Philips 5000 series LED TV 29PFL5937 User manual

Register your product and get support at

www.philips.com/welcome

29PFL5937/V7

EN User manual

Contents

1 Notice 2

2 Important

Product disposal Guidelines

3

4

3 Use your TV 5

4 Use more of your TV 9

5 Play photos, music and videos 12 on USB storage devices

6 Troubleshooting 14

7 Product information

8 Consumer Guidelines

9 Warranty

16

18

19

EN 1

1 Notice

Pixel characteristics

This LCD/LED product has a high number of color pixels. Although it has effective pixels of

99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction.

Warranty

No components are user serviceable Do not open or remove covers to the inside of the product. Repairs may only be done by Philips

Service Centres and official repair shops.

Failure to do shall void any warranty, stated or implied.

Any operation expressly prohibited in this manual, or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty.

2 EN

2 Important

Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply.

Safety

Risk of electric shock or fire!

•

•

•

•

•

Never expose the TV to rain or water.

Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact

Philips Consumer Care to have the TV checked before use.

Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight. To prevent the spread of fire, keep candles or other flames away from the TV, remote control and batteries at all times.

Never insert objects into the ventilation slots or other openings on the TV.

When the TV is swivelled ensure that no strain is exerted on the power cord.

Strain on the power cord can loosen connections and cause arcing.

Risk of short circuit or fire!

• Never expose the remote control or batteries to rain, water or excessive heat.

Avoid force coming onto power plugs.

Loose power plugs can cause arcing or fire.

Risk of injury or damage to the TV!

• Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs.

• When stand mounting the TV, use only the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the combined weight of the TV and the stand.

• When wall mounting the TV, use only a wall mount that can support the weight of the TV. Secure the wall mount to a wall that can support the combined weight of the TV and wall mount.PE Electronics

Ltd. bears no responsibility for improper wall mounting that result in accident, injury or damage.

Risk of injury to children!

Follow these precautions to prevent the

TV from toppling over and causing injury to children:

• Never place the TV on a surface covered by a cloth or other material that can be pulled away.

• Ensure that no part of the TV hangs over the edge of the surface.

• Never place the TV on tall furniture (such as a bookcase) without anchoring both the furniture and TV to the wall or a suitable support.

• Educate children about the dangers of climbing on furniture to reach the TV.

Risk of swallowing batteries!

• The product/remote control may contain a coin-type battery, which can be swallowed. Keep the battery out of reach of children at all times!

Risk of overheating!

• Never install the TV in a confined space.

Always leave a space of at least 4 inches or 10 cm around the TV for ventilation.

Ensure curtains or other objects never cover the ventilation slots on the TV.

EN 3

Risk of damage to the TV!

• Before you connect the TV to the power outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different.

Risk of injury, fire or power cord damage!

• Never place the TV or any objects on the power cord.

• To easily disconnect the TV power cord from the power outlet, ensure that you have full access to the power cord at all times.

• When you disconnect the power cord, always pull the plug, never the cable.

• Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable.

Risk of hearing damage!

• Avoid using earphones or headphones at high volumes or for prolonged periods of time.

Low temperatures

• If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature matches room temperature before connecting the

TV to the power outlet.

Screen care

• Avoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage.

• Unplug the TV before cleaning.

• Clean the TV and frame with a soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV.

• Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object.

• To avoid deformations and colour fading, wipe off water drops as soon as possible.

Product disposal Guidelines:

For the purpose of recycling to facilitate effective utilization of resources, please return this product to a nearby authorized collection center, registered dismantler, recycler, service center when disposing of this product.

In case of further assistance, you may contact nearest authorized service center.

Or Please see the Company website for further information on collection centers etc.

Visithttp://www.philips.com

OR Standard Call Rates Apply-1860 180 1111, Toll Free Number - 1800 102 2929

( )

Visithttp://www.philips.com

OR Standard Call Rates Apply-1860 180 1111, Toll Free Number - 1800 102 2929

RoH

S

COMPLIANT

4 EN

3 Use your TV

Congratulations on your purchase, and welcome to Philips To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome.

