advertisement
ML-758 Parts Manual
Phase 7 / Non-Coin / Dual Timer with F.S.S. Options
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
www.amdry.com
ADC Part No. 450566- 3
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________________________________
ML-758
RESELLER’S NAME _________________________________________________________________________________
Serial Number(s) _____________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Table of Contents
Phase 7 Non-Coin Microprocessor Control Door Assembly
For Models Mfd. as of July 10, 2002
Illus. No.
1
Part No.
883576
2
3
4
7
8
5
6
9
150321
117604
150317
150318
102502
154011
102603
102601
––––––*
* Contact reseller for logo.
4
Qty.
1
1
1
1
2
1
2
1
2
4
Description
White Non-Coin Control Door
(includes illus. nos. 1 and 3)
#10-32 x 1/2” Phillips Machine Screw
Noise Suppression Tape (sold by the foot)
#10-16 x 3/4” TORX PLUS ®
TORX PLUS ® Bit 1/4” (for removal of TORX ® head screw)
Control Door Support Rod
#10-32 Multi-Thread U-Nut
Control Door Rod Support Latch
Control Door Rod Retainer Clip
Logo ONLY
American Dryer Corporation 450566- 3
Dual Timer Non-Coin Control Door Assembly
For Models Mfd. as of July 10, 2002
Illus. No.
1
Part No.
883616
2
3
4
7
8
5
6
9
150321
117604
150317
150318
102502
154011
102603
102601
––––––*
* Contact reseller for logo.
450566- 3
Qty.
1
1
1
1
2
1
2
1
2
4
Description
White Non-Coin Control Door
(includes illus. nos. 1 and 3)
#10-32 x 1/2” Phillips Machine Screw
Noise Suppression Tape (sold by the foot)
#10-16 x 3/4” TORX PLUS ®
TORX PLUS ® Bit 1/4” (for removal of TORX ® head screw)
Control Door Support Rod
#10-32 Multi-Thread U-Nut
Control Door Rod Support Latch
Control Door Rod Retainer Clip
Logo ONLY www.amdry.com
5
Phase 7 Non-Coin Microprocessor Control Door Assembly
For Models Mfd. prior to July 10, 2002
Illus. No.
1
2
3
4
5
6
Part No.
824254
117604
150314
150318
154011
112366
Qty.
4
1
1
2
4
1
Description
Phase 7 Control Door without Hinge
Noise Suppression Tape (sold by the foot)
#10-32 x 1/2” TORX ® Screw
TORX PLUS ® Bit 1/4” (for removal of TORX ® head screw)
#10-32 Multi-Thread U-Nut
Milnor Logo
American Dryer Corporation 450566- 3
Dual Timer Control Door Assembly
For Models Mfd. prior to July 10, 2002
Illus. No.
1
2
Part No.
––––––*
883733
5
6
3
4
7
8
117604
150309
102603
102601
102502
882541
* Contact reseller for logo.
450566- 3
Qty.
1
1
1
1
4
4
1
2
Description
Logo ONLY
White Control Door Assembly
(includes illus. nos. 2, 3, and 8)
Noise Suppression Tape (sold by the foot)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Control Door Rod Support Catch
Control Door Rod Retainer Clip
Control Door Support Rod
Spring Turn Latch (2-piece) www.amdry.com
7
Phase 7 Non-Coin Microprocessor Control Panel Assembly
Illus. No.
1
2
3
4
5
6
7
Part No.
112577
850984
887004
887001
887024
150005
153010
136097
136016
8
1
1
2
2
Qty.
Description
1
1
1
Phase 7 Non-Coin Keypad
Phase 7 Non-Coin Microprocessor Controller (computer) Panel ONLY
Phase 7.2.2 Board with Fire Suppression System and H
2
O (pressure) Switch
Phase 7.2.2 Board with Fire Suppression System and no H
2
O (pressure) Switch
Phase 7.2.2 Board without Fire Suppression System
#6-32 x 3/4” Phillips Round Head Machine Screw
#6 Star Washer
500 mA Fuse
5-Amp Fuse
American Dryer Corporation 450566- 3
Dual Timer “Tap Touch” Controls
Qty.
6
1
3
1
1
1
1
1
1
1
4
1
—
2
3
2
Description
15 Minute Timer – 24 VAC
60 Minute Timer – 24 VAC
Red Pilot Light – 24 VAC
“Tap Touch” Switch
Relay SPST 24v
30-Position Terminal Block
#6-32 Pal Nut
Dual Timer Panel Complete
(includes illus. nos. 1 through 15)
Dual Timer Panel ONLY
#6 Star Washer
#6-32 Hex Nut
#10-24 x 1/2” Phillips Pan Head Machine Screw
#8-32 x 1/2” Phillips Round Head Machine Screw
Dual Timer Panel Overlay
Pure Touch Knob with Red Pointer
Pure Touch Knob with Blue Pointer www.amdry.com
9
Phase 7 Non-Coin Microprocessor Control Box Assembly
Illus. No.
Part No.
5
6
7
3
4
1
2
* As needed.
122681
122676
122646
122683
122640
122706
122669
10
Qty.
1
*
*
1
1
1
1
Description
10-Pin Connector
8-Pin Connector
2-Pin Connector
6-Pin Connector
9-Pin Connector
#20-16 Socket
Female Crimp Terminal
American Dryer Corporation 450566- 3
Dual Timer Control Box Assembly
Illus. No.
