Radio Shack 49-2515 Owner's Manual

Add to My manuals

advertisement

Radio Shack 49-2515 Owner's Manual | Manualzz

3

1

5

/ +PEJ"$(9"+PFQQT11WVFQQT"%COGTC www.radioshack.com

OWNER’S MANUAL —

Please read before using this equipment.

Thank you for purchasing a RadioShack 1 /

3 -

Inch B&W Indoor/Outdoor Camera. Your camera is super-small and compact. It is designed for use with a RadioShack 10-Inch

B&W Single Channel Security Monitor (Cat.

No. 49-2514) to provide a safe and secure environment.

Built-in Speaker and Microphone — allow

2-way communication with compatible equipment.

CMOS (Complementary Metal-Oxide

Semiconductor) Sensor — provides superior-resolution B&W images.

%#/'4#"/1706+0)")7+&'.+0'5

Carefully plan where and how you will position the camera and where you will route the cable that connects the camera to the monitor. When planning the installation:

• Select a location for the camera that provides a clear view of the area you want to monitor, is free from dust, and is not in direct sunlight or in line-of-sight of a strong light source .

• Do not install the camera in a location

± "016'" ± "

Though the camera is highly sensitive, it cannot

“see” over a wide area in total darkness. To assist the camera’s night vision, install a 100watt incandescent lamp (rich in infrared radiation) to illuminate the camera’s viewing area. You can also use a small incandescent flood lamp. Halogen lamps, other high pressure outdoor lamps, and fluorescent lighting are infrared-poor and not recommended.

where it will be exposed to high humidity or rain.

49-2515

Passive Infrared (PIR) Sensor — detects motion up to 16.5 feet away from an angle of up to 100°.

Weatherproof — so you can mount the camera indoors or outdoors.

• Plan the cable’s route so it is not close to power or telephone lines, transformers, microwave ovens, or other electrical equipment that could interfere with (or accept interference from) the system.

• Select a location for the camera that has an ambient temperature between –4

°

F

(–20

°

C) and 122

°

F (50

°

C).

• If you plan to install the camera in a location that has conditions not recommended in this manual, consult with a professional installer and consider use of a separate camera cover or housing.

/1706+0)"#0&"+056#..+0)"6*'"%#/'4#

You can mount the camera indoors or outdoors in a permanent location such as a wall or on a movable platform (such as a tripod) for mounting on a desk, shelf, or table.

arm and sleeve together by tightening the screw.

1. Use the base of the camera as a guide, mark the locations for the screw holes on the mounting surface.

2. Drill a starter hole at each marked location. If necessary, drill a third hole (at least 14 mm in diameter) below the mounting holes to permit the camera’s cable to be inserted through the mounting surface.

3. If necessary, insert the supplied drywall anchors into the screw holes.

4. Insert one of the two supplied screws through each of the screw holes in the bracket and into the mounting surface, then tighten each screw until the base is secure.

5. Loosen the screw from the camera’s arm-sleeve and fully insert the base’s arm into the sleeve. Then secure the

5'66+0)"72"6*'"

%#/'4#

%

100'%6+0)

"&

+4'%6.;

"

61

"

6*'

"

/

10+614

1. Connect the camera’s mini-DIN plug into the supplied 59-foot cable’s mini-DIN socket.

2. Connect the 59-foot cable to the monitor’s mini-DIN port.

WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.

CAUTION

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

!

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE COV-

ER OR BACK. NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED PERSONNEL.

!

The lightning symbol is intended to alert you to the presence of uninsulated dangerous voltage within this product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case.

The exclamation symbol is intended to inform you that important operating and maintenance instructions are included in the literature accompanying this product.

#

"+/2146#06"

#

If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for pertinent information.

RRRRý

— Warning

#

— Important

±

— Note

.

— Caution

°

— Hint

©

2002 RadioShack Corporation.

All Rights Reserved.

RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.

7

5+0)

"#18"+

02765

"

14

"

#

"5

9+6%*$1:

1. Connect the extension cable’s mini-DIN plug into the supplied 6-inch adapter cable’s mini-DIN socket.

2. Connect the adapter cable’s yellow end to your TV’s video jack, and connect the white end to your TV’s audio jack.

3. Connect the adapter cable’s red power socket to the supplied DC adapter’s barrel plug.

4. Connect the DC adapter to a standard AC outlet.

%#4'

Keep the camera dry; if it gets wet, wipe it dry immediately. Use and store the camera only in normal temperature environments. Handle

5'48+%'"#0&"4'2#+4

If your camera is not performing as it should, take it to your local RadioShack store for assistance. Modifying or tampering with the

52'%+(+%#6+105

Input Voltage ..................................15 V DC

Lens Angle ..........90° (viewing angle is 76°)

Video Output ................... 1.0 Vp-p, 75 Ohm

Audio Output ..................................1.2 Vp-p

Maximum Audio Output Power

(Speaker) ............................................ 0.4 W

Audio Distortion .................................... <1%

Audio Frequency

Response ......................... 300 Hz to 5 KHz

Resolution ........250,000 pixel, 330 TV lines the camera carefully; do not drop it. Keep the camera away from dust and dirt, and wipe it camera’s internal components can cause a malfunction and might invalidate its warranty.

Minimum Illumination .............. 2 lux @ F2.0

(without IR LED)

0 lux @ F2.0

(with IR LED)

Operating Temperature ............. 4° to 122°F

(–20° to 50°C)

PIR Maximum Range ................100°

×

16.5ft

PIR Detection Angle (H/V) .. Horizontal 100°

Vertical 45°

Dimensions .......... 2 1 /

16

×

3 5 /

16

×

1 3 /

4

inches

(52

×

84

×

45 mm)

Weight (with wire) ................. 5.8 oz (165 g) with a damp cloth occasionally to keep it looking new.

Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.

2

advertisement

Related manuals

Frequently Answers and Questions

What is the main purpose of the RadioShack 49-2515 camera?
The RadioShack 49-2515 camera is designed for indoor and outdoor use, primarily for security and monitoring purposes.
How does the Passive Infrared (PIR) Sensor function?
The PIR sensor detects motion within a 100-degree angle and up to 16.5 feet away, triggering the camera to capture footage.
What type of sensor does the camera utilize?
The RadioShack 49-2515 camera employs a CMOS (Complementary Metal-Oxide Semiconductor) sensor for superior-resolution black and white images.
Can I mount the camera outdoors?
Yes, the camera is weatherproof and can be mounted both indoors and outdoors.
What are some factors to consider when selecting a mounting location?
Choose a location with a clear view, free from dust, direct sunlight, and strong light sources. Avoid areas with high humidity or rain exposure.
How do I connect the camera to my TV?
Utilize the supplied 6-inch adapter cable to connect the camera to your TV's video and audio jacks, and connect the DC adapter to a standard AC outlet.
What is the maximum audio output power of the speaker?
The speaker has a maximum audio output power of 0.4 watts.
What is the minimum illumination required for the camera to operate?
Without the IR LED, the camera requires a minimum illumination of 2 lux at F2.0; with the IR LED activated, it can operate in 0 lux conditions.

advertisement