Technical Specifications

TELEHOOK

12-30 Multi

TM

General Features

Maximum Load: 18kg (39lbs)

Display Compatibility: Telehook 12-30 Multi is compatible with most LCD and Plasma Flat Panel Displays between

12” (30cm) and 30” (76cm) that use the VESA international mounting standard.

VESA Display Mounting Plates: Telehook 12-30 Multi comes with two separate VESA compliant mounting plates. These

Plates accomodate the following mounting hole patterns: - 75mm x 75mm (3” x 3”),

100mm x 100mm (4” x 4”) & 200mm x 100mm (8” x 4”)

Product Configurations: Telehook 12-30 Multi is able to be assembled into three different configurations to suit a wide range of applications. These include an Articulated Arm configuration, a Swing Arm configuration and a Wall Mount configuration. (Each configuration is able to use either of the two VESA Display Mounting Plates)

Cable Management: Each unit includes 3 Push-In Clips for cable management.

Colour: Silver

Fasteners: All fasteners included

Warranty: 5 year limited

Mounting Options

• The Wall Bracket can be installed either horizontally or vertically depending on your application

• The Wall Bracket can be mounted to either;

- Timber Stud Wall

- Masonry Wall

• Coach Screws and Nylon Anchor Plugs are included with the product

Wall Bracket

(

7mm

1 /

4

”)

65mm (2 9 /

16

”)

42mm

(1 5 /

8

”)

20mm

( 13 /

16

”)

133mm

(5 1 /4”)

152mm

(6”)

VESA Display Mounting Plates

100mm (4”)

75mm (3”)

100mm

(4”)

75mm

(3”)

(

5mm

3 /

16

”)

100mm

(4”) 6mm

( 1 /

4

”)

100mm (4”)

200mm (8”)

Overall Dimensions

Articulated Arm

61mm

(2 3 /

8

”)

180°

464mm (18 1 /

4

”)

172mm (6 3 /

4

”)

360°

231mm (9 1 /

8

”)

180°

+/-60° Tilt

157mm

(6 3 / 16

”)

Display Horizontal

Adjustment +/-8°

Swing Arm

180°

295mm (11 5 /

8

”)

200mm (8”)

180°

71mm

(2 13 / 16

”)

28mm

(1 1 /

8

”)

89mm

(3 1 /

2

”)

Wall Mount

Max 20°

44mm

(1 3 /

4

”)

28mm

(1 1 /

8

”)

89mm

(3 1 /

2

”)

As TFT Manufacturers are constantly releasing new monitor models, Atdec does not accept responsibility if the VESA mounting does not comply with the international standards.

Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 01.08.06

c