IMPORTANT
Notice the following information will help you solve your problems.
Keep this IMPORTANT sheet together with the INSTRUCTIONS book.
• After installing the unit
= Follow the procedure Å described below.
• If the unit does not operate
= Follow the procedure Å described below.
• If a CD is not ejected from the loading slot
= Follow the procedure ı described below. (If the procedure ı does not work, try the procedure Å .)
• If a CD is not recognized (“NO DISC” or “EJECT ERR” appears on the display) even though there is a CD in the loading slot
= Follow the procedure ı described below. (If the procedure ı does not work, try the procedure Å .)
Å To reset the microcomputer
Press the reset button on the front panel using a ball-point pen or a similar tool.
This will reset the built-in microcomputer.
NOTE: Your preset adjustments — such as preset channels or sound adjustments — will also be erased.
Reset button ı To eject a CD by force
While pressing , press and hold for more than 2 seconds. (Be careful not to drop the CD when ejecting.)
button button
01.1.9, 10:44 AM
LVT0732-001A
ImportantSheet-77/55J_f 1