Windows iTunes:
1 On the toolbar menu, click Edit and select Preferences.
2 Under Devices tab, check the ‘
Allow iTunes control from
remote control speakers’ box.
■
Network Stand-by mode
On: Network Stand-by mode is enable.
During stand-by mode, if select XL-HF401PH speakers through AirPlay
icon and tap/click PLAY on AirPlay device, the unit will automatically power
on and stream the music from your AirPlay device.
To enable the Network Stand-by mode :
During Stand-by mode, press DEMO/DIMMER button on remote
control to select the Network Stand-by mode on or off.
To check the IP address of the router / Mac ID / SSID:
1 Press iPod MENU button on the remote control.
2 Press / button on the remote control repeatedly.
The display will toggle as below:
Wi-Fi Setup
IP address
iPod, iPhone and iPad connection via USB terminal
Connector
2 Place the iPad to the stand for iPad.
iPad
Stand for iPad
3 Connect the iPod, iPhone or iPad to the unit via USB
SSID
(when using router)
connector.
Mac ID
Listening to the iPod, iPhone or iPad
Made for:
● iPod touch (4th generation)
● iPod touch (3rd generation)
● iPod touch (2nd generation)
● iPod touch (1st generation)
● iPod classic
● iPod nano (6th generation)
● iPod nano (5th generation)
● iPod nano (4th generation)
● iPod nano (3rd generation)
● iPod nano (2nd generation)
● iPhone 4S
● iPhone 4
● iPhone 3GS
● iPhone 3G
● iPhone
● iPad 2
● iPad
Note:
USB terminal does not support VIDEO out.
Caution:
Please update your iPod, iPhone and iPad unit to the latest
software version before using it. Please visit Apple’s homepage to
download the latest version for your iPod, iPhone and iPad.
Notes:
● Charging terminal for iPod, iPhone and iPad:
Condition
DOCK
USB terminal
USB function
YES
YES
(without iPod
or iPhone docking)
Other function
YES
NO
(iPod / CD / Network /
Tuner / Audio In / Line
In)
Stand-by
YES
NO
● The message “This accessory is not made to work with iPhone” or
similar, may appear on the iPhone screen when:
- battery is low.
- the iPhone is not properly docked (eg. slanting).
If this occurs, remove and re-dock the iPhone.
● This product is made for iPod, iPhone and iPad. To prevent
random interference when iPod, iPhone or iPad is
connected, the headphone output of the main unit is
disabled, and “HP INVALID” will be displayed.
You may also experience brief audio interference during
incoming calls.
■ iPod, iPhone or iPad playback via USB terminal
1 Press the ON/STAND-BY button to turn the power on.
2 Press the USB button on the remote control or FUNCTION button
repeatedly on the main unit to select USB function.
3 Connect iPod, iPhone or iPad to the unit. “USB/iPod” will appear.
File name
4 Press the / (CD/USB
Note:
Stop button ( ) is invalid during iPod, iPhone or iPad playback.
■
HF401PH_OM_EN.fm
iPhone playback
● Sound will only switch from iPhone to the main unit after
authentication process is completed in approximately 10
seconds.
● Incoming calls will pause the playback.
● Once the calls are answered, the conversation can only be
heard through the built-in iPhone speaker. Turn on the iPhone
speaker or undock the iPhone to start conversation.
E-9
12/3/17
/ ) button to start playback.
Listening to the iPod, iPhone or iPad (continued)
■ iPod and iPhone connection (Dock only)
Caution:
■
Unplug all accessories from the iPod or iPhone before
inserting it into the dock.
Note:
Docking station is not recommended for iPad connection.
Adaptor for iPod and iPhone connection
Notes:
● Please use the adaptor supplied with your iPod or iPhone unit.
● You can use an audio cable to connect your iPod to the AUDIO
IN socket if:
1. your iPod adaptor does not fit into the iPod dock on the
main unit.
2. you have an iPod that does not have an iPod adaptor.
3. you have an iPod that does not have an iPod 30 pin
connector.
Adaptor No.
12
15
15
19
19
■
iPod or iPhone playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the iPod button on the remote control or FUNCTION
button repeatedly on the main unit to select iPod function.
3 Insert iPod or iPhone unit into the dock of main unit. “DOCK
OK” will appear.
4 Press the / (iPod
/ ) button to start playback.
iPhone Description
iPhone
iPhone 3G
iPhone 3GS
iPhone 4
iPhone 4S
To insert adaptor for iPod or iPhone
CD/USB
RDS
1 Open the docking station for iPod and iPhone by pulling
up the cover.
■
To disconnect iPod, iPhone or iPad
Simply remove the iPod or iPhone from the docking station
or iPad connector from USB terminal. It is safe to do so
even during playback.
2 Insert the adaptor for iPod or iPhone into unit and
■
connect your iPod or iPhone.
iPhone (bottom)
iPhone
Watching videos on a TV connected to
iPod or iPhone
1 Press the iPod DISPLAY (TV OUT) button for more
than 2 seconds until “TV OUT ON” appear on display.
Dock connector
Adaptor for iPhone
Dock for iPhone
Connector for iPhone
■
To remove adaptor for iPod or iPhone
Insert the tip of a screwdriver (“–” type,
small) into the adaptor hole as shown
and lift upward to remove.
2 Press the ENTER button to start playback.
Notes:
● If the TV Out setting is already turned on at video menu,
the video is automatically displayed on the TV screen
when ENTER key is pressed.
● TV out display is not support through USB terminal.
(iPad)
● To return to watching video on iPod or iPhone screen,
press the MENU button to enter video menu. Then
press the iPod DISPLAY (TV OUT) button for more
than 2 seconds until “TV OUT OFF” appears.
● During iPod or iPhone video playback, pressing the
iPod DISPLAY (TV OUT) button will not toggle video
out display between iPod and TV.
Caution:
● Unplug all accessories for the iPod or iPhone before
inserting it into the docking station.
