advertisement
User‘s Guide
Dell E2214H
Dell E2314H
Model No.: E2214H / E2314H
Regulatory model: E2214Hb / E2314Hf
NOTE: A NOTE indicates important information that helps you make better use of your monitor.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2013 Dell Inc. All rights reserved.
Information in this document is subject to change without notice.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/ or other countries. ENERGY STAR is a registered trademark of the U.S.
Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
2013 – 10 Rev. A00
Contents
Dell Display Manager User's Guide . . . . . . . . . . . . . . . . 6
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using the Quick Settings Dialog . . . . . . . . . . . . . . . . 6
Setting Basic Display Functions . . . . . . . . . . . . . . . . 7
Assigning Preset Modes to Applications . . . . . . . . . . . 7
Applying Energy-Conservation Features . . . . . . . . . . . 9
About Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package Contents . . . . . . . . . . . . . . . . . . . . . . . 10
Product Features . . . . . . . . . . . . . . . . . . . . . . . . .11
Identifying Parts and Controls . . . . . . . . . . . . . . . . 12
Monitor Specifications . . . . . . . . . . . . . . . . . . . . . 14
Power Management Modes . . . . . . . . . . . . . . . . . . . . . . . 14
Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Plug and Play Capability . . . . . . . . . . . . . . . . . . . . .17
Flat-Panel Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 17
Resolution Specifications . . . . . . . . . . . . . . . . . . . . . . . . 18
Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 18
Preset Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Physical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . 20
Environmental Characteristics . . . . . . . . . . . . . . . . . . . . . 21
LCD Monitor Quality & Pixel Policy . . . . . . . . . . . . . 21
Maintenance Guidelines . . . . . . . . . . . . . . . . . . . 22
Caring for Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . 22
3
Setting Up the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . 23
Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . 23
Connecting Your Monitor . . . . . . . . . . . . . . . . . . . 24
Connecting the blue VGA Cable . . . . . . . . . . . . . . . . . . . . 24
Connecting the white DVI cable . . . . . . . . . . . . . . . . . . . . 24
Organizing Your Cables . . . . . . . . . . . . . . . . . . . . 25
Removing the Monitor Stand . . . . . . . . . . . . . . . . 25
Wall Mounting (Optional) . . . . . . . . . . . . . . . . . . . 26
Operating the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Power On the Monitor . . . . . . . . . . . . . . . . . . . . . 27
Using the Front-Panel Controls . . . . . . . . . . . . . . . 27
Front-Panel Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using the On-Screen Display (OSD) Menu . . . . . . . . . 29
Accessing the Menu System . . . . . . . . . . . . . . . . . . . . . . . 29
OSD Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Setting the Maximum Resolution . . . . . . . . . . . . . . 43
Using the Tilt. . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Built-in Diagnostics. . . . . . . . . . . . . . . . . . . . . . . 46
Common Problems . . . . . . . . . . . . . . . . . . . . . . . 47
Product-Specific Problems . . . . . . . . . . . . . . . . . . 49
Dell Soundbar Problems . . . . . . . . . . . . . . . . . . . . 50
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4
Other Regulatory Information . . . . . . . . . . . . . . . . 53
Contact Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Setting Up Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . 54
Setting the display resolution to 1920 x 1080 (Maximum)54
If you have a Dell desktop or a Dell portable computer with
Internet access . . . . . . . . . . . . . . . . . . . . . . . . . 55
Procedures for setting up dual monitors in Windows Vista ,
Windows 7 or Windows 8 . . . . . . . . . . . . . . . . . . . 56
For Windows Vista®. . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
For Windows® 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
For Windows® 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Setting Display Styles For Multiple Monitor . . . . . . . . . . . . . 62
5
Dell Display Manager User's Guide
Overview
Dell Display Manager is a Windows application used to manage a monitor or a group of monitors. It allows manual adjustment of the displayed image, assignment of automatic settings, energy management, image rotation and other features on select Dell models. Once installed, Dell
Display Manager will run each time the system starts and will place its icon in the notification tray. Information about monitors connected to the system is always available when hovering over the notification tray icon.
Using the Quick Settings Dialog
Clicking Dell Display Manager’s notification tray icon opens the Quick
Settings dialog box. When more than one supported Dell model is connected to the system, a specific target monitor can be selected using the menu provided. The Quick Settings dialog box allows convenient adjustment of the monitor’s Brightness and Contrast levels, Preset Modes can be manually selected or set to Auto Mode, and the screen resolution can be changed.
6 Dell Display Manager User's Guide
The Quick Settings dialog box also provides access to Dell Display
Manager’s advanced user interface which is used to adjust Basic functions, configure Auto Mode and access other features.
Setting Basic Display Functions
A Preset Mode for the selected monitor can be manually applied using the menu on the Basic tab. Alternatively, Auto Mode can be enabled. Auto
Mode causes your preferred Preset Mode to be applied automatically when specific applications are active. An onscreen message momentarily displays the current Preset Mode whenever it changes.
The selected monitor’s Brightness and Contrast can also be directly adjusted from the Basic tab.
Assigning Preset Modes to Applications
The Auto Mode tab allows you to associate a specific Preset Mode with a specific application, and apply it automatically. When Auto
Mode is enabled, Dell Display Manager will automatically switch to the corresponding Preset Mode whenever the associated application is activated. The Preset Mode assigned to a particular application may be the same on each connected monitor, or it can vary from one monitor to the next.
Dell Display Manager User's Guide 7
Dell Display Manager is pre-configured for many popular applications. To add a new application to the assignment list, simply drag the application from the desktop, Windows Start Menu or elsewhere, and drop it onto the current list.
NOTE: Preset Mode assignments targeting batch files, scripts, and loaders, as well as non-executable files such as zip archives or packed files, are not supported and will be ineffective.
8 Dell Display Manager User's Guide
Applying Energy-Conservation Features
On supported Dell models , the PowerNap tab will be available to provide energy conservation options. When the screensaver activates, the monitor’s Brightness can automatically be set to minimum level or the monitor can be put to sleep in order to save additional power.
Dell Display Manager User's Guide 9
About Your Monitor
Package Contents
Your monitor ships with all the components shown below. Ensure that
you have received all the components and Contact Dell if anything is
missing.
NOTE: Some items may be optional and may not ship with your monitor.
Some features or media may not be available in certain countries .