3.1 Name and Function of Control on Set

29PFL5937/V7

A) TV controls and Indicators

4

SOURCE

MENU

CH+

CH-

VOL+

VOL-

STANDBY

1

2

3

1) IR SENSOR

2) LED INDICATOR

3) POWER SWITCH

4) KEY BOARD

B) Connectivity

10

9

8

7

6

AC-INPUT

110-240V~ 50/60Hz

1

VIDEO

AV IN

L R VIDEO

AV OUT

L R

2 3

5

1) AC POWER IN

2) AV IN(YPbPr Audio IN)

3) AV OUT

4) USB

5) HDMI

Note :

6) YPbPr

7) HEADPHONE

8) PC/VGA AUDIO IN

9) VGA IN

10) RF IN

1) Above sketch and connectivity are just for representation actual product may look different as per model selection.

4

EN 5

3.3 Name and Function of Control on Remote

5

6

7

8

9

3

4

10

1

2

17

16

15

14

13

12

11

6 EN

1

2

3

4

5

6

(Standby-On)

• Switches the TV ON or OFF.

The TV is not powered off completely unless it is physically unplugged

Multimedia Control buttons

• Control video or music.

FIND

• Access the Channel Edit.

( Home )

• Access the home menu.

CH - / CH + ( Previous/Next )

• Switch channels or navigate through menu pages, tracks, albums or folders.

SOURCE

• Selects connected devices.

7

8

9

10

11

• Mute or restore audio.

+/-

• Adjust volume.

0-9 Numeric buttons

• Select channels.

SUBTITLE

• Depending on model.

TEXT

• Depending on model.

12 OPTIONS

• Access options for the current activity or selection.

13

• Return to the previous menu or exit a function.

14

OK

• Confirm an entry or selection.

15

( Navigation buttons)

• Navigate through menus and select items. (Also in USB mode).

16

17

ADJUST

• Access the menu to adjust settings.

Color buttons

• Select tasks or options

3.4 Remote control usage

When you use the remote control, hold it close to the TV and point it at the remote control sensor. Make sure that the line-of-sight between the remote control and TV is not blocked by furniture, walls or other objects.

~5m

~30º

EN 7

3.5 Battery Installation

1. Remove the battery compartment door.

2. Install 2 “AAA” or UM-4 (1.5V) batteries or equivalent with the correct polarity

as indicated.

3. Refix the battery compartment door.

8 EN

4 Use more of your TV

4.1 Main Menu

Menus help you to install channels, change picture and sound settings and access other

TV features.

4.2 Manually adjust picture setting

Picture

Sound

Features

Installation

Smart Picture

Contrast

Brightness

Color

Hue

Sharpness

Pixel Plus HD

Format

1 Press

» The menu screen appears.

Picture

Sound

Features

Installation

Dynamic Contrast

Noise Reduction

Flesh tone

Dynamic backlight

High

High

On

High

Watch TV Device List

1 Press .

2 Select [Setup] then press OK

> Select [Picture].

Browse USB Setup

3

2 Select one of the following, then press

OK

• [Watch TV] : If a source other than antenna is selected, switch back to the antenna source

• [Browse USB]: View photos and play music and movies contained in

USB storage devices.

• [Device List] change other source by pressing key.

•

• [Setup] : Access menus to change picture, sound and other settings.

•

•

Select one of the following settings, then

Press to move, and press to adjust.

• [Smart picture] : Access predefined smart picture settings.

• [Contrast] : Adjust the intensity of backlight areas, while the video contents are kept unchanged.

• [Brightness] : Adjust the intensity and details of dark areas.

• [Color] : Adjust color saturation.

[Hue]: Compensate for color variations.

(Available only for NTSC channels).

[Sharpness] : Adjust sharpness in the image.