● Stop button ( ) at main unit is invalid during iPod
function.
E-10
12/3/17
HF401PH_OM_EN.fm
1
2
3
4
5
6
7
8
9
10
Listening to the iPod, iPhone or iPad
(continued)
■
Function Main unit
Dock/USB
Navigating the iPod, iPhone or iPad
menus
Remote control
Dock
iPod
Note:
When navigating the iPod, iPhone or iPad menu with remote
control, do not operate any of the buttons on the iPod or iPhone
unit. The volume level is adjusted by turning the volume knob (on
the main unit) or by pressing the VOL (+ or –) button (on the
remote control). Adjusting the volume on the iPod, iPhone or iPad
units give no effect.
Operation
Menu
____
Enter
____
Press to confirm the
selection.
Cursor
Up/Down
____
Press to select the
iPod menu.
1 Press the iPod MENU button to view the menu on iPod,
iPhone or iPad unit. Press it again to go back to previous
menu.
2 Use the PRESET ( or ) button to select an item on the
menu and then press ENTER button.
USB
iPod
Press to view the
iPod menu during
iPod function.
Listening to a CD or MP3/WMA disc
iPod, iPhone and iPad operations:
The operations described below depend on the generation iPod,
iPhone and iPad you are using.
System on operation:
When the main unit is powered on, the iPod, iPhone or iPad units
will automatically power on when docked or connected in the unit.
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked iPod,
iPhone or connected iPad unit will automatically turn to stand-by
mode.
■
Various iPod, iPhone and iPad functions
Function Main unit
Dock/USB
Play
Remote control
Dock
USB
iPod
CD/USB
Operation
CD/USB
RDS
Press in the pause
mode.
Press in the
playback mode.
This system can play back a standard CD, CD-R/RW in the CD format
and CD-R/RW with MP3 or WMA files, but cannot record on them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.
Track up/
down
Press in the
playback or pause
mode.
If you press the
button in the pause
mode, press the /
button to start the
desired track.
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3. MP3 is a type of audio code which
is processed by significant compression from the original
audio source with very little loss in sound quality.
● This system supports MPEG 1 Layer 3 and VBR files.
● During VBR file playback, time counter in the display may
differ from its actual playback time.
● Bitrate which is supported by MP3 is 32 ~ 320 kbps.
Fast
forward/
reverse
Press and hold
down in the
playback mode.
Pause
iPod
CD/USB
Release the button
to resume
playback.
WMA:
WMA files are Advanced System Format files that include
audio files which are compressed with Windows Media
Audio codec. WMA is developed by Microsoft as an audio
format file for Windows Media Player.
● “MP3” and “WMA” indicator will light up after the unit reads
information on an MP3 or WMA disc.
● Bitrate which is supported by WMA is 64 ~ 160 kbps.
Toggle
information
display
____
Repeat
____
Press to toggle
repeat mode.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button on the remote control or FUNCTION
Shuffle
____
Press to toggle
shuffle mode.
3 Press the OPEN/CLOSE button to open the disc tray.
4 Place the disc on the disc tray, label side up.
iPod
CD/USB
Press to toggle
infomation display.
■
Disc playback
button repeatedly on the main unit to select CD function.
E-11
12/3/17
HF401PH_OM_EN.fm
Listening to a CD or MP3/WMA disc
(continued)
Advanced CD or MP3/WMA disc
playback
5 Press the OPEN/CLOSE button to close the disc tray.
6 Press the / (CD/USB / ) button to start playback. After
CD/USB
RDS
the last track is played, the unit will stop automatically.
Caution:
● Do not place two discs in one disc tray.
● Do not play discs of special shapes (heart, octagon, etc). It
may cause malfunctions.
● Do not push the disc tray while it is moving.
● If the power fails while the tray is open, wait until the power is
restored.
● If TV or radio interference occurs during CD operation, move
the unit away from the TV or radio.
● Be sure to place 8 cm (3") disc in the middle of the disc tray.
● Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
Notes for CD or MP3/WMA disc:
● When the end of the last track is reached during fast forward,
“END” will appear on the display and CD operation will be
paused. When the beginning of the first track is reached
during fast reverse, the unit will enter the playback mode (only
for CD).
● Rewritable multi-session discs with unfinished writing, can
still be played.
■
Various disc functions
Function
Main
unit
Remote
control
Operation
■
Direct track search
By using the Numeric buttons, the desired tracks on the
current disc can be played.
Use the Numeric buttons on the remote control to select
the desired track while playing the selected disc.
● The Numeric buttons allow you to select up to number 9.
● When selecting number 10 or higher, use the “10+” button.
A. For example, to choose 13
1 Press the “10+” button once.
2 Press the “1” button.
3 Press the “3” button.
Selected track number
B. For example, to choose 130
1
2
3
4
Press the “10+” button twice.
Press the “1” button.
Press the “3” button.
Press the “0” button.
Notes:
● A track number higher than the number of tracks on the
disc cannot be selected.
● During random play, direct search is not possible.
To stop playback:
Press the (CD/USB ) button.
Play
Press in the stop mode.
Stop
Press in the playback
mode.
■
Press in the playback
mode. Press the /
button to resume
playback from the
paused point.
Press in the playback or
stop mode.
If you press the button in
the stop mode, press the
/ button to start the
desired track.
Press and hold down in
the playback mode.
Release the button to
resume playback.
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the REPEAT button repeatedly until “Repeat One”
appears. Press the / (CD/USB / ) button.
To repeat all tracks:
Press the REPEAT button repeatedly until “Repeat All”
appears. Press the / (CD/USB / ) button.
To repeat desired tracks:
Perform steps 1 - 5 in “Programmed play” section on page 13
and then press the REPEAT button repeatedly until “Repeat
All” appears.
To cancel repeat play:
Press the REPEAT button repeatedly until “Normal” appears
and “
” disappears.
Pause
Track
up/
down
Fast
forward/
reverse
Repeat play
Caution:
After performing repeat play, be sure to press the (CD/
USB ) button. Otherwise, the disc will play continuously.
