Cisco Spare 160-GB Cold Swap SATA Drive for MCS 7816-H3

Data Sheet
Cisco MCS 7816-H3
®
Cisco Unified Communications is a comprehensive IP communications system of voice,
video, data, and mobility products and applications. It enables more effective, more
secure, more personal communications that directly affect both sales and profitability. It
brings people together by enabling a new way of communicating—where your business
moves with you, security is everywhere, and information is always available...whenever
and wherever it is needed. Cisco Unified Communications is part of an integrated solution
that includes network infrastructure, security, mobility, network management products,
lifecycle services, flexible deployment and outsourced management options, end-user
and partner financing packages, and third-party communications applications.
®
The Cisco MCS 7816-H3 Media Convergence Server is an entry-level server platform used for
Cisco Unified Communications solutions. An integral part of a complete, scalable architecture for a
new generation of high-quality IP voice solutions that run on enterprise data networks, the Cisco
MCS 7816-H3 is an easily deployed, cost-effective solution that delivers the high performance and
availability demanded by today’s enterprise networks. At only 1 rack unit (1RU) high, the Cisco
MCS 7816-H3 offers tremendous power in a low-profile chassis that minimizes rack space and
offers the following features:
●
Intel Celeron D 352 3.2-GHz processor with an 533-MHz front side bus (FSB) and 512 KB
of Layer 2 cache
●
2-GB PC2-5300 double-data-rate 2 (DDR2) Error Checking and Correcting (ECC) memory
●
160-GB cold-swap serial advanced technology attachment (SATA) hard disk drive
●
Dual-port Gigabit Ethernet controller (embedded)
●
Quick-deployment third-party rail kit
Supported Cisco Applications
●
Cisco Unified Communications Manager 4.3
●
Cisco Unified Contact Center Express 4.X
●
Cisco Unified Contact Center Express 5.X
●
Cisco Unified IP Interactive Voice Response (IVR) 4.X
●
Cisco Unified IP IVR 5.X
Key Features and Benefits
Performance
The Cisco MCS 7816-H3 is a robust, highly available server platform designed to support today’s
unified communications applications. It uses a single Intel Celeron D 352, 3.2-GHz processor with
a 533-MHz FSB.
Serviceability
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 5
Data Sheet
Serviceable SATA Disk Drives
The Cisco MCS 7816-H3 is configured with one 160-GB SATA “cold-pluggable” disk drive, which is
accessible to the end user through openings in the front bezel of the server. If a drive fails, the
user can schedule server downtime, power down the server, and replace the failed SATA drive by
simply removing it (each drive is equipped with a front latch that positively mates the drive to the
server) and replacing it with an unconfigured spare drive.
DAT Tape Drive Support
The Cisco MCS 7816-H3 can support a 36-/72-GB universal-serial-bus (USB) external Digital
Audio Tape (DAT) drive (part number DAT-USB-EXT-72=) or an optional 36-/72-GB USB rackmount DAT drive (part number DAT-USB-RM-72=). This tape drive connects through one of the
USB 2.0 ports provided by the Cisco MCS 7816-H3 server.
Product Specifications
Table 1.
Product Specifications
Processor (CPU)
Intel Celeron D 352
Processor internal clock speed
3.2 GHz
Level 2 cache
512 KB
Maximum processors
1
Processors installed
1
Basic input/output system (BIOS) type
Flash
Table 2.
Memory Specifications
Memory maximum
8 GB
Memory bus clock
667 MHz
Memory technology
PC2-5300 667-MHz DDR2 synchronous dynamic RAM (SDRAM)
Total RAM slots
4
Memory installed
2 GB (two 1-GB dual in-line memory modules [DIMMs])
Table 3.
RAID Controller Specifications
Controller model
None
Interface
Cache
Battery-backed write cache
RAID levels supported
Table 4.
Hard Disk Specifications
Cold-swappable bays
2
Hard disk interface type
SATA
Hard disk installed
One 160 GB
Hard disk (rpm)
7200
Hard disk average seek time
9 ms
Data transfer rate (burst)
150 MB per second
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 5
Data Sheet
Table 5.
Network Interface Specifications
Ethernet network interface card (NIC)
Dual onboard 10/100/1000
Ethernet connectors
Two RJ-45 connectors on rear of server
10BASET cable support
EIA Category 3, 4, or 5 unshielded twisted-pair (UTP) (2 or 4 pair) up to 328 ft
(100m)
100BASETX cable support
EIA Category 5 UTP (2 pair) up to 328 ft (100m)
1000BASET cable support
EIA Category 6 UTP (recommended), 5E UTP, 5 UTP (2 pair) up to 328 ft
(100m)
Table 6.
Interface Port Specifications
Serial ports
1
Parallel ports
0
USB 2.0 ports
4 (1 front, 1 internal, 2 rear)
Keyboard ports
1
Mouse ports
1
Audio ports
None
Video Graphics Array (VGA) ports
1
System management ports
Integrated Lights Out (iLO) remote
Table 7.
Security Capabilities
● Power-on password
● Keyboard password
● USB port control
● Administrator’s password
● Ability to use selectable boot sequence to prevent unauthorized installation of software or removal of data from the diskette
drive
Table 8.