[Pixel Plus HD] :

To enhance the picture quality

• [Dynamic contrast] : Enhance contrast, you can switch this feature

Low,Middle and High.

• [Noise Reduction]: Filter and reduce noise in an Image, you can switch this feature

Low,Middle and High.

• [Flesh tone]: Make colors more vivid and improve the details in bright colors.

You can switch this feature ON or OFF.

light, you can switch this feature

Low,Middle and High.

• [ Format ] : Select picture format.

EN 9

Picture

Sound

Features

Installation

Color Temp.

Freeze

4.4 Manually adjust sound setting

Picture

Sound

Features

Installation

Smart Sound

Balance

Treble

Bass

AVL

Equalizer

Incredible Surround

•

•

[Color Temp.] : Adjust the color balance

in an image.

[Freeze] picture.

: Select option as ON to freeze the

Note

• Depending on the format of the picture source, some picture settings may not be available.

4.3 Use Smart Picture

Use smart picture to apply pre-defined picture settings.

Smart Picture Vivid

1

2

Press ADJUST.

Select one of the following settings, by

•

•

•

•

[Vivid] : Rich and dynamic settings, ideal for daytime.

[Cinema] : Ideal settings for movies.

[Personal]: Apply your customised picture settings.

[Bright]: Ideal settings for night time.

1

2

3

•

•

•

•

Press .

Select [Setup] then press OK

> Select [Sound].

Select one of the following settings, then

Press to move, and press to adjust.

[Smart Sound] : Access predefined smart sound settings.

[Balance] : Adjust the balance of the right and left speakers.

[Treble] : Adjust the treble level.

[Bass] : Adjust the bass level.

•

•

•

[AVL] : Auto volume leveler automatically reduces sudden volume changes, for example when switching channels.

[Equalizer] : Adjust the equalizer ON various frequencies.

[Incredible Surround ] :

Enable Incredible Surround for stereo

Sources

4.5 Use Smart Sound

Use smart sound to apply pre-defined

Sound settings.

Smart Sound Standard

1

2

Press ADJUST.

Select one of the following settings, by

• [Standard] : Settings that suit most environments and types of audio.

• [Music] : Ideal settings for listening to music.

• [Movie] : Ideal settings for spoken audio, such as news.

• [Personal]: Apply the settings that were customised in the sound menu.

10 EN

4.6 Features Menu

1 Press

2 Select [Setup] OK

> Select [Features]

3 Select one of the following settings then

Press to move, and press to adjust.

4.7 Installation Menu

Picture

OSD Duration

Blueback

Sound Sleep Time

Factory Settings

Features

Installation

1 Press .

2 Select [Setup]

> Select [Installation]

3 Select one of the following settings, then

• [OSD Duration] :This function is used to OSD timeout in step of 15,30,45,60 secs.

Press to move, and press to adjust.

• [Color System] : Change the color system

• [Blueback] :This function is used to ON/OFF

(AUTO/PAL/NTSC) setting if the picture

is not reproduced properly.

the blue screen at no signal condition.

Note: For India color system is Auto or

• [Sleep Time] :This function is used to ON/OFF step of 10,20,30,60,90,120,180,240 mins.

PAL.

• [Sound System]: Change the sound sound system (BG/M/DK/I) setting if sound

• [Factory Settings] :This function is used for

Reset to factory default settings.

is not reproduced properly.

Note: For India sound system is BG.

• [Skip]:This function is used to Skip any program.

Blueback

• [Auto Search] :Select the function TV set will start auto tuning for all available channels.

• [Manual ] searching the channels,select the function from which tuning will start.

[Features in VGA Mode] :

• [Auto Adjust]: This automatically adjust

H & V-position, Phase and Clock for VGA mode.

• [H-Position]: Adjust the horizontal position of image [Only in VGA].

•

•

[Fine Tune]: You can Fine tune the program,

In case poor reception.

[Channel Edit]: You can Delete, Rename,

Move or Skip any programmes.

position of image [Only in VGA].