E-12
12/3/17
HF401PH_OM_EN.fm
1
2
3
4
5
6
7
8
9
10
Advanced CD or MP3/WMA disc playback (continued)
■
■
Random play (shuffle)
The tracks on the disc can be played in random order
automatically.
1 While in the stop mode, press the MEMORY button to
enter the programming save mode.
To random play all tracks:
Press RANDOM button on the remote control until “Random”
appears. Press the / (CD/USB / ) button.
To cancel random play:
Press the RANDOM button again. “RDM” indicator will
disappear.
2 Press the PRESET (
or
) button on the remote
control to select the desired folder.
Notes:
● If you press the
button during random play, you can
move to the track selected next by the random operation.
On the other hand, the
button does not allow you to
move to the previous track. The beginning of the track
being played will be located.
● In random play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
■
Programmed play (CD)
You can choose up to 32 selections for playback in the order
you like.
1 While in the stop mode, press the MEMORY button on the
remote control to enter the programming save mode.
select the desired track.
Selected track number
Note: To select track number 10 or higher, refer ’Direct
track search’ on page 12.
3 Repeat step 2 for other tracks. Up to 32 tracks can be
programmed. If you want to check the programmed tracks,
press the MEMORY button repeatedly. If you make a
mistake, the programmed tracks can be cleared by
pressing the CLEAR button.
/ (CD/USB
Then press Numeric buttons on the remote control to
select the desired tracks.
Note: To select track number 10 or higher, refer
’Direct track search’ on page 12.
3 Repeat step 2 for other folder/tracks. Up to 32 tracks
can be programmed.
4 Press the
Notes:
● When a disc is ejected, the programme is automatically
cancelled.
● If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
● During the programme operation, random play is not
possible.
/ ) button to start playback.
HF401PH_OM_EN.fm
/ ) button to start playback.
Adding tracks to the programme:
If a programme has been previously stored, the “MEM”
indicator will be displayed. Press the MEMORY button.
Then follow step 2 to add tracks.
E-13
12/3/17
/ (CD/USB
To cancel the programmed play mode:
During programmed stop mode, press the (CD/USB )
button. The display will show “Memory Clear” and all the
programmed contents will be cleared.
2 Press the Numeric buttons on the remote control to
4 Press the
Programmed play (MP3/WMA)
MP3/WMA folder mode (only for MP3/WMA files)
To play back MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can
download MP3/WMA (Windows Media Audio) music files.
Follow the instructions from the website on how to
download the music files. You can then play back these
downloaded music files by burning them to a CD-R/RW
disc.
● Your downloaded song/files are for personal use only.
Any other usage of the song without owner’s
permission, is against the law.
■
CD/USB
RDS
About folder playback order
If MP3/WMA files are recorded in several folders, a folder
number will be set to each folder automatically.
These folders can be selected by the FOLDER button on
the remote control. If there is no supported file formats
inside the selected folder, the folder is skipped and the next
folder will be selected.
Example: How to set folder number if MP3/WMA format
files are recorded as below figure.
■
Procedure to playback MP3/WMA disc with
folder mode on
To play back CD-R/RW.
1 Press the CD button, and load an MP3/WMA disc.
Press the FOLDER button and disc info will be
displayed.
1 ROOT folder is set as folder 1.
MP3 indicator
WMA indicator
2 As for folders inside ROOT folder (Folder A and Folder
TOTAL indicator
B), the folder which is recorded earlier on the disc will be
set as folder 2 and folder 6.
3 As for folder inside Folder A (Folder C and Folder D), the
folder which is recorded earlier on the disc will be set as
folder 3 and folder 4.
Total number of folder
or ) button to select desired
playback folder. (Folder mode on)
4 Folder E that is inside Folder D will be set as folder 5.
● The folder and file order information which is recorded
on the disc depends on the writing software. There
maybe possibilities that this unit will playback the files
not according to our expected playback order.
● For CD MP3/WMA, 999 numbers of folders and files
inclusive of the folders which have non playable files
can be read.
Folder mode on/off can be operated by the FOLDER
button on the remote control. Files that are played when
folder mode is set to the on position, may differ from those
played back when folder mode is turned off.
ROOT
(FOLDER 1)
FOLDER A
(FOLDER 2)
FOLDER C
(FOLDER 3)
FOLDER D
(FOLDER 4)
FOLDER B
(FOLDER 6)
FILE 1
FILE 2
FILE 3
FILE 4
FILE 5
FILE 6
FOLDER E
(FOLDER 5)
Total number of files
2 Press the PRESET (
FOLDER
indicator
FOLDER number
First track number
in the folder
3 Select desired file to be played back by pressing the
or
button.
4 Press the / (CD/USB / ) button. Playback will start
and file name will be displayed.
● Title, Artist and Album name are displayed if they are
recorded on the disc.
● In case of playback with the folder mode on, press
the PRESET ( or ) button, and the folder can be
selected even though it is in playback/pause mode.
It will continue playback/pause mode in the 1st track
of the selected folder.
● Display content can be changed by pressing the
CD/USB DISPLAY button.
FILE 7
FILE 8
File name display
FILE 9
FILE 10
Counter display
Album display
Folder display
Title display
Artist display
Note:
If “Not Support” is displayed, it means “Copyright protected
WMA file” or “Not supported playback file” is selected.
E-14
12/3/17
HF401PH_OM_EN.fm
1
2
3
4
5
6
7
8
9
10
Listening to USB mass storage device/MP3 player
Caution:
At USB mode, once the iPod or iPhone is docked onto the
unit, the iPod or iPhone will automatically start charging.
‘iPod DOCK Charge Mode’ will be displayed. In order to
listen to any USB mass storage device / MP3 player, the
iPod or iPhone must be removed from the docking station.
2 Press the FOLDER button, and press the PRESET (
or ) button
to select desired playback folder. To start playback with folder mode on,
go to step 4. To change the playback folder, press the PRESET
( or ) button to select another folder.