• Monitor
• Stand Riser
• Stand Base
• VESA ™ Screw Cover
• Power Cable (varies with countries)
• VGA Cable
• DVI Cable
• Drivers and Documentation media
• Quick Setup Guide
• Product and Safety Information
Guide
10 About Your Monitor
Product Features
The Dell E2214H / E2314H flat-panel display has an active matrix, Thin-
Film Transistor, Liquid Crystal Display. The monitor’s features include:
• E2214H: 54.6cm (21.5 inches) diagonal viewable image size,
1920 x 1080 resolution, plus full-screen support for lower resolutions.
• E2314H: 58.4 cm (23.0 inches) diagonal viewable image size,
1920 x 1080 resolution, plus full-screen support for lower resolutions.
• LED backlit.
• Tilt adjustment capability.
• Removable pedestal and Video Electronics Standards Association
(VESA) 100 mm mounting holes for flexible mounting solutions.
• Plug and play capability if supported by your system.
• On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
• Software and documentation media which includes an information file
(INF), Image Color Matching File (ICM), and product documentation.
• Dell Display Manager Software
• ENERGY STAR-compliant.
• Security lock slot.
• Asset Management Capability.
• EPEAT Gold compliant.
• CECP (for China) .
• RoHS compliant.
• TCO Certified Displays.
About Your Monitor 11
Identifying Parts and Controls
Front View
1.
Function buttons (For more information, see Operating the Monitor)
2 Power On/Off button (with LED indicator)
Back View
1
3 BZ02
Canada Class B ICES-003/NMB-003.
Consumo de energía: XX.X Wh
Consumo de energía en modo de espera: X.XX Wh
Удельная мощность рабочего режима - X.XXX Вт/см²
Потребляемая мощность изделием в режиме ожидания - X.XX Вт
Потребляемая мощность изделием в выключенном режиме - X.XX Вт
Q40G019N-700-42A
2
3
4
XXXXXXX-XXXXX
KCC-REM-TPV-E2014Hc
신청인/제조자:
TPV Electronics(Fujian) Co., Ltd.
080-854-0066
S/N: CN-12MWY-64180-341-001L
Made in China
Manufactured Date: Apr. 2013
REV A00
Q40G019N-700-43A
DELL
Flat Panel Monitor /Monitor Plano Panel /
液晶顯示器 /液晶显示器/모니터
Model No. /Modelo /型號/型号/모델명: E2014Hc
输入电源 /정격입력: 100-240V 50/60Hz 1.5A
: 交流電壓100-240伏特, 1.5安培, 50/60赫茲
Raheen Business Park Limerick Ireland www.dell.com
Made in China /Fabricado en China /
中國製造 /中国制造/중국에서 만든
X X X X X X - XX
XXXXX N889
Q40G019N-700-44A
5
Label Description
1
2
VESA mounting holes (100 mm)
Regulatory rating label
3
4
Regulatory rating label
Security lock slot
5 Dell soundbar mounting slots
Use
To mount the monitor.
Lists the regulatory approvals.
Lists the regulatory approvals.
Secures monitor with security lock
(security lock not included).
To attach the optional Dell Soundbar.
12 About Your Monitor
Side View
Right Side
Bottom View
Label Description Use
1 AC power connector To connect the monitor power cable.
2 DVI connector
3 VGA connector
To connect your computer to the monitor using a DVI cable.
To connect your computer to the monitor using a VGA cable.
Monitor Specifications
The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor.
Power Management Modes
If you have VESA’s DPM compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. If the computer detects input from keyboard, mouse, or other input devices, the monitor
About Your Monitor 13
automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power-saving feature:
E2214H
VESA Modes
Horizontal
Sync
Normal operation Active
Vertical
Sync
Video
Power
Indicator
Active Active White
Power
Consumption
30 W (Maximum)**
Active-off mode Inactive
Switch off -
Inactive Blank Glowing
white
Off
19 W (Typical)
Less than 0.5 W
Less than 0.5 W *
E2314H
VESA Modes
Horizontal
Sync
Normal operation Active
Vertical
Sync
Video
Power
Indicator
Active Active White
Power
Consumption
30 W (Maximum)**
Active-off mode Inactive
Switch off -
Inactive Blank Glowing
white
Off
22 W (Typical)
Less than 0.5 W
Less than 0.5 W *
The OSD will only function in the normal operation mode. When any button except power button is pressed in Active-off mode, the following messages will be displayed:
Activate the computer and monitor to gain access to the OSD.
NOTE: The Dell E2214H / E2314H monitor is ENERGY STAR®-compliant.
14 About Your Monitor
* Zero-power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
** Maximum power consumption with max luminance and contrast.
Pin Assignments
15-pin D-Sub connector
Pin Number Monitor Side of the 15-pin Side Signal Cable
1 Video-Red
2 Video-Green
8
9
10
11
12
13
14
15
3
4
5
6
7
Video-Blue
GND
Self-test
GND-R
GND-G
GND-B
DDC +5 V
GND-sync
GND
DDC data
H-sync
V-sync
DDC clock
About Your Monitor 15
DVI Connector
Pin Number 24-pin Side of the Connected Signal Cable
1 TMDS RX2
2 TMDS RX2+
21
22
23
24
16
17
18
19
20
11
12
13
8
9
10
14
15
3
4
5
6
7
TMDS Ground
Floating
Floating
DDC Clock
DDC Data
Floating
TMDS RX1
TMDS RX1+
TMDS Ground
Floating
Floating
+5 V power
Self test
Hot Plug Detect
TMDS RX0
TMDS RX0+
TMDS Ground
Floating
Floating
TMDS Ground
TMDS Clock+
TMDS Clock
16 About Your Monitor
Plug and Play Capability
You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer with its Extended Display
Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings.
Most monitor installations are automatic. You can select different settings if required.
