advertisement
AD-170SE
Parts Manual
Phase 5 Microprocessor Models
Single / Dual Timer Models
1994 thru 2001
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
www.amdry.com
ADC Part No. 450147 - 11
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.
The following “ FOR YOUR SAFETY ” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ________________________________________________ MODEL NO.
AD-170SE
RESELLER’S NAME _________________________________________________________________________________
Serial Number(s) _____________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Table of Contents
Control Door Assembly
Illus. No.
Part No.
1
4
5
2
3
6
7
* 820944
820963
160005
117600
150309
102600
102601
102505
* Specify color when ordering.
4
Qty.
1
1
9
1
2
5
1
1
Description
Control Door Assembly (for gas models Only)
Short Control Door (for steam models Only)
Spring Turn Latch (2-piece)
Gasket (sold by the foot)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Control Door Support Rod Catch
Control Door Rod Retainer Clip
Control Door Support Rod
American Dryer Corporation 450147 - 11
Microprocessor Control Panel Assembly
Illus. No.
1
2 *
Part No.
112535
112276
112275
112277
112278
821024
821101
881055
5
6
3
4
7
8
821102
137225
150005
153010
150000
150309
136048
* Specify color when ordering.
Qty.
1
1
1
1
1
1
1
1
1
1
2
2
3
1
1
Description
Non-Coin English Keypad Label Assembly
Non-Coin Stick-On Labels (English Only) … Not Illustrated
3-Language Non-Coin Stick-On Labels (Spanish, Italian, and Hebrew) … Not Illustrated
3-Language Non-Coin Stick-On Labels (English, Spanish, and Hebrew) … Not Illustrated
5-Language Non-Coin Stick-On Labels
(Italian, Dutch, French, German, and Chinese) … Not Illustrated
Computer Door Complete
(includes illus. nos. 1 through 8)
Computer Door ONLY
Computer Door Complete with Battery Option
(includes illus. nos. 1 through 8)
Computer Door with Battery Bracket ONLY
Phase 5 Non-Coin Reversing Microprocessor Controller with Air Jet
#6-32 x 1/4” Phillips Round Head Screw
#6 Star Washer
#6-32 x 1/4” Slotted Round Head Machine Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/8-Amp (Slo-Blo) Fuse ONLY
IMPORTANT: Check label on computer chip to verify correct part number.
450147 - 11 www.amdry.com
5
Control Box Assembly
For Microprocessor and Timer Models
Illus. No.
Part No.
7
8
5
6
3
4
1
2
9
10
11
12
13
14
15
16
17
18
* As required.
150301
150100
132070
151001
150002
120715
151000
150309
121010
122705
122801
122626
122704
122625
122800
136057
150301
136008
124812
151000
6
Qty.
1
2
*
1
1
1
1
*
1
1
2
2
2
1
2
1
1
2
6
2
Description
#8-18 x 7/16” Phillips Pan Head TEK Screw
#8-32 x 1/2” Phillips Round Head Machine Screw
Transformer – 24 VAC (for microprocessor models Only)
#8-32 Pal Nut
#6-32 x 1” Phillips Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
L-70 Ground Lug
Socket Terminal ONLY
Pin / Socket Extraction Tool
15-Pin Connector ONLY
Pin Terminal ONLY
15-Pin Connector ONLY
Microprocessor (female) Pin Extraction Tool
1/2-Amp (Slo-Blo) Fuse ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fuse Block / Strip ONLY
30-Second Air Jet Timer (for timer models Only)
#6-32 Pal Nut
American Dryer Corporation 450147 - 11
Dual Timer “Tap Touch” Controls
For Models Mfd. as of April 12, 2001
Illus. No.
7
8
5
6
3
4
1
2
9
10
11
12
13
14
15
450147 - 11
824068
153010
152000
150207
150110
112563
124104
124105
Part No.
824298
824299
824175
122301
131932
120708
151000
824297
Qty.
6
1
3
1
1
1
1
1
1
1
4
1
3
2
–
2
Description
15 Minute Timer – 24 VAC
60 Minute Timer – 24 VAC
Red Pilot Light – 24 VAC
“Tap Touch” Switch
24 VAC Relay
3, Terminal Closed Block
#6-32 Pal Nut
Dual Timer Panel Complete
(includes illus. nos. 1 through 15)
Dual Timer Panel ONLY
#6 Star Washer
#6-32 Hex Nut
#10-24 x 1/2” Phillips Pan Head Machine Screw
#8-32 x 1/4” Phillips Round Head Machine Screw
Dual Timer Panel Overlay
Pure Touch Knob with Red Pointer
Pure Touch Knob with Blue Pointer www.amdry.com
7
Dual Timer Control Panel Assembly
For Models Mfd. Between January 3, 1995 and April 12, 2001
Illus. No.
1
2
3 *
Part No.
123005
122400
881056
8
9
10
11
6
7
4
5
12
13
14
15
16
* Specify color when ordering.
821118
131917
150207
154001
152000
120708
150110
131931
151000
112050
124103
124025
124030
150301
8
Qty.
1
1
1
2
1
2
1
1
1
2
1
2
1
2
2
1
1
Description
Red Light Indicator – 24 VAC
Rocker Heat Selector Switch
Dual Timer Control Panel Assembly Complete
(includes illus. nos. 1 through 15)
Dual Timer Control Panel
Push-To-Start Relay – 24 VAC
#10-24 x 1/2” Round Head Machine Screw
#10-24 Speed Nut
#6-32 Hex Nut
Terminal Strip
#8-32 x 1/4” Phillips Round Head Screw
Dual Timer Relay – 24 VAC
#6-32 Pal Nut
Dual Timer Label ONLY
Arrow Timer Knob
60 Minute Timer – 24 VAC
15 Minute Timer – 24 VAC
#8-18 x 7/16” Phillips Pan Head TEK Screw
American Dryer Corporation 450147 - 11
Single Timer Control Panel Assembly
For Models Mfd. prior to January 3, 1995
Illus. No.
1 *
Part No.