3 Select desired file to be played back by pressing the
or
button.
4 Press the / (CD/USB / ) button. Playback will start and the file
name will be displayed.
● Title, Artist and Album name are displayed if they are recorded in
the USB memory device.
● Display content can be changed by pressing the
CD/USB DISPLAY button.
■
To remove USB memory device
1 Press the
(CD/USB
) button to stop playback.
2 Disconnect USB memory device from the USB terminal.
CD/USB
RDS
Note:
This product is not compatible with MTP and AAC file
systems from USB mass storage device or MP3 player.
■
To play back USB/MP3 player with folder
mode off
1 Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2 Select desired file to be played back by pressing the
or
button.
3 Press the / (CD/USB / ) button. Playback will start
and the file name will be displayed.
● Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
● Display content can be changed by pressing the
CD/USB DISPLAY button.
Note:
To pause playback:
Press the / (CD/USB
■
/ ) button.
To play back USB/MP3 player with folder mode on
1 Press the USB button on the remote control or FUNCTION button
Notes:
● SHARP will not be held liable for the loss of data while
the USB memory device is connected to the audio
system.
● Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.
● This USB memory’s format supports FAT 16 or FAT 32.
● SHARP cannot guarantee that all USB memory
devices will work on this audio system.
● USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system. iPod, iPhone and iPad is not prone to this
condition.
● This USB memory cannot be operated via USB hub.
● The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
● External HDD-storage cannot be played back via USB
terminal.
● If the data inside the USB memory is large, it may take
longer time for the data to be read.
● This product can play WMA and MP3 files. It will
automatically detect the file type being played. If
unplayable file is played on this product, “Not Support”
is indicated and the file will be automatically skipped.
This will take a few seconds. If abnormal indications
appear on the display due to the unspecified file, turn
off the unit and then turn it on again.
● This product relates to USB mass storage devices and
MP3 players. It may however face some irregularities
due to various unforeseen reasons from some devices.
Should this happen, turn off the unit and then turn it on
again.
● During CD function, MP3 player will not be charging.
repeatedly on main unit to select USB function. Connect the USB
memory device that has MP3/WMA format files on the unit. When the
USB memory is connected to the main unit, the device information will
be displayed.
E-15
12/3/17
HF401PH_OM_EN.fm
Advanced USB playback
Listening to the radio
The following functions are the same as CD
operations:
Page
Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Random play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Programmed play (MP3/WMA) . . . . . . . . . . . . . . . . . .13
Note:
If USB memory device is not connected, “USB No Media”
will be shown on the display.
Notes:
● This unit only supports “MPEG-1 Audio Layer-3”
format. (Sampling Frequency is 32, 44.1, 48kHz)
● Playback order for MP3 files may differ depending on
the writing software used during file download.
● Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
● For MP3/WMA files, please put “.MP3” “.WMA”
extension. Files cannot be played back if there is no
MP3/WMA extension.
● Playlists are not supported on this unit.
● This unit can display Folder Name or File Name up to
32 characters.
● Maximum total number of MP3/WMA files is 65025.
● Total number of folders read is 999 including folder with
non-playable file. However, the display shows only
folder with MP3 files.
● The display playback time may not be displayed
correctly when playing back a variable bitrate file.
● The ID3TAG information supported are TITLE, ARTIST
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the CD/USB
DISPLAY button during file playback or pause mode.
● WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
CD/USB
RDS
■
Tuning
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER button repeatedly to select FM Stereo
or FM Mono.
3 Press the TUNING (
or
) button on the remote
control to tune in to the desired station.
● Manual tuning:
Press the TUNING (
or
) button repeatedly to
tune in to the desired station.
● Auto tuning:
When the TUNING ( or
) button is pressed for
more than 0.5 seconds, scanning will start
automatically and the tuner will stop at the first
receivable broadcast station.
Notes:
● When radio interference occurs, auto scan tuning may
stop automatically at that point.
● Auto scan tuning will skip weak signal stations.
● To stop the auto tuning, press the TUNING ( or
)
button again.
● When an RDS (Radio Data System) station is tuned in,
the frequency will be displayed first, and then the RDS
indicator will light up. Finally, the station name will
appear.
● Full auto tuning can be achieved for RDS stations
“ASPM”, see page 18.
To receive an FM stereo transmission:
● Press the TUNER button to select stereo mode and
“ST” indicator will be displayed. “
” and “ ” will
appear when an FM broadcast is in stereo.
● If the FM reception is weak, press the TUNER button to
extinguish the “ST” indicator. The reception changes to
monaural, and the sound becomes clearer.
E-16
12/3/17
HF401PH_OM_EN.fm
1
2
3
4
5
6
7
8
9
10
Listening to the radio (continued)
Using the Radio Data System (RDS)
■
RDS is a broadcasting service which a growing
number of FM stations provide. These FM stations
send additional signals along with their regular
programme signals. They send their station names,
and information about the type of programme such as
sport, music, etc.
When tuned to an RDS station, “RDS” and the station
name will be displayed.
“TP” (Traffic Programme) will appear on the display when
the received broadcast carries traffic information, and “TA”
(Traffic Announcement) will appear while a traffic
information is on air.
“PTYI” (Dynamic PTY Indicator) will appear while the
Dynamic PTY station is received.
Memorising a station
You can store 40 FM stations in memory and recall them
at the push of a button. (Preset tuning)
1 Perform steps 1 - 3 in “Tuning”.
2 Press the MEMORY button.
3 Within 30 seconds, press the PRESET (
or ) button
to select the preset channel number. Store the stations
in memory, in order, starting with preset channel 1.
4 Within 30 seconds, press the MEMORY button to store
that station in memory. If the “MEM” and preset number
indicators disappear before the station is memorised,
repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a
preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
Note:
The backup function protects the memorised stations for a
few hours should there be a power failure or the AC power
lead become disconnected.