Flat-Panel Specifications
Model number Dell E2214H monitor Dell E2314H monitor
Screen type
Panel Type
Active matrix - TFT LCD
TN
Viewable image
Diagonal
Horizontal Active
Area
546.0 mm (21.5 inches)
476.64 mm (18.77 inches)
Vertical Active Area 268.11 mm (10.56 inches)
Active matrix - TFT LCD
TN
584.2 mm (23.0 inches)
509.76 mm (20.07 inches)
286.74 mm (11.29 inches)
Area
Pixel pitch
Viewing angle:
Horizontal
Faceplate coating
Backlight
Response Time
127791.95 mm
0.248 mm
2 (198.08 inch 2 ) 146168.58 mm
170° typical
Vertical 160° typical
Luminance output 250 cd/m² (typical)
Contrast ratio
0.265 mm
170° typical
160° typical
2 (226.56 inch 2
250 cd/m² (typical)
1000 to 1 (typical)
Antiglare with hard-coating
3H
LED light bar system
1000 to 1 (typical)
Antiglare with hard-coating
3H
LED light bar system
5 ms typical (black to white) 5 ms typical (black to white)
)
Color Depth
Color Gamut
16.7 mil colors
84 % (typical) **
16.7 mil colors
83 % (typical) **
** [E2214H] color gamut (typical) is based on CIE1976 (84 %) and CIE1931 (72 %) test standards.
** [E2314H] color gamut (typical) is based on CIE1976 (83 %) and CIE1931 (72 %) test standards.
About Your Monitor 17
18 About Your Monitor
Resolution Specifications
Model number
Scan range
• Horizontal
Dell E2214H/E2314H monitor
30 kHz to 83 kHz (automatic)
• Vertical
Maximum preset resolution
56 Hz to 76 Hz (automatic)
1920 x 1080 at 60 Hz
Electrical Specifications
Model number
Video input signals
Synchronization input signals
AC input voltage / frequency / current
Inrush current
Dell E2214H/E2314H monitor
Analog RGB: 0.7 Volts ± 5 %, 75 ohm input impedance
Digital DVI-D TMDS, 600 mV for each differential line, positive polarity at 50 ohm input impedance
Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC on green)
100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 1.5 A
(typical)
120 V: 30 A (Max.)
240 V: 60 A (Max.)
About Your Monitor 19
Preset Display Modes
The following table lists the preset modes for which Dell guarantees image size and centering:
Display Mode
Horizontal
Frequency
(kHz)
31.5
Vertical
Frequency
(Hz)
70.1
Pixel Clock
(MHz)
28.3
Sync Polarity
(Horizontal/
Vertical)
-/+ VESA, 720 x 400
VESA, 640 x 480
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1152 x 864
VESA, 1280 x 1024
VESA, 1280 x 1024
VESA, 1600 x 900
VESA, 1920 x 1080
31.5
37.5
37.9
46.9
48.4
60.0
67.5
64.0
80.0
55.5
67.5
59.9
75.0
60.3
75.0
60.0
75.0
75.0
60.0
75.0
60.0
60.0
25.2
31.5
40.0
49.5
65.0
78.8
108.0
108.0
135.0
97.8
148.5
-/
-/
+/+
+/+
-/
+/+
+/+
+/+
+/+
+/
+/+
20 About Your Monitor
Physical Characteristics
The following table lists the monitor's physical characteristics:
Model Number Dell E2214H monitor Dell E2314H monitor
Connector type
Signal cable type
D-subminiature, blue connector;
DVI-D: white connector
D-sub: Detachable, Analog,
15-pin.
DVI-D: Detachable, DVI-D,
Solid pins
D-subminiature, blue connector;
DVI-D: white connector
D-sub: Detachable, Analog,
15-pin.
DVI-D: Detachable, DVI-D,
Solid pins
Dimensions: (with stand)
Height 396.7 mm (15.62 inches) 405.4 mm (15.96 inches)
513.2 mm (20.20 inches)
165.5 mm (6.52 inches)
546.2 mm (21.50 inches)
165.5 mm (6.52 inches)
Width
Depth
Dimensions:
(without stand)
Height
Width
Depth
Stand dimensions:
304.7 mm (12.00 inches)
513.2 mm (20.20 inches)
46.3 mm (1.82 inches)
323.4 mm (12.73 inches)
546.2 mm (21.50 inches)
46.5 mm (1.83 inches)
• Height
• Width
172.2 mm (6.78 inches)
180.6 mm (7.11 inches)
165.5 mm (6.52 inches) • Depth
Weight:
Weight with packaging
Weight with stand assembly and cables
5.20 kg (11.44 lb)
3.80 kg (8.36 lb)
172.2 mm (6.78 inches)
180.6 mm (7.11 inches)
165.5 mm (6.52 inches)
5.50 kg (12.10 lb)
4.22 kg (9.28 lb)
About Your Monitor 21
Weight without stand assembly (For wall mount or VESA mount considerations
- no cables)
2.70 kg (5.94 lb)
Weight of stand assembly
0.70 kg (1.54 lb)
3.13 kg (6.89 lb)
0.70 kg (1.54 lb)
Environmental Characteristics
The following table lists the environmental conditions for your monitor:
Model Number Dell E2214H monitor Dell E2314H monitor
Temperature
• Operating
• Non-operating
0 °C to 40 °C (32 °F to 104 °F)
Storage: -20 °C to 60 °C (-4 °F to 140 °F)
Shipping: -20 °C to 60 °C (-4 °F to 140 °F)
Humidity
• Operating
• Non-operating
10 % to 80 % (non-condensing)
Storage: 5 % to 90 % (non-condensing)
Shipping: 5 % to 90 % (non-condensing)
Altitude
• Operating 5,000 m (16,404 ft) max
• Non-operating 12,191 m (40,000 ft) max
Thermal dissipation 102.3 BTU/hour
(maximum)
102.3 BTU/hour
(maximum)
64.8 BTU/hour (typical) 75.1 BTU/hour (typical)
LCD Monitor Quality & Pixel Policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot. When the pixel remains permanently lit, it is known as a
“bright dot.” When the pixel remains black, it is known as a “dark dot.”
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal and within competitive standards. For more
22 About Your Monitor
information, see Dell Support site at: http://www.dell.com/support/monitors.
Maintenance Guidelines
Caring for Your Monitor
CAUTION: Read and follow the safety instructions before cleaning the monitor.
CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:
• To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
• Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.
• If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.
• Handle your monitor with care as a darker-colored monitor may scratch and show white scuff marks more than a lighter-colored monitor.
• To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.
About Your Monitor 23
Setting Up the Monitor
Attaching the Stand
NOTE: The stand base is detached when the monitor is shipped from the factory.
1. Assemble the stand riser to stand base. a. Place the monitor stand base on a stable table top. b. Slide the monitor stand body in the correct direction down onto the stand base until it clicks into place.
2. Attach the stand assembly to the monitor: a. Place the monitor on a soft cloth or cushion near the edge of desk. b. Align the stand assembly bracket to the monitor groove. c. Insert the bracket towards monitor until it locks in place.