881054
14
15
16
17
10
11
12
13
8
9
6
7
4
5
2
3
821015
131917
154001
124025
150110
112048
124103
123005
122400
150207
120707
153010
152000
150301
153012
152001
332257
* Specify color when ordering.
450147 - 11
Qty.
1
2
2
2
5
1
1
2
1
2
1
1
2
1
2
1
1
1
Description
Single Timer Control Panel Assembly Complete
(includes illus. nos. 1 through 17)
Single Timer Control Panel ONLY
Push-To-Start Relay – 24 VAC
#10-24 Speed Nut
60 Minute Timer – 24 VAC
#8-32 x 1/4” Phillips Round Head Machine Screw
Single Timer Label ONLY
Arrow Timer Knob
Red Light Indicator – 24 VAC
Rocker Heat Selector Switch
#10-24 x 1/2” Phillips Pan Head Machine Screw
Terminal Strip
#6 Star Washer
#6-32 Hex Nut
#8-18 x 7/16” Phillips Pan Head TEK Screw
#8 Star Washer
#8-32 Hex Nut
Single Timer Drawer Stop www.amdry.com
9
Front Panel / Main Door Assemblies
For Models Mfd. as of August 31, 2000
Illus. No.
3
4
1
2
5
8
9
6
7
10
11
Part No.
883081
150683
151012
883082
102214
170730
152014
150120
151010
883083
883080
882411
883084
883085
170330
154215
102360
154270
150685
10
12
13
14
15
16
1
1
1
1
2
2
1
2
2
Qty.
6
1
1
1
1
1
1
1
1
4
Description
Door Hinge (black)
1/4-20 x 5/8” Carriage Bolt
#10-32 Acorn Nut (white)
Black Main Door Handle
30” Door Glass
Door Glass Adhesive (10.3 oz. cartridge)
1/4-20 Free Spin Wash Nut
Main Door Latch Screw (#10-32 dome hex head screw)
#10-32 Acorn Nut
Black Main Door Assembly Complete
(includes illus. nos. 2 through 10)
Black Main Door Ring
Extruded Steel Door Gasket
White Front Panel Assembly
(includes illus. nos. 1, 15, and 16)
Coral Wrinkle Blue Front Panel Assembly
(includes illus. nos. 1, 15, and 16)
Friction Door Latch
5/32” Pop Rivet
0.0625 x 0.125 Black Gasket
1” Spacer
1/4-20 x 1.75 Carriage Bolt
American Dryer Corporation 450147 - 11
Front Panel / Main Door Assemblies
For Models Mfd. prior to August 31, 2000
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
6
7
8
9
*
**
10
11
12
13
14
15
16
820929
150309
150412
112360
870011
170340
154200
102308
102210
170730
150401
306801
102102
150309
180151
180150
800265
800128
800122
800125
150430
180155
*
*
1
15
12
1
1
3
6
1
1
1
3
6
6
9
1
1
1
1
1
1
11
1
Right-Hand Front Panel Assembly
(includes illus. nos. 1, 5, and 6)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#10-16 x 3/4” Phillips Round Head Crimptite Screw
ADC Logo ONLY
Logo Double Tape Kit
3-1/2” Stainless Steel Striker Pad
5/32” Pop Rivet
Door Gasket ONLY (94” length)
20-7/16” Door Glass ONLY
Door Glass Adhesive (10.3 oz. cartridge)
#10-24 x 1-1/4” Phillips Taptite Screw
Magnet Keeper ONLY
1.0 x .750 x .215 Main Door Magnet ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
35” Gray Main Door Handle
(for models mfd. as of March 8, 1993)
35” Gray Main Door Handle
(for models mfd. prior to March 8, 1993)
Main Door Assembly Complete with Gray Handle
(includes illus. nos. 7 through 14)
Stainless Steel Main Door Assembly Complete with Gray Handle
(includes illus. nos. 7 through 14)
Main Door Assembly with Glass and Gasket ONLY
(includes illus. nos. 7, 8, and 14)
Stainless Steel Main Door Assembly with Glass and Gasket ONLY
(includes illus. nos. 7, 8, and 14)
#10 x 1/2” Phillips Pan Head Self-Drilling Machine Screw
35” Gray Main Door Hinge Block ONLY
* Specify color when ordering.
** Logo tape kit is not included and must be ordered separately.
450147 - 11 www.amdry.com
11
Main Door Switch Assembly
For Models Mfd. as of September 9, 2000
12
7
8
9
10
Illus. No.
3
4
1
2
5
6
Part No.
150006
152013
153010
137005
150443
881687
881695
881702
881700
150443
881441
881735
881440
881736
153031
1
1
1
2
1
1
1
Qty.
1
1
4
1
2
1
2
2
Description
#6-32 x 7/8” Phillips Pan Head Machine Screw
#6-32 Hex Nut
#6 Star Washer
Single-Pole Door Switch
1/4-20 x 3/4” Stainless Steel Cap Screw
White Main Door Switch Housing ONLY
Blue Main Door Switch Housing ONLY
White Main Door Switch with Housing Assembly
(includes illus. nos. 1 through 4 and 6)
Blue Main Door Switch with Housing Assembly
(includes illus. nos. 1 through 4 and 6)
1/4-20 x 3/4” Stainless Steel Cap Screw
White Bottom Hinge Block
Blue Bottom Hinge Block
White Top Hinge Block
Blue Top Hinge Block
Nylon Washer
American Dryer Corporation 450147 - 11
Main Door Switch Assembly
For Models Mfd. prior to September 9, 2000
Illus. No.
3
4
1
2
5
6
450147 - 11
Part No.
821097
150309
102405
137005
121028
180155
Qty.
1
1
1
2
2
1
Description
Main Door Switch Bracket Assembly
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Main Door Switch Actuator
Main Door Switch ONLY
1/4” x 0.032 Insulated Terminal ONLY
35” ADC Gray Main Door Terminal Block ONLY www.amdry.com
13
Lint Door Assembly
Illus. No.
1 *
2
3
4
Part No.
820945
117605
117602
150309
117604
117600
Qty.