■
You can control the RDS by using the buttons on the
remote control only.
■
Information provided by RDS
Each time the RDS DISPLAY button is pressed, the
display will switch as follows:
To recall a memorised station
1 Press the PRESET (
or
) button for less than 0.5
seconds to select the desired station.
■
To scan the preset stations
The stations saved in the memory can be scanned
automatically. (Preset memory scan)
CD/USB
1 Press the PRESET (
or ) button for more than 0.5
seconds. The preset number will flash and the
programmed stations will be tuned in sequentially, for 5
seconds each.
2 Press the PRESET (
or
desired station is located.
RDS
) button again when the
Station name (PS)
■
Programme type (PTY)
To erase entire preset memory
1 Press the ON/STAND-BY button to enter the stand-by
mode.
Frequency
2 On the main unit, while pressing down the
button,
press the ON/STAND-BY button until “Tuner Clear”
appears.
Radio text (RT)
When tuning in to a station other than an RDS station or
to an RDS station which sends weak signal, the display
will change in the following order:
ON/STAND-BY
E-17
12/3/17
HF401PH_OM_EN.fm
No PS
No PTY
FM 98.80 MHz
No RT
Using the Radio Data System (RDS) (continued)
■
Using the Auto Station Programme
Memory (ASPM)
While in the ASPM operation mode, the tuner will
automatically search for new RDS stations. Up to 40
stations can be stored.
If you have already stored some stations in memory, the
number of new stations you can store will be less.
Notes for radio text:
● The first 14 characters of the radio text will appear for
4 seconds and then they will scroll across the display.
● If you tune in to an RDS station which is not
broadcasting any radio text, “No RT” will be displayed
when you switch to the radio text position.
● While radio text data is received or when the text
contents change, “RT” will be displayed.
■
1 Press the TUNER button on the remote control or
FUNCTION button repeatedly on the main unit to
select TUNER function.
2 Press and hold down the RDS ASPM button on the
remote control.
1 After “ASPM” has flashed for about 4 seconds,
scanning will start (87.50 - 108.00 MHz).
To recall stations in memory
To specify programmed types and select stations
(PTY search):
You can search a station by specifying the programme type
(news, sports, traffic programme, etc. ... see page 19) from
the stations in memory.
1 Press the TUNER button on the remote control or
FUNCTION button repeatedly on the main unit to
select TUNER function.
2 When an RDS station is found, “RDS” will appear
for a short time and the station will be stored in
memory.
2 Press the RDS PTY button on the remote control.
“SELECT” and “PTY TI” will appear alternately for
about 6 seconds.
3 After scanning, the number of stations stored in
memory will be displayed for 4 seconds, and then
“END” will appear for 4 seconds.
3 Within 6 seconds, press the PRESET (
■
Notes for RDS operation
If any of the following events occur, it does not mean
that the unit is faulty:
● “PS”, “No PS” and a station name appear alternately,
and the unit does not operate properly.
● If a particular station is not broadcasting properly or a
station is conducting tests, the RDS reception function
may not work properly.
● When you receive an RDS station whose signal is too
weak, information like the station name may not be
displayed.
● “No PS”, “No PTY” or “No RT” will flash for about 5
seconds, and then the frequency will be displayed.
4 While the selected programme type is flashing (within
6 seconds), press the RDS PTY button again.
After the selected programme type has been lit for 2
seconds, “SEARCH” will appear, and the search
operation will start.
Notes:
● If the display has stopped flashing, start again from
step 2. If the unit finds a desired programme type, the
corresponding channel number will lit for about
8 seconds, and then the station name will remain it.
● If you want to listen to the same programme type of
another station, press the RDS PTY button while the
channel number or station name is flashing. The unit
will look for the next station.
● If no station can be found, “Not Found” will appear for 4
seconds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 3, “TP” will
appear.
(This does not mean that you can listen to the traffic
information at that time.)
When the traffic information is broadcast, “TA” will appear.
E-18
12/3/17
HF401PH_OM_EN.fm
) button
Each time the button is pressed, the programme type
will appear. If the button is held down for more than
0.5 seconds, the programme type will appear
continuously.
To stop the ASPM operation before it is complete:
Press the RDS ASPM button while it is scanning for stations.
The stations which are already stored in memory will be kept
there.
Notes:
● If the same station is broadcasting on different
frequencies, the strongest frequency will be stored in
memory.
● Any station which has the same frequency as the one
stored in memory will not be stored.
● If 40 stations have already been stored in memory, the
scan will be aborted. If you want to redo the ASPM
operation, erase the preset memory.
● If no station have been stored in memory, “END” will
appear for about 4 seconds.
● If the RDS signals are very weak, station names may
not be stored in memory.
● The same station name can be stored in different
channels.
● In a certain area or during certain time periods, the
station names may temporarily be different.
or
to select the programme type.
1
2
3
4
5
6
7
8
9
10
Using the Radio Data System (RDS) (continued)
Descriptions of the PTY (Programme Type) codes, TP
(Traffic Programme) and TA (Traffic Announcement)
You can search for and receive the following PTY, TP and
TA signals.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
Short accounts of facts, events and
publicly expressed views, reportage and
actuality.
Topical programme expanding or
enlarging upon the news, generally in
different presentation style or concept,
including debate, or analysis.
Programmes whose purpose is to impart
advice in the widest sense.
Programme concerned with any aspect
of sport.
Programme intended primarily to
educate, of which the formal element is
fundamental.
All radio plays and serials.
Programmes concerned with any aspect
of national or regional culture, including
language, theatre, etc.
Programmes about the natural sciences
and technology.
Used
for
mainly
speech-based
programmes
usually
of
lightentertainment nature, not covered by
other categories. Examples include:
quizzes, panel games, personality
interviews.
Commercial
music,
which
would
generally be considered to be of current
popular appeal, often featuring in current
or recent record sales charts.
Contemporary modern music, usually
written and performed by young
musicians.