24 Setting Up the Monitor
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section,
follow the Safety Instructions.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your computer. Do not use both cables at the same time. Use both the cables only when they are connected to two different computers with appropriate video systems.
Connecting the blue VGA Cable
Connecting the white DVI cable
Note: The graphics are used for the purpose of illustration only.
Appearance on the computer may vary.
Setting Up the Monitor 25
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (See
Connecting Your Monitor for cable attachment), organize all cables as shown above .
Removing the Monitor Stand
After placing the monitor panel on a soft cloth or cushion, complete the following steps to remove the base:
1. Use a long screwdriver to push the release latch located in a hole just above the stand.
2. Once the latch is released, remove the base away from the monitor.
26 Setting Up the Monitor
Wall Mounting (Optional)
figure 1
BZ02
Canada Class B ICES-003/NMB-003.
Consumo de energía en modo de espera: X.XX Wh
Удельная мощность рабочего режима - X.XXX Вт/см²
Q40G019N-700-42A
XXXXXXX-XXXXX
KCC-REM-TPV-E2014Hc
신청인/제조자:
TPV Electronics(Fujian) Co., Ltd.
080-854-0066
S/N: CN-12MWY-64180-341-001L
REV A00
Made in China
Manufactured Date: Apr. 2013
Q40G019N-700-43A
DELL
Flat Panel Monitor /Monitor Plano Panel /
/液晶显示器/모니터
液晶顯示器
Model No. /Modelo /型號/型号/모델명: E2014Hc
输入电源 /정격입력: 100-240V 50/60Hz 1.5A
輸入電源 : 交流電壓100-240伏特, 1.5安培, 50/60赫茲
Raheen Business Park Limerick Ireland www.dell.com
Made in China /Fabricado en China /
中國製造
/中国制造/중국에서 만든
X X X X X X - XX
XXXXX N889
Q40G019N-700-44A figure 2
(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the VESA-compatible base mounting kit.
1. Place the monitor panel on a soft cloth or cushion on a stable flat table.
2. Remove the stand.
3. Remove the VESA Screw Cover (figure 1)
4. Use a screwdriver to remove the four screws securing the plastic cover. (figure 2)
5. Attach the mounting bracket from the wall mounting kit to the
LCD.
6. Mount the LCD on the wall by following the instructions that came with the base mounting kit.
Setting Up the Monitor 27
NOTE: For use only with UL-listed wall-mount bracket with minimum weight/load bearing capacity of 5.53 kg.
28 Setting Up the Monitor
Operating the Monitor
Power On the Monitor
Press the button to turn on the monitor.
Using the Front-Panel Controls
Use the keys on the front of the monitor to adjust the image settings.
Front-Panel Keys
A
B
C
D
Description
Preset modes
Use the Preset modes key to choose from a list of
preset color modes. See Using the OSD Menu.
Brightness /Contrast
Use the Brightness / Contrast key to direct access to the "Brightness" and "Contrast" control menu.
Menu
Use the Menu key to open the on-screen display
(OSD).
Exit
Use the Exit key to exit on-screen display (OSD) from menu and sub-menus.
Operating the Monitor 29
Front-Panel Keys
Front-Panel Keys Description
A
Up
Use the Up key to adjust (increase ranges) items in the OSD menu.
B
Down
Use the Down key to adjust (decrease ranges) items in the
OSD menu.
C Use the OK key to confirm your selection.
D
�
OK
�
Back
Use the Back key to go back to the previous menu.
30 Operating the Monitor
Using the On-Screen Display (OSD) Menu
Accessing the Menu System
NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1. Press the button to open the OSD menu and display the main menu.
Main Menu
NOTE: Auto Adjust is only available when you use the analog (VGA) connector.
2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.
3. To select the highlighted item on the menu press the button again.
4. Press the and buttons to select the desired parameter.
5. Press the button to enter the slide bar and then use the or buttons, according to the indicators on the menu, to make your changes.
6. Select the
� to return to previous menu without accepting current
The table below provides a list of all the OSD menu options and their functions.
Operating the Monitor 31
Icon Menu and Description
Submenus
Energy Use This meter shows the energy level being consumed by the monitor in real time.
Brightness/
Contrast
Use the Brightness and Contrast menu to adjust the
Brightness/Contrast.
Brightness
Contrast
Allows you to adjust the brightness or luminance of the backlight.
Press the key to increase brightness and press the key to decrease brightness (min 0 ~ max 100).
Allows you to adjust the contrast or the degree of difference between darkness and lightness on the monitor screen. Adjust brightness first, and adjust contrast only if you need further adjustment.
Press the key to increase contrast and press the key to decrease contrast (min 0 ~ max 100).
32 Operating the Monitor
Auto Adjust Use this key to activate automatic setup and adjust menu.
The following dialog appears on a black screen as the monitor self-adjusts to the current input:
Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock
(Coarse) and Phase (Fine) controls under Display Settings.
NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.
This option is only available when you are using the analog
(VGA) connector.
Operating the Monitor 33
Input Source Use the Input Source menu to select between different video signals that may be connected to your monitor.
Auto Select
VGA
DVI-D
Color
Settings
Select Auto Select to scan for available input signals.
Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source.
Select DVI-D input when you are using the Digital (DVI) connector. Push to select the DVI input source.
Use the Color Settings menu to adjust the monitor's color settings.
Input Color
Format
Allows you to set the video input mode to:
• RGB: Select this option if your monitor is connected to a computer or DVD player using the
HDMI to DVI adapter.
• YPbPr: Select this option if your DVD player supports only YPbPr output.
34 Operating the Monitor
Preset Modes Allows you to choose from a list of preset color modes.
Hue
• Standard: Loads the monitor's default color settings. This is the default preset mode.
• Multimedia: Loads color settings ideal for multimedia applications.
• Movie: Loads color settings ideal for movies.
• Game: Loads color settings ideal for most gaming applications.
• Text: Loads brightness and sharpness settings ideal for viewing texts.
• Warm: Increases the color temperature. The screen appears warmer with a red/yellow tint.
• Cool: Decreases the color temperature. The screen appears cooler with a blue tint.
• Custom Color: Allows you to manually adjust the color settings. Press the and keys to adjust the Red, Green, and Blue values and create your own preset color mode.
This feature can shift the color of the video image to green or purple. This is used to adjust the desired flesh tone color.
Use or to adjust the hue from ‘0’ to ‘100’.
Press to increase the monochrome appearance of the video image.
Press to increase the colorful appearance of the video image.