1
2
3
4
450566- 3
Part No.
122641
122706
122801
150301
884252
Qty.
1
15
1
2
1
Description
15-Pin Connector
Socket Terminal
Pin / Socket Extraction Tool
#8-18 x 7/16” Phillips Pan Head TEK Screw
Reversing Timer 24 Volt (for reversing dual timer models Only) www.amdry.com
11
37-1/4” Main Door Assembly
Illus. No.
1
2
3
4
5
6
7
8
Part No.
835128
881685
314729*
102357
170731
170830
102221
170731
170730
152014
150683
801600
835003
881689
185522
Qty.
1
1
1
6
1
1
6
1
1
1
1
1
1
1
2
Description
Main Door Hinge
(for models mfd. as of February 18, 2005)
Main Door Hinge
(for models mfd. prior to February 18, 2005)
Main Door Handle
Door Gasket
Black Adhesive (10.3 oz. cartridge)
White Adhesive (10.3 oz. cartridge)
Door Glass
Black Adhesive (10.3 oz. cartridge)
White Adhesive (10.3 oz. cartridge)
1/4-20 Free Spin Wash Nut
1/4-20 x 5/8” Carriage Bolt
Main Door Assembly Complete
(for models mfd. as of September 11, 2006)
Main Door Assembly Complete
(for models mfd. between February 18, 2005 and September 11, 2006)
Main Door Assembly Complete
(for models mfd. prior to February 18, 2005)
Main Door Magnet Bracket
(for models mfd. as of September 11, 2006)
* Specify color when ordering.
12 American Dryer Corporation 450566- 3
Main Door Switch Assembly
Illus. No.
3
4
1
2
5
6
7
8
9
10
450566- 3
Part No.
150006
152013
153010
137005
150445
882866
881687
883338
881702
150301
881151
881441
881152
881440
153031
1
2
1
Qty.
1
1
4
1
2
1
2
2
1
1
1
1
Description
#6-32 x 7/8” Phillips Pan Head Machine Screw
#6-32 Hex Nut
#6 Star Washer
Single-Pole Door Switch
1/4-20 x 3/4” Cap Screw
Main Door Switch Housing (black)
Main Door Switch Housing (white)
Main Door Switch with Housing Assembly (black)
(includes illus. nos. 1 through 4 and 6)
Main Door Switch with Housing Assembly (white)
(includes illus. nos. 1 through 4 and 6)
#8-18 x 7/16” Phillips Pan Head TEK Screw
Bottom Hinge Block (black)
(includes illus. nos. 5, 8, and 10)
Bottom Hinge Block (white)
(includes illus. nos. 5, 8, and 10)
Top Hinge Block (black)
(includes illus. nos. 5 and 9)
Top Hinge Block (white)
(includes illus. nos. 5 and 9)
Nylon Washer www.amdry.com
13
Front Panel Assembly
Illus. No.
1*
Part No.
801604
883703
4
5
2
3
150313
150318
––––––
––––––
881987
6
7
8
154215
102004
152223
* Specify color when ordering.
14
1
1
11
1
1
2
2
2
Qty.
1
1
Description
Front Panel Assembly
(for models mfd. as of September 11, 2006)
(includes illus. nos. 1, 7, and 8)
Front Panel Assembly
(for models mfd. prior to September 11, 2006)
(includes illus. nos. 1, 5, and 6)
#10-16 x 1/2” TORX PLUS ®
25 IP TORX PLUS ® Bit 1/4 Hex (for removal of TORX ® head screw)
Main Door Hinge Block Assembly
(refer to Main Door Switch Assembly on page 13)
Lint Drawer Switch
(refer to Lint Drawer / Lint Drawer Switch Assembly on page 15)
Friction Door Latch Kit
(includes illus. nos. 5 and 6)
5/32” Pop Rivet
0.750 Round Door Magnet
1/2” TORX ® Head Screw
American Dryer Corporation 450566- 3
Lint Drawer / Lint Drawer Switch Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
Part No.
884055
884056
884057
884149
884150
884151
117605
108222
122605
122116
833123
818087
304136
150301
122700
122604
122701
122801
* As needed.
450566- 3
*
1
5
1
1
1
*
*
1
2
*
1
Qty.
1
1
1
Description
White Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Coral Blue Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Ivory Lint Drawer Assembly
(includes illus. nos. 1 and 2)
White Lock Lint Drawer with Bag
Blue Lock Lint Drawer with Bag
Ivory Lock Lint Drawer with Bag
Neoprene Sponge Tape (sold by the foot)
Lint Screen Assembly
4-Pin Connector (female)
Lint Drawer Switch
Lint Drawer Switch Box Assembly (for micro models Only)
(includes illus. nos. 4 through 6 and 10)
Lint Drawer Switch Box Assembly (for dual timer models Only)
(includes illus. nos. 4 through 6 and 10)
Lint Drawer Switch Box Cover ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector (male)
Socket Terminal ONLY
Pin / Socket Extraction Tool … Not Illustrated www.amdry.com
15
Tumbler / Support Assemblies
6
7
8
9
10
11
2
3
4
5
Illus. No.
1
Part No.
881780
859305
150313
150318
390074
115986
150518
800613
116000
401010
153004
100905
152027
153005
16
40
1
4
1
1
4
4
4
1
8
1
1
Qty.