Current contemporary music considered
to be “easy-listening”, as opposed to
Pop, Rock or Classical, or one of the
specialised music styles, Jazz, Folk or
Country. Music in this category is often
but not always, vocal, and usually of
short duration.
Classical music for general, rather than
specialist appreciation. Examples of
music in this category are instrumental
music, and vocal or choral works.
Performances of major orchestral works,
symphonies, chamber music, etc., and
including Grand Opera.
Musical styles not fitting into any of the
other categories. Particularly used for
specialist music of which Rhythm &
Blues and Reggae are examples.
Weather reports and forecasts and
meteorological information.
Stock Market reports, commerce,
trading, etc.
For programmes targeted at a young
audience, primarily for entertainment
and interest, rather than where the
objective is to educate.
Programmes about people and things
that influence them individually or in
groups. Includes: sociology, history,
geography, psychology and society.
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
TEST
ALARM!
NONE
TP
TA
E-19
12/3/17
HF401PH_OM_EN.fm
Any aspect of beliefs and faiths, involving
a God or Gods, the nature of existence
and ethics.
Involving members of the public
expressing their views either by phone or
at a public forum.
Features and programmes concerned
with travel to near and far destinations,
package tours and travel ideas and
opportunities.
Not
for
use
for
announcements about problems, delays,
or roadworks affecting immediate travel
where TP/TA should be used.
Programmes
concerned
with
recreational activities in which the
listener might participate. Examples
include, Gardening, Fishing, Antique
collecting, Cooking, Food & Wine, etc.
Polyphonic,
syncopated
music
characterised by improvisation.
Songs which originate from, or continue
the musical tradition of the American
Southern States. Characterised by a
straightforward melody and narrative
story line.
Current Popular Music of the Nation or
Region in that country's language, as
opposed to International “Pop” which is
usually US or UK inspired and in English.
Music from the so-called “golden age” of
popular music.
Music which has its roots in the musical
culture of a particular nation, usually
played on acoustic instruments. The
narrative or story may be based on
historical events or people.
Programme concerned with factual
matters, presented in an investigative
style.
Broadcast when testing emergency
broadcast equipment or receivers.
Emergency announcement made under
exceptional circumstances to give
warning of events causing danger of a
general nature.
No programme type (receive only).
Broadcasts
which
carry
traffic
announcements.
Traffic announcements are being
broadcast.
Timer and sleep operation (Remote control only)
■
Timer playback
Before setting timer:
● Check that the clock is set to the correct time (refer to
page 6 - 7). If it is not set, you cannot use the timer
function.
● For timer playback: Plug in USB or load discs or dock
iPod to be played.
CD/USB
RDS
1 Press the ON/STAND-BY button to turn the power on.
2 Press and hold the CLOCK/TIMER button.
Timer playback:
The unit turns on and plays the desired source (CD,
TUNER, USB, iPod, AUDIO IN, LINE IN) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer:
Once timer play works for one time only at a preset time.
(“ ” indicator).
Daily timer:
Daily timer play works at the same preset time every day
that we set. For example, set the timer as a wake-up call
every morning.
(“DAILY” indicator).
3 Within 10 seconds, press the
or
button to
select “Once” or “Daily”, and press the ENTER button.
4 Within 10 seconds, press the
or
button to
select “Timer Set”, and press the ENTER button.
5 To select the timer playback source (CD, TUNER, USB,
iPod, AUDIO IN, LINE IN), press the
or
button.
Press the ENTER button.
When you select the tuner, select a station by pressing
the
or
button, and then press the ENTER
button. If a station has not been programmed, “No
Preset” will be displayed and timer setting will be
cancelled.
6 To adjust the day, press the
or
button and then
or
button and then
press the ENTER button.
Using the once timer and daily timer in combination:
For example, use the once timer to listen a radio
programme, and use the daily timer to wake up.
7 To adjust the hour, press the
1 Set the daily timer (pages 20 - 21).
8 To adjust the minutes, press the
press the ENTER button.
or
button and
then press the ENTER button.
2 Set the once timer (pages 20 - 21).
9 Set the time to finish as in steps 7 and 8 above.
1 minute or more
Start
10 Adjust the volume using the VOLUME control, and then
press the ENTER button. Do not turn the volume up too
high.
Once timer
Daily timer
Stop
Start
Stop
11 Press the ON/STAND-BY button to enter the power
stand-by mode. The “TIMER” indicator lights up and
the unit is ready for timer playback.
12 When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The timer indicator will blink during
timer playback.
E-20
12/3/17
HF401PH_OM_EN.fm
1
2
3
4
5
6
7
8
9
10
Timer and sleep operation (Remote control only) (continued)
13 When the timer end time is reached, the system will
To confirm the remaining sleep time:
enter the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every selected day.
It will continue until the daily timer setting is cancelled.
Cancel the daily timer when it is not in use.
1 While “SLEEP” is indicated, press the SLEEP button.
Notes:
● When performing timer playback using another unit
connected to the USB terminal or AUDIO IN jack, select
“USB” or “AUDIO IN” or “LINE IN” in step 5.
● This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn
on or off. To stop the timer playback, follow step
“Cancelling the timer setting” of this page.
1 While “SLEEP” is indicated, press the SLEEP button.
Checking the timer setting:
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
“Once” or “Daily”, and press the ENTER button.
To cancel the sleep operation:
Press the ON/STAND-BY button while “SLEEP” is
indicated. To cancel the sleep operation without setting
the unit to the stand-by mode, proceed as follows.
2 Within 5 seconds, press the “0” button twice until
“SLEEP 00” appears.
■
To use timer and sleep operation together
1 Set the sleep time (steps 1 - 5).
2 While the sleep timer is set, set the timer playback
3 Within 10 seconds, press the
or
button to select
“Timer Call”, and press the ENTER button.
(steps 2 - 9, page 20).