NOTE: Saturation adjustment is available only when you select Movie or Game preset mode.
Operating the Monitor 35
Saturation This feature can adjust the color saturation of the video image. Use or to adjust the saturation from ‘0’ to ‘100’.
Press to increase the monochrome appearance of the video image.
Image Enhance
Reset Color
Settings
Press to increase the colorful appearance of the video image.
NOTE: Saturation adjustment is available only when you select Movie or Game preset mode.
Automatically sharpen images, enhance hues, boost color contrast and enhance image clarity.
NOTE: Image Enhance is available only when you select
Standard, Multimedia, Movie, or Game preset mode.
Resets your monitor's color settings to the factory defaults.
36 Operating the Monitor
Display
Settings
Use the Displays Settings menu to adjust the monitor's display settings.
Aspect Ratio
Reset Display
Settings
Adjusts the image ratio as Wide 16:9, 4:3, or 5:4.
NOTE: Wide 16:9 adjustment is not required at maximum preset resolution 1920 x 1080.
Horizontal
Position
Use or the buttons to adjust image left and right.
Minimum is '0' (-). Maximum is '100' (+).
Vertical Position
Use the or buttons to adjust image up and down.
Sharpness
Pixel Clock
Minimum is '0' (-). Maximum is '100' (+).
This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100'.
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. Use or buttons to
Phase adjust for best image quality.
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.
NOTE: Pixel Clock and Phase adjustment are only available for VGA input.
Select this option to restore default display settings.
Operating the Monitor 37
Energy
Settings
Power Button
LED
Reset Energy
Settings
Allows you to set the power LED indicator on or off during active to save energy.
Select this option to restore default Energy Settings.
38 Operating the Monitor
Menu Settings Select this option to adjust the settings of the OSD such as, the languages of the OSD, the amount of time the menu remains on screen, and so on.
Language
Transparency
Timer
Lock
Reset Menu
Settings
Allows you to set the OSD display to one of eight languages: English, Spanish, French, German, Brazilian
Portuguese, Russian, Simplified Chinese, or Japanese.
Allows you to adjust the OSD background from opaque to transparent.
Allows you to set the time for which the OSD remains active after you press a key on the monitor.
Use the and keys to adjust the slider in 1 second increments, from 5 to 60 seconds.
Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. All keys are locked except � key.
NOTE: When the OSD is locked, pressing the menu key takes you directly to the OSD settings menu, with 'OSD
Lock' pre-selected on entry. Press and hold � key for 10 seconds to unlock and allow user access to all applicable settings.
Select this option to restore default menu settings.
Operating the Monitor 39
Other Settings Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen,and so on.on.
DDC/CI DDC/CI (Display Data Channel/Command Interface) allows a software on your computer to adjust the monitor display settings like the brightness, color balance etc.
Enable (Default): Optimizes the performance of your monitor and provides a better customer experience.
Disable: Disables the DDC/CI option and the following message appears on the screen.
40 Operating the Monitor
LCD
Conditioning
This feature will help reduce minor cases of image retention.
If an image appears to be stuck on the monitor, select LCD
Conditioning to help eliminate any image retention. Using the LCD Conditioning feature may take some time. LCD
Conditioning feature cannot remove severe cases of image retention or burn-in.
NOTE: Use LCD Conditioning only when you experience a problem with image retention.
The below warning message appears once user selects
“Enable" LCD Conditioning.
Reset Other
Settings
Factory Reset
Select this option to restore default other settings, such as
DDC/CI.
Resets all OSD settings to the factory preset values.
Operating the Monitor 41
Personalize Selecting this option allows you to set two shortcut keys.
Shortcut Key 1 User can select from "Preset Modes", "Brightness/Contrast",
"Auto Adjust", "Input Source" , "Aspect Ratio" and set as shortcut key.
Shortcut Key 2 User can select from "Preset Modes", "Brightness/Contrast",
"Auto Adjust", "Input Source" , "Aspect Ratio" and set as shortcut key.
Reset
Personaliza tion
Allows you to restore shortcut key to the default setting.
42 Operating the Monitor
OSD Messages
When the monitor does not support a particular resolution mode you will see the following message:
This means that the monitor cannot synchronize with the signal that
it is receiving from the computer. See Monitor Specifications for the
horizontal and vertical frequency ranges addressable by this monitor.
Recommended mode is 1920 x 1080.
You will see the following message before the DDC/CI function is disabled.
Operating the Monitor 43
When the monitor enters the Power Save mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the
If you press any button other than the power button, the following messages will appear depending on the selected input:
If VGA or DVI cable is not connected, a floating dialog box as shown below appears. The monitor will enter Power Save Mode after 5 minutes if left at this state.
44 Operating the Monitor
See Solving Problems for more information.
Setting the Maximum Resolution
Windows Vista® ,Windows® 7 ,Windows® 8:
1. For Windows® 8 only, select the Desktop tile to switch to classic desktop.
2. Right-click on the desktop and click Screen Resolution.
3. Click the dropdown list of the screen resolution and select 1920 x
1080.
4. Click OK.
If you do not see 1920 x 1080 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following procedures:
If you have a Dell desktop or portable computer:
• Go to www.dell.com/support, enter your service tag, and download the latest driver for your graphics card.
If you are using a non-Dell computer (portable or desktop):
• Go to the support site for your computer and download the latest graphic drivers.
• Go to your graphics card website and download the latest graphic drivers.
Operating the Monitor 45
Using the Tilt
Tilt
With the stand assembly, you can tilt the monitor for the most comfortable viewing angle.
NOTE: The stand base is detached when the monitor is shipped from the factory.
46 Operating the Monitor
Troubleshooting
WARNING: Before you begin any of the procedures in this section,
Self-Test
Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white connector) and the Analog (blue connector) cables from the back of computer.
3. Turn on the monitor.
The floating dialog box should appear on-screen (against a black background) if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains white. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through the screen.
4. This box also appears during normal system operation, if the video cable becomes disconnected or damaged. The monitor will enter
Power Save Mode after 5 minutes if left at this state.
5. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning properly.
NOTE: Self-test feature check is not available for S-Video, Composite, and Component video modes.
Troubleshooting 47
Built-in Diagnostics
Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card.
1
2
3
4
5
NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode.
To run the built-in diagnostics:
1. Ensure that the screen is clean (no dust particles on the surface of the screen).
2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self-test mode.