1
1
Description
Tumbler ONLY
1-3/4” Tumbler / Support Assembly Complete
(includes illus. nos. 1 through 6 and 8 through 11)
#10-16 x 1/2” TORX ® Head Crimptite Screw
TORX PLUS ® Bit 1/4” Hex (for removal of TORX ® head screw)
Tumbler Rib
Felt Tumbler Pad
(for models mfd. as of January 22, 2002)
5/16-18 x 3/4” Socket Button Head Screw
(for models mfd. prior to January 22, 2002)
Tumbler Support
Felt Collar
#847 Adhesive for Felt Collar (5 oz. tube)
3/8” Flat Washer
3/8-16 x 37” Tie Rod
3/8-16 Hex Nut
3/8” Lock Washer
American Dryer Corporation 450566- 3
Tumbler Bearing Assembly
For Models with Setscrew Type Bearings
Illus. No.
3
4
1
2
5
14
15
16
17
18
19
20
10
11
12
13
8
9
6
7
21
22
23
24
450566- 3
Part No.
880220
153025
152050
883387
882544
882543
882542
880202
880779
150601
153004
153004
153005
152005
154326
152004
150621
153002
153004
150501
102120
883386
100735
884042
101118
101110
100108
150610
152004
1
4
1
4
6
2
2
2
2
2
2
2
2
1
1
1
1
2
2
1
1
1
1
1
1
Qty.
4
1
1
4
Description
1-3/4” Flange Bearing
9/16” Lock Washer
9/16-12 Hex Nut
Pillow Block Bearing Assembly Complete (for microprocessor models Only)
(includes illus. nos. 4 through 18, 23, and 24)
Pillow Block Bearing Assembly Complete (for dual timer models Only)
(includes illus. nos. 4 through 17, 23, and 24)
Pillow Block Bearing Platform ONLY (for microprocessor models Only)
Pillow Block Bearing Platform ONLY (for dual timer models Only)
1-3/8” Pillow Block Bearing (for dual timer models Only)
1-3/8” Pillow Block Bearing (for microprocessor models Only)
3/8-16 x 2” Hex Bolt
3/8” Flat Washer
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-24 x 3/8” Setscrew
5/16-18 Hex Nut
5/16-18 x 1-1/2” Tap Bolt
5/16” Lock Washer
3/8” Flat Washer
5/16-18 x 3/4” Tap Bolt
Sintered 8 Magnet (for microprocessor models Only)
Rotational Sensor Assembly (for microprocessor models Only)
Shaft Key (for reversing models Only)
18” Pulley (for non-reversing models Only)
18-3/4” Pulley (for reversing models Only)
1” Taper Lock Bushing (for reversing models Only)
5L-680 V-Belt (tumbler to idler)
5/16-18 x 1-1/2” Allen Setscrew
5/16-18 Hex Nut www.amdry.com
17
Tumbler Bearing Assembly
For Models with Grip Lock Type Bearings
Illus. No.
3
4
1
2
Part No.
883735
153025
152050
883736
883734
882543
882542
883710
883737
150601
153004
153004
153005
152005
152004
150621
153002
153004
150501
102120
883386
100735
884042
101118
101110
100108
100270
150610
152004
100272
5
14
15
16
17
18
19
10
11
12
13
8
9
6
7
20
21
22
23
24
25
18
1
1
1
6
4
2
4
2
2
2
2
2
2
1
1
1
1
2
2
1
1
1
1
1
1
1
Qty.
4
1
1
4
Description
1-3/4” Flange Bearing
9/16” Lock Washer
9/16-12 Hex Nut
Pillow Block Bearing Assembly Complete (for microprocessor models Only)
(includes illus. nos. 4 through 18, 23, and 24)
Pillow Block Bearing Assembly Complete (for dual timer models Only)
(includes illus. nos. 4 through 17, 23, and 24)
Pillow Block Bearing Platform ONLY (for microprocessor models Only)
Pillow Block Bearing Platform ONLY (for dual timer models Only)
1-3/8” Pillow Block Bearing (for microprocessor models Only)
1-3/8” Pillow Block Bearing (for dual timer models Only)
3/8-16 x 2” Hex Bolt
3/8” Flat Washer
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-18 Hex Nut
5/16-18 x 1-1/2” Tap Bolt
5/16” Lock Washer
3/8” Flat Washer
5/16-18 x 3/4” Tap Bolt
Sintered 8 Magnet (for microprocessor models Only)
Rotational Sensor Assembly (for microprocessor models Only)
Shaft Key (for reversing models Only)
18” Pulley (for non-reversing models Only)
18-3/4” Pulley (for reversing models Only)
1” Taper Lock Bushing (for reversing models Only)
5L-680 V-Belt (tumbler to idler)
Grip Lock Collar (1-3/8”)
5/16-18 x 1-1/2” Allen Setscrew
5/16-18 Hex Nut
Grip Lock Collar (1-3/4”)
American Dryer Corporation 450566- 3
Idler Bearing Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
450566- 3
Part No.
100108
101140
100194
100109
154301
100705
882576
150617
153005
153004
801009
152004
150509
Qty.
