Gamber-Johnson 7170-0148 mounting kit Datasheet

Vehicle Solution Package:

Ford Utility Police Interceptor (2012-2013)

Pedestal System

3

2

4

5

1

Item No. 7170-0148

Must order package as is. There are no substitutions.

3001 Borham Ave, Stevens Point, WI 54481

Toll Free: 800-456-6868 Fax: 800-934-3577

Email: [email protected]

Website: www.gamberjohnson.com

Solution Components:

1. Vehicle Base

(Item No. 7160-0350)

Vehicle Base is a no-drill solution and attaches to the passenger side seat studs. Designed using heavy gauge steel for long-term durability.

2. Lower Tube

(Item No. DS-LOWER-9)

The Lower Tube provides vertical clearance over the center console or the seat.

3. Upper Pole

(Item No. 7160-0178)

Center Upper Pole allows for closer mounting to the dash and less stress on the vehicle mounting equipment as gravity is centered on the pole.

Wrench is needed for loosening, tightening or height adjustment.

4. 9” Locking Slide Arm - Mongoose

(Item No. 7160-0220)

Locking Slide Arm can rotate around

360° with locking points every 15°.

Slide Arm can extend out from 9” to 13” from center pole and locks automatically in the retracted 9” position. Motion Attachment has tilt capabilities up to 90° forward/30° back and can be swiveled up to 360°.

5. Support Brace

(Item No. 7160-0230)

Support Brace provides additional mount system support in rugged driving conditions and increases mounting system rigidity.

This document, including images, may not be reproduced partly or fully without the expressed written consent of Gamber-Johnson’s

Marketing Department. © Copyright 2013 Gamber-Johnson, LLC