1
5
5
5
5
5
Description
Lint Door Assembly
(includes illus. nos. 1, 2, and 4)
Neoprene Sponge Tape (sold by the foot)
(for models mfd. as of August 6, 1998)
Noise Suppressor Tape (sold by the foot)
(for models mfd. prior to August 6, 1998)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Neoprene Sponge Tape (sold by the foot)
(for models mfd. as of August 6, 1998)
Noise Suppressor Tape (sold by the foot)
(for models mfd. prior to August 6, 1998)
* Specify color when ordering.
14 American Dryer Corporation 450147 - 11
Lint Drawer / Lint Drawer Switch Box Assemblies
For Models Mfd. as of August 30, 1999
Illus. No.
1
2
3
4
5
Part No.
882792
882793
122116
122605
122701
122801
882507
8
9
6
7
10
11
12
450147 - 11
150301
122700
122604
150301
319076
319077
150301
Qty.
2
1
1
1
1
1
1
1
1
14
1
2
4
2
Description
White Lint Drawer / Screen Assembly
Coral Wrinkle Blue Lint Drawer / Screen Assembly
Lint Drawer Switch ONLY
4-Pin Socket Connector
Socket Terminal ONLY
Pin / Socket Extraction Tool
Lint Drawer Switch Box Assembly Complete
(includes illus. nos. 3 through 6)
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector
#8-18 x 7/16” Phillips Pan Head TEK Screw
Right-Hand Divider Panel
Left-Hand Divider Panel
#8-18 x 7/16” Phillips Pan Head TEK Screw www.amdry.com
15
Lint Drawer / Lint Drawer Switch Box Assemblies
For Models Mfd. Between December 1, 1994 and August 30, 1999
Illus. No.
7
8
5
6
3
4
1 *
2
9
Part No.
821046
820925
150002
136992
153010
152000
122605
122701
122801
821119
821116
10
332348
150309
* Specify color when ordering.
16
1
1
2
Qty.
2
4
2
2
1
1
2
1
1
1
Description
Lint Drawer Assembly
Lint Screen Assembly ONLY
#6-32 x 1” Phillips Round Head Machine Screw
Lint Drawer Switch ONLY
#6 Star Washer
#6-32 Hex Nut
4-Pin Socket Connector ONLY
Socket Terminal ONLY
Pin / Socket Extraction Tool
Lint Drawer Switch Assembly Complete
(includes illus. nos. 3 through 10)
Lint Drawer Switch Mounting Bracket Assembly ONLY
(includes illus. nos. 3 and 4)
Lint Drawer Switch Mounting Bracket ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
American Dryer Corporation 450147 - 11
Lint Drawer / Lint Drawer Switch Box Assemblies
For Models Mfd. prior to December 1, 1994
Illus. No.
1
2
*
Part No.
820955
117605
117602
3
4
5
6
7
820925
122116
122605
122701
122801
800264
8
9
10
11
304034
150301
122700
122604
150301
* Specify color when ordering.
450147 - 11
Qty.
1
5
5
2
8
1
1
1
1
8
2
1
4
2
Description
Lint Drawer Assembly Complete
(includes illus. nos. 1 and 2)
Neoprene Sponge Tape (sold by the foot)
(for models mfd. as of August 6, 1998)
Noise Suppressor Tape (sold by the foot)
(for models mfd. prior to August 6, 1998)
Lint Screen Assembly ONLY
Lint Drawer Switch ONLY
4-Pin Socket Connector
Socket Terminal ONLY
Pin / Socket Extraction Tool
Lint Drawer Switch Box Assembly Complete
(includes illus. nos. 4 through 7)
Lint Drawer Switch Box ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector
#8-18 x 7/16” Phillips Pan Head TEK Screw www.amdry.com
17
Microprocessor Temperature Sensor Bracket Assembly
18
8
9
10
11
4
5
2
3
6
7
Illus. No.
1
Part No.
820968
820967
150005
153010
130112
152000
121028
122701
122801
122605
154007
880251
150301
Qty.
1
4
1
2
2
2
1
1
2
1
2
1
4
Description
Microprocessor Temperature Sensor Bracket Complete
(includes illus. nos. 1 through 10)
Microprocessor Temperature Sensor Bracket ONLY
#6-32 x 1/4” Phillips Round Head Machine Screw
#6 Star Washer
225° Large Automatic Reset Thermostat ONLY
#6-32 Hex Nut
1/4” x 0.032 Insulated Terminal
Socket Terminal ONLY
Pin / Socket Extraction Tool
4-Pin Socket Connector
1/4” Push-On Fastener
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 6 through 10)
#8-18 x 7/16” Phillips Pan Head TEK Screw
American Dryer Corporation 450147 - 11
Timer Temperature Sensor Bracket Assembly
Illus. No.
1
Part No.
821016
2
3
4
5
6
7
8
9
10
11
12
13
450147 - 11
820999
150005
153010
130101
152000
121028
122701
122801
122605
150301
130109
130107
130103
831701
Qty.
1
1
1
1
4
1
1
4
1
5
4
5
1
1
5
Description
Timer Temperature Sensor Bracket Complete
(includes illus. nos. 1 through 13)
Timer Temperature Sensor Bracket ONLY
#6-32 x 1/4” Round Head Machine Screw
#6 Star Washer
180° Large Thermostat ONLY
#6-32 Hex Nut
1/4” x 0.032 Insulated Terminal
Socket Terminal ONLY
Pin / Socket Extraction Tool
4-Pin Socket Connector
#8-18 x 7/16” Phillips Pan Head TEK Screw
140° Large Thermostat ONLY
160° Large Thermostat ONLY
225° Large Automatic Reset Thermostat ONLY
Sensor Jumper (4) ONLY www.amdry.com
19
Tumbler / Support Assemblies
Illus. No.
Part No.
Qty.