2
1
1
1
1
1
1
2
1
2
2
1
1
Description
5L-680 V-Belt
14” x 3” Compound Pulley
4L-550 V-Belt (idler to motor) Non-Reversing Models ONLY
4L-650 V-Belt (idler to motor) Reversing Models ONLY
5/16-18 x 1” Allen Setscrew
3/16” x 3/16” x 1-3/8” Key
Idler Bearing Assembly Complete
(includes illus. nos. 5 through 12)
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
Idler Square Washer
5/16-18 Hex Nut
5/16-18 x 3” Hex Head Machine Bolt www.amdry.com
19
Non-Reversing Motor Mount Assembly
20 American Dryer Corporation 450566- 3
Part No.
100194
100701
101130
101139
150501
153002
153001
100073
181050
100069
100068
122701
122801
137030
152004
153002
153001
117604
154000
850018
803876
823212
803877*
803879*
153051
882670
Non-Reversing Motor Mount Assembly
450566- 3 www.amdry.com
21
Reversing T.E.F.C. Motor Mount Assembly
22 American Dryer Corporation 450566- 3
Reversing T.E.F.C. Motor Mount Assembly
14
15
16
17
18
10
11
12
13
Illus. No.
1
2
3
6
7
4
5
8
9
100007*
120200
150501
153002
153001
154000
152004
153002
153001
850021
803882*
Part No.
100109
100701
101130
101139
120200
181003*
150501
153002
153001
100075*
803879*
117604
153051
100714
882670
802100
19
20
21
22
100604
23
24
153050
152006
* Specify voltage when ordering.
** As required.
**
2
1
7
7
8
7
1
1
4
4
1
4
Qty.
4
4
1
1
4
1
1
1
1
1
1
1
1
4
1
1
1
Description
4L-650 V-Belt (to idler assembly)
3/16” x 3/16” x 1” Key
5/8” x 2-1/2” Motor Pulley (60 Hz Only)
5/8” x 2-3/4” Motor Pulley (50 Hz Only)
3/8” x 90° Connector
1/2 hp 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor (56Z frame)
5/16-18 x 3/4” Tap Bolt
5/16” Lock Washer
5/16” Flat Washer
1 hp 200-240/460-380-415 3ø 50/60 Hz
(for models mfd. as of February 8, 2003)
1/2 hp 220/230/380/460v 3ø 50/60 Hz
(for models mfd. prior to February 8, 2003)
3/8” x 90° Connector
5/16-18 x 3/4” Tap Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 Nut
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Reversing Motor Mount ONLY (56Z frame)
60 Hz Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
50 Hz Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
Noise Suppression Tape (sold by the foot)
3/4” Flat Washer
3/16” x 3/16” x 1-7/8” Key
16” Impellor (3/4” Bore)
(for models mfd. as of February 8, 2003)
16” Impellor (1/2” bore)
(for 60 Hz models mfd. between August 29, 2002 and February 8, 2003 and 50 Hz models mfd. between August 2, 2002 and February 8, 2003)
12-1/2” Impellor (1/2” bore)
(for 60 Hz models mfd. prior to August 29, 2002 and 50 Hz models mfd. prior to August 2, 2002)
1/2” Flat Washer
1/2-20 Left Hand Jam Nut
450566- 3 www.amdry.com
23
Sensor Bracket Assemblies
24 American Dryer Corporation 450566- 3
Sensor Bracket Assemblies
Illus. No.
1
Part No.
880251
19
20
21
22
23
24
15
16
17
18
11
12
13
14
7
8
9
10
4
5
2
3
6
322214
122604
122700
150301
150005
130111
130100
130103
130101
153010
152000
840065
121028
122701
122605
818007
130103
153010
152000
121028
122701
122801
122605
154007
150005
817046
818034 25
26
27
28
* As required.
322062
122604
122700
122801
150301
Qty.
1
1
1
*
*
*
1
1
*
1
1
*
1
4
2
1
1
1
2
4
1
2
1
2
2
1
2
1
*
1
1
1
2
Description
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 through 4)
225° Hi-Limit Thermostat
#6 Star Washer
#6-32 Hex Nut
Insulated Terminal
Socket Terminal
Pin / Socket Extraction Tool
4-Pin Connector (female)
1/4” Push-On Fastener
#6-32 x 1/4” Round Head Machine Screw
Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 10)
Microprocessor Sensor Bracket ONLY
4-Pin Connector (male)
Pin Terminal
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6-32 x 1/4” Phillips Round Head Machine Screw
130° Thermostat
150° Thermostat
225° Hi-Limit Thermostat
180° Thermostat
#6 Star Washer
#6-32 Hex Nut
Sensor Jumper
Insulated Terminal
Socket Terminal
4-Pin Connector ONLY (female)
Sensor Bracket Harness Assembly
(includes illus. nos. 21 through 24)
Noncomputer Sensor Bracket Assembly Complete (includes thermostats)
(includes illus. nos. 14 through 25)
Universal Sensor Bracket ONLY
4-Pin Connector (male)
Pin Terminal
Pin / Socket Extraction Tool
#8-18 x 7/16” Phillips Pan Head TEK Screw
450566- 3 www.amdry.com
25
Direct Spark Ignition Burner Assembly
26 American Dryer Corporation 450566- 3
Direct Spark Ignition Burner Assembly
Illus. No.
Part No.
Qty.
