advertisement
Conventional Zone Module
M512ME
• ADM loop technology with
System Sensor/200 protocol
• Integration of conventional and special detectors into the ADM loop
• Output for resetting of detectors
• Setting of module address via decadic rotary switches
Description
The addressable Conventional Zone Module M512ME serves for the integration of conventional detectors,
detectors for intrinsically safe areas and special detectors into an ADM loop with System Sensor/200 protocol. The conventional zone module provides an output for resetting special detectors.
The address of the module is easily selected by means of two integrated decadic rotary switches. The Surface
Mounting Box SMB500 is required for mounting the module.
The module must be powered by an external supply.
Speciļ¬ cations
Operating voltage
Current consumption from loop
Ambient temperature
Dimensions L × W × H (without mounting plate)
Weight
Approval
Order number
Order name
Surface Mounting Box
Dimensions W × H × D
Colour
Weight
Order number
Order name
18 – 32VDC
300µA (quiescent)
-10°C to +60°C
70 × 70 × 32 (mm)
142g
VdS G297009
249045
Conventional Zone Module/Anal./500/SS M512ME
125 × 124 × 55 (mm) cream
155g
249004
Surface Mounting Box for M500/SS SMB500
Building Safety. Building Security.
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
A
M512ME_DBL_LST_EN_0804.PDF • PAGE 1
advertisement
Related manuals
advertisement