Description
1
6
7
8
4
5
2
3
9
10
11
12
13
820979
881639
821001
820927
881640
821023
150309
332140
150500
100910
332139
332177
881555
820909
152009
153013
153014
100810
116007
* 1
1
1
1
1
1
64
4
1
12
4
**
1
1
12
12
12
***
1
Galvanized Tumbler ONLY without Felt Collar
Galvanized Tumbler and Support Assembly Complete
(for models mfd. as of August 27, 1997)
(includes illus. nos. 1 through 13)
Galvanized Tumbler and Support Assembly Complete
(for models mfd. prior to August 27, 1997)
(includes illus. nos. 1 through 13)
Galvanized Tumbler and Support Assembly Complete
(includes illus. nos. 1 through 13)
Stainless Steel Tumbler and Support Assembly Complete
(for models mfd. as of August 27, 1997)
(includes illus. nos. 1 through 13)
Stainless Steel Tumbler and Support Assembly Complete
(for models mfd. prior to August 27, 1997)
(includes illus. nos. 1 through 13)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Galvanized Tumbler Rib ONLY
5/16-18 x 3/4” Socket Button Head Screw
1/2-13 x 44” Tie Rod
Tumbler Reinforcing Plate ONLY
Tumbler Shim ONLY
Tumbler Support ONLY
(for models mfd. as of August 27, 1997)
Tumbler Support ONLY
(for models mfd. prior to August 27, 1997)
1/2-13 Hex Nut
1/2” Lock Washer
9/16” Flat Washer
3-1/8” Retaining Ring
Felt Collar ONLY
* Felt collar is not included and must be ordered separately.
** As required.
*** One piece for models mfd. as of August 27, 1997. Two pieces for models mfd. prior to August 27, 1997.
20 American Dryer Corporation 450147 - 11
Tumbler Bearing Mount Assembly
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
6
7
8
9
*
10
11
12
13
26
27
28
29
22
23
24
25
18
19
20
21
14
15
16
17
100703
101217
101137
100137
101182
150602
153016
100242
880883
153016
153015
152010
150600
152005
821175
820910
880883
150603
152011
152005
153005
153004
150600
153004
100801
332153
100810
153018
153007
150512
824807
880841
1
1
1
2
1
4
4
1
1
4
4
4
2
2
1
1
1
2
2
2
2
4
2
2
2
1
**
2
2
2
1
1
1/2” x 1/2” x 2” Key
2-1/2” SFX Bushing with Key
(for models mfd. as of August 27, 1997)
2-1/4” SFX Bushing
(for models mfd. prior to August 27, 1997)
AB-91 V-Belt (tumbler to idler)
25” Tumbler Pulley ONLY
5/8-11 x 3” Hex Head Machine Bolt
5/8” Flat Washer
2-1/2” Pillow Block Bearing ONLY
(for models mfd. as of August 27, 1997)
3-1/8” Pillow Block Bearing ONLY
(for models mfd. prior to August 27, 1997)
5/8” Flat Washer
5/8” Lock Washer
5/8-11 Hex Nut
3/8-16 x 1-1/2” Hex Head Machine Bolt
3/8-16 Hex Nut
Tumbler Bearing Mount ONLY
(for models mfd. as of August 27, 1997)
Tumbler Bearing Mount ONLY
(for models mfd. prior to August 27, 1997)
3-1/8” Pillow Block Bearing ONLY
1/2-13 x 3” Square Head Machine Bolt
1/2-13 Hex Nut
3/8-16 Hex Nut
3/8” Lock Washer
3/8” Flat Washer
3/8-16 x 1-1/2” Hex Head Machine Bolt
3/8” Flat Washer
5/8” Retaining Ring
5/8” Hinge Pin
1/8” Retaining Ring
1/4” Flat Washer
1/4” Lock Washer
1/4-20 x 1/2” Hex Head Machine Bolt
Rotational Sensor Assembly
Rotational Sensor Mounting Bracket
* Replace in matched sets (both belts).
** One piece for models mfd. as of August 27, 1997. Two pieces for models mfd. prior to August 27, 1997.
450147 - 11 www.amdry.com
21
Idler Bearing Mount Assembly
Illus. No.
13
14
15
16
17
9
10
11
12
7
8
5 *
6
1
2
3 *
4
Part No.
101152
101143
100137
101184
100102
101112
100715
332152
880879
150501
150606
150501
150509
153002
152004
153002
820932
18
19
20
21
22
23
24
311401
880879
153011
153026
152011
103005
153002
152004
* Replace in matched sets (both belts).
6
6
4
1
4
4
1
1
22
Qty.
6
4
2
6
1
4
6
1
4
1
1
2
1
2
1
1
1
Description
1-3/8” Bushing
2A3.8 Pulley
AB-91 V-Belt (tumbler to idler)
1-3/8” SK Bushing
3V-740 V-Belt (idler to motor)
19” Idler Pulley
1/4” x 1/4” x 4-5/8” Key
1-3/8” Idler Shaft ONLY
1-3/8” Pillow Block Bearing
5/16” Flat Washer
1/2-13 Hex Head Machine Bolt
5/16-18 x 3/4” Hex Head Machine Bolt
5/16-18 x 3” Hex Head Machine Bolt
5/16” Flat Washer
5/16-18 Hex Nut
5/16” Lock Washer
Idler Bearing Mount Assembly Complete
(includes illus. nos. 7 through 11 and 17 through 24)
Idler Bearing Mount ONLY
1-3/8” Pillow Block Bearing
Flat Washer 9/16” ID, 1-3/8” OD
1/2” Lock Washer
1/2-13 Hex Nut
Idler Adjustment Hinge ONLY
5/16” Lock Washer
5/16-18 Hex Nut
American Dryer Corporation 450147 - 11
T.E.F.C. Tumbler Motor Mount Assembly
Illus. No.
1
2
3 *
4
5
6
7
8
Part No.
101121
101114
101120
100102
120200
150501
153001
100050
800952
820941 **
Qty.
13
14
15
16
9
10
11
12
152004
153002
153001
152004
153002
153001
150619
152005
* Replace in matched sets (both belts).