Description
1*
2
3
4
5
6**
7
8
9
10
817086
817137
810047
141105
141210
318714
128927
880960
882230**
140819
140803
150103
151001
150300
884265
884279
883031
1
1
1
4
1
1
1
1
1
4
4
4
4
5
1
1
1
23
24
25
26
19
20
21
22
27
28
29
30
31
15
16
17
18
11
12
13
14
150309
152013
883849
810029
142707
142506
142600
142809
319704
151000
150001
130201
318700
143000
154004
802799
122200
150303
105500
319202
154002
1
1
4
1
1
1
9
2
1
2
2
1
1
1
1
1
1
2
1
1
1
* Burner orifices are not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.
Natural Gas Burner Assembly Complete
(includes illus. nos. 1 through 31)
Liquid Propane Gas Burner Assembly Complete
(includes illus. nos. 1 through 31)
Burner Box ONLY
Large Burner Tube
3/4” Direct Spark Ignition Manifold (4-port)
Bracket for Horizontal Facing Gas Valve
1/2” 24 VAC Redundant (natural gas) Gas Valve
1/2” 24 VAC Direct Spark Ignition Liquid Propane Gas Valve Assembly
ML-758 Liquid Propane Conversion Kit
#30 Burner Orifice (natural gas) ONLY
#49 Burner Orifice (liquid propane gas) ONLY
#8-32 x 3/4” Phillips Round Head Machine Screw
#8-32 Pal Nut
#10-16 x 1/2” Hex Washer TEK Screw
Ignitor Probe Assembly
High Voltage Wire with 1/4” Spade Connection
High Voltage Wire with Socket Connection
(for models with spike style connection at module)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#6-32 Hex Nut
Direct Spark Ignition Module with High Voltage Wire
Direct Spark Ignition Module Mounting Bracket
1/2” x 1-1/2” Long Black Nipple
1/2” Street Elbow
1/2” Black Union
1/2” x 29-1/8” Nipple
Hi-Limit Mounting Bracket
#6-32 Pal Nut
#6-32 x 1/2” Phillips Round Head Machine Screw
330º Hi-Limit Manual Reset
Pipe Bracket (bent)
3/4” to 1/2” Reducing Coupling
Twin Speed Nut
Sail Switch Box Cover and Bracket ONLY
Sail Switch ONLY
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push-On Fastener
450566- 3 www.amdry.com
27
Electric Oven Assembly
28 American Dryer Corporation 450566- 3
Electric Oven Assembly
Illus. No.
Part No.
Qty.
Description
1
2
3
4
9
10
11
12
7
8
5
6
13
14
15
24
25
26
27
28
29
30
20
21
22
23
16
17
18
19
835059
803007
––––––*
––––––*
150300
802800
802801
121010
152014
––––––*
150207
120081
120080
152008
121011
––––––*
153009
313781
320607
154004
150300
802799
122200
150303
105500
319202
154002
150300
803100
313787
320611
150301
130400
150300
154001
1
1
1
—
2
1
1
1
2
1
1
2
1
1
1
2
1
1
1
2
1
2
2
1
3
1
2
—
—
—
—
—
—
1
1
Large Electric Oven Box ONLY (for microprocessor models)
Large Electric Oven Box ONLY (for dual timer models)
Electric Oven Assembly Complete
Electric Element
#10-16 x 1/2” Hex Washer TEK Screw
Sail Switch Box with Bracket and Cover ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 4 through 12)
Twin Speed Nut
#10-16 x 1/2” Hex Washer TEK Screw
Sail Switch Box Cover and Bracket ONLY
Sail Switch
#4 x 3/4” Phillips Pan Head Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push-On Fastener
#10-16 x 1/2” Hex Washer TEK Screw
Electric Oven Front Cover
Large Relay Box Cover (for microprocessor models)
Large Relay Box Cover (for dual timer models)
#8-18 x 7/16” Phillips Pan Head TEK Screw
290° Hi-Limit Thermostat
#10-16 x 1/2” Hex Washer TEK Screw
#10-24 Speed Nut
L-70 Ground Lug
1/4-20 Free Spin Wash Nut
Oven Relay
#10-24 x 1/2” Phillips Pan Head Machine Screw
Internal Ceramic Insulator (2 per element)
External Ceramic Insulator (2 per element)
#10-32 Hex Nut (4 per element)
Bus Bar (sold by the foot)
Oven Wiring
#10 Star Washer (2 per element)
Large Electric Oven Right Side Cover (for microprocessor models)
Large Electric Oven Right Side Cover (for dual timer models)
* Refer to Electric Oven Component Application Charts on page 42 and 43.
450566- 3 www.amdry.com
29
Air-Operated Steam Damper Assembly
Part No.
165009
153002
152004
152002
153007
820321
803415
153007
152002
115995
102350
151007
152007
100497
100492
152002
153007
100472
143110
100472
100496
143238
100498
150002
153010
152000
330987
152002
153007
100520
Illus. No.
5
6
7
3
4
1
2
20
21
22
23
16
17
18
19
12
13
14
15
8
9
10
11
24
25
26
27
28
29
30
30
Qty.
4
2
1
6
4
1
6
1
1
1
1
1
1
4
4
1
1
1
1
4
4
108
1
2
2
1
2
1
2
2
Description
Steam Coil Assembly
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
Steam Damper Hinge Assembly
Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
1/4” Lock Washer
1/4-20 Hex Nut
Steam Damper Gasket (sold by the inch)
Steam Damper Foam (68-1/2” length)
7/16-20 Stainless Steel Acorn Nut
7/16-20 Hex Nut
1-1/4” Bore x 3” Stroke Piston
Piston Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/4” x 1/8” Connector
1/4” Tubing (sold by the foot)
1/4” x 1/8” Connector
1/8” Needle Valve
1/8” Close Nipple
3-Way Micro Valve – 24 VAC
#6-32 x 1” Slotted Machine Screw
#6 Star Washer
#6-32 Hex Nut
Micro Valve Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/8” N.P.T. Silencer (muffler)
American Dryer Corporation 450566- 3
Fire Suppression System Assemblies
13
14
15
16
17
18
19
20
21
450566- 3
Illus. No.
