Sony XM-475GSX Marketing Specifications

2002 SONY MOBILE
PRODUCT GUIDE
XM-475GSX
4/3/2 Channel Amplifier
• 800W max power
• 75W x 4/200W x 2 into 4 W, 20Hz-20kHz, @ 0.04% THD
• 100W x 4 into 2 W, 20Hz-20kHz, @ 0.1% THD
• Differential FET Input Stage
• MOSFET Outputs
• MOSFET Power Supply
• Variable 50-300Hz Hi/Low Pass Filters
• Dual Mode capability
• 40Hz EQ Boost
• RCA & Speaker Level Inputs
• Indicates step-up
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
75 watts per channel minimum continuous average power into 4 ohms, both channels driven from 20 Hz to 20 kHz with no more than
0.04% total harmonic distortion per Car Audio Ad Hoc Committee Standards.
Other Specifications
Circuit system
Inputs
Outputs
Speaker impedance
Maximum outputs
Rated outputs (supply voltage at 14.4 V)
Frequency response
Harmonic distortion
Input level adjustment range
High-pass filter
Low-pass filter
Low boost
Power requirements
Power supply voltage
Current drain
Dimensions
Mass
Supplied accessories
OTL (output transformerless) circuit
Pulse power supply
RCA pin jacks
High level input connector
Speaker terminals
2 – 8 W (stereo)
4 – 8 W (when used as a bridging amplifier)
Four speakers: 170 W × 4 (at 4 W)
Three speakers: 170 W × 2 + 400 W × 1 (at 4 W)
Two speakers: 400 W × 2 (at 4 W)
Four speakers:
75 W × 4 (20 Hz – 20 kHz, 0.04% THD, at 4 W)
100 W × 4 (20 Hz – 20 kHz, 0.1% THD, at 2 W)
Two speakers:
200 W × 2 (20 Hz – 20 kHz, 0.1% THD, at 4 W)
5 Hz – 50 kHz (+0.5 dB, -3 dB)
0.005% or less (at 1 kHz)
0.2 – 6.0 V (RCA pin jacks)
0.4 – 12 V (High level input)
50 – 300 Hz, –12 dB/oct
50 – 300 Hz, –12 dB/oct
0 – 10 dB (40 Hz)
12 V DC car battery (negative ground)
10.5 – 16 V
at rated output: 40 A (4 W)
Remote input: 1.5 mA
Approx. 358 × 50 × 264 mm (w/h/d) (14 1/8 × 2 × 10 1/2 in.) not incl.
projecting parts and controls
Approx. 3.5 kg (7 lb. 11 oz.) not incl. accessories
Mounting screws (4)
Design and Specifications subject to change without notice.
2002 SONY MOBILE
PRODUCT GUIDE
XM-475GSX
4/3/2 Channel Amplifier
Filter Controls
Connections
Right Speakers OUT
Rear Hi Level IN
Low Boost Controls
Ground
Input Level Controls
Input Level Controls
Remote
Low Boost Controls
To battery
Left Speakers OUT
Front Line IN
Rear Line IN
Filter Controls
Test Tone
Dimensions
Front Hi Level IN
Unit: mm (in.)
14 1/8 (358)
12 1/4 (310)
9 1/4 (234)
10 1/2 (264)
2 (50)
ø 1/4 (6)
Design and Specifications subject to change without notice.