** Specify color when ordering.
1
2
4
4
4
4
4
4
4
1
1
4
1
1
1
2
1
1
Description
5/8” SK Bushing
2.65” Pulley (for 60 Hz models Only)
3.15” Pulley (for 50 Hz models Only)
3V-740 V-Belt (motor to idler)
3/8” x 90° Connector
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Flat Washer
1 hp 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor (56Z frame)
Tumbler Motor Mount ONLY (56Z frame)
(50/60 Hz) Totally Enclosed, Fan-Cooled Tumbler Motor Mount Assembly Complete
(includes illus. nos. 1, 4 through 11, 15, and 16)
NOTE: Motor pulley must be ordered separately
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
3/8-16 x 3” Hex Head Machine Bolt
3/8-16 Hex Nut
IMPORTANT: For voltages higher than 460V, contact the factory for correct part number of motor or motor mount assembly.
450147 - 11 www.amdry.com
23
Blower Motor Mount Assembly
Illus. No.
Part No.
Qty.
12
13
14
15
16
17
18 *
8
9
10
11
6
7
4
5
1
2
3
100046
100092
101148
101147
101152
101194
100706
152004
153002
153001
821091
153001
153002
150501
152004
150503
332322
153001
153002
150501
100128
100164
* Replace in matched sets (both belts).
4
2
4
4
1
4
4
4
1
4
1
1
1
1
1
1
2
2
1
2
2
2
24
Description
7.5 hp 208-230/460v / 3ø Motor (for 60 Hz models Only)
7.5 hp 230/460v / 3ø Motor (for 50 Hz models Only)
SB x 4.0 Motor Pulley (for 60 Hz models Only)
SB x 4.8 Motor Pulley (for 50 Hz models Only)
SH x 1-3/8” Bushing (for 60 Hz models Only)
SDS x 1-3/8” Bushing (for 50 Hz models Only)
5/16” x 5/16” x 1-3/8” Key
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Motor Mount Adjustment Plate ONLY
5/16” Flat Washer
5/16” Lock Washer
5/16-18 x 3/4” Hex Head Machine Bolt
5/16-18 Hex Nut
5/16-18 x 2” Hex Head Machine Bolt
Motor Mount Adjustment Angle ONLY
5/16” Flat Washer
5/16” Lock Washer
5/16-18 x 3/4” Hex Head Machine Bolt
BX-50 Cogged Belt (motor to fan shaft) for 60 Hz Models ONLY
BX-51 Cogged Belt (motor to fan shaft) for 50 Hz Models ONLY
American Dryer Corporation 450147 - 11
Fan Shaft Mount Assembly
For Gas Models Only
Illus. No.
1
2
3
Part No.
100612
821078
821073
117604
117600
8
9
10
11
12
6
7
4
5
13
152006
153050
332280
881061
153004
153005
152005
100812
880879
170511
14
15
16
17
18
19
20
21
*
170512
154326
153004
153005
150617
101177
100128
100164
100706
101194
* Replace in matched sets (both belts).
2
2
2
1
1
1
2
2
2
4
450147 - 11
4
2
4
4
1
1
1
2
1
2
1
4
4
Qty.
1
1
Description
1-1/4” Bore x 15” Diameter x 6” Blower (fan) Wheel
Fan Shaft Mount Assembly Complete
(includes illus. nos. 1 through 21)
Fan Shaft Mount ONLY
Neoprene Sponge Tape (sold by the foot)
(for models mfd. as of August 8, 1998)
Noise Suppressor Tape (sold by the foot)
(for models mfd. prior to August 8, 1998)
1/2-20 Left-Hand Jam Nut
1/2” Flat Washer
Fan Shaft ONLY
1-3/8” Flange Bearing with Setscrew and Grease Fitting
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
1-3/8” Retaining Ring
1-3/8” Pillow Block Bearing ONLY
(includes illus. nos. 12 through 14)
1/8-27 N.P.T. ZIRC Grease Fitting ONLY
or
1/4-28 Tapered ZIRC Grease Fitting ONLY
5/16-24 x 3/8” Cone Point Setscrew
3/8” Flat Washer
3/8” Lock Washer
#3-16 x 1” Hex Head Bolt
2B x 5.8 Pulley
BX-50 Cogged Belt (fan shaft to motor) for 60 Hz Models ONLY
BX-51 Cogged Belt (fan shaft to motor) for 50 Hz Models ONLY
5/16” x 5/16” x 1-3/8” Key
SDS x 1-3/8” Bushing ONLY www.amdry.com
25
Fan Shaft Mount Assembly
For Steam Models Only
Illus. No.
1
2
3
Part No.
100612
821077
821073
117604
117600
8
9
10
11
12
6
7
4
5
13
152006
153050
332280
881061
153004
153005
152005
100812
880879
170511
14
15
16
17
18
19
20
21
*
170512
154326
153004
153005
150617
101135
100128
100164
100706
101194
* Replace in matched sets (both belts).
2
2
2
1
1
1
2
2
2
4
26
4
2
4
4
1
1
1
2
1
2
1
4
4
Qty.
1
1
Description
1-1/4” Bore x 15” Diameter x 6” Blower (fan) Wheel
Fan Shaft Mount Assembly Complete
(includes illus. nos. 1 through 21)
Fan Shaft Mount ONLY
Neoprene Sponge Tape (sold by the foot)
(for models mfd. as of August 8, 1998)
Noise Suppressor Tape (sold by the foot)
(for models mfd. prior to August 8, 1998)
1/2-20 Left-Hand Jam Nut
1/2” Flat Washer
Fan Shaft ONLY
1-3/8” Flange Bearing with Setscrew and Grease Fitting
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
1-3/8” Retaining Ring
1-3/8” Pillow Block Bearing ONLY
(includes illus. nos. 12 through 14)
1/8-27 N.P.T. ZIRC Grease Fitting ONLY
or
1/4-28 Tapered ZIRC Grease Fitting ONLY
5/16-24 x 3/8” Cone Point Setscrew
3/8” Flat Washer
3/8” Lock Washer
#3-16 x 1” Hex Head Bolt
2B x 5.4 Pulley
BX-50 Cogged Belt (fan shaft to motor) for 60 Hz Models ONLY
BX-51 Cogged Belt (fan shaft to motor) for 50 Hz Models ONLY
5/16” x 5/16” x 1-3/8” Key
SDS x 1-3/8” Bushing ONLY
American Dryer Corporation 450147 - 11
Direct Spark Ignition Burner Assembly
For Models Using Natural Gas Only
Illus. No.