3. Press and hold the Button 1 and Button 4 on the front panel simultaneously for 2 seconds. A gray screen appears.
4. Carefully inspect the screen for abnormalities.
5. Press the Button 4 on the front panel again. The color of the screen changes to red.
6. Inspect the display for any abnormalities.
7. Repeat steps 5 and 6 to inspect the display in green, blue, black, white screens.
The test is complete when the white screen appears. To exit, press the
Button 4 again.
If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly. Check the video card and computer.
48 Troubleshooting
Common Problems
The following table contains general information about common monitor problems you might encounter and the possible solutions.
Common Symptoms What You
No Video/Power LED off
No Video/Power LED on
Poor Focus
Shaky/Jittery Video
Possible Solutions
Experience
No picture
No picture or no brightness
Picture is fuzzy, blurry, or ghosting
Wavy picture or fine movement
• Ensure that the video cable connecting the monitor and the computer is properly connected and secure.
• Verify that the power outlet is functioning properly using any other electrical equipment.
• Ensure that the power button is depressed fully.
• Ensure that the correct input
source is selected via the Input
• Check the “Power LED Button” option under Energy Settings in
OSD Menu .
• Increase brightness & contrast controls via OSD.
• Perform monitor self-test feature check.
• Check for bent or broken pins in the video cable connector.
• Ensure that the correct input
source is selected via the Input
• Run the built-in diagnostics.
• Perform Auto Adjust via OSD.
• Adjust the Phase and Pixel
Clock controls via OSD.
• Eliminate video extension cables.
• Reset the monitor to Factory
Settings.
• Change the video resolution to the correct aspect ratio (16:9).
• Perform Auto Adjust via OSD.
• Adjust the Phase and Pixel
Clock controls via OSD.
• Reset the monitor to Factory
Settings.
• Check environmental factors.
• Relocate the monitor and test in another room.
Troubleshooting 49
Missing Pixels
Stuck-on Pixels LCD screen has bright spots monitors.
• Cycle power on-off.
• Pixel that is permanently off is a natural defect that can occur in
LCD technology.
For more information on Dell
Monitor Quality and Pixel Policy,
Brightness Problems Picture too dim or too bright
Geometric Distortion Screen not centered correctly see Dell Support site at: http://www.dell.com/support/ monitors.
• Reset the monitor to Factory
Settings.
• Auto Adjust via OSD.
• Adjust brightness & contrast controls via OSD.
• Reset the monitor to Factory
Settings.
• Auto Adjust via OSD.
• Adjust brightness & contrast controls via OSD.
Horizontal/Vertical
Lines
LCD screen has spots • Cycle power on-off.
• Pixel that is permanently off is a natural defect that can occur in
LCD technology.
For more information on Dell
Monitor Quality and Pixel Policy, see Dell Support site at: http://www.dell.com/support/
Screen has one or more lines
NOTE: When using ‘DVI-D’, the positioning adjustments are not available.
• Reset the monitor to Factory
Settings.
• Perform Auto Adjust via OSD.
• Adjust Phase and Pixel Clock controls via OSD.
• Perform monitor self-test feature check and determine if these lines are also in self-test mode.
• Check for bent or broken pins in the video cable connector.
NOTE: When using ‘DVI-D’, the Pixel Clock and Phase adjustments are not available.
50 Troubleshooting
Synchronization
Problems
Screen is scrambled or • Reset the monitor to Factory appears torn
Settings.
• Perform Auto Adjust via OSD.
• Adjust Phase and Pixel Clock controls via OSD.
• Perform monitor self-test feature check to determine if the scrambled screen appears in self-test mode.
• Check for bent or broken pins in the video cable connector.
• Restart the computer in the safe mode.
Safety-Related Issues Visible signs of smoke or sparks
Intermittent Problems Monitor malfunctions on & off
• Do not perform any troubleshooting steps.
• Contact Dell immediately.
• Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
• Reset the monitor to Factory
Settings.
• Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode.
Missing Color
Wrong Color
Picture missing color • Perform monitor self-test feature check.
• Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
• Check for bent or broken pins in the video cable connector.
Picture color not good • Change the Color Setting Mode in the Color Settings OSD to
Graphics or Video depending on the application.
• Try different Color Preset
Settings in Color Settings OSD.
Adjust R/G/B value in Color
Settings OSD if the Color
Management is turned off.
• Change the Input Color Format to PC RGB or YPbPr in the
Advance Setting OSD.
Image retention from Faint shadow from the • Use the Power Management a static image left on static image displayed feature to turn off the monitor the monitor for a long period of time appears on the screen at all times when not in use (for
• Alternatively, use a dynamically changing screensaver.
Troubleshooting 51
Product-Specific Problems
Specific Symptoms What You
Screen image is too small
Experience
Image is centered on screen, but does not fill entire viewing area
OSD does not appear on the screen
Cannot adjust the monitor with the buttons on the front panel
No Input Signal when user controls are pressed
The picture does not fill the entire screen
Possible Solutions
• Reset the monitor to Factory
Settings.
• Turn off the monitor, unplug the power cord, plug back, and then turn on the monitor.
No picture, the LED light is white. When you press “up”, “down” or “Menu” key, the message “ No input signal” will appear.
The picture cannot fill the height or width of the screen
• Check the signal source. Ensure the computer is not in the power saving mode by moving the mouse or pressing any key on the keyboard.
• Check whether the signal cable is plugged in properly. Re-plug the signal cable if necessary.
• Reset the computer or video player.
• Due to different video formats
(aspect ratio) of DVDs, the monitor may display in full screen.
• Run the built-in diagnostics.
NOTE: When choosing DVI-D mode, the Auto Adjust function is not available.
Dell Soundbar Problems
Common Symptoms What You
No sound for system where the Soundbar draws power from an
AC adapter
Possible Solutions
Experience
No power to
Soundbar - the power indicator is off
• Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if the power indicator (white LED) on the front of the Soundbar is illuminated.
• Confirm that the power cable from the Soundbar is plugged into the adapter.
52 Troubleshooting
No Sound
Distorted Sound
Distorted Sound
Soundbar has power power indicator is on
Computer’s sound card is used as the audio source
Other audio source is used
• Plug the audio line-in cable into the computer’s audio out jack.
• Set all volume controls to their maximum and ensure that the mute option is not enabled.
• Play some audio content on the computer (example, audio CD, or MP3).
• Turn the Power/Volume knob on the Soundbar clockwise to a higher volume setting.
• Clean and reseat the audio linein plug.