7
8
5
6
3
4
1
2
9
10
11
12
Part No.
165114
143220
143251
143208
143099
311588
143303
143155
150430
150301
143581
143025
143177
824081
143241
143315
136987
822752
154007
390390
150301
122647
1
1
1
1
1
2
1
2
1
Qty.
6’
1
1
1
1
2
1
1
1
1
2
2
Description
Fire Suppression System Solenoid Valve 24V 50/60 Hz
3/8” F.P.T. Brass Tee
3/8” M.P.T. Brass Plug
3/8” Comp x 3/8” M.P.T. Brass Connector
3/8” OD x 0.035 Wall Copper Tubing (sold by the foot)
Sprinkler Head Mounting Plate
3/8” N.P.T. Brass Locknut
3/8” Brass Elbow 90°
#10 x 1/2” Self-Drilling Screw
#8-18 x 7/16” TEK Screw
3 GPM 3/8” F.P.T. Spray Nozzle
3/8” x 3/4” NH 60 Hz
3/4” M.P.T. x 3/8” Adapt 50 Hz
R.C. Network Assembly
3/8” x Close Brass Nipple
3/8” M.N.P.T. x 1/8” F.N.P.T. Brass Bushing
Water Jet Pressure Switch
(for models mfd. as of December 1, 2003)
Fire Suppression System Temperature Probe Assembly
(includes illus. nos. 17 through 19 and 21)
Push-On Fastener
Sensor Bracket ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Connector ONLY (does not include terminals) www.amdry.com
31
Single-Phase (1ø) Microprocessor Rear Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
151000
150300
150009
120716
322812
830468
830477
830469
830478
830131
2
2
2
1
1
1
1
1
1
1
6
7
8
9
10
11
12
13
14
15
16
132070
822792
136008
136057
150301
150297
152004
121010
153002
132514
132496
121300
131932
* Quantity is 1 for 115v and 2 for 208-240v.
1
1
1
1
*
*
1
1
1
3
1
1
1
#6-32 Pal Nut
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/2” Phillips Pan Head Machine Screw
2-Position Terminal Block
Rear Electric Mounting Plate ONLY
Rear Electric Panel Assembly Complete – 115 Volt (1ø) (for gas models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete – 115 Volt (1ø) (for steam models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete – 208-240 Volt (1ø) (for gas models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete – 208-240 Volt (1ø) (for steam models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete – 208-240 Volt (for electric models Only)
(includes illus. nos. 1 through 14 and 16)
Transformer Assembly 115 – 208-240 Volt (for gas and steam models Only)
Transformer Assembly – 208-240 Volt (for electric models Only)
Fuse Holder
1/2-Amp (Slo-Blo) Fuse
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Green Hex Washer TEK Screw
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor (115 volt models)
3-Pole Contactor (208-240 volt models)
Open / Closed Bushing
24V SPST Relay (for electric models Only)
32 American Dryer Corporation 450566- 3
208-240V 3-Phase (3ø) Microprocessor Rear Electric Relay Panel Assembly
Illus. No.
3
4
5
1
2
6
11
12
13
14
7
8
9
10
15
16
450566- 3
Part No.
151000
150300
150008
120701
322812
830470
830480
830157
132070
822792
136008
136057
150301
150297
152004
121010
153002
132495
121300
131932
33
460-480V Microprocessor Rear Electric Relay Panel Assembly
Illus. No.
10
11
12
13
14
4
5
6
1
2
3
7
8
9
15
16
17
Part No.
150300
150008
120701
135501
132067
120768
120765
150301
150297
152004
121010
153002
132495
322812
830474
830486
830199
151000
131932
112075
34
1
2
1
1
Qty.
Description
1
2
1
1
1
1
1
1
2
2
2
1
2
4
2
1
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
4-Position Terminal Block
2-Pole 1-Amp Circuit Breaker
Transformer 460-480 Volt
35 x 15mm Din Rail
Standard End Bracket
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Green Hex Washer TEK Screw
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Rear Electric Mounting Plate ONLY
Rear Electric Panel Assembly Complete – 460-480 Volt (for gas models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete – 460-480 Volt (for steam models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete – 460-480 Volt (for electric models Only)
(includes illus. nos. 1 through 14)
#6-32 Pal Nut
24V SPST Relay (for electric models Only)
Ground Label
American Dryer Corporation 450566- 3
208-240V Microprocessor Reversing Rear Electric Relay Panel Assembly
Illus. No.
1
2
3
4
5
10
11
12
13
14
6
7
8
9
830482
822789
15
16
17
450566- 3
151000
120765
131932
Part No.
150300
150008
120701
132497
822764
822792
136008
136057
150301
150297
152004
121010
153002
132495
322812
830471
1
2
1
1
Qty.