Standards Compliance
● ACPI 2.0
● PCI 3.0 compliant
● PXE support
● WOL support
● USB 2.0
Table 9.
Expansion Options and Interfaces
Expansion Options
8x PCI-Express full height, three-quarter length
1
8x PCI-Express low profile, half length
1
Table 10.
System Unit Specifications
Dimensions (H x W x D)
1.70 x 16.78 x 24.0 in.
43.2 x 426.2 x 609.6 mm
Weight (maximum)
27 lb
12.27 kg
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 5
Data Sheet
Input requirements
(per power supply)
Rated line voltage
100–120 VAC and 220–240 VAC
Rated input current
6A (100 - 120 VAC)
3A (220 - 240 VAC)
Rated input frequency
47 – 63 Hz
BTU rating (maximum)
BTU/hr
1710
Power supply output power
Rated steady-state power
420W
Temperature Range
Operating
50° to 95° F (10° to 35° C)
Non-operating
-22 to 140°F (-30 to 60°C)
Shipment
-22 to 140°F (-30 to 60°C)
Relative humidity (RH;
non-condensing)
Operating
10% to 90%
Acoustic noise
Operating minimum (random seeks to fixed disks)
L WAd (BELS) 6.3
Table 11.
Equipment Approvals and Safety
● FCC—Verified to comply with Part 15 of the FCC Rules, Class A
● CISPR 22 Class A
● EN 55022 (1998) + A1 + A2 Class B
● EN 55024 (1998) + A1 + A2
● IEC 61000-3-2 (2000) / EN 61000-3-2 (2000)
● IEC EN 61000-3-3 (1995) + A1 (2001) / EN 61000-3-3 (1995) + A1 (2001)
● KN 22 Class B (MIC Notice 2001-115) MIC certification
● KN 24 (MIC Notice 2001-116) MIC certification
● CNS 13438 (BSMI certification)
● GB 9254 Class B (CCC certification)
● VCCI Class B (VCCI certification)
● CSA C22.2 No. 60950-1-03 Information Technology Equipment—Safety—Part 1: General Requirements
● UL 60950-1 Information Technology Equipment—Safety- Part 1: General Requirements
● IEC 60950-1 Information Technology Equipment—Safety- Part 1: General Requirements + CB report covering national
deviations for intended markets.
● ACA AS/ACIF S004:2001
● CCC—China Certificate for China Compulsory Product Certification
● EK1-ITB2000 (2006)
● DIN EN ISO 12100-2 (2004)
● DIN EN ISO 7779 (2001)
● EN 60951-1 (2001) + A11 (2004)
● CE Mark (Low Voltage Directive 73/23/EEC, EMC Directive 89/336/EEC)
● WEEE
Table 12.
Ordering Information
Product Name
Part Number
Cisco MCS 7816-H3 for Cisco Unified Communications Manager 4.3
MCS-7816-H3-IPC1
Cisco MCS 7816-H3 for Cisco Unified Contact Center Express 4.x
MCS-7816-H3-CCX1
Cisco MCS 7816-H3 for Cisco Unified Contact Center Express 5.x
MCS-7816-H3-CCX1
Cisco MCS 7816-H3 for Cisco Unified IP IVR 4.x
MCS-7816-H3-CCX1
Cisco MCS 7816-H3 for Cisco Unified IP IVR 5.x
MCS-7816-H3-CCX1
Spare 1024-MB SDRAM DIMM for Cisco MCS 7816-H3
MEM-7816-H3-1GB=
Spare 160-GB cold swap SATA drive for Cisco MCS 7816-H3
HDD-7816-H3-160=
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 5
Data Sheet
Identifying CPU Speed of Server
As the Cisco MCS 7816-H3 matures, the processor speeds will be changed as Intel replaces
slower processors. The following table provides the Cisco manufacturing part number that will be
shown on the chassis to help identify any processor speed of any individual server.
Table 13.
Manufacturing Part Numbers by Processor Speed
Processor
Manufacturing Part Number Located on Server
Introduction
Intel Celeron D 352, 3.2 GHz
74-5013-01
Initial production of the servers with the
following part numbers:
MCS-7816-H3-CCE1
MCS-7816-H3-CCX1
MCS-7816-H3-IPC1
Warranty Information
Cisco offers a 1-year limited hardware warranty on Cisco Media Convergence Servers. For terms
and conditions of this warranty, refer to
http://www.cisco.com/univercd/cc/td/doc/es_inpck/1y1cen__.htm.
Cisco Unified Communications Services and Support
Using the Cisco Lifecycle Services approach, Cisco and its partners offer a broad portfolio of endto-end services to support the Cisco Unified Communications system. These services are based
on proven methodologies for deploying, operating, and optimizing IP communications solutions.
Initial planning and design services, for example, can help you meet aggressive deployment
schedules and minimize network disruption during implementation. Operate services reduce the
risk of communications downtime with expert technical support, and optimize services enhance
solution performance for operational excellence. Cisco and its partners offer a system-level service
and support approach that can help you create and maintain a resilient, converged network that
meets your business needs.
Printed in USA
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
C78-394094-00 03/07
Page 5 of 5