[Clock]: Adjust the picture if not in sync with TV screen.

[Phase]: Adjust the picture if there is any blurring or shimmer in text.

[Only in VGA].

EN 11

1 55.25MHz ----- On

2 62.25MHz ----- Off

3 69.25MHz ----- Off

4 76.25MHz ----- Off

5 97.25MHz ----- Off

6 112.25MHz ----- Off

7 119.25MHz ----- Off

8 126.25MHz ----- Off

9 147.25MHz ----- Off

10 161.25MHz ----- Off

Rename

1

Program Edit

5 Play photos, music and videos

48.25MHZ

2

3

83.25MHZ

on USB storage devices

105.25MHZ

4 169.25MHZ

175.25MHZ

5

8

9

6

7

203.25MHZ

224.25MHZ

463.25MHZ

545.75MHZ

Delete

Select Delete option by Pressing Red color button,the program will be deleted.

Rename

Move the cursor to the program, Select

Rename option by pressing Green color button to rename the program. Press to choose the character. Press to move the cursor.

Press OK button to Enter ,

Press Menu button to Return the Edit Menu.

5.1 Connect a USB storage device to play photos, music or videos stored on it.

1 Switch on the TV.

2 Connect the USB device to the USB port on the side of your TV.

3 Press

4 Select [Browse USB], then press OK

The USB browser appears.

Move

Move the cursor to the program, Select

Move option by pressing Yellow color button

and press to move the program.

Select program no on which you want move the current program, then press ok key.

Skip

Select Skip option by pressing Blue color button to skip this program.

5.2 View photos

1 In the USB browser, select [Photo], then press OK.

2 Select a photo or a photo album by pressing

OK key,then press to view the photo.

5.3 View a slide show of your photos

Press the following buttons to control play of selected photos.:

4.8 Use the Options menu

Freeze Off

Select photos by pressing OK key :

• to play.

• to pause.

• or to play the previous or next photo.

Incredible Surround Off

5.4 Listen to music

1

2

While you watch TV, press

OPTIONS.

The TV options menu appears for

Freeze and Incredible Surround by pressing options key cyclic.

Select one of the following options,switch to

ON/OFF by .

• [Freeze ]:

1 In the USB browser, select [Music], then press OK.

2 Select a music track or album by pressing

OK key.

•

•

to play.

to pause.

• or to play the previous or next

[ Incredible Surround ]:

Enable Incredible Surround for stereo

Sources

12 EN

5.5 Watch video

1 In the USB browser, select [Movie],then press OK.

Select video files by pressing OK key.

2

3 To control play, press the play buttons:

• to play/pause.

• or to play the previous or next video.

5.6 Text

1 In the USB browser, select [Text], then press OK.

2 Select a Text File, then Press to play.

Text mode menu bar:

Press to select the function icon, press

OK button to confirm the function.

5.9 Disconnect a USB storage device

Caution

• Follow this procedure to avoid damage to your

USB storage device.

1 Press to exit the USB browser.

2 Wait for five seconds, then disconnect the USB storage device.

5.7 Music, Photo, Movie, Text

mode control menu bars

You can select the multimedia functions like play, Pause, FF, FB, Next, Previous.

Stop etc.

To use above functions press OK key while playing files on TV screen.

Picture mode menu bar:

Press to select the function icon, press

OK button to confirm the function.

Music mode menu bar:

Press to select the function icon, press

OK button to confirm the function.

Movie mode menu bar:

Step Forward

Press to select the function icon, press

OK button to confirm the function.

EN 13

6 Troubleshooting

6.3 Picture issues

The TV is on, but there is no picture:

Check that the antenna is properly connected to the TV.

This section describes commonly encountered issues and accompanying solutions.

6.1 General TV issues

The TV does not switch on:

Disconnect the power cable from the power outlet. Wait for one minute then reconnect it.

Check that the power cable is securely connected.

