Gamber-Johnson 7170-0136 mounting kit Datasheet

4

3

2

5

Vehicle Solution Package:

Dodge Ram 1500-5500 (2002-2013)

Sterling Bullet 4500-5500 (2008)

Pedestal System

Item No. 7170-0136

6

1

Must order package as is. There are no substitutions.

3001 Borham Ave, Stevens Point, WI 54481

Toll Free: 800-456-6868 Fax: 800-934-3577

Email: [email protected]

Website: www.gamberjohnson.com

Solution Components:

1. Vehicle Base

(Item No. 7160-0182)

Vehicle Base is a no-drill solution and attaches to the passenger side seat studs. Designed using heavy gauge steel for long-term durability.

2. Off set Universal Mounting Step

(Item No. DS-STEP)

The Off set Universal Mounting Step moves the mounting system away from passenger leg space towards the driver.

3. Lower Tube

(Item No. DS-LOWER-7)

The Lower Tube provides vertical clearance over the center console or the seat.

4. Upper Pole

(Item No. 7160-0177)

Center Upper Pole allows for closer mounting to the dash and less stress on the vehicle mounting equipment as weight is centered on the pole. Wrench is needed for loosening, tightening or height adjustment.

5. Locking Swing Arm

(Item No. 7160-0341)

Locking Swing Arm can rotate around

360° with locking points every 15°.

Motion Attachment has tilt capabilities up to 90° forward/30° back and can be swiveled up to 360°.

6. Support Brace

(Item No. 7160-0230)

Support Brace provides additional mount system support in rugged driving conditions and reduces mounting system vibration.

This document, including images, may not be reproduced partly or fully without the expressed written consent of Gamber-Johnson’s

Marketing Department. © Copyright 2013 Gamber-Johnson, LLC