Description
1
1
2
2
4
2
2
2
1
1
1
1
1
1
1
1
1
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
4-Position Terminal Block
3-Pole Reversing Contactor
Transformer 208-240 Volt (for gas and steam models Only)
Transformer 208-240 Volt (for electric models Only)
Fuse Holder
1/2-Amp (Slo-Blo) Fuse
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Green Hex Washer TEK Screw
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Rear Electric Mounting Plate ONLY
Rear Electric Panel Assembly Complete – 208-240 Volt (3ø) (for gas models Only)
(includes illus. nos. 1 through 16)
Rear Electric Panel Assembly Complete – 208-240 Volt (3ø) (for steam models Only)
(includes illus. nos. 1 through 16)
Rear Electric Panel Assembly Complete – 208-240 Volt (3ø) (for electric models Only)
(includes illus. nos. 1 through 17)
#6-32 Pal Nut
Standard End Bracket
24V SPST Relay (for electric models Only) www.amdry.com
35
460-480V Microprocessor Reversing Rear Electric Relay Panel Assembly
Illus. No.
9
10
11
12
13
14
7
8
5
6
3
4
1
2
15
16
17
18
Part No.
150300
150009
120701
135501
132067
120768
120765
150301
150297
152004
121010
153002
132495
322812
830475
830487
824371
151000
132497
112075
131932
36
1
1
1
1
2
1
Qty.
1
1
1
2
1
2
1
2
4
1
2
1
1
2
2
Description
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/2” Phillips Pan Head Machine Screw
4-Position Terminal Block
2-Pole 1-Amp Circuit Breaker
Transformer 460-480 Volt
35 x 15mm Din Rail
Standard End Bracket
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Green Hex Washer TEK Screw
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Rear Electric Mounting Plate ONLY
Rear Electric Panel Assembly Complete – 460-480 Volt (for gas models Only)
(includes illus. nos. 1 through 16)
Rear Electric Panel Assembly Complete – 460-480 Volt (for steam models Only)
(includes illus. nos. 1 through 16)
Rear Electric Panel Assembly Complete – 460-480 Volt (for electric models Only)
(includes illus. nos. 1 through 17)
#6-32 Pal Nut
3-Pole Reversing Contactor
Ground Label
24V SPST Relay (for electric models Only)
American Dryer Corporation 450566- 3
Single-Phase (1ø) Dual Timer Rear Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
Description
1
2
7
8
9
10
5
6
3
4
11
12
13
14
15
150300
825462
825463
132449
132445
132383
150301
136008
136049
153002
152004
150297
121010
150300
353258
306304
825445
825446
2
1
1
1
1
1
*
*
*
1
1
1
1
2
1
1
1
1
16
17
18
19
150009
120716
151000
121300
2
1
2
3
* Quantity is 1 for 115v and 2 for 208-240v.
#10-16 x 1/2” Hex Washer TEK Screw
24 VAC Transformer (for 115 volt gas models Only)
24 VAC Transformer (for 208-240 volt models Only)
2-Pole Contact Block (for 208-240 volt models Only)
3-Pole Contactor
2-Pole Contact Block (for 120 volt models Only)
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fuse Holder
3/4-Amp (Slo-Blo) Fuse
5/16” Lock Washer
5/16-18 Hex Nut
#10 x 1/2” Green Hex Washer TEK Screw
L-70 Ground Lug
#10-16 x 1/2” Hex Washer TEK Screw
Rear Panel Connector Bracket
Rear Electric Mounting Panel ONLY
Rear Electric Panel Assembly Complete – 115 Volt (for gas models Only)
(includes illus. nos. 1, 2, and 4 through 18)
Rear Electric Panel Assembly Complete – 208-240 Volt (for gas models Only)
(includes illus. nos. 1 through 4 and 6 through 18)
#6-32 x 1-1/2” Phillips Round Head Machine Screw
2-Position Terminal Block
#6-32 Pal Nut
Open / Closed Bushing
450566- 3 www.amdry.com
37
460-480V Dual Timer Rear Electric Relay Panel Assembly
Illus. No.
7
8
5
6
3
4
1
2
9
10
11
12
13
14
15
Part No.
150300
150008
120701
835143
135501
120768
150297
152004
121010
153002
132447
322812
824231
151000
120765
132449
38
Qty.
1
1
1
2
1
1
2
2
1
1
1
1
1
2
2
1
Description
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Round Head Machine Screw
4-Position Terminal Block
24 VAC Transformer (gas models Only)
1-Amp Double-Pole Circuit Breaker
Din Rail (sold by the inch)
#10 x 1/2” Hex Washer TEK Screw – Green
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Rear Electric Mounting Panel ONLY
Rear Electric Panel Assembly Complete (for gas models Only)
(includes illus. nos. 1 through 15)
#6-32 Pal Nut
Din Rail End Stop
2-Pole Contact Block
American Dryer Corporation 450566- 3
208-240V Dual Timer Reversing Rear Electric Relay Panel Assembly
Illus. No.
7
8
5
6
9
3
4
1
2
14
15
16
17
10
11
12
13
450566- 3
Part No.
150009
120701
150300
353258
132497
132495
152004
153002
322812
830236
151000
132449
830238
136008
136057
150301
121010
150297
Qty.