The remote control is not working properly:

Check that the remote control batteries are correctly inserted according to the +/- orientation.

Replace the remote control batteries if they are flat or weak.

Clean the remote control and TV sensor lens.

The standby light on the TV blinks red:

Disconnect the power cable from the power outlet. Wait until the TV cools down before reconnecting the power cable. If the blinking reoccurs, contact Philips Consumer Care.

When turning the TV on/off/to standby, you hear a creaking sound from the TV chassis:

No action is required. The creaking sound is normal expansion and contraction of the TV as it cools down and warms up. This does not impact performance.

6.2 TV channel issues

Previously installed channels do not appear in the channel list:

Check that the correct channel list is selected.

Check that the correct device is selected as the TV source.

There is sound but no picture:

Check that the picture settings are correctly set.

There is poor TV reception from an antenna connection:

Check that the antenna is properly connected to the TV.

Loudspeakers, unearthed audio devices, neon lights, high buildings and other large objects can influence reception quality.

If possible, try to improve the reception quality by changing the antenna direction or moving devices away from the TV.

If reception on only one channel is poor, fine tune this channel.

There is poor picture quality from connected devices:

Check that the devices are connected properly.

Check that the picture settings are correctly set.

The TV did not save your picture settings:

Check that the TV location is set to the home setting. This mode offers you the flexibility to change and save settings.

The picture does not fit the screen; it is too big or too small:

Try using a different picture format.

The picture position is incorrect:

Picture signals from some devices may not fit the screen correctly. Check the signal output of the device.

14 EN

6.4 Sound issues

There is a picture but sound quality is poor:

Note

If no audio signal is detected, the TV automatically switches the audio output off this does not indicate malfunction.

Check that all cables are properly connected.

Check that the volume is not set to 0.

Check that the sound is not muted.

There is a picture but the sound quality is poor:

Check that the sound settings are correctly set.

There is a picture but sound comes from one speaker only:

Verify that sound balance is set to the centre.

6.7 Contact us

If you cannot resolve your problem, refer to the

FAQs for this product at www.philips.com/support. or Contact Customer Service Center.

Warning

Do not attempt to repair the product yourself.

This may cause severe injury, irreparable damage to your product or void your warranty.

Note

Make a note of your TV model and serial number before you contact Philips. These numbers are printed on the back of the TV and on the packaging.

6.5 HDMI connection issues

There are problems with HDMI devices:

If the TV does not recognise the HDMI device and no picture is displayed, try switching the source from one device to another and back again.

If there are intermittent sound disruptions, check that output settings from the HDMI device are correct.

If you use an HDMI-to-DVI adapter or

HDMI-to-DVI cable, check that an additional audio cable is connected to AV IN.

6.6 Computer connection issues

The computer display on the TV is not stable:

Check that your PC uses the supported resolution and refresh rate.

Select the “Auto Adjust” function.

1. Press

2. Select [Setup] >[Features] >

[Auto Adjust].

EN 15

7 Product information

7.3 Remote control

Type: YKF293-001

Batteries: 2 x AAA (LR03 type)

Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.

7.1 Supported display resolutions

Computer formats (HDMI)

Resolution - refresh rate:

720 x 480p - 60Hz

720 x 576p - 50Hz

1280 x 720p - 50Hz,60Hz

1920 x 1080p -50Hz,60Hz

7.4 Multimedia

Supported USB storage device:

(Only FAT 16 or FAT 32 USB storage devices are supported)

Supported storage file formats:

Images : JPEG, BMP, PNG

Audio : MP3,WMA.