• Test the Soundbar using another audio source (For example: portable CD player,
MP3 player).
• Clear any obstructions between the Soundbar and the user.
• Confirm that the audio line-in plug is completely inserted into the jack of the sound card.
• Set all Windows volume controls to their midpoints.
• Decrease the volume of the audio application.
• Turn the Power/Volume knob on the Soundbar counter clockwise to a lower volume setting.
• Clean and re-seat the audio line-in plug.
• Troubleshoot the computer’s sound card.
• Test the Soundbar using another audio source (For example: portable CD player,
MP3 player).
• Avoid using an audio cable extension or audio jack converter.
• Clear any obstructions between the Soundbar and the user.
• Confirm that the audio line-in plug is completely inserted into the jack of the audio source.
• Decrease the volume of the audio source.
• Turn the Power/Volume knob on the Soundbar counter clockwise to a lower volume setting.
• Clean and reseat the audio linein plug.
Troubleshooting 53
Unbalanced Sound
Output
Low Volume
Sound from only one • Clear any obstructions between side of Soundbar the Soundbar and the user.
• Confirm that the audio line-in plug is completely inserted into the jack of the sound card or audio source.
• Set all Windows audio balance controls (L-R) to their midpoints.
• Clean and reseat the audio linein plug.
• Troubleshoot the computer’s sound card.
• Test the Soundbar using another audio source (For example: portable CD player,
MP3 player).
Volume is too low • Clear any obstructions between the Soundbar and the user.
• Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume setting.
• Set all Windows volume controls to their maximum.
• Increase the volume of the audio application.
• Test the Soundbar using another audio source (For example: portable CD player,
MP3 player)
54 Troubleshooting
Appendix
WARNING: Safety Instructions
WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards.
For information on safety instructions, see the Product Information Guide.
FCC Notices (U.S. Only) and Other Regulatory Information
For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com\regulatory_compliance.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
(2) this device must accept any interference received including interference that may cause undesired operation
Contact Dell
For customers in the United States, call 800-WWW-DELL (800-999
3355).
NOTE:If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or
Dell product catalog.
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area.
To get online monitor support content:
1. Visit www.dell.com/support/monitors
To contact Dell for sales, technical support, or customer service issues:
1. Visit www.dell.com/support.
2. Verify your country or region in the Choose A Country/Region drop-down menu at the top left of the page.
3. Click Contact Us on the top left side of the page.
4. Select the appropriate service or support link based on your need.
5. Choose the method of contacting Dell that is convenient for you.
Appendix 55
Setting Up Your Monitor
Setting the display resolution to 1920 x 1080 (Maximum)
For optimal display performance while using the Microsoft Windows operating systems, set the display resolution to 1920 x 1080 pixels by performing the following steps:
In Windows Vista®, Windows® 7, Windows® 8:
1. For Windows® 8 only, select the Desktop tile to switch to classic desktop.
2. Right-click on the desktop and click Screen Resolution.
3. Click the dropdown list of the screen resolution and select 1920 x
1080.
4. Click OK.
If you do not see 1920 x 1080 as an option, you may need to update your graphics driver. Please choose the scenario below that best describes the computer system you are using, and follow the provided
1:If you have a Dell desktop or a Dell portable computer with Internet access
2:If you have a non Dell desktop, portable computer, or graphics card
56 Setting Up Your Monitor
If you have a Dell desktop or a Dell portable computer with
Internet access
1. Go to http://www.dell.com/support, enter your service tag, and download the latest driver for your graphics
2. After installing the drivers for your graphics adapter, attempt to set the resolution to 1920 x 1080 again.
NOTE: If you are unable to set the resolution to 1920 x 1080, please contact Dell to inquire about a graphics adapter that supports these resolutions.
If you have a non Dell desktop, portable computer, or graphics card
In Windows Vista®, Windows® 7, Windows® 8:
1. For Windows® 8 only, select the Desktop tile to switch to classic desktop.
2. Right-click on the desktop and click Personalization.
3. Click Change Display Settings.
4. Click Advanced Settings.
5. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
6. Please refer to the graphics card provider website for updated driver
(for example, http://www.ATI.com OR http://www.NVIDIA.com ).
7. After installing the drivers for your graphics adapter, attempt to set the resolution to 1920 x 1080 again.
NOTE: If you are unable to set the resolution to 1920 x 1080, please contact the manufacturer of your computer or consider purchasing a graphics adapter that will support the video resolution of 1920 x 1080
.
Setting Up Your Monitor 57
Procedures for setting up dual monitors in Windows Vista® ,
Windows® 7 or Windows® 8
For Windows Vista®
Connect the external monitor(s) to your laptop or desktop using a video cable (VGA, DVI, DP, HDMI etc.) and follow any of the below setup method.
Method 1: Using keyboard shortcut “Win+P”
1. Press the Windows logo key + P on your keyboard.
2. While holding down the Windows logo key, press P to toggle between the display selections.
Method 2: Using the “Personalize” menu
1. Right-click on the desktop and click Personalize.
58 Setting Up Your Monitor
2. Click Display Settings.
3. Click Identify Monitors.
• You may need to restart your system and repeat steps 1 to 3 if the system does not detect the added monitor.
Setting Up Your Monitor 59
For Windows® 7
Connect the external monitor(s) to your laptop or desktop using a video cable (VGA, DVI, DP, HDMI etc.) and follow any of the below setup method.
Method 1: Using keyboard shortcut “Win+P”
1. Press the Windows logo key + P on your keyboard.
2. While holding down the Windows logo key, press P to toggle between the display selections.
Method 2: Using the “Screen Resolution” menu
1. Right-click on the desktop and click Screen resolution.
60 Setting Up Your Monitor
2. Click Multiple displays to choose a display selection. If you do not see the additional monitor listed, click Detect.
• You may need to restart your system and repeat steps 1 to 3 if the system does not detect the added monitor.
Setting Up Your Monitor 61
For Windows® 8
Connect the external monitor(s) to your laptop or desktop using a video cable (VGA, DVI, DP, HDMI etc.) and follow any of the below setup method.
Method 1: Using keyboard shortcut “Win+P”
1. Press the Windows logo key + P on your keyboard.
2. While holding down the Windows logo key, press P to toggle between the display selections.
Method 2: Using the “Screen Resolution” menu
1. From the Start screen, select Desktop tile to switch to the Classic
Windows desktop.
