- Computers & electronics
- Networking
- Network media converters
- StarTech.com
- ET91000LCOAM
- Instruction manual
StarTech.com OAM Managed Gigabit Ethernet Fiber Media Converter - Multi Mode LC 550m - 802.3ah Compliant Instruction manual
Add to my manuals
StarTech.com ET91000LCOAM Gigabit Ethernet to Multimode LC Fiber Media Converter provides a cost-effective way to extend your network over long distances. It features a durable metal housing, supports 802.3/u/ab/z/ah/1Q standards, and offers advanced features like web-based management and remote monitoring. Ideal for connecting remote offices, surveillance cameras, or other network devices over fiber optic cabling.
advertisement
In-Band OAM Gigabit Ethernet to MM LC Fiber
Media Converter - 550m, Metal Housing
ET91000LCOAM
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 11/13/2013
*actual product may vary from photos
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Instruction Manual
Table of Contents
Product Overview ..................................................................................1
Factory Reset Procedure .......................................................................2
Warranty Information ............................................................................7
Instruction Manual i
Product Overview
Side 1
Side 2
DC Jack
RJ-45
Power
FX
Speed
LC Connector
Default
(Use to recover from lost password or to return all settings to factory default values)
LAN
Speed
LAN
Link
FX
Link
The LAN Speed and FX Speed LEDs use 2 colors to indicate speed. Green indicates Fast
Ethernet (100Mbps), while Yellow indicates Gigabit Ethernet. When the LEDs are off, it indicates a speed of 10Mbps.
Instruction Manual
1
Introduction
Packaging Contents
• 1x Fiber Media Converter
• 1x Universal Power Adapter (NA/UK/EU)
• 1x Instruction Manual
System Requirements
• 1000BASE-T compatible Ethernet network equipment
• RJ45 terminated UTP Cat5e or better Ethernet cable
• Available AC electrical outlet
Factory Reset Procedure
Apply power to the unit and allow approximately 30 seconds to fully boot. Using a pencil or a ball-point pen, press the “DEFAULT” push button located on the face plate and hold it for 6 seconds. The media converter will be restored to its factory default values, which are:
IP: 10.1.1.1
Subnet Mask: 255.255.255.0
Gateway: 10.1.1.254
Username/Password: “admin”
Instruction Manual
2
Installation
1. Connect the fiber optic network cable from a computer/switch/media converter to the LC connector on the media converter.
NOTE: When connecting the fiber cable, make sure to connect the Tx (transmit) terminal on one end, with the Rx (receive) terminal on the other end.
2. Connect a UTP Ethernet cable, from a computer/switch to the RJ45 jack on the media converter.
3. Connect the power adapter to the media converter.
The following example illustrates the connection scheme when connecting from a
1000BASE-T Ethernet port of a hub/switch to a 1000BASE-SX/LX port of another hub/ switch. Through the fiber media converter:
The following example illustrates the connection scheme when connecting from a
1000BASE-T Ethernet port on a hub/switch to a 1000BASE-T Ethernet Network Interface
Card (NIC) in a computer through the fiber media converter:
Instruction Manual
3
Installation into ETCHS2U Chassis
The ETCHS2U chassis supports the full line of StarTech.com ET series 2 media converters, which can be installed in a mixed fashion to suit your environment. The cards are designed to be hot-swappable, meaning the chassis need not be powered off in order to remove or insert a card.
1. If the chassis slot was previously unused, loosen the screw at the top of the slot to remove the cover plate
2. Align the card with the desired slot of the chassis and gently slide the card into the groove to seat the power connection
3. Re-tighten the captive screw to hold the card in place
Operation
Web Login Page
The media converter can be configured via a Web Page, accessible through any web browser by using its IP address (Default IP: 10.1.1.1)
Enter the username and password (default username and password is “admin”) and click “Login”.
Instruction Manual
4
The configuration webpage will appear with the following options down the left side:
For full operating instructions, please visit http://www.startech.com/ET91000LCOAM
Instruction Manual
5
Specifications
Supported Standards
Connectors
LED Indicator(s)
Compatible Fiber Mode
Optical Wavelength
Maximum Distance
Duplex Modes
Power Adapter
Power Consumption
Enclosure Material
Operating Temperature
Storage Temperature
Humidity
Dimensions
Weight
IEEE 802.3, 802.3u, 802.3ab, 802.3z,
802.3ah, 802.1Q
1x RJ45 Female
1x LC Fiber Female
1x DC Power
Power, FX-Link, LAN Speed, LAN Link
Multimode
850nm
550m
Full Duplex on Fiber
12V DC, 1A
<5W
Metal
0°C to 60°C (32°F to 140°F)
-10°C to 70°C (14°F to 158°F)
10~90% non-condensing
155 x 87 x 24 mm
620 g
Instruction Manual
6
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Instruction Manual
7
Instruction Manual
8
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Wired
- 1250 Mbit/s 550 m 850 nm
- Ethernet LAN (RJ-45) ports: 1 DC-in jack
- Multi-mode Fiber ports quantity: 1 LC
- Black