Control Module

CR-6

• ADM loop technology with

System Sensor/200 protocol

• 6 independent, dry relay outputs

• Status LED for each output

• Setting of module address via decadic rotary switches

• Mounting in surface mounting box

Description

The addressable Control Module CR-6 serves for the actuation of external devices by means of 6 independent dry relay contacts, via the bidirectional communication on the ADM loop with System Sensor/200 protocol.

The Control Module CR-6 occupies 6 consecutive addresses on the ADM loop. During commissioning, the base address, i.e., the lowest one of the 6 addresses, is set by means of decadic rotary switches.

The optional steel sheet Surface Mounting Box

M200SMB-MM accommodates one Monitor Module

IM-10 or Control Module CR-6.

Specifi cations

Operating voltage

Current consumption

Contact rating

Ambient temperature

Dimensions L × W × H

Weight

Order number

Order name

Surface Mounting Box

Ambient temperature

Dimensions L × W × H

Colour

Weight

Order number

Order name

Supply through loop voltage approx. 1.5mA (quiescent)

2A/30VDC

0°C to +50°C

172 × 147 × 25 (mm)

500g

249116

Control Module 6xRel.Out/Anal./200/SS CR-6

0°C to +50°C

285 × 225 × 62 (mm) cream

2kg

249117

Surface Mounting Box for Multimodule/SS M200SMB-MM

Building Safety. Building Security.

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27

[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED

A

CR-6_DBL_LST_EN_0804.PDF • PAGE 1