62 Setting Up Your Monitor
2. Right-click on the desktop and click Screen resolution.
3. Click Multiple displays to choose a display selection. If you do not see the additional monitor listed, click Detect.
• You may need to restart your system and repeat steps 1 to 3 if the system does not detect the added monitor.
Setting Up Your Monitor 63
Setting Display Styles For Multiple Monitor
After the external monitor(s) have been set up, users can select the desired display style from Multiple displays menu: Duplicate, Extend,
Show Desktop On.
• Duplicate these displays: Duplicate the same screen on two monitors with the same resolution, chosen based on the monitor with a lower resolution.
For Windows Vista®
[DUPLICATE NOT AVAILABLE]
For Windows® 7
64 Setting Up Your Monitor
For Windows® 8
!II Screen ~utlon
Ch a n ge t h e appeara n ce of you r d i sp l a y
O<toct
I dentify
Otspt ay:
Reso l ution :
1 12· Multiple: Monitors "'
1366 768
O ritnt OJ tion: landscapt
Mu l tip l e d i sp l a ys : Dupl i ca t e tht s t d i sp l ays ""'
1 You must stltd p ly bdore mak i ng a d d i t i ona l changes.
Make thts my mitm display
PrOJtd to a second scrttn ( or press the Windo ws logo key
11 •
P )
Make text and oth~ la r ger or smaller
Wh.t dtsplay settings should I choose:?
OK Apply
Setting Up Your Monitor 65
• Extend these displays: This option is recommended when an external monitor is connected to a laptop, and each monitor can display different screen independently to improve user convenience. The relative position of the screens can be set up here, for example monitor
1 may be set up to be to the left of monitor 2 or vice versa. This depends on the physical position of the LCD monitor in relation to the laptop. The horizontal line displayed on both monitors can be based on the laptop or external monitor. These are all adjustable options, and all a user need do is drag the monitor of the main screen to the extended monitor.
For Windows Vista®
66 Setting Up Your Monitor
For Windows® 7
For Windows® 8
Setting Up Your Monitor 67
• Show desktop only on…: Display the status of a particular monitor.
This option is typically chosen when the laptop is used as a PC so the user can enjoy a large external monitor. Most current laptops support mainstream resolutions. As shown in the figure above, the resolution of the laptop monitor is only 1280 x 800, but after connecting a 27” external LCD monitor, users can immediately improve their visual enjoyment to 1920 x 1080 Full HD quality.
For Windows Vista®
68 Setting Up Your Monitor
For Windows® 7
Change t he appea r ance o f your d i splays
Detect
Identify
Displa y:
Resolut i on :
1 1 .
Mobile PC Display
1024 768
Or i e ntation : landscape
Mul t ipl e d i sp l ays:
•
I
1 na l changes .
~!mmm.l
Connect to a proJector (o r press th e
II key and tap P )
Make text and other items larger or smaller
What display settmgs shou l d I choose?
Advanced sdtings
OK
II
Cancel
II
Apply
Change the appearance of your displays
Detect ldon:ify
D~~la y;
Re:solution:
[ 1.
Mobile PC Display
Urum tallo n: l!!ndscape
Mul t iple d i sp ays:
I desktop only on 2 • J
• n.illcNngH.
Conned: to a projector (er prt.!! the
II ~and
P )
Make tot .:lnd other ntms brgcr or :II"I'Uiler
"A'hllt displ a y settings !ho
u kl: <:Moose:?
Ad11a1ced settings
OK
II
CancE l
Jl
Apply
Setting Up Your Monitor 69
For Windows® 8
1!1 Screen R e solution ffi
't ~ ( ~~arance and Personaliution • Display • Sc:r~ ~lution
Ch ange t h e appearance of yo u r di s pl a y s
OK v TCl I Se:archCOtltrOIPan~
·
=
B J.£1..1
P I
I
( o ] ~ ~
D•spl a y:
Resolution:
2. DEll
U2312H ~
1366 768
Orie nt ation: landscape
Multip l e d i s p i OJys : Sho w dtdctop only on 1
&
You must se l !:c
D upl i cate thes e d i sp l a ys
Extend th ese d i s l a \rs.
• I
~ nal chang es .
Make th•s my m
Show deslrt O~ o;:;-lv o n 2
ProJect to a sttond screen ( or p r ess the Wi ndows logo key ; ; P)
Make teet and other rtems la1ger or smaller
What d•splay sett.Jngs should I choose?
Oete<t
Identify
Advanced sett..ngs
(a nul Apply
1!1 Screen Resolution
00
• [ • (<
A_ppearance and Personaliution • Display •
Scr~
R es olutbn
-
D i s p l ay;
I
Ch a n ge t h e appearanc e of your d i s p l a y s m m o~h="l
Identify
.
2 . DELL U23 1 2HM
Reso l ut ion : 1366 J68
J
L CI 13 j..t3.
P I
Or i e nt at i o n: landsc o
M ulti p l e displays: sno w d esktop on ly o n 2 ., J
&
You must sele<
O u pli c a t ! thes.r: disp l a ys
Extr:nd th es.r: d i spla ys f • nalchang es... dr:sktoc
M.lkettusmym
J.;~ ,_
' '
PrOJect to • sr:cond scrr:en or press th e Windows logo key
:1 ..
P )
M1kt: text •nd otht:r rtems largeor smal l r:r
WNt d•spll y sdtmgs should I choose?
AcN1nced setttngs
OK c .nce
l Ap'ly
70 Setting Up Your Monitor
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Business 58.4 cm (23")
- Full HD 1920 x 1080 pixels 16:9
- 5 ms 250 cd/m² 1000:1
- 22 W
Related manuals
advertisement
Table of contents
- 6 Dell Display Manager User's Guide
- 6 Overview
- 6 Using the Quick Settings Dialog
- 7 Setting Basic Display Functions
- 7 Assigning Preset Modes to Applications
- 9 Applying Energy-Conservation Features
- 10 About Your Monitor
- 10 Package Contents
- 11 Product Features
- 12 Identifying Parts and Controls
- 14 Monitor Specifications
- 14 Power Management Modes
- 15 Pin Assignments
- 17 Plug and Play Capability
- 17 Flat-Panel Specifications
- 18 Resolution Specifications
- 18 Electrical Specifications
- 19 Preset Display Modes
- 20 Physical Characteristics
- 21 Environmental Characteristics
- 21 LCD Monitor Quality & Pixel Policy
- 22 Maintenance Guidelines
- 22 Caring for Your Monitor