Part No.
Qty.
Description
13
14
15 *
16
9
10
11
12
7
8
5
6
3
4
1
2
17
18
19
20
21
22
23
24
25
26
142929
332117
150309
142817
141302
142724
142602
142581
142548
142581
332487
140017
332486
141240
140839
332114
141110
332121
––––––
332113
331290
128915
880325
880330
305412
151000
130201
151001
821106 **
1
1
1
1
1
1
31
1
1
1
1
1
1
1
4
1
4
1
1
1
1
1
1
1
1
2
1
2
1
1-1/2” to 1” Reducing Coupling
Pipe Bracket
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1” x 28-1/2” Pipe
1” Union Shutoff
1” x 2” Nipple
1” Union
1” x 5” Nipple
1” x 90° Elbow
1” x 5” Nipple
Gas Valve Pipe Bracket
Direct Spark Ignition 1” 24 VAC Redundant (natural gas) Gas Valve ONLY
Gas Valve Pipe Bracket
4-Port Manifold ONLY
#2 Burner Orifice (natural gas) ONLY
Manifold Support ONLY
Burner Tube ONLY
Burner Tube Support ONLY
( refer to Sail Switch Assembly on page 31 )
Burner Box Cover Plate ONLY
Ignitor / Flame-Probe Sight Hole Disc ONLY
PSE-AD1 Ignitor / Flame-Probe ONLY
Ignitor / Flame-Probe Assembly Kit (includes high voltage wire and connector)
Direct Spark Ignition Ignitor High Voltage Wire / Connector ONLY
Direct Spark Ignition Ignitor Gap Feeler Gauge … Not Illustrated
#6-32 Pal Nut
330° Hi-Limit ONLY
#6-32 x 1/2” Round Head Machine Screw
Natural Gas Direct Spark Ignition Burner Assembly Complete Less Orifices
(includes illus. nos. 1 through 14 and 16 through 26)
Burner Box ONLY 820987 1
* Consult factory for elevations over 2,000 feet.
** Orifices are not included and must be ordered separately.
450147 - 11 www.amdry.com
27
Direct Spark Ignition Burner Assembly
For Models Using Liquid Propane Gas Only
28 American Dryer Corporation 450147 - 11
Direct Spark Ignition Burner Assembly
For Models Using Liquid Propane Gas Only
Illus. No.
Part No.
Qty.
Description
7
8
5
6
3
4
1
2
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
—
*
142929
332117
150309
142817
141302
142724
142602
142581
142548
142581
332487
140017
140018
332486
141240
140820
332114
141110
332121
––––––
332113
331290
128915
880325
880330
305410
151000
130201
151001
821107
820987
332256
880978
**
**
1
1
36
1
1
1
1
1
1
1
1
1
1
1
1
4
1
4
1
1
1
1
1
1
1
1
2
1
2
1
1
1
1
1-1/2” to 1” Reducing Coupling
Pipe Bracket
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1” x 28-1/2” Pipe
1” Union Shutoff
1” x 2” Nipple
1” Union
1” x 5” Nipple
1” x 90° Elbow
1” x 5” Nipple
Gas Valve Pipe Bracket
Direct Spark Ignition 1” 24 VAC Redundant (natural gas) Gas Valve ONLY
1” 24 VAC Gas Valve Liquid Propane Conversion Kit
Gas Valve Pipe Bracket
4-Port Manifold ONLY
#29 Burner Orifice (liquid propane gas) ONLY
Manifold Support ONLY
Burner Tube ONLY
Burner Tube Support ONLY
( refer to Sail Switch Assembly on page 31 )
Burner Box Cover Plate ONLY
Ignitor / Flame-Probe Sight Hole Disc ONLY
PSE-AD1 Ignitor / Flame-Probe ONLY
Ignitor / Flame-Probe Assembly Kit
(includes high voltage wire and connector)
Direct Spark Ignition Ignitor High Voltage Wire / Connector ONLY
Direct Spark Ignition Ignitor Gap Feeler Gauge … Not Illustrated
#6-32 Pal Nut
330° Hi-Limit ONLY
#6-32 x 1/2” Round Head Machine Screw
Liquid Propane Direct Spark Ignition Burner Assembly Complete Less Orifices
(includes illus. nos. 1 through 14 and 16 through 27)
Burner Box ONLY
Liquid Propane Burner Baffle Kit ONLY
Direct Spark Ignition Liquid Propane Conversion Kit
* Consult factory for elevations over 2,000 feet.
** Orifices are not included and must be ordered separately.
450147 - 11 www.amdry.com
29
Direct Spark Ignition Module Mount Assembly
For Gas Models Only
30
4
5
2
3
6
7
Illus. No.
1
Part No.
128935
880815
820100
121400
152014
150301
153010
152000
Qty.
1
1
3
1
1
3
4
4
Description
Direct Spark Ignition with Retries
(for models mfd. as of May 8, 2000)
ADC Direct Spark Ignition Module ONLY (50/60 Hz)
(for models mfd. prior to May 8, 2000)
Direct Spark Ignition Module Mount Assembly ONLY
Universal Bushing
1/4-20 Free Spin Wash Nut
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6 Star Washer
#6-32 Hex Nut
American Dryer Corporation 450147 - 11
Sail Switch Assembly
Illus. No.
3
4
1
2
Part No.
105500
319202
154002
802800
802801
7
8
5
6
9
10
450147 - 11
150300
150303
122200
802799
150309
154004
Qty.