Sleep timer
setting
Cancelling the timer setting:
1 Turn the power on and press and hold down the
Timer playback
setting
1-99 minutes
CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
“Once” or “Daily”, and press the ENTER button.
Sleep operation will
automatically stop
3 Within 10 seconds, press the
or
button to select
“Timer Off”, and press the ENTER button. Timer will be
cancelled (the setting will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
CLOCK/TIMER button.
or
button to select
“Once” or “Daily”, and press the ENTER button.
3 Within 10 seconds, press the
or
button to select
“Timer On” , and press the ENTER button.
4 Press the ON/STAND-BY button to enter the power
stand-by mode.
Sleep operation
The radio, compact disc, iPod, USB, Audio In and Line In
can all be turned off automatically.
1 Play back the desired sound source.
2 Press the SLEEP button.
3 Within 5 seconds, press the Numeric button to set the
time. (1 minute ~ 99 minutes)
Portable audio
player, etc.
Audio cable (not supplied)
4 “SLEEP” will appear.
5 The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
E-21
HF401PH_OM_EN.fm
Timer playback
start time
The connection lead is not included. Purchase a
commercially available lead as shown below.
2 Within 10 seconds, press the
12/3/17
Desired time
Enhancing your system
1 Turn the power on and press and hold down the
■
End
time
Enhancing your system (continued)
■
Note:
To prevent noise interference, place the unit away from the
television.
Listening to the playback sounds of
portable audio player, etc.
■
1 Use a connection lead to connect the portable audio
player etc. to the AUDIO IN socket. When using video
equipment, connect the audio output to this unit and the
video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the AUDIO/LINE (INPUT) button on the remote
control or FUNCTION button repeatedly on main unit to
select AUDIO IN function.
4 Play the connected equipment. If volume level of the
connected device is too high, sound distortion may
occur. Should this happen, lower the volume of the
connected device. If volume level is too low, increase the
volume of the connected device.
Headphones
● Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
● Before plugging in or unplugging the headphone,
reduce the volume.
● Be sure your headphone has a 3.5 mm (1/8") diameter
plug and impedance between 16 and 50 ohms. The
recommended impedance is 32 ohms.
● Plugging in the headphone disconnects the speakers
automatically. Adjust the volume using the VOLUME
control.
Troubleshooting chart
Many potential problems can be resolved by the owner
without calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
■
General
Symptom
Possible cause
● The clock is not set to ● Did a power failure occur?
the correct time.
Reset the clock. (Refer page 6)
● When a button is
● Set the unit to the power
pressed, the unit
stand-by mode and then
does not respond.
turn it back on.
● If the unit still malfunctions,
reset it. (Refer page 23)
● No sound is heard.
● Is the volume level set to “Min”?
● Are the headphones connected?
● Are the speaker wires
disconnected?
■
iPod, iPhone or iPad
Symptom
● No sound is
produced.
No image appears
on the TV/monitor.
Possible cause
● The iPod, iPhone or iPad is
not playing.
● The iPod, iPhone or iPad is not
properly connected to the unit.
● Is the AC power lead of the
unit plugged in?
● The video cable is not
properly connected.
● The TV/monitor’s input
selection is not properly set.
● The iPod TV out feature has
not been set to output video.
● USB terminal do not support video.
● iPod, iPhone or iPad ● The iPod, iPhone or iPad is
will not charge.
not making full contact with
the connector.
● Using iPod (3rd generation).
● The iPod or iPhone is not
supported. Refer to page 9
for compatible models.
● The iPhone battery is low.
● “This accessory is
Please charge the iPhone.
not made to work
with iPhone” or “This ● iPhone is not properly
accessory is not
docked.
supported by iPhone”
appears on iPhone
screen.
E-22
12/3/17
HF401PH_OM_EN.fm
■
CD player
Symptom
Possible cause
● Playback does not
● Is the disc loaded upside
start.
down?
● Playback stops in the ● Does the disc satisfy the
middle or is not
standards?
performed properly. ● Is the disc distorted or
scratched?
● Playback sounds are ● Is the unit located near
skipped, or stopped in
excessive vibrations?
the middle of a track. ● Is the disc very dirty?
● Has condensation formed
inside the unit?
■
Tuner
Symptom
● The radio makes
unusual noises
continuously.
■
Possible cause
● Is the unit placed near the
TV or computer?
● Is the FM aerial placed
properly? Move the aerial
away from the AC power
lead if it is located nearby.
USB
Symptom
● Device cannot be
detected.
Possible cause
● Is there any MP3/WMA file
available?
● Is the device properly
connected?
● Is it an MTP device?
● Does the device contain
AAC file only?
● Playback does not ● Is it a copyright protected
start.
WMA file?
● Is it a false MP3 file?
● Wrong time display. ● Is Variable Bitrate file being
played back?
● Wrong file name
display.
● Is the File Name written in
Chinese or Japanese
characters?
1
2
3
4
5
6
7
8
9
10
Troubleshooting chart (continued)
■
■
Wi-Fi connection
Symptom
● Wi-Fi network
connection failed.
■
Possible cause
● Is your router Wi-Fi
certified?
● WPS-Pin and WPS-PBC
routers is not supported by
this unit.
● Is the SSID broadcast on
the Wi-Fi router enabled?
● Avoid using Wi-Fi channel
which is much overlapped
by the nearby Wi-Fi
network.
● Is the unit placed near a
potential source of
interference which may
affect Wi-Fi signal, such as
microwave ovens?
● Is your PC using a Wi-Fi
network? Ethernet
connection for AirPlay /
DLNA network setup is not
possible.
● Do not use special
characters like ‘%, #, *’ to
rename your router or the
AirPlay device in the
setting menu.
AirPlay / DLNA
Symptom
● No AirPlay icon on
Apple AirPlay
device or iTunes in
my PC.
● AirPlay connection
failed with Mac or
PC.
● Breaking of music
streaming.
●
●
●
●
●
●
●
●
●
●
Possible cause
Is the unit joined to the
AirPlay network?
Is the Bonjour service in
your PC enabled before you
open iTunes?
Firewalls and security
software must be disabled.
Is your network speed fast
enough? Other devices
connected to your home
router might need to be
turned off.
Restart your Apple AirPlay /
DLNA device or this unit.
Stop any internet content
browsing via your home
router.
Enable the Auto Channel
Scan Option on the Wi-Fi
router if available.
Enable the Wireless
Intelligent Stream Handling
(WISH) option on the Wi-Fi
router if available.
Enable the Quality of
Service (QoS) option on the
Wi-Fi router if available.
Other home routers must be
turned off.
Symptom
● The remote control
does not operate.
■
HF401PH_OM_EN.fm
Possible cause
● Is the AC power lead of the
unit plugged in?
● Is the battery polarity
correct?
● Are the batteries dead?
● Is the distance or angle
incorrect?
● Does the remote control
sensor receive strong light?
Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, etc.) or on the transmitter on
the remote control. Condensation can cause the unit to
malfunction. If this happens, leave the power on with no
disc in the unit until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a
soft cloth before operating the unit.
■
If problem occurs
When this product is subjected to strong external
interference (mechanical shock, excessive static
electricity, abnormal supply voltage due to lightning, etc.)
or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on
again.
2 If the unit is not restored in the previous operation,
unplug and plug in the unit again, and then turn the
power on.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
■
Factory reset, clearing all memory
1 Press the ON/STAND-BY button to enter the power
stand-by mode.
2 While pressing down the OPEN/CLOSE button, press
the ON/STAND-BY button until “Clear All” appears.
Caution:
This operation will erase all data stored in memory
including clock, timer settings and tuner preset.
■
Network reset
If the Network function operates incorrectly, do the reset
operation as below:
During Network function, press and hold CLEAR button
until “Network Clear” appears.
This operation will erase the current Wi-Fi setting.
E-23
12/3/17
Remote control
Troubleshooting chart (continued)
■
NO
Before transporting the unit
YES
Correct
Remove the iPod, iPhone, iPad, USB memory device and disc from
the unit. Then, set the unit to the power stand-by mode. Carrying the
unit with iPod, iPhone, iPad or USB memory device left connected
or discs left inside might damage the unit.
■
Care of compact discs
Compact discs are fairly resistant to damage, however mistracking can occur
due to an accumulation of dirt on the disc surface. Follow the guidelines below
for maximum enjoyment from your CD collection and player.
● Do not write on either side of the disc, particularly the non-label side
from which signals are read. Do not mark this surface.
● Keep your discs away from direct sunlight, heat, and excessive
moisture.
● Always hold the CDs by the edges. Fingerprints, dirt, or water on the
CDs can cause noise or mistracking. If a CD is dirty or does not play
properly, clean it with a soft, dry cloth, wiping straight out from the
centre, along the radius.
Maintenance
■
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
● Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.
● Do not apply oil to the inside of the unit. It may cause malfunctions.
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
■
General
Power source
Power
consumption
Dimensions
Weight
AC 220 - 240 V ~ 50/60 Hz
Power on: 40 W
Power stand-by: 0.4 W (*)
Width: 215 mm (8 - 1/2")
Height: 96 mm (3 - 4/5")
136 mm (5 - 2/5") (with Wi-Fi
aerial upright)
Depth: 335 mm (13 - 1/5")
2.8 kg (6.2 lbs.)
( * ) This power consumption value is obtained when the
demonstration mode is cancelled in the power stand-by
mode. Refer to page 4 to cancel the demonstration mode.
■
Amplifier
Output power
Output terminals
Input terminals
■
PMPO: 200 W
MPO: 100 W (50 W + 50 W) (10% T.H.D.)
RMS: 100 W (50 W + 50 W) (10% T.H.D.)
RMS: 66 W (33 W + 33 W) (1% T.H.D.)
Speakers: 4 ohms, 20Hz - 20kHz
Subwoofer Pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Video output: 1 Vp-p
Headphones: 16 ohms
(recommended: 32 ohms)
Audio In (Audio signal):
500 mV/47 k ohms
Line in (Analogue input):
500 mV/47 k ohms
CD player
Type
Signal readout
Single disc multi-play compact disc player
Non-contact, 3-beam
semiconductor laser pickup
D/A converter
Multi bit D/A converter
Frequency response 20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
E-24
12/3/17
HF401PH_OM_EN.fm
■
USB (MP3 / WMA)
USB host interface ● Complies with USB 1.1 (Full
Speed)/2.0 Mass Storage
Class.
● Support Bulk only and CBI
protocol.
Support file
● MPEG 1 Layer 3
● WMA (Non DRM)
Bitrate support
● MP3 (32 ~ 320 kbps)
● WMA (64 ~ 160 kbps)
Other
● Maximum total number of
MP3/WMA files is 65025.
● Maximum total number of
folders is 999 INCLUSIVE of
root directory.
● The ID3TAG information
supported are TITLE, ARTIST
and ALBUM only.
● Supports ID3TAG version 1
and version 2.
File system
● Support USB devices with
support
Microsoft Windows/DOS/FAT
12/FAT 16/ FAT 32.
● 2 kbyte block length for sector.
■
Tuner
Frequency range
Preset
■
FM: 87.5 - 108.0 MHz
40 (FM station)
Speaker
Type
Maximum input
power
Rated input power
Impedance
Dimensions
Weight
2-way type speaker system
2.5 cm (1") Dome-Tweeter
12 cm (4-3/4") Woofer
100 W
50 W
4 ohms
Width: 148 mm (5-13/16")
Height: 262 mm (10-5/16")
Depth: 203.5 mm (8")
2.5 kg (5.4 lbs.)/each
1
2
3
4
5
6
7
8
9
10
*TINSZB223AWZZPV*|
TINSZB223AWZZ
XL-HF401PH_Back.fm
12C R AS 1
2012January19
UP
XL-HF401PH
HI FI COMPONENT SYSTEM
DOWN