advertisement
Page 1 of 2
Calculite
®
Evolution Lensed Wall Washer
C4MRL
4" Aperture MR16 Reflector Trim
C4ALV
9 5/8"
(245mm)
5" (127mm)
14 3/8"
(365mm)
5 1 3
C4LV
12 5/8"
(321mm)
5" (127mm)
11 3/16"
(284mm)
C4AICLV
10 1/8"
(257mm)
14 3/8"
(365mm)
6 2 4
22 3/8"
(568mm)
9" (229mm)
6" min.*
5 1/4"
6 1/2" max.
9 1/4"
4 1/8" Dia.
5 1/2" Dia.
C4MRLCLW / C4AICLV
6" min. is for up to 3/4" thick ceiling.
.875" Max. Ceiling Thk.
C4MRLCLW / C4LV or
C4MRLCLW / C4ALV
Ceiling Cutout: 5 1/16" (129 mm) Dia.
Reflector Trim
C4MRL CLW
Specular Clear,
White Flange
C4MRL CLP Specular Clear,
Polished Flange
Frame-In Kit
Non-IC 120V/277V
C4LVMU
C4LVE1
Magnetic 120/277V C4ALVMU Magnetic 120/277V
Electronic 120V
Non-IC AirSeal ® 120V/277V
C4ALVE1 Electronic 120V
C4MRL Add suffix. See options for other finishes.
C4LVE2
42-75W
MR16(12V)
Electronic 277V 42-75W
MR16(12V)
Remodel Frame-In Kit
Note: Magnetic transformers may produce audible sound when used with dimmers, which may be objectionable in acoustically critical areas.
Non-IC 120V
IC AirSeal ® 120V
C4AICLVM1
C4AICLVE1
20-50W
MR16(12V)
Magnetic 120V
Electronic 120V
C4LVE1RM 50W Max. MR16 (12V) See C4LVE1RM specification sheet for more information.
Features
1. Aperture Cone: 16 ga. aluminum, 50° visual cutoff to lamp and lamp image.
Keyed to kick reflector to prevent incorrect installation of cone. Hinged, and snaps onto kick reflector for easy tool-less installation. Available with painted white or polished flange. Interchangeable with other Evolution 4 1/2" low voltage trims.
2. Kick Reflector: 16 ga. aluminum. Specular kick reflector with directional spread lens distributes light smoothly for vertical surface wall washing.
3. Directional Spread Lens: High temperature, tempered glass. Precisely contoured to fit onto cone; replaceable.
4. Socket Harness: Porcelain bi-pin socket. Pre-wired with
No. 18 teflon ® leads .
5. Power Harness: Provides power to transformer.
6. Frame-In Kit: Compatible frame-In kits are listed above. See separate frame-in kit specification sheets for details.
Non-IC and Non-IC AirSeal ® - Insulation must be kept 3" away from fixture sides and wiring compartments and must not be placed above fixture in a manner which will entrap heat.
IC-Airseal ® - Fixture may be in direct contact with insulation.
7. Maximum Ceiling Thickness: .875", 1.75" with C4TCA2 accessory
(see C4TCA2 specification sheet for details.)
Options and Accessories
Reflector Finishes 1
Clear: CL Gold: GD
Comfort Clear Diffuse: CCD
1 Specify desired flange
W White, P Polished
White: WH Black: BK
Champagne Bronze: CCZ
Labels
CULUS Listed (suitable for wet locations), I.B.E.W.
Teflon ® is a registered trademark of E.I. DuPont.
US Patent No. 5,957,573. Other US and Foreign Patents Pending.
Type: Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • I0808
Lightolier is a Philips group brand
Page 2 of 2
Lighting Data
Calculite
®
Evolution Lensed Wall Washer
C4MRL
2" Aperture Pinhole MR16 Reflector Trim
Downlight
Candlepower Curve
73W MR16 RL
EXAMPLE: With multiple units located
2’ from wall and 2’ on center, the illumination on the wall 3’ down from the ceiling is 24 f.c. beneath and
23 f.c. between fixtures.
45˚ 45˚
2’
3’
2’
24 f.c.
23 f.c.
25˚ 25˚
Down 5˚ 5˚
Report 0825FR
Efficiency = 47.8%
Wall
Footcandles on Wall From Multiple Units - 73W MR16 FL
Units 2 Feet From Wall
2' 3'
1’ 10 8 10
2’ 21 18 21
3’ 24 23 24
4’ 23 22 23
5’ 19 19 19
6’ 15 15 15
7’ 12 12 12
8’ 10 10 10
9’ 8 8 8
9
7
6
9 3 9
16 11 16
18 13 18
16 14 17
14 12 14
11 10 11
8
7
6
9
7
6
2'
Units 3 Feet From Wall
3'
1’ 2
2’ 7
2
6
2
7
3’ 9 8 9
4’ 11 10 11
5’ 11 10 11
6’ 10 10 10
7’ 9
8’ 8
9
8
9
8
9’ 7 7 7
2
6
8
9
9
8
7
7
6
1
4
6
7
7
7
7
6
6
2
6
8
9
9
8
7
7
6
Conversion Factors:
37W IR and 50W MR16 FL: F.C. x 0.6
37W IR and 35W MR16 FL: F.C. x 0.4
37W IR and 20W MR16 FL: F.C. x 0.2
Footcandles values are averaged and rounded off and are based on a minimum of five units. For fixture-to-wall distances, other than those shown, use maximum of 1 to 1 spacing (distance between fixtures not more than distance to wall) for best results.
Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • I0808
Lightolier is a Philips group brand
advertisement
Related manuals
advertisement