1
1
1
1
1
1
2
1
2
1
1
1
2
2
1
2
2
1
Description
#6-32 x 1-1/2” Phillips Round Head Machine Screw
4-Position Terminal Block
#10-16 x 1/2” Hex Washer TEK Screw
Rear Panel Connector Bracket
Reversing Contactor
Blower Motor Contactor
5/16-18 Hex Nut
5/16” Lock Washer
Rear Electric Mounting Panel ONLY
Rear Electric Panel Assembly Complete (for gas models Only)
(includes illus. nos. 1 through 17)
#6-32 Pal Nut
2-Pole Contact Block
24 VAC Transformer (for gas models Only)
Fuse Holder
1/2-Amp (Slo-Blo) Fuse
#8-18 x 7/16” Phillips Pan Head TEK Screw
L-70 Ground Lug
#10 x 1/2” Hex Washer TEK Screw – Green www.amdry.com
39
Outer Top / Back Guard Assemblies
For Models Mfd. as of January 5, 2003
Illus. No.
Part No.
Qty.
Description
1
2
3*
4
5
6*
7
8
9
322809
150301
314534
314540
150301
150300
312527
320007
314535
314539
103500
1
4
1
1
7
10
1
1
1
1
4
Back Electrical Box Cover
#8-18 x 7/16” Phillips Pan Head TEK Screw
Top Back Guard (for gas models Only)
Top Back Guard (for electric models Only)
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10-16 x 1/2” Hex Washer TEK Screw
Outer Top (for gas models Only)
Outer Top (for electric models Only)
Middle Back Guard
Bottom Back Guard
Leveling Leg
* There is no outer top or top back guard on steam models.
40 American Dryer Corporation 450566- 3
Outer Top / Back Guard Assemblies
For Models Mfd. prior to January 5, 2003
Illus. No.
Part No.
Qty.
Description
1
2
3*
4
5
6*
7
8
9
322809
150301
323738
320008
150301
150300
312527
320007
314518
150301
103500
1
4
1
1
7
10
1
1
1
13
4
Back Electrical Box Cover
#8-18 x 7/16” Phillips Pan Head TEK Screw
Top Back Guard (for gas models Only)
Top Back Guard (for electric models Only)
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10-16 x 1/2” Hex Washer TEK Screw
Outer Top (for gas models Only)
Outer Top (for electric models Only)
Bottom Back Guard
#8-18 x 7/16” Phillips Pan Head TEK Screw
Leveling Leg
* There is no outer top or top back guard on steam models.
450566- 3 www.amdry.com
41
kW Volt Phase Wire
30
30
30
25
208
240
480
380
3ø
3ø
3ø
3ø
3 or 4
3
3 or 4
3 or 4
24 208 3ø 3 or 4
* Consult factory for oven assemblies not listed.
Oven
Assembly *
Part No.
Elements
Qty.
kW Part No.
Qty.
Oven Wire
Size Part No.
Terminal Lug
Qty.
Part No.
835060
833124
6
6
5
5
120012
120013
1
1
#2
#4
823066
882566
1
1
121010
121010
Bus Bar
P/N
121011
826222
833136
835054
6
6
6
5
5
4
120013
120013
120010
1
1
1
#8
#8
#4
882572
882571
882566
1
1
1
121010
121010
121010
1
1
1
1
1
Oven
Relay
Part No.
131362
131363
131357
131357
131363
kW
30
30
Volt
208
240
Phase
3ø
3ø
Wire
3 or 4
3
Oven
Assembly *
Part No.
Elements
Qty.
kW Part No.
Qty.
Oven Wire
Size Part No.
Terminal Lug
Qty.
Part No.
825376
840259
6
6
5
5
120012
120013
1
1
#2
#4
823066
882566
1
1
121010
121010
Bus Bar
P/N
121011
1
1
30 416
30 460/480
3ø
3ø
3 or 4
3 or 4
835064
834804
6
6
5
5
120013
120013
1
1
#8
#8
882571
882572
1
1
121010
121010
24 208 3ø 3 or 4 816138 6 4 120010 1 #4 882566 1 121010 1
* When ordering oven assembly complete, specify 3-wire or 4-wire when applicable, as well as if dryer has microprocessor controller (computer) or non-microprocessor controls.
1
1
Oven
Relay
Part No.
131362
131363
131357
131357
131363
Additional Parts Available
Part No.
120600
120800
120802
120902
120903
121014
121499
121500
112075
112280
114001
114006
117505
120100
120400
120500
122804
404502
404515
404516
882458
Description
1/2” Dia. Ground Symbol Label
“Clean Lint Screen” Label
“CAUTION – Exhaust / Lint Screen” Label
“WARNING – Fire Hazards” Label
Aluminum Duct Tape (sold by the foot)
3/8” Straight (BX) Connector
3/8” Red Jacket (BX) Insulator
3/8” Jiffy Clip (BX retainer clip)
3/8” Greenfield (BX)
1/4” In-Line Connector
Red Butt Connector
#74B Wire Nut
Closed End Connector
1/4” Insulated (female) Terminal
5-1/2” Wire Tie
8” Harness Tie
Manometer (hydro gauge) for Measuring Gas Pressure
White Brush-In-Cap Bottle Touch-Up Paint
Coral Blue Brush-In-Cap Bottle Touch-Up Paint
Ivory Brush-In-Cap Bottle Touch-Up Paint
Tumbler Puller Assembly
44 American Dryer Corporation 450566- 3
Notes
450566- 3 www.amdry.com
45
ADC Part No. 450566 3 - 04/17/08 - 0
advertisement
Related manuals
advertisement