1
1
1
1
1
1
1
2
2
2
1
Description
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push-On Fastener
Sail Switch Box with Cover and Bracket ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 1 through 4 and 6 through 10)
#10 x 1/2” Hex Washer TEK Screw
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch ONLY
Sail Switch Box Cover and Bracket ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Twin Speed Nut www.amdry.com
31
Steam Damper Assembly
Illus. No.
5
6
7
3
4
1
2
12
13
14
15
8
9
10
11
16
17
18
Part No.
165017
153002
152004
152002
153007
820321
820994
153007
152002
115995
102350
151007
100499
100500
152002
153007
100472
143110
32
Qty.
4
2
1
6
4
1
6
1
4
1
1
4
4
96
2
4
1
1
Description
Steam Coil ONLY
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
Steam Damper Hinge Assembly
Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
1/4” Lock Washer
1/4-20 Hex Nut
Steam Damper Gasket (sold by the inch)
Steam Damper Foam (68-1/2” length)
7/16-20 Stainless Steel Acorn Nut
1-1/2” Bore x 3” Stroke Piston
Piston Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/4” x 1/8” Connector
1/4” Tubing (sold by the foot)
( refer to Top Console Assembly on page 35 )
American Dryer Corporation 450147 - 11
Microprocessor Reversing Contactor Mounting Panel Assembly
Illus. No.
7
8
5
6
9
3
4
1
2
10
11
12
13
132467
132431
132432
137060
137013
––––––
14
15
16
17
18
19
450147 - 11
150300
150008
120701
151000
150309
120768
Part No.
332346
121010
150108
153001
153002
152004
120765
132465
132439
1
1
4
1
1
1
1
2
4
2
2
9
Qty.
2
1
2
2
1
1
2
1
1
Description
Contactor / Relay Mounting Panel ONLY
L-70 Ground Lug
#8-32 x 1/2” Pan Head Machine Screw
5/16” Flat Washer
5/16” Lock Washer
5/16-18 Hex Nut
End Stop / Bracket
7.5 hp (impellor / blower / fan) Contactor – 24 VAC
208 Volt Blower Overload
(for use on models mfd. for 208/230/240 volt electric service)
380 Volt Blower Overload
(for use on models mfd. for 380/416/460/480/575/600 volt electric service)
Reversing Contactor – 24 VAC
Contactor Replacement Coil – 24 VAC
Arc Suppressor Board (3)
Nylon Standoff
( refer to Step Down Transformer Application Listing on page 42 )
#10 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Slotted Round Head Machine Screw
4-Position Power Distribution Block
#6-32 Pal Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Din Mounting Rail (sold by the inch) www.amdry.com
33
Dual Timer Reversing Relay Mounting Panel Assembly
34
10
11
12
13
14
15
16
17
18
19
20
Illus. No.
7
8
5
6
9
3
4
1
2
Part No.
332346
121010
150108
153001
153002
152004
120765
132465
132439
132467
132431
132432
150100
132198
151001
––––––
150300
150008
120701
151000
150309
120768
1
2
1
1
1
2
1
1
2
4
2
2
9
Qty.
2
1
2
2
1
1
2
1
1
Description
Contactor / Relay Mounting Panel ONLY
L-70 Ground Lug
#8-32 x 1/2” Pan Head Machine Screw
5/16” Flat Washer
5/16” Lock Washer
5/16-18 Hex Nut
End Stop / Bracket
7.5 hp (impellor / blower / fan) Contactor – 24 VAC
Blower Overload
(for use on models mfd. for 208/230/240 volt electric service)
Blower Overload
(for use on models mfd. for 308/416/460/480/575/600 volt electric service)
Reversing Contactor – 24 VAC
Contactor Replacement Coil – 24 VAC
#8-32 x 1/2” Phillips Round Head Screw
Reversing Timer ONLY (50/60 Hz) – 24 VAC
#8-32 Pal Nut
( refer to Step Down Transformer Application Listing on page 42 )
#10 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Slotted Round Head Machine Screw
4-Position Power Distribution Block
#6-32 Pal Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Din Mounting Rail (sold by the inch)
American Dryer Corporation 450147 - 11
Top Console Assembly
Illus. No.
1
4
5
2
3
6
7
*
Part No.
821085
821086
112534
––––––
153007
152005
332323
821105
821104
8
9
10
11
12
13
121104
121105
150615
153018
332132
332186
150300
*
* Specify color when ordering.
450147 - 11
1
1
1
2
4
4
1
1
Qty.
12
12
1
1
1
1
1
1
Description
Top Console Assembly ONLY (for gas models Only)
Top Console Assembly ONLY (for steam models Only)
Phase 5 Non-Coin Program Location Summary Label (for microprocessor models Only)
Dryer Data Label (not for resale by ADC)
1/4” Lock Washer
1/4-20 Hex Nut
32” Wire Channel
Pneumatic Valve Assembly ONLY (for gas models Only)
( refer to Pneumatic Valve Assembly on page 36 )
Pneumatic Valve Assembly ONLY (for steam models Only)
( refer to Pneumatic Valve Assembly on page 37 )
2” x 4” Junction Box ONLY
Junction Box Cover ONLY
1/4-20 x 3/4” Bolt
1/4” Flat Washer
Console Gusset Brace
Control Door Hinge Channel
#10 x 1/2” Hex Washer TEK Screw www.amdry.com
35
Pneumatic Valve Assembly
For Gas Models Only
36
6
7
4
5
8
Illus. No.
1
2
3
Part No.
100520
150002
100498
821105
143268
100472
330987
153010
152000
Qty.
1
1
1
1
1
1
1
1
1
Description
1/8” N.P.T. Silencer (muffler)
#6-32 x 1” Phillips Round Head Machine Screw
3-Way Micro Valve ONLY – 24 VAC
Pneumatic Valve Assembly Complete for Gas Models ONLY
(includes illus. nos. 1 through 8)
1/8” Street Elbow
1/4” x 1/8” Connector
Micro Valve Support Bracket ONLY
#6 Star Washer
#6-32 Hex Nut
American Dryer Corporation 450147 - 11
Pneumatic Valve Assembly
For Steam Models Only
Illus. No.