Text : TEXT

Video :

Computer formats (VGA)

Resolution - refresh rate:

640 x 480 - 60Hz,72Hz,75Hz

800 x 600 - 56Hz,60Hz,72Hz,75Hz

1024 x768 - 60Hz,70Hz,75Hz

1280 x 1024 - 60Hz

Video Formats

Resolution - refresh rate:

720 x 480i - 60Hz

720 x 480p - 60Hz

720 x 576i - 50Hz

720 x 576p - 50Hz

1280 x 720p - 50Hz, 60Hz

1920 x 1080i - 50Hz, 60Hz

Note

1) 1080p support only for FHD model

7.2 Tuner/Reception/

Transmission

Antenna input: 75ohm coaxial (IEC75)

TV system: PAL, B/G

Video playback: NTSC,PAL

Tuner Bands: UHF, VHF

Note

1) USB file names must not exceed 128 characters.

2) The USB features/functions may vary from file to file depending on relative information present in the file

7.5 Power

Mains power: 110-240V, 50Hz-60Hz

Ambient temperature: 5 to 40 degrees

Celsius

Power consumption

29PFL5937/V7: 40W

16 EN

7.6 Supported TV mounts

To mount the TV, purchase a Philips TV mount or VESA - compatible TV mount.To Prevent damage to cables and connectors,be sure to leave a clearance of at least 2.2 inches or 5.5 cm from the back of the TV.

Warning

Follow all instructions provided with the TV mount. PE Electronics Ltd. bears no responsibility for improper TV mounting that results in accident, injury or damage.

TV screen size (inches)

29PFL5937/V7

Required pitch (mm)

200 x 100

Required mounting bolts

4 x M4

7.7 Product specification

Design and specifications are subject to change without notice.

29PFL5937/V7

With TV stand

Dimension(WxDxH): 666 x 200 x

452 (mm)

Weight: 5.7 kg

Without TV stand

Dimension(WxDxH): 666 x 50 x

413 (mm)

Weight: 5 kg

EN 17

Consumer Guidelines

1.Kindly ensure that the dealer fill out Warranty card correctly.

2.To avail the Warranty please register your product with the Philips-

• Log on to www.Philips.com

OR

• Contact Philips Consumer Care Centre

3.In the unlikely event of a defect developing in the TV set contact the Philips Customer

Care Centre for obtaining warranty service and inform of the defect observed in the

set, the type no. and serial no. of the set.

4.On your lodging a complaint, a trained technician will call on you promptly. In the

event of the technician deciding that set requires attention at the service station;the

technician would arrange to get the set picked up to be delivered to service station

for further attention. “Homecalls” by the technician would however be restricted within the municipal limits of the city/town in which the set has been registered.

Type no.

Serial No.

Purchased By: Name

Date of Purchase

Address:

Tel.No.

Sold by: Name

Address:

Tel.No.

Sold by(User rubber stamp)

Model no.: 29PFL5937/V7

Serial no.:

Contact Customer Service Executive at:

1860 180 1111 (Standard Call Rates Apply)

1800 102 2929 (Toll Free No.)

Regd Office: PE Electronics Ltd,Auto Cars Compound,Adalat Road,Aurangabad,431005.

18 EN

WARRANTY

This TV receiver is covered under From whom the set has been purchased or warranty against any defect arising out through an Authorised Service Center for of faulty or defective material or workman warranty service. However, if the ship for a period of 12 months from the Purchaser has to shift his residence to date of purchase. another town on account of transfer or

other reasons, the warranty benefit will be

Should a defect develop in this set during available at the Authorised Service Center the period of warranty,PE Electronics of that town.

Limited undertakes to get the set repaired free of charge either

The warranty is not valid in case of any of the following events:

The TV set is not used according to instructions given in the ‘Direction for use’

/ ‘User Manual’

Defects are caused by improper or reckless use.

Any repair work carried out by persons other than a Philips dealer or Authorised

Service Center.

Any modification or alteration of any nature made in the electrical circuitry of the set.

This Warranty Card is not completed and signed immediately on delivery of the set by the Philips Dealer.

Fading effects and/or Ghosts (Multiple Image) in picture, if any,arising due to location

/ signal reception.

Defects due to causes beyond control like lightning, abnormal voltage, Acts of God or while in transit to purchaser’s residence.

(Refer Consumer Guidelines for further details)

EN 19