1
2
3
Part No.
100496
143238
100498
821104
6
7
4
5
8
9
10
450147 - 11
143223
150002
330987
153010
152000
100520
100472
Qty.
2
1
1
3
2
2
2
1
2
1
1
Description
1/8” Needle Valve
1/8” Close Nipple
3-Way Micro Valve ONLY – 24 VAC
Pneumatic Valve Assembly Complete for Steam Models ONLY
(includes illus. nos. 1 through 8)
1/8” F.P.T. Brass Tee
#6-32 x 1” Phillips Round Head Machine Screw
Micro Valve Support Bracket ONLY
#6 Star Washer
#6-32 Hex Nut
1/8” N.P.T. Silencer (muffler)
1/4” x 1/8” Connector www.amdry.com
37
Air Jet Assembly
Illus. No.
3
4
1
2
5
Part No.
332700
143287
143259
143100
821081
332531
152002
153007
143110
143149
38
8
9
6
7
Qty.
2
3
1
1
1
2
5
1
2
1
Description
Air Jet Tube ONLY
1/4” Compression x 1/8” M.P.T. Male Run Tee
1/4” Compression x 1/8” F.P.T. Bulkhead Fitting
1/4” Aluminum Tube (sold by the foot)
Air Jet Mounting Plate ONLY
(includes illus. nos. 1 through 9)
Air Jet Mounting Plate ONLY
1/4-20 Hex Nut
1/4” Lock Washer
1/4” Poly Flo Tubing (sold by the foot)
1/4” x 1/8” M.P.T. 90° Elbow
American Dryer Corporation 450147 - 11
Back Guard Assemblies
For Models Mfd. as of June 16, 1995
Illus. No.
9
10
11 *
12 *
13
—
7
8
5
6
3
4
1
2
* Specify color when ordering.
** As required.
332328
150301
821096
112014
112017
112230
112519
821095
112534
––––––
332295
332309
821092
117505
450147 - 11
Part No.
Qty.
1
1
1
1
1
**
1
1
1
1
1
28
1
1
Description
Bottom Back Guard ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Middle Back Guard ONLY
High Voltage Label ONLY
“ADC Name, Address, Telephone Number” Label
“Installation Instructions” Label
“Routine Maintenance Schedule” Label
Top Back Guard ONLY
“Phase 5 Non-Coin Program Location Summary” Label (for microprocessor models Only)
Dryer Data Label (not for resale by ADC)
Blower Housing Front Access Panel
Side Access Panel
Square Duct to Round Duct Transition Piece Assembly
Aluminum Duct Tape www.amdry.com
39
Back Guard Assemblies
For Models Mfd. prior to June 16, 1995
Illus. No.
9
10
11
12 *
13 *
14
—
7
8
5
6
3
4
1
2
* Specify color when ordering.
** As required.
332328
150301
821096
112014
332347
112017
112230
112519
821095
112534
––––––
332295
332309
821092
117505
40
Part No.
Qty.
1
1
**
1
1
1
1
1
1
1
1
1
34
1
1
Description
Bottom Back Guard ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Middle Back Guard ONLY
High Voltage Label ONLY
Large Reversing Relay Cover
“ADC Name, Address, Telephone Number” Label
“Installation Instructions” Label
“Routine Maintenance Schedule” Label
Top Back Guard ONLY
“Phase 5 Non-Coin Program Location Summary” Label (for microprocessor models Only)
Dryer Data Label (not for resale by ADC)
Blower Housing Front Access Panel
Side Access Panel
Square Duct to Round Duct Transition Piece Assembly
Aluminum Duct Tape
American Dryer Corporation 450147 - 11
Direct Spark Ignition Burner Assembly Specifications
DSI Burner Orifice Specification *
Natural Gas L.P. Gas
Qty.
D.M.S.
Part No.
D.M.S.
Part No.
4 #2 140839
* Consult factory for elevations over 2,000 feet.
#29 140820
DSI Burner Assembly Specifications
Btu/H Rating Natural Gas Part No.
L.P. Gas Part No.
550,000 821106 821107
NOTES: 1. Burner assemblies do not include burner orifices. They must be ordered.
2. When ordering burner assembly specify the model number and serial number of the dryer.
DSI L.P. Kit Specification *
Kit Part No. 880978
* Consult factory for elevations over 2,000 feet.
450147 - 11 www.amdry.com
41
Step Down Transformer Application Listing
NOTE: For voltages of 380 or above.
Heat
Gas/
Steam
Step Down Transformer Application Listing
(Reversing Relay Box)
Voltage
380
416
440
460 / 480
575
Wire
Service
3 or 4
3 or 4
3 or 4
3 or 4
3
Transformer Part Number
Microprocessor Models
132059
132062
Timer Models
132059
132062
132056
132053
132050
132056
132053
132050
42 American Dryer Corporation 450147 - 11
Part No.
120600
120800
120802
120902
120903
120904
121014
121499
114006
112098
112288
114001
120102
120111
120400
120500
121500
122804
404500
404502
404506
404507
880200
Description
“WARNING – Fire Hazards” Label
“Check Rotation” Label
“CAUTION – Lint Compartment” Label
“CAUTION – Exhaust Lint Screen” Label
3/8” Straight (BX) Connector
1/2” Liquidtite 45° Connector
3/8” Red Jacket (BX) Insulator
3/8” Jiffy Clip (BX retainer clip)
3/8” Greenfield (BX)
1/4” In-Line Connector
Red Butt Connector
#74B Wire Nut
Crimp-On Wire Nut
Red Wire Nut
1/4” Insulated (female) Terminal
5-1/2” Harness Tie
8” Harness Tie
15” Manometer (water column test gauge)
Almond Brush-In-Cap Bottle Touch-Up Paint
White Brush-In-Cap Bottle Touch-Up Paint
Beige Brush-In-Cap Bottle Touch-Up Paint
Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
Electrical Terminal (assortment) Kit
Additional Parts Available
450147 - 11 www.amdry.com
43
ADC Part No. 450147 11 - 05/